ERS PO line item not marked GR-based IV w/GR posted.

Hi SAP Gurus,
We are on ECC 5.0. I have a PO that had the ERS flag ticked for the line item, but not the GR-based IV.
A goods receipt was posted against the line item, but I can't settle the receipt in ERS settlement transaction MRRL.
Is there a way to "update" the goods receipt without reversing it so that I can pick it up in the ERS settlement?
Thanks,
Linda

Hello Linda,
The best way to handle this is Cancle the ALL GR which will open the purchase order again, now you will be able to flag "GR based IR".
Hope this helps,
Regards,
Arif Mansuri
Reward if answer is helpful.

Similar Messages

Splitting sales ord line items to diff deliveries based on max line items

Hi,
I'm trying to split sales order line items to different deliveries based on the max line items on Sales Organization ( TVKO-MAXBI ) . I activated a new routing (copying standard 001 ) but an error is happening
Item 000200: delivery split due to conflicting header data (ZUKRL: M106 <-> M1061)
However the split does not work as expected. Does anyone have any ideas ?
Pls help me
The code is:
data: ITEMNO        LIKE TVKO-MAXBI,
      BILLNO        LIKE TVKO-MAXBI.
*}   INSERT
FORM DATEN_KOPIEREN_601.
*{   INSERT         MTDK905083                                        1
LIKP-VKORG = CVBAK-VKORG.
LIKP-AUTLF = CVBAK-AUTLF.
LIKP-VSBED = CVBAK-VSBED.
LIKP-FKARV = TVAK-FKARV.
LIKP-TRAGR = MAAPV-TRAGR.
Fill field ZUKRL with combination criteria
LIKP-ZUKRL(2)      = CVBAK-VTWEG.
LIKP-ZUKRL+2(2)    = CVBAK-SPART.
    IF NOT TVKO-MAXBI IS INITIAL.
      IF ITEMNO < TVKO-MAXBI.
        ITEMNO = ITEMNO + 1.
      else.
        LIKP-ZUKRL+4(2) = BILLNO + 1.
        ITEMNO = 1.
      endif.
    endif.
LIKP-STAFO = CVBAK-STAFO.
LIKP-STWAE = CVBAK-STWAE.
MOVE CVBAK-KKBER TO LIKP-KKBER.
MOVE CVBAK-KNKLI TO LIKP-KNKLI.
MOVE CVBAK-KKBER TO LIKP-KKBER.
MOVE CVBAK-GRUPP TO LIKP-GRUPP.
MOVE CVBAK-SBGRP TO LIKP-SBGRP.
MOVE CVBAK-CMWAE TO LIKP-CMWAE.
MOVE CVBAK-WAERK TO LIKP-WAERK.                      "46C/note 184914
MOVE CVBAK-CTLPC TO LIKP-CTLPC.
IF LIKP-LFART = TVAK-KORLI.
    LIKP-KLIEF = CHARX.
ENDIF.
MOVE CVBAK-LIFSK TO LIKP-LIFSK.                           "45B
Pick-up sheet number in delivery order processing is external dlv. no.
IF CVBAK-VBKLT EQ VBKLT_AUSL_AUFT OR
     CVBAK-VBKLT EQ VBKLT_AUSL_AUFT_KORR.
    MOVE CVBAK-BSTNK TO LIKP-LIFEX.
ENDIF.
Consignment issue by service agent is external delivery number
IF CVBAK-VBKLT EQ VBKLT_EDL_ENTN OR
     CVBAK-VBKLT EQ VBKLT_EDL_ENTN_KORR.
    MOVE CVBAK-BSTNK TO LIKP-LIFEX.
ENDIF.
*}   INSERT
ENDFORM.

hi friend i solved the problem.. was a mistake on my source... I send u the code to help u in advanced... thanks for your time
data: ITEMNO        LIKE TVKO-MAXBI,
      BILLNO        LIKE TVKO-MAXBI.
*}   INSERT
FORM DATEN_KOPIEREN_601.
*{   INSERT         MTDK905083                                        1
LIKP-VKORG = CVBAK-VKORG.
LIKP-AUTLF = CVBAK-AUTLF.
LIKP-VSBED = CVBAK-VSBED.
LIKP-FKARV = TVAK-FKARV.
LIKP-TRAGR = MAAPV-TRAGR.
Fill field ZUKRL with combination criteria
LIKP-ZUKRL(2)      = CVBAK-VTWEG.
LIKP-ZUKRL+2(2)    = CVBAK-SPART.
    IF NOT TVKO-MAXBI IS INITIAL.
      IF ITEMNO le TVKO-MAXBI.
        ITEMNO = ITEMNO + 1.
      else.
        BILLNO = BILLNO + 1.
        ITEMNO = 1.
      endif.
    endif.
LIKP-ZUKRL+4(3) = BILLNO.
LIKP-STAFO = CVBAK-STAFO.
LIKP-STWAE = CVBAK-STWAE.
MOVE CVBAK-KKBER TO LIKP-KKBER.
MOVE CVBAK-KNKLI TO LIKP-KNKLI.
MOVE CVBAK-KKBER TO LIKP-KKBER.
MOVE CVBAK-GRUPP TO LIKP-GRUPP.
MOVE CVBAK-SBGRP TO LIKP-SBGRP.
MOVE CVBAK-CMWAE TO LIKP-CMWAE.
MOVE CVBAK-WAERK TO LIKP-WAERK.                      "46C/note 184914
MOVE CVBAK-CTLPC TO LIKP-CTLPC.
IF LIKP-LFART = TVAK-KORLI.
    LIKP-KLIEF = CHARX.
ENDIF.
MOVE CVBAK-LIFSK TO LIKP-LIFSK.                           "45B
Pick-up sheet number in delivery order processing is external dlv. no.
IF CVBAK-VBKLT EQ VBKLT_AUSL_AUFT OR
     CVBAK-VBKLT EQ VBKLT_AUSL_AUFT_KORR.
    MOVE CVBAK-BSTNK TO LIKP-LIFEX.
ENDIF.
Consignment issue by service agent is external delivery number
IF CVBAK-VBKLT EQ VBKLT_EDL_ENTN OR
     CVBAK-VBKLT EQ VBKLT_EDL_ENTN_KORR.
    MOVE CVBAK-BSTNK TO LIKP-LIFEX.
ENDIF.

Splitting sales ord line items to diff deliveries based on sched ln date

Hi,
We are trying to split sales order line items to different deliveries based on the schedule line date. I have copied routine FV50C001( vofm -> data transfer -> deliveries -> routine 1)into a custom routine and added the schedule line date xvbep-edatu to the split criteria likp-zukrl. However the split does not work as expected. Does anyone have any ideas ?
Regards.

Hi Aravind,
u said u ve copied the routine into a customised one..but did u chk whether ur customised routine is getting called from the transcation or not?? the routine has to be assigned in config so tbat it is triggered appropriately.. try putting a BP in ur routine n doin the transaction...
Regards

Miro line item not generated

Dear All,
I have facing one issue at the time posting in MIRO.
I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
Post key   description amt                               curr.( USD)
89              Stk.RM -IMP                                     32100.00
96              PL.VND.RM.IMP GR/IR                     32100.00
40              Purchase RM-IMP                            32100.00
50              Purchase offset.                             32100.00
And Miro Posting on date 23/03/2010
Post key   description amt                               curr.( USD)
31           xyz Vendor                                    32100.00
86           PL.VND.RM.IMP GR/IR                    32100.oo
89           Stk.RM -IMP                                    -
40           Purchase RM-IMP                          -
50           Purchase offset.                           -
But when I post for another po in migo on date 03/01/2010
Post key   description amt                               curr.( USD)
89              Stk.RM -IMP                                     76800.00
96              PL.VND.RM.IMP GR/IR                     76800.00
40              Purchase RM-IMP                            76800.00
50              Purchase offset.                             76800.00
and miro posting on date 19/02/2010
Post key   description amt                               curr.( USD)
32            yz Vendor                                       76800.00
86           PL.VND.RM.IMP GR/IR                      76800.00
89           Stk.RM -IMP                                      Line item not generated
40           Purchase RM-IMP                             Line item not generated
50           Purchase offset.                              Line item not generated
Can any one tell why line item not generated for miro posting .
Regards
Milind

Hi,
The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
Other wise it wont show those extra line items
Please check group currency , global currency etc. for your extra line items

Line item not relevant for payment release

Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YL

Do you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks

FI Archiving - System error: Customer/vendor line item not on OI basis

While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
Regards,
Shailesh

Hi Adisha,
This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
Either you wait for the next invoice with big amount but which seems bit impractical..
In this we really need to consult the Accounting Standards to see what it could allow.
Regards,
Chintan Joshi

TDS line item not generated during down payment.

Hi,
TDS line item not generated during down payment to vendors. Advanced tax codes have been properly assigned to vendors.
Kindly help.
Thanks in advance...
Regards,
Sriram.

Hi Sriram,
1.First tell me when you are doing the advance payment tds codes are giving popup or not?
2.Did you check the setting in below path
Assign with holding tax types to company codes:
SPRO>FI>FI GLOBAL>WTX>EWTX>Company code>assign with holding tax to company code.
Regards
Surya

TDS line Item not flowing in Simulation/Entry

Hi Expert,
We made separate tax code for 194A and made all relevant configuration but in vedor invoice entry, tds line item not flowing . Why this happening , please let me know..
Thanks,
Dharmveer

Dear,
Check the field status for the vendor reconciliation GL account.
1. check the field status group assigned to vendor reconciliation GL account in FS03.
2. use transaction OBC4 and select the respective field status group and make all entry optional under TAXES group.
Regards,
Chintan Joshi.

Tds line item not simulating while posting as reference with FBR2

Dear All
When I am posting an Invoice using previous document as reference with Tcode FBR2 WTax line Item not simulating, but while I am posting without reference i.e. with Tcode FB60 it is simulating, this problem i am facing in production server from this fiscal year but in development server it is working properly.
what is the possible cause and how to solve this problem.

Hi,
For WHT cannot be deducted by using F-02 OR FB01. It seems system is using the same transaction in background and not FB60 and hence tds is bnot getting deducted.
Regards
Milind Sonalkar

Error : Balancing Field " Profit Center" in line item not filled

Dear Friends,
I have a specific issue, as my client while posting inventory differences in [MI07] an error is populating as Balancing Field "Profit Center" in line item not filled.
Please help me in solving the issue where we can assign the profit center other than in materal master as they donot maintained any profit center in material master for all materials
Thanks inadvance
Sri

Hi BK , thanks for your answer
in kch3 there are several profit center groups and how can we identify whcih profit center is assigned to whcih profit center group
regards
sri

Itunes - how do i select multiple line items not in sequence ?

itunes - how do i select multiple line items not in sequence ?

Hold down the Command key and click each in succession.
To extend the selection across items that ARE contiguous, use the Shift key.

Display line items not possible!

Hello
I've a very strange situation on the productive system:
I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
- flag on display line items AND
- sort key 001 - POSTING DATE
why??
thanks a lot in advance,
Chiara

No, the answer was not that one, but thanks anyway.
Finally I found the answer in
Forum: Message MSITEM033 in New GL - Cannot Display GL Line Items
note OSS:
- 1323960 Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
- 1149500 Clearing open items by batch input selection
- 1437341 Note 1437341 - Correction of BSEG/Index tables after note 1323960
regards,
Chiara

Line item not copied in SDF /KN when creating based on Return order

Hi,
Anybody , can help me?
I try to replace a damaged good returen by the customer,by doing the follwing actions.
1 Creat return order based on orginal oder.
2. Try to create SDF/KN based on Return oder, but line item is not copied.
How can solve this?
Regards
rajeev

Hi,
Check the copying control betwee these orders in VTLA, and check the item category is maintained in the copying control.
Prase

Service PO sub line items not appearing in PO print out

Hi,
Service PO line items under item details are not appearing on print out...
Where are they stored ..means in which table?
Regards

Hi SSingh,
Has this problem been solved? we have a similar problem here --- after upgrading from 4.6c to ECC6.0, we found that the service PO line items are not being shown in the PO printout. This happens for items that have been marked 'delivery complete'.
How do we get the service lines to print out again? Appreciate any help out there!

Approvers of Rejected line items not getting removed -Process controlled WF

I have developed shopping cart approval using process controlled workflow. We are using SRM 7.0, patch level 9.
Decision set used is item based approval for partial documents (Type 4)
While testing I observed that when I reject any item, the corresponding approvers of that items are not getting removed.
As per your requirement, if we create SC with 2 items A and B. Based on various conditions
2 process levels are determined for item A, say approver X and approver Y at respective level.
3 process levels are determined for item B, say approver X, approver Z1 and Z2.
Approver X, rejects item A and approves item B. Since one item is rejected, the work item is sent to requestor for acceptance. All process levels are of type "Approval". Once the requestor clicks on "Accept" button, the item A, which is rejected gets deleted from the shopping cart.
However now when I see the Approval Process Overview, the current approver shown is Y. The work item is sent to approver Y and the value of the shopping cart is shown as 0.00. Logically the approver Y should have been removed from approval process.
Could you let me know if I am missing any step or do I need to do some coding to get rid of approvers of rejected items.
Regards,
Manish.

We were using N-step process level on the item level contrast to example provide by SAP of N-step process leve on Header level. SAP uses standard tables /SAPSRM/D_WF_015 and /SAPSRM/D_WF_016 to implement the logic. We have customized the solution with logic on same line of sap but using bespoke tbale ZSAPSRM_D_WF_016. Let me know if anyone needs solution.

ERS PO line item not marked GR-based IV w/GR posted.

Similar Messages

Maybe you are looking for