Es-cli Error getting the alarms with getAlarms

Hi All,
We are using Sun Management Center Server Version 4.0 Build: 15,H491 and I am haveing a problem seeing alarms for all clients. We would really appreciate any help.
This is what I am doing and the results:
$ /opt/SUNWsymon/sbin/es-cli
Copyright (c) 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
loginHost: hostname
Password: ********
Login is successful.
getLoadedModules a=rdfnur01The command is currently running in the background.
>
The command has ended its operation.
print== getLoadedModules: Results 1/3 ===============================================
Module Name=Common Config Reader
Module Key=Config-Readerelp
Description=Common Config Reader Module
Agent Name=rdfnur01
Agent Port=1161
Version=1.0
== getLoadedModules: Results 2/3 ===============================================
Module Name=Kernel Reader
Module Key=kernel-reader
Description=Kernel Reader
Agent Name=rdfnur01
Agent Port=1161
Version=2.0
== getLoadedModules: Results 3/3 ===============================================
Module Name=File Scanning [var/adm/messages Log]
Module Key=fscan+syslog
Description=File Scanning
Agent Name=rdfnur01
Agent Port=1161
Version=2.0
================================================================================
getAlarms -lUsing the last output as the input to the current command...
The command is currently running in the background.
>
The command has ended its operation.
print== getAlarms: Results 1/1 ======================================================
Domain=IMS Core Nodes
Agent Name=rdfnur01
Agent Port=1161
State=Fail
Message=Error getting the alarms.
================================================================================
getAlarms a=rdfnur01The command is currently running in the background.
>
The command has ended its operation.
print== getAlarms: Results 1/1 ======================================================
Domain=IMS Core Nodes
Agent Name=rdfnur01
Agent Port=1161
State=Fail
Message=Error getting the alarms.
================================================================================
getAlarms a=rdfnur01The command is currently running in the background.
>
The command has ended its operation.
print== getAlarms: Results 1/1 ======================================================
Domain=IMS Core Nodes
Agent Name=rdfnur01
Agent Port=1161
State=Fail
Message=Error getting the alarms.
================================================================================
>

Hello user13499843,
If you click on the "Alarms" tab for that Agent (rdfnur01) in the Java Console, do you see alarms there either? Do you see alarms in the Alarms tab for any of your Agents? If not... have you applied patches 143323-04 (SPARC) or 143324-05 (x86) on your SunMC Server? Those patches break the Alarms tab in SunMC (a regression) and would also break es-cli in the way that you posted.
Solution: downgrade to 143323-03/143324-04 ... once your Alarms tab works in the Java Console es-cli should work for you as well. You may also want to check the versions of your other SunMC patches (http://forums.halcyoninc.com/showthread.php?t=104)
Regards,
[email protected]

Similar Messages

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Error in license check - Error getting the hardware key

Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan

Error getting the server-side naming service functionality

Hi all,
we are currently setting up the CTS+ activity based transport scenario. Everything seems to be working fine, however, we have to import each transport twice...
Before I go into detail in the error we get I will first describe our landscape. All the configuration we did was done in debate with SAP.
We use the SAP Solution manager (ehp1 SP 4) as the CTS+ server as recommended by SAP and have an NWDI system of which we only use the components DTR and CBS (since CMS is not used anymore in the activity based transport). We have defined three logical ports/RFCs. CTSCONFIG points to the NWDI system. CTSDEPLOY is running on the java stack of the solution manager and is only used for portal content (=epa) transports. CTSDEPLOY_DI is pointing to the NWDI system and is used for all NWDI (=dip) changes. The NWDI is running ehp1 SP3.
In STMS I defined all the non-abap systems (and configured them to use CTSDEPLOY_DI) and created the following transport route:
upload system (IMP) -> DEV -> ACC -> QAS -> PRD
I first attached the used dependencies in a transport request (SAP_BUILDT, EP_BUILDT, etc) these imported just fine. Then I did the SCA files which contain our custom code. I extracted these from the assemble step on our current NWDI system which will be removed as soon as we switch to the new CTS+ environment.
When we import the transport into the runtime systems then we see the DTR and CBS be filled sucesfully for this specific system. However, the transport request itself always fails with errorcode 12 and the error is:
Error during export service registration: Error getting the server-side naming service functionality during getInitialContext opera
tion. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Error getting the server-side naming service functionality during getInitialContext operation.
Error in execution of Web services CTSDEPLOY_DI , exception is cx_cts_file_import_failed
File import canceled
When we then reimport the same transport it will go the second time fine. This is no problem during the setup but will not be workable when we go live ofcourse. Is there anyone who had this issue before as well and have a solution for it?
Kind Regards,
Nico van der Linden...

Hello Nico,
I would need the java trace files to get more info on this issue, but you can start troubleshooting this error with these notes:
#1172252: CTS+, 'attach file': Troubleshooting Guide;
#1003674: Enhancement for non-ABAP systems in CTS;
#1155884: CTS+, configuration 'close coupling': Troubleshooting guide;
Pay special attention to parameter NON_ABAP_WBO_CLIENT, whether it's correctly set on your CTS+ system(s).
Note #1003674 is a must for any CTS+ systems to work properly, as well as having an updated version of the transport programs (tp and R3trans).
Lastly, note #1155884 goes through some JCoException exceptions that commonly take place during CTS+ transports. But again, you need to check the underlying trace files to find the root cause of your issue.
I hope this information helps.
Best regards,
Tomas Black

How to get the itunes with those 3 colored buttons on top left corner ????ner ???

Please help [humble request] ----
I have 3 problems can u please help me out --
1) How to get the itunes with the 3 colored buttons (i'm new to apple ,just 8 days so i dont know much stuff) on top left corner ,i've downloaded thrice from apple's site directly i everytime got the same sort of itunes with 'File' ,'Edit' ,'View' ,'Controls' ,'Store' ,'Adanced' ,'Help' on the top ,and also whenever i open the itunes store (in this itunes) only the app store opens ,now music albums ,movies ,tv shows nothing !!
2) I dont know how to import video files from the computer to itunes
3)i bought an app [fifa 11] ,n downloaded another 1 [contract killer] {ive deleted them and downloaded them thrice ,and they dont sync to my itouch it shows error (0xE800004C)
Please please please help me im getting worried and frustrated
please help me out with this

but illaass
i asked 2 of my frnds both of them have windows n not mac ,both of them are sayin dat they have the coloured buttons one , and i asked them dat how to access the itunes music store they said that when they kliked d itunes store option in the left side a screen appears where 6 -7 categories are there which are music store ,app store ,podcasts ,movies ,tv shows etc . bt when i open it it only shows d app store ,and on the bar only 4 options are ther the home icon , app store , podcasts and itunes u ,and when i klik movies ,tv shows on the left side ,there is an option "browse for movies in the itunes store" i klik it and only the app store opens and nothing else .
and thanks now i know how to import videos
and sigma 1337 ,
ive downloaded the apps 4 -5 times now , still d same error mssg it comes like dis :-
" Some of the apps in your iTunes library were not installed on the ipod "Shomik's ipod" because one or more errors occurred "
please help me im gettin frustrated

HANA Studio installation error: Error getting the version of the native layer: java.lang.UnsatisfiedLinkError: no sapjco3 in java.library.path

When attempting to add the ADT to HANA Studio I get the error:
Error getting the version of the native layer: java.lang.UnsatisfiedLinkError: no sapjco3 in java.library.path
Additionally I get something about a possibly missing Microsoft Runtime DLL VS2010.
When I then attempt to add ABAP Projects I get the error:
An error has occurred. See error log for more details.
com/sap/mw/jco3/eclipse/Registry
I have tried with sites:
SAP Development Tools for Eclipse - Juno Software Repository
SAP Development Tools for Eclipse - Kepler Software Repository
I have been able to install the ADT on Eclipse-Kepler which is running fine.

I did and on that page the following is stated:
For Windows OS: DLLs VS2010 for communication with the back-end system is required.
NOTE: Install either the x86 or the x64 variant, accordingly to your 32- or 64-Bit Eclipse installation.
This seems exactly to address the issue I am grapling with, but when downloading and trying to install the file I get the message that the current version on my frontend is more recent than the version I am trying to install.
Is that not strange?

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

Scheduled report failures - Unexpected error getting the HTTP response

Getting this error when scheduled report executes:
Unexpected error getting the HTTP response stream while generating report: http://cdmdb1c.nam.nsroot.net:4889/em/console/reports/render

Hi..
Thanks for the comment.
Below is how my web.xml entry looks like.
The requirement is to send a 404 error response and that will be handled by a servlet which inturn writes the output to the response object.
     <servlet>
          <servlet-name>ErrorPageServlet</servlet-name>
          <servlet-class>com.test.ErrorPageServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>ErrorPageServlet</servlet-name>
          <url-pattern>/error</url-pattern>
     </servlet-mapping>
     <error-page>
          <error-code>404</error-code>
          <location>/error</location>
     </error-page>>>
the first option to turn off the "show friendly html error pages" works fine.
It would be better if I can get a different solution

DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service

It is really a pain, dissatisfaction, and a lot more when you have Verizon as your service provider. I have been having service for my cellphones with Verizon for over 3 years, and did not have any major problems, so when I moved to my new place I thought it’s better to get the Fios, and have one bill for my all Verizon services. I went online and started to order my products online. During ordering, the chat session opened and I started chatting with the Customer Service Rep in order to get help through the process. When we were in the step that I could order the home phone plan, I saw the International World Plan, and I asked the lady to give me some information about this plan. I asked her that I want to call to my country and I mentioned my country’s name to her as well. I asked her that if this service is available for my country, and she said “Yes” you can call to over 100 countries with this service and she encouraged me to get the 300 minutes service. Since the plan sounded good to me I decided to get the 500 minutes instead of 300 min, and after I ordered my plan, I started calling overseas, and happy that I am paying less than the Phone cards with this plan. On March 26 I received my bill, and saw that Verizon charged me 142 $ for the less than 200 minutes that I called to my country, and there was a Letter “N” in front of each phone calls. I checked the guide to see what does “N” mean, and I saw that it said N means “Denoted calls are NOT listed in World Plan”. Well, thanks to the lady who gave me the wrong information while I was ordering my plan online, but she or the Verizon company is not that much lucky because I printed my chat session the day I ordered my plan since I wanted to have the information of what I actually had ordered. That time I did not think that I may get in trouble like this. Since March 27th, I have been calling Verizon every other day, and I have explained my issue to more than 10 Customer Service Reps, and each of them asked me to fax my chat session to them. I have been faxing that to all the numbers that they gave me, and I am keep faxing them, but do not get any respond. One of the Verizon’s Supervisors, whose name is Mark, called twice on my home phone number during the daytime, around 3 pm, and he left massages. On his second massage, he said that he checked the plan and my country is not listed in the International World Plan. He just said this, and he said that he was going to call me back, but never happened. He also did not leave me any phone number that I could call back. Also, since my cellphones are listed in the same bill as my other products, he could easily see the other numbers that he could call and reach me, but he did not bother himself to do so. I have even changed my home voice mail greeting addressing to Verizon, and left my cellphone number in voice mail greeting. I am so sorry that I have to say this, but this seems a definite fraud to me. I did not know about this plan, and I asked the Customer Service Rep to help me. She was responsible to check my country, or at least let me know how I could find out about the coverage. This is ridiculous, and if Verizon cannot take over this problem, my lawyer will take the action over, and takes the issue to their corporate court. I am not going to give up about this, and I decide to give Verizon about a week or so to solve this issue, but I won’t wait more than that. Just a friendly advice to people who want to get the home service through Verizon: DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service. There is nothing about taking care of customer in this company, and you are going to be stuck with what you get.

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How can I get the variable with the value from Thread Run method?

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
// I should get Inside the run method::: But I get only Inside
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

We want to access a variable from the run method of a
Thread externally in a class or in a method. I presume you mean a member variable of the thread class and not a local variable inside the run() method.
Even
though I make the variable as public /public static, I
could get the value till the end of the run method
only. After that scope of the variable gets lost
resulting to null value in the called method/class..
I find it easier to implement the Runnable interface rather than extending a thread. This allows your class to extend another class (ie if you extend thread you can't extend something else, but if you implement Runnable you have the ability to inherit from something). Here's how I would write it:
public class SampleSynchronisation
public static void main(String[] args)
    SampleSynchronisation app = new SampleSynchronisation();
public SampleSynchronisation()
    MyRunnable runner = new MyRunnable();
    new Thread(runner).start();
    // yield this thread so other thread gets a chance to start
    Thread.yield();
    System.out.println("runner's X = " + runner.getX());
class MyRunnable implements Runnable
    String X = null;
    // this method called from the controlling thread
    public synchronized String getX()
      return X;
    public void run()
      System.out.println("Inside MyRunnable");
      X = "MyRunnable's data";
} // end class MyRunnable
} // end class SampleSynchronisation>
public class SampleSynchronisation
public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run
method "+sathr.x);
// I should get Inside the run method::: But I get
only Inside
class sampleThread extends Thread
public String x="Inside";
public void run()
x+="the run method";
NB: if i write the variable in to a file I am able to
read it from external method. This I dont want to do

How can I get the variable with the value from Thread's run method

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
/* I should get:
Inside the run method
But I get only:
Inside*/
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

Your main thread continues to run after the sathr thread is completed, consequently the output is done before the sathr thread has modified the string. You need to make the main thread pause, this will allow sathr time to run to the point where it will modify the string and then you can print it out. Another way would be to lock the object using a synchronized block to stop the main thread accessing the string until the sathr has finished with it.

How do i get the "open with" option back for pdfs after accidentally hitting the save option which now automatically saves any pdf?

Normally when I click on a pdf I would get an option to "Open With" or Save. I usually just opened pdfs first. I accidentally clicked on the Save option in this dialog box and now when I click on any pdf it automatically asks me where I want to save it. I want to get the "open With" option back, because I don't necessarily want to save a copy of every pdf.

Mountain Lion was released in 2012, so I suppose there might be advice in old threads or on the Apple forums if you don't get a response here right away.

Report to get the Material with Exception message"10" Rescheduling in

Hello All
We want to get the report to get the materials with exception message"10".We can get deatils from T code MD06,but it is restricted to MRP Controller/Vendor and we can get the details from Table "MDKP".Plese provide any report or T code to get the details of the exception message "10"
Thanks
Suresh kumar

Hello
You can use BAPI_MATERIAL_STOCK_REQ_LIST todata from MD04 or BAPI_MATERIAL_MRP_LIST to get data from MD05.
BR
Catano

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.
Ernest

Not sure if I'm following you. I have 4 hard drives installed on my Mac Pro. I had a RAID 5 configured and functional for about 5 months. My battery died on the RAID card. I replaced the battery, seated the RAID card back in the slot I removed it from. When I booted to the USB drive to look in the RAID utility, I could see the battery is charged but my volumes are not showing.
The drives don't show in disk Utility. I built the RAID with the RAID Utility and they did show there. I have a early 2008 Mac Pro, Mavricks OS running Mac Server

Es-cli Error getting the alarms with getAlarms

Similar Messages

Maybe you are looking for