(ES)Eliminar catalyst-total e instalar driver libre(solucionado)

Hola
Resulta que acabo de instalar catayst-total desde aur y no me convence, con las mismas quiero desinstalarlo pero me da muchos errores , ya lo desinstale  con pacman -Rdd catalyst-total e instale xf86-video-ati mesa mesa-demos y no me entraba en el escritorio ,asi que lo volvi a instalar "momentaneamente" hasta ver la manera correcta de desinstalarlos e instalar los libres ...
aver si alguien me abre los ojos porque ando muy perdido :
sudo pacman -Rns catalyst-total
comprobando dependencias...
error: error al preparar la transacción (no se pudieron satisfacer las dependencias)
:: cairo: necesita libgl
:: compiz-xfce: necesita libgl
:: glu: necesita libgl
:: imagemagick: necesita libcl
:: lib32-cairo: necesita lib32-libgl
:: lib32-qt4: necesita lib32-libgl
:: libva: necesita libgl
:: mesa-demos: necesita libgl
:: mplayer: necesita libgl
:: qt4: necesita libgl
:: steam: necesita lib32-libgl
:: xorg-xdriinfo: necesita libgl
Gracias de Antemano....
Last edited by geronimoarch (2013-12-28 09:44:40)

solucionado ,,, elimine catalyst-total con -Rdd otra vez + me fuy a la carpeta /etc/X11/ y borre todos los archivos de xorg.conf , me logee en una tty y reinstale base base-devel xorg-server xorg-xinit xorg-utils xorg-server-utils mesa mesa-demos xf86-video-ati  y reinicie y todo funcionando ok

Similar Messages

  • Seg fault using catalyst(-total) driver for my ATI/intel hybrid card

    I am using a HP Envy 14 with Radeon 5650.
    This is my lspci: http://pastebin.com/5w7SFdrK
    What I've done so far is I've installed xf86-video-intel (for the onboard card) and catalyst-total (from AUR) for the discrete card. I am using the proprietary version since I need the HDMI output.
    Then I've done a aticonfig --initial , blacklisted radeon module in modprobe.d , and then installed the relevant packages for startx to work.
    This is the seg fault log from /var/log/Xorg.0.log: http://pastebin.com/PsPbiXj7
    This is the my xorg.conf: http://www.pastebin.com/NviWjr0i
    I am stuck now, how can I proceed?
    Thanks!

    I wanted to Bump this because I have the same laptop with the same setup and get the same errors.  I have tried all methods suggested for installing the catalyst to this intel/ati setup including the AUR files catalyst and catalyst-utils, the unofficial catalyst repository and the official ATI installer.  Hope somebody might be able to help us out with this.
    Thanks in advance.

  • [solved] lib32-mesa-libgl and catalyst-total are in conflict

    Steam now depends on lib32-mesa-libgl which is in conflict with catalyst-total.
    lib32-mesa-libgl and catalyst-total are in conflict (lib32-libgl)
    I'm not sure where to go from here.
    EDIT:
    catalyst-total was updated 5 minutes after I made this post. The issue has been resolved.
    Last edited by beardedlinuxgeek (2013-02-26 19:32:00)

    I have the same problem, please help

  • Amd catalyst & built-in display driver clash

    Hello,
    I have a core i5 HP pavilion dv6 entertainment notebook pc with the following specs:
    Processor: 2.53Ghz
    RAM: 8 Gb
    Operating system: Win 7 x64
    AMD Radeon HD 6500M/5600/5700 Series: 1 GB
    System Model: 3141se
    I had a recovery partition on my laptop but a while back when I tried to run it, I kept on getting the same error message " your partition is of GPT style or something like that" and I had to wipe the whole drive and tried recovering from the backup DVDs, without any luck.
    Having said that, I installed another copy of Win 7 with the original key provided and it was working fine. A couple of days back I installed a fresh copy of windows and now the problem I am facing is something like that:
    Built-in intel display and AMD display driver installs, but I dont see anything in adapter section. Which means no graphics card is installed. When ever I install AMD catalyst driver, my windows turn black and stay that way forever (even though windows in running normally). 
    Whenever I disable built-in display driver from "device manager" it  works fine. But I have had no luck installing AMD catalyst control, I tried literally every version available. 
    Kindly, help me fix this issue. My Laptop is a crap without the graphics card. 
    quick help would be appreciated.
    Thank you

    Use the recovery media to install the AMD graphics driver softpaq.
    Choose the AMD video graphics softpaq from the list that appears. The following image is an example from a former HP product loan I was provided by HP. What you see will be a bit different since the notebooks are not in the same model range.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Max Hard drive total or per drive?

    I have a ThinkPad Edge E545 with a 1TB HDD.  The max hard drive size is 1TB according to the specs.  I was thinking of upgrading to a SSD.  If I do that, I would like to remove the DVD drive and put my current 1TB HDD in a caddy there.  Is that possible?  Is the 1TB max per drive or total?

    Remember, I was mostly on a G4 MDD and have some experience with a G5. Now that I have a G5 Quad, I am learning stuff each day.
    Research, Read, and Educate yourself.
    If anything, I would have hoped that that was understood from my posts.
    Remember, I only have a Sawtooth, but I know about all PPC Macs........
    http://manuals.info.apple.com/en/PowerMac_G5_Late2005.pdf
    Someone with your post count should at least be aware of "Search Discussions" features.
    They should also be aware of the forum rules and etiquette.
    But, this next question you can help me with. I am looking for a replacement graphics card which will provide more performance than the stock PCIe Nvidia 6600. Can you provide help for me with that?
    http://discussions.apple.com/thread.jspa?threadID=1677926&tstart=0

  • Satellite A100-237: I do not have the Catalyst Control Center after driver installation

    Hello,
    I use a Satellite A100-237 laptop. 1.83 GHz Core Duo, Ati Mobility Radeon X1600 512MB Hypermemory, 1.5GB DDR2 RAM.
    My laptop now seems to use only the own 256 MB RAM (Graphic card's own RAM).
    I purchased Need for Speed Carbon and installed it to my laptop.
    When I tried to open the game, a blue screen appeared for less than 1 seconds, and than system restarted. Windows said that that was a critical error and a driver stopped Windows XP to operate, therefore system is restarted.
    I searched in the net for this problem and, people said that, when they updated the driver the problem is solved.
    I downloaded Display driver 8.241 (download file name: display_xp-8241.zip) from toshiba-europe.com.
    Driver installed but while installing ATI Catalyst Control Center, at a point the installation process stoped continuing. I had to end the task after a while.
    It said that driver is installed and system must be restarted.
    Now the game works, thats not the problem, however I do not have the Catalyst Control Center. (Where I recently use it for connecting other screens to my laptop)
    How can I solve this problem?
    Sorry for long letter,
    Thanks for helps.

    You may run the driver installer again, use the custom installation option and select Catalyst Control Center only. Alternatively, you may remove the entire driver and try re-installing again. I suggest you also download the notebook driver package from ATI's website instead of Toshiba, as their drivers are usually more up-to-date (although it might be less safe to use them, I don't know).
    And BTW, I have the same notebook and I have failed to see an option to set the machine to use the VRAM *only* instead of borrowing from RAM whenever necessary. Any ideas?

  • Instalar AMD Catalyst legacy y normal

    this post lang is: es - spanish - Español
    Hola gente.
    Tengo una AMD Radeon HD 4870 y una AMD Radeon HD 5450.
    La primera entra en la categoria Legacy y la segunda en standart...
    Necesito usar ambas videocard como hago en Windows.
    Cómo puedo hacer para instalar ambas versiones de AMD Catalyst?
    al instalar una funciona todo bien, excelente, casi tan bien como en windows (un 70~80% de su potencial)
    con el open source driver osea 'radeon' tengo un rendimiento como del 10%-20% y muchos gliches graficos
    http://i53.tinypic.com/2rrxchv.png (not my pic)
    http://img.photobucket.com/albums/v284/ … litch2.jpg (not my pic)
    en windows si se puede...
    ayuda?
    Last edited by Cancer (2013-12-06 03:30:32)

    this post lang is: es - spanish - Español
    Hola gente.
    Tengo una AMD Radeon HD 4870 y una AMD Radeon HD 5450.
    La primera entra en la categoria Legacy y la segunda en standart...
    Necesito usar ambas videocard como hago en Windows.
    Cómo puedo hacer para instalar ambas versiones de AMD Catalyst?
    al instalar una funciona todo bien, excelente, casi tan bien como en windows (un 70~80% de su potencial)
    con el open source driver osea 'radeon' tengo un rendimiento como del 10%-20% y muchos gliches graficos
    http://i53.tinypic.com/2rrxchv.png (not my pic)
    http://img.photobucket.com/albums/v284/ … litch2.jpg (not my pic)
    en windows si se puede...
    ayuda?
    Last edited by Cancer (2013-12-06 03:30:32)

  • Proprietary Catalyst Driver Dell Inspiron 7520

    Hello, Archies! I'm new to Arch Linux!
    Well, I'm trying to make works Catalyst Proprietary Driver (catalyst-total-pxp), but it's crashing when I switch to AMD. Intel is working well, without problem. The xorg-server crashes and I need to reboot with CTRL+ALT+DEL or force shutdown sometimes.
    I'm using xorg-server 1.13 and this https://aur.archlinux.org/packages/catalyst-total-pxp/ package.
    * Kernel 3.7 (linux-ck-ivybridge package)
    Anyone manged how to make AMD works with Dell 7520?
    Thanks!
    Last edited by Koblinger (2012-12-20 16:36:42)

    Hi, got to this thread when I googled. Though it is a dated post. I suppose others may be looking for the same answer.
    The steps required to get catalyst working is at https://wiki.archlinux.org/index.php/AMD_Catalyst
    Enjoy

  • My windows volume alias now shows only total drive size, not available?

    Recently I wanted to take my FAT32 windows partition and convert it to NTFS. I also wanted to expand the space allocated to that partition. I didn't want to lose certain programs that I had on the windows drive.
    Someone on these boards recommended a particular command line that is used to convert the FAT32 to NTFS. Then, from there I could use WinClone to clone the drive, expand it, and then put this image back on.
    That all worked fine but now on my Mac desktop, I see the icon/alias for my mac drive and the windows drive. But windows shows only the total allocated hard drive space, not the available space. Is there a way I can have this show available like it used to do?
    Thanks.

    Clayton Rhoades wrote:
    Recently I wanted to take my FAT32 windows partition and convert it to NTFS. I also wanted to expand the space allocated to that partition. I didn't want to lose certain programs that I had on the windows drive.
    Someone on these boards recommended a particular command line that is used to convert the FAT32 to NTFS.
    I wonder how you did that. AFAIK, this is completely impossible from OS X and can only be done from windows. or do you mean a command line in windows?
    Then, from there I could use WinClone to clone the drive, expand it, and then put this image back on.
    That all worked fine but now on my Mac desktop, I see the icon/alias for my mac drive and the windows drive. But windows shows only the total allocated hard drive space, not the available space. Is there a way I can have this show available like it used to do?
    AFAIK, OS X always showed just total capacity for bootcamp partition formatted NTFS when you view it on the desktop. I don't know why that is but I've never seen it different. just a hunch but maybe if you make the NTFS partition writable by using NTFS-3g or NTFS for Mac by Paragon it will show used space too. I suspect Finder might be reading that info from some metadata it stores on the drive itself.
    Thanks.

  • [SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)

    Radeon HD 7790 + Catalyst = Error: unable to open display (null)
    Greetings,
    I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
    I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint)  worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
    I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
    Versions:
    Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
    Catalyst: 14.4-10
    Xorg: 1.14.5-11
    Logs&Configs:
    lsmod
    fglrx 8672295 0
    amd_iommu_v2 7174 1 fglrx
    button 4765 1 fglrx
    fglrxinfo
    Error: unable to open display (null)
    Xorg.0.conf
    [ 2632.576]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 2632.594] X Protocol Version 11, Revision 0
    [ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
    [ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
    [ 2632.619] Build Date: 08 January 2014 01:35:51PM
    [ 2632.629]
    [ 2632.635] Current version of pixman: 0.32.4
    [ 2632.646] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
    [ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2632.690] (==) ServerLayout "aticonfig Layout"
    [ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2632.690] (==) Automatically adding devices
    [ 2632.690] (==) Automatically enabling devices
    [ 2632.690] (==) Automatically adding GPU devices
    [ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2632.690] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2632.690] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2632.690] (II) Loader magic: 0x7fac20
    [ 2632.690] (II) Module ABI versions:
    [ 2632.690] X.Org ANSI C Emulation: 0.4
    [ 2632.690] X.Org Video Driver: 14.1
    [ 2632.690] X.Org XInput driver : 19.1
    [ 2632.691] X.Org Server Extension : 7.0
    [ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
    [ 2632.698] Initializing built-in extension Generic Event Extension
    [ 2632.704] Initializing built-in extension SHAPE
    [ 2632.710] Initializing built-in extension MIT-SHM
    [ 2632.717] Initializing built-in extension XInputExtension
    [ 2632.723] Initializing built-in extension XTEST
    [ 2632.728] Initializing built-in extension BIG-REQUESTS
    [ 2632.734] Initializing built-in extension SYNC
    [ 2632.740] Initializing built-in extension XKEYBOARD
    [ 2632.745] Initializing built-in extension XC-MISC
    [ 2632.751] Initializing built-in extension SECURITY
    [ 2632.756] Initializing built-in extension XINERAMA
    [ 2632.761] Initializing built-in extension XFIXES
    [ 2632.767] Initializing built-in extension RENDER
    [ 2632.772] Initializing built-in extension RANDR
    [ 2632.777] Initializing built-in extension COMPOSITE
    [ 2632.782] Initializing built-in extension DAMAGE
    [ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2632.792] Initializing built-in extension DOUBLE-BUFFER
    [ 2632.797] Initializing built-in extension RECORD
    [ 2632.802] Initializing built-in extension DPMS
    [ 2632.806] Initializing built-in extension X-Resource
    [ 2632.811] Initializing built-in extension XVideo
    [ 2632.816] Initializing built-in extension XVideo-MotionCompensation
    [ 2632.821] Initializing built-in extension XFree86-VidModeExtension
    [ 2632.825] Initializing built-in extension XFree86-DGA
    [ 2632.830] Initializing built-in extension XFree86-DRI
    [ 2632.834] Initializing built-in extension DRI2
    [ 2632.834] (II) "glx" will be loaded by default.
    [ 2632.834] (II) LoadModule: "glx"
    [ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2632.835] compiled for 6.9.0, module version = 1.0.0
    [ 2632.839] Loading extension GLX
    [ 2632.839] (II) LoadModule: "fglrx"
    [ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] Module class: X.Org Video Driver
    [ 2632.863] (II) Loading sub module "fglrxdrm"
    [ 2632.863] (II) LoadModule: "fglrxdrm"
    [ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
    [ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
    [ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
    [ 2632.864] (--) using VT number 2
    [ 2632.885] (WW) Falling back to old probe method for fglrx
    [ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.901] ukiOpenDevice: open result is 11, (OK)
    [ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
    [ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
    [ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
    [ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
    [ 2632.905] (II) Loading sub module "vgahw"
    [ 2632.905] (II) LoadModule: "vgahw"
    [ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
    [ 2632.906] compiled for 1.14.5, module version = 0.1.0
    [ 2632.906] ABI class: X.Org Video Driver, version 14.1
    [ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 2632.906] (==) fglrx(0): Default visual is TrueColor
    [ 2632.906] (**) fglrx(0): Option "DPMS" "true"
    [ 2632.906] (==) fglrx(0): RGB weight 888
    [ 2632.906] (II) fglrx(0): Using 8 bits per RGB
    [ 2632.906] (==) fglrx(0): Buffer Tiling is ON
    [ 2632.906] (II) Loading sub module "fglrxdrm"
    [ 2632.906] (II) LoadModule: "fglrxdrm"
    [ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.908] ukiOpenDevice: open result is 13, (OK)
    [ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.908] (**) fglrx(0): NoAccel = NO
    [ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
    [ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
    [ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
    [ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
    [ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 2632.909] (II) fglrx(0): AC Adapter is used
    [ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 2632.914] (II) Loading sub module "vbe"
    [ 2632.914] (II) LoadModule: "vbe"
    [ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
    [ 2632.915] compiled for 1.14.5, module version = 1.1.0
    [ 2632.915] ABI class: X.Org Video Driver, version 14.1
    [ 2632.915] (II) fglrx(0): VESA BIOS detected
    [ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
    [ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 2632.915] (II) fglrx(0): PCIE card detected
    [ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
    [ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 2632.915] (II) Loading sub module "fb"
    [ 2632.915] (II) LoadModule: "fb"
    [ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2632.916] (II) Module fb: vendor="X.Org Foundation"
    [ 2632.916] compiled for 1.14.5, module version = 1.0.0
    [ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
    [ 2632.916] (II) Loading sub module "ddc"
    [ 2632.916] (II) LoadModule: "ddc"
    [ 2632.916] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
    [ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
    [ 2633.034] (II) Loading sub module "ddc"
    [ 2633.034] (II) LoadModule: "ddc"
    [ 2633.034] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Connected Display0: CRT1
    [ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.034] (II) fglrx(0): EDID Version: 1.3
    [ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.034] (II) fglrx(0): Gamma: 2.20
    [ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.034] (II) fglrx(0): Supported established timings:
    [ 2633.034] (II) fglrx(0): 720x400@70Hz
    [ 2633.034] (II) fglrx(0): 640x480@60Hz
    [ 2633.034] (II) fglrx(0): 640x480@67Hz
    [ 2633.034] (II) fglrx(0): 640x480@72Hz
    [ 2633.034] (II) fglrx(0): 640x480@75Hz
    [ 2633.034] (II) fglrx(0): 800x600@56Hz
    [ 2633.034] (II) fglrx(0): 800x600@60Hz
    [ 2633.034] (II) fglrx(0): 800x600@72Hz
    [ 2633.034] (II) fglrx(0): 800x600@75Hz
    [ 2633.034] (II) fglrx(0): 832x624@75Hz
    [ 2633.034] (II) fglrx(0): 1024x768@60Hz
    [ 2633.034] (II) fglrx(0): 1024x768@70Hz
    [ 2633.034] (II) fglrx(0): 1024x768@75Hz
    [ 2633.035] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.035] (II) fglrx(0): 1152x864@75Hz
    [ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.035] (II) fglrx(0): Supported standard timings:
    [ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.035] (II) fglrx(0): Supported detailed timing:
    [ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.035] (II) fglrx(0): Monitor name: L1918S
    [ 2633.035] (II) fglrx(0): Monitor name:
    [ 2633.035] (II) fglrx(0): EDID (in hex):
    [ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
    [ 2633.036] (II) fglrx(0): EDID for output DFP1
    [ 2633.036] (II) fglrx(0): EDID for output DFP2
    [ 2633.036] (II) fglrx(0): EDID for output DFP3
    [ 2633.036] (II) fglrx(0): EDID for output DFP4
    [ 2633.036] (II) fglrx(0): EDID for output DFP5
    [ 2633.036] (II) fglrx(0): EDID for output DFP6
    [ 2633.036] (II) fglrx(0): EDID for output DFP7
    [ 2633.036] (II) fglrx(0): EDID for output CRT1
    [ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.036] (II) fglrx(0): EDID Version: 1.3
    [ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.036] (II) fglrx(0): Gamma: 2.20
    [ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.036] (II) fglrx(0): Supported established timings:
    [ 2633.036] (II) fglrx(0): 720x400@70Hz
    [ 2633.036] (II) fglrx(0): 640x480@60Hz
    [ 2633.036] (II) fglrx(0): 640x480@67Hz
    [ 2633.036] (II) fglrx(0): 640x480@72Hz
    [ 2633.036] (II) fglrx(0): 640x480@75Hz
    [ 2633.036] (II) fglrx(0): 800x600@56Hz
    [ 2633.036] (II) fglrx(0): 800x600@60Hz
    [ 2633.036] (II) fglrx(0): 800x600@72Hz
    [ 2633.036] (II) fglrx(0): 800x600@75Hz
    [ 2633.036] (II) fglrx(0): 832x624@75Hz
    [ 2633.037] (II) fglrx(0): 1024x768@60Hz
    [ 2633.037] (II) fglrx(0): 1024x768@70Hz
    [ 2633.037] (II) fglrx(0): 1024x768@75Hz
    [ 2633.037] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.037] (II) fglrx(0): 1152x864@75Hz
    [ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.037] (II) fglrx(0): Supported standard timings:
    [ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.037] (II) fglrx(0): Supported detailed timing:
    [ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.037] (II) fglrx(0): Monitor name: L1918S
    [ 2633.037] (II) fglrx(0): Monitor name:
    [ 2633.037] (II) fglrx(0): EDID (in hex):
    [ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2633.037] (II) fglrx(0): Output DFP1 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP2 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP3 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP4 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP5 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP6 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP7 disconnected
    [ 2633.038] (II) fglrx(0): Output CRT1 connected
    [ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
    [ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
    [ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2633.038] (II) fglrx(0): DPI set to (96, 96)
    [ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
    [ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
    [ 2633.038] (II) Loading sub module "ramdac"
    [ 2633.038] (II) LoadModule: "ramdac"
    [ 2633.038] (II) Module "ramdac" already built-in
    [ 2633.038] (==) fglrx(0): NoDRI = NO
    [ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
    [ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 2633.038] (==) fglrx(0): UseFastTLS=0
    [ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
    [ 2633.038] (--) Depth 24 pixmap format is 32 bpp
    [ 2633.038] Loading extension ATIFGLRXDRI
    [ 2633.038] (II) fglrx(0): doing swlDriScreenInit
    [ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.039] ukiOpenDevice: open result is 14, (OK)
    [ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
    [ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
    [ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
    [ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
    [ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
    [ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 2633.039] (II) fglrx(0): swlDriScreenInit done
    [ 2633.039] (II) fglrx(0): Kernel Module Version Information:
    [ 2633.039] (II) fglrx(0): Name: fglrx
    [ 2633.039] (II) fglrx(0): Version: 14.10.2
    [ 2633.039] (II) fglrx(0): Date: Apr 17 2014
    [ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
    [ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
    [ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
    [ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
    [ 2633.040] (II) fglrx(0): DRI initialization successfull
    [ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
    [ 2633.041] (==) fglrx(0): Backing store disabled
    [ 2633.041] Loading extension FGLRXEXTENSION
    [ 2633.041] (**) fglrx(0): DPMS enabled
    [ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 2633.041] (**) fglrx(0): Textured Video is enabled.
    [ 2633.041] (II) LoadModule: "glesx"
    [ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
    [ 2633.043] Loading extension GLESX
    [ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
    [ 2633.043] (II) fglrx(0): GLESX is enabled
    [ 2633.043] (II) LoadModule: "amdxmm"
    [ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
    [ 2633.055] Loading extension AMDXVOPL
    [ 2633.055] Loading extension AMDXVBA
    [ 2633.055] (II) fglrx(0): Enable composite support successfully
    [ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
    [ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
    [ 2633.055] (II) fglrx(0): X context handle = 0x1
    [ 2633.055] (II) fglrx(0): [DRI] installation complete
    [ 2633.055] (==) fglrx(0): Silken mouse enabled
    [ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2633.414] (--) RandR disabled
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.432] ukiOpenDevice: open result is 15, (OK)
    [ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.443] ukiOpenDevice: open result is 16, (OK)
    [ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiDynamicMajor: found major device number 250
    [ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.446] ukiOpenDevice: open result is 16, (OK)
    [ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.526] ukiOpenDevice: open result is 17, (OK)
    [ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiDynamicMajor: found major device number 250
    [ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.527] ukiOpenDevice: open result is 17, (OK)
    [ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
    [ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.546] (II) fglrx(0): OverDrive6 Detected!
    [ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
    [ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.594] (II) LoadModule: "evdev"
    [ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
    [ 2633.595] compiled for 1.14.3, module version = 2.8.2
    [ 2633.595] Module class: X.Org XInput Driver
    [ 2633.595] ABI class: X.Org XInput driver, version 19.1
    [ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.595] (**) Power Button: always reports core events
    [ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.595] (--) evdev: Power Button: Found keys
    [ 2633.595] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2633.595] (**) Option "xkb_rules" "evdev"
    [ 2633.595] (**) Option "xkb_model" "pc104"
    [ 2633.595] (**) Option "xkb_layout" "us"
    [ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.634] (**) Power Button: always reports core events
    [ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.634] (--) evdev: Power Button: Found keys
    [ 2633.634] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2633.634] (**) Option "xkb_rules" "evdev"
    [ 2633.634] (**) Option "xkb_model" "pc104"
    [ 2633.634] (**) Option "xkb_layout" "us"
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
    [ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 2633.635] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
    [ 2633.639] (II) No input driver specified, ignoring this device.
    [ 2633.639] (II) This device may have been added with another device file.
    [ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2633.639] (**) Option "xkb_rules" "evdev"
    [ 2633.639] (**) Option "xkb_model" "pc104"
    [ 2633.639] (**) Option "xkb_layout" "us"
    [ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2633.640] (II) No input driver specified, ignoring this device.
    [ 2633.640] (II) This device may have been added with another device file.
    [ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 2639.300] (II) fglrx(0): Backup framebuffer data.
    [ 2639.333] (II) fglrx(0): Backup complete.
    [ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.732] (II) fglrx(0): Shutdown CMMQS
    [ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
    [ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
    [ 2653.735] (EE)
    [ 2653.740] (EE) Backtrace:
    [ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
    [ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
    [ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
    [ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
    [ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
    [ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
    [ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
    [ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
    [ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
    [ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
    [ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
    [ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
    [ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
    [ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
    [ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
    [ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
    [ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
    [ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
    [ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
    [ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
    [ 2653.857] (EE)
    [ 2653.861] (EE) Segmentation fault at address 0x0
    [ 2653.866] (EE)
    Fatal server error:
    [ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 2653.878] (EE)
    [ 2653.883] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2653.904] (EE)
    [ 2653.908] (EE) Server terminated with error (1). Closing log file.
    xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
    Thanks for your efforts.
    Last edited by Mytrin (2014-05-25 19:09:02)

    I've managed to solve this error:
    (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
    There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
    EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
    Last edited by Mytrin (2014-05-25 19:06:09)

  • Real trouble trying to install Catalyst Legacy

    I'm kind of in trouble trying to install catalyst-total-hd234k package from the AUR
    using yaourt to achieve this, enabled the xorg112 package to downgrade, tried pacman directly and makepkg, same result
    It asks a lot of dependencies conflicting with catalyst drivers, so I accept to remove before downgrading to 1.12
    It goes through like if nothing was up after downgrading, package installs without any error
    Following the AMD Catalyst wiki page in here leads me to have a black screen after reboot
    EDIT 2: Process of reproducing the problem I'm facing
    - I enable the xorg112 repository on top of every other in /etc/pacman.conf
    - Downgrade xorg with
    # pacman -S xorg
    :: There are 79 members in group xorg:
    :: Repository xorg112
    1) xf86-input-acecad 2) xf86-input-aiptek 3) xf86-input-evdev 4) xf86-input-joystick 5) xf86-input-keyboard 6) xf86-input-mouse 7) xf86-input-synaptics
    8) xf86-input-vmmouse 9) xf86-input-void 10) xf86-video-apm 11) xf86-video-fbdev 12) xf86-video-intel 13) xf86-video-v4l 14) xf86-video-vesa
    :: Repository extra
    15) xf86-video-ark 16) xf86-video-ast 17) xf86-video-ati 18) xf86-video-cirrus 19) xf86-video-dummy 20) xf86-video-glint 21) xf86-video-i128
    22) xf86-video-mach64 23) xf86-video-mga 24) xf86-video-modesetting 25) xf86-video-neomagic 26) xf86-video-nouveau 27) xf86-video-nv 28) xf86-video-openchrome
    29) xf86-video-r128 30) xf86-video-savage 31) xf86-video-siliconmotion 32) xf86-video-sis 33) xf86-video-tdfx 34) xf86-video-trident 35) xf86-video-vmware
    36) xf86-video-voodoo 37) xorg-bdftopcf 38) xorg-docs 39) xorg-font-util 40) xorg-fonts-100dpi 41) xorg-fonts-75dpi 42) xorg-fonts-encodings 43) xorg-iceauth
    44) xorg-luit 45) xorg-mkfontdir 46) xorg-mkfontscale 47) xorg-server 48) xorg-sessreg 49) xorg-setxkbmap 50) xorg-smproxy 51) xorg-x11perf 52) xorg-xauth
    53) xorg-xbacklight 54) xorg-xcmsdb 55) xorg-xcursorgen 56) xorg-xdpyinfo 57) xorg-xdriinfo 58) xorg-xev 59) xorg-xgamma 60) xorg-xhost 61) xorg-xinput
    62) xorg-xkbcomp 63) xorg-xkbevd 64) xorg-xkbutils 65) xorg-xkill 66) xorg-xlsatoms 67) xorg-xlsclients 68) xorg-xmodmap 69) xorg-xpr 70) xorg-xprop
    71) xorg-xrandr 72) xorg-xrdb 73) xorg-xrefresh 74) xorg-xset 75) xorg-xsetroot 76) xorg-xvinfo 77) xorg-xwd 78) xorg-xwininfo 79) xorg-xwud
    Enter a selection (default=all):
    warning: downgrading package xf86-input-evdev (2.9.1-1 => 2.7.3-1)
    warning: downgrading package xf86-input-joystick (1.6.2-5 => 1.6.1-1)
    warning: downgrading package xf86-input-keyboard (1.8.0-3 => 1.6.2-1)
    warning: downgrading package xf86-input-mouse (1.9.1-1 => 1.8.1-1)
    warning: downgrading package xf86-input-synaptics (1.8.1-1 => 1.6.2-1)
    warning: downgrading package xf86-input-vmmouse (13.0.0-5 => 12.9.0-1)
    warning: downgrading package xf86-input-void (1.4.0-7 => 1.4.0-3)
    warning: downgrading package xf86-video-fbdev (0.4.4-3 => 0.4.3-1)
    warning: downgrading package xf86-video-intel (2.99.917-1 => 2.20.2-2)
    warning: downgrading package xf86-video-v4l (0.2.0-14 => 0.2.0-10)
    warning: downgrading package xf86-video-vesa (2.3.2-5 => 2.3.2-1)
    warning: xf86-video-ark-0.7.5-5 is up to date -- reinstalling
    warning: xf86-video-ast-0.97.0-5 is up to date -- reinstalling
    warning: xf86-video-ati-1:7.5.0-1 is up to date -- reinstalling
    warning: xf86-video-cirrus-1.5.2-4 is up to date -- reinstalling
    warning: xf86-video-dummy-0.3.7-3 is up to date -- reinstalling
    warning: xf86-video-glint-1.2.8-5 is up to date -- reinstalling
    warning: xf86-video-i128-1.3.6-5 is up to date -- reinstalling
    warning: xf86-video-mach64-6.9.4-4 is up to date -- reinstalling
    warning: xf86-video-mga-1.6.3-3 is up to date -- reinstalling
    warning: xf86-video-modesetting-0.9.0-2 is up to date -- reinstalling
    warning: xf86-video-neomagic-1.2.8-3 is up to date -- reinstalling
    warning: xf86-video-nouveau-1.0.11-2 is up to date -- reinstalling
    warning: xf86-video-nv-2.1.20-5 is up to date -- reinstalling
    warning: xf86-video-openchrome-0.3.3-4 is up to date -- reinstalling
    warning: xf86-video-r128-6.9.2-3 is up to date -- reinstalling
    warning: xf86-video-savage-2.3.7-3 is up to date -- reinstalling
    warning: xf86-video-siliconmotion-1.7.7-5 is up to date -- reinstalling
    warning: xf86-video-sis-0.10.7-6 is up to date -- reinstalling
    warning: xf86-video-tdfx-1.4.5-5 is up to date -- reinstalling
    warning: xf86-video-trident-1.3.6-6 is up to date -- reinstalling
    warning: xf86-video-vmware-13.0.2-2 is up to date -- reinstalling
    warning: xf86-video-voodoo-1.2.5-5 is up to date -- reinstalling
    warning: xorg-bdftopcf-1.0.5-1 is up to date -- reinstalling
    warning: xorg-docs-1.7-2 is up to date -- reinstalling
    warning: xorg-font-util-1.3.0-2 is up to date -- reinstalling
    warning: xorg-fonts-100dpi-1.0.3-2 is up to date -- reinstalling
    warning: xorg-fonts-75dpi-1.0.3-2 is up to date -- reinstalling
    warning: xorg-fonts-encodings-1.0.4-4 is up to date -- reinstalling
    warning: xorg-iceauth-1.0.6-1 is up to date -- reinstalling
    warning: xorg-luit-1.1.1-2 is up to date -- reinstalling
    warning: xorg-mkfontdir-1.0.7-2 is up to date -- reinstalling
    warning: xorg-mkfontscale-1.1.1-1 is up to date -- reinstalling
    warning: xorg-server-1.16.3-2 is up to date -- reinstalling
    warning: xorg-sessreg-1.0.8-2 is up to date -- reinstalling
    warning: xorg-setxkbmap-1.3.0-2 is up to date -- reinstalling
    warning: xorg-smproxy-1.0.5-2 is up to date -- reinstalling
    warning: xorg-x11perf-1.5.4-2 is up to date -- reinstalling
    warning: xorg-xauth-1.0.9-1 is up to date -- reinstalling
    warning: xorg-xbacklight-1.2.1-1 is up to date -- reinstalling
    warning: xorg-xcmsdb-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xcursorgen-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xdpyinfo-1.3.1-1 is up to date -- reinstalling
    warning: xorg-xdriinfo-1.0.4-4 is up to date -- reinstalling
    warning: xorg-xev-1.2.1-2 is up to date -- reinstalling
    warning: xorg-xgamma-1.0.5-2 is up to date -- reinstalling
    warning: xorg-xhost-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xinput-1.6.1-1 is up to date -- reinstalling
    warning: xorg-xkbcomp-1.3.0-1 is up to date -- reinstalling
    warning: xorg-xkbevd-1.1.3-2 is up to date -- reinstalling
    warning: xorg-xkbutils-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xkill-1.0.4-1 is up to date -- reinstalling
    warning: xorg-xlsatoms-1.1.1-2 is up to date -- reinstalling
    warning: xorg-xlsclients-1.1.3-1 is up to date -- reinstalling
    warning: xorg-xmodmap-1.0.8-1 is up to date -- reinstalling
    warning: xorg-xpr-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xprop-1.2.2-1 is up to date -- reinstalling
    warning: xorg-xrandr-1.4.3-1 is up to date -- reinstalling
    warning: xorg-xrdb-1.1.0-1 is up to date -- reinstalling
    warning: xorg-xrefresh-1.0.5-1 is up to date -- reinstalling
    warning: xorg-xset-1.2.3-1 is up to date -- reinstalling
    warning: xorg-xsetroot-1.1.1-2 is up to date -- reinstalling
    warning: xorg-xvinfo-1.1.2-2 is up to date -- reinstalling
    warning: xorg-xwd-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xwininfo-1.1.3-1 is up to date -- reinstalling
    warning: xorg-xwud-1.0.4-2 is up to date -- reinstalling
    resolving dependencies...
    looking for conflicting packages...
    Packages (79) xf86-input-acecad-1.5.0-3 xf86-input-aiptek-1.4.1-3 xf86-input-evdev-2.7.3-1 xf86-input-joystick-1.6.1-1 xf86-input-keyboard-1.6.2-1
    xf86-input-mouse-1.8.1-1 xf86-input-synaptics-1.6.2-1 xf86-input-vmmouse-12.9.0-1 xf86-input-void-1.4.0-3 xf86-video-apm-1.2.5-1
    xf86-video-ark-0.7.5-5 xf86-video-ast-0.97.0-5 xf86-video-ati-1:7.5.0-1 xf86-video-cirrus-1.5.2-4 xf86-video-dummy-0.3.7-3 xf86-video-fbdev-0.4.3-1
    xf86-video-glint-1.2.8-5 xf86-video-i128-1.3.6-5 xf86-video-intel-2.20.2-2 xf86-video-mach64-6.9.4-4 xf86-video-mga-1.6.3-3
    xf86-video-modesetting-0.9.0-2 xf86-video-neomagic-1.2.8-3 xf86-video-nouveau-1.0.11-2 xf86-video-nv-2.1.20-5 xf86-video-openchrome-0.3.3-4
    xf86-video-r128-6.9.2-3 xf86-video-savage-2.3.7-3 xf86-video-siliconmotion-1.7.7-5 xf86-video-sis-0.10.7-6 xf86-video-tdfx-1.4.5-5
    xf86-video-trident-1.3.6-6 xf86-video-v4l-0.2.0-10 xf86-video-vesa-2.3.2-1 xf86-video-vmware-13.0.2-2 xf86-video-voodoo-1.2.5-5
    xorg-bdftopcf-1.0.5-1 xorg-docs-1.7-2 xorg-font-util-1.3.0-2 xorg-fonts-100dpi-1.0.3-2 xorg-fonts-75dpi-1.0.3-2 xorg-fonts-encodings-1.0.4-4
    xorg-iceauth-1.0.6-1 xorg-luit-1.1.1-2 xorg-mkfontdir-1.0.7-2 xorg-mkfontscale-1.1.1-1 xorg-server-1.16.3-2 xorg-sessreg-1.0.8-2
    xorg-setxkbmap-1.3.0-2 xorg-smproxy-1.0.5-2 xorg-x11perf-1.5.4-2 xorg-xauth-1.0.9-1 xorg-xbacklight-1.2.1-1 xorg-xcmsdb-1.0.4-2
    xorg-xcursorgen-1.0.6-1 xorg-xdpyinfo-1.3.1-1 xorg-xdriinfo-1.0.4-4 xorg-xev-1.2.1-2 xorg-xgamma-1.0.5-2 xorg-xhost-1.0.6-1 xorg-xinput-1.6.1-1
    xorg-xkbcomp-1.3.0-1 xorg-xkbevd-1.1.3-2 xorg-xkbutils-1.0.4-2 xorg-xkill-1.0.4-1 xorg-xlsatoms-1.1.1-2 xorg-xlsclients-1.1.3-1
    xorg-xmodmap-1.0.8-1 xorg-xpr-1.0.4-2 xorg-xprop-1.2.2-1 xorg-xrandr-1.4.3-1 xorg-xrdb-1.1.0-1 xorg-xrefresh-1.0.5-1 xorg-xset-1.2.3-1
    xorg-xsetroot-1.1.1-2 xorg-xvinfo-1.1.2-2 xorg-xwd-1.0.6-1 xorg-xwininfo-1.1.3-1 xorg-xwud-1.0.4-2
    Total Installed Size: 36.11 MiB
    Net Upgrade Size: -0.52 MiB
    :: Proceed with installation? [Y/n] Y
    (79/79) checking keys in keyring [############################################################] 100%
    (79/79) checking package integrity [############################################################] 100%
    (79/79) loading package files [############################################################] 100%
    (79/79) checking for file conflicts [############################################################] 100%
    (79/79) checking available disk space [############################################################] 100%
    ( 1/79) installing xf86-input-acecad [############################################################] 100%
    ( 2/79) installing xf86-input-aiptek [############################################################] 100%
    ( 3/79) downgrading xf86-input-evdev [############################################################] 100%
    ( 4/79) downgrading xf86-input-joystick [############################################################] 100%
    ( 5/79) downgrading xf86-input-keyboard [############################################################] 100%
    ( 6/79) downgrading xf86-input-mouse [############################################################] 100%
    ( 7/79) downgrading xf86-input-synaptics [############################################################] 100%
    ( 8/79) downgrading xf86-input-vmmouse [############################################################] 100%
    ( 9/79) downgrading xf86-input-void [############################################################] 100%
    (10/79) installing xf86-video-apm [############################################################] 100%
    (11/79) downgrading xf86-video-fbdev [############################################################] 100%
    (12/79) downgrading xf86-video-intel [############################################################] 100%
    (13/79) downgrading xf86-video-v4l [############################################################] 100%
    (14/79) downgrading xf86-video-vesa [############################################################] 100%
    (15/79) reinstalling xf86-video-ark [############################################################] 100%
    (16/79) reinstalling xf86-video-ast [############################################################] 100%
    (17/79) reinstalling xf86-video-ati [############################################################] 100%
    (18/79) reinstalling xf86-video-cirrus [############################################################] 100%
    (19/79) reinstalling xf86-video-dummy [############################################################] 100%
    (20/79) reinstalling xf86-video-glint [############################################################] 100%
    (21/79) reinstalling xf86-video-i128 [############################################################] 100%
    (22/79) reinstalling xf86-video-mach64 [############################################################] 100%
    (23/79) reinstalling xf86-video-mga [############################################################] 100%
    (24/79) reinstalling xf86-video-modesetting [############################################################] 100%
    (25/79) reinstalling xf86-video-neomagic [############################################################] 100%
    (26/79) reinstalling xf86-video-nouveau [############################################################] 100%
    (27/79) reinstalling xf86-video-nv [############################################################] 100%
    (28/79) reinstalling xf86-video-openchrome [############################################################] 100%
    (29/79) reinstalling xf86-video-r128 [############################################################] 100%
    (30/79) reinstalling xf86-video-savage [############################################################] 100%
    (31/79) reinstalling xf86-video-siliconmotion [############################################################] 100%
    (32/79) reinstalling xf86-video-sis [############################################################] 100%
    (33/79) reinstalling xf86-video-tdfx [############################################################] 100%
    (34/79) reinstalling xf86-video-trident [############################################################] 100%
    (35/79) reinstalling xf86-video-vmware [############################################################] 100%
    (36/79) reinstalling xf86-video-voodoo [############################################################] 100%
    (37/79) reinstalling xorg-bdftopcf [############################################################] 100%
    (38/79) reinstalling xorg-docs [############################################################] 100%
    (39/79) reinstalling xorg-font-util [############################################################] 100%
    (40/79) reinstalling xorg-fonts-encodings [############################################################] 100%
    (41/79) reinstalling xorg-mkfontscale [############################################################] 100%
    (42/79) reinstalling xorg-mkfontdir [############################################################] 100%
    (43/79) reinstalling xorg-fonts-100dpi [############################################################] 100%
    Updating font cache... done.
    (44/79) reinstalling xorg-fonts-75dpi [############################################################] 100%
    Updating font cache... done.
    (45/79) reinstalling xorg-iceauth [############################################################] 100%
    (46/79) reinstalling xorg-luit [############################################################] 100%
    (47/79) reinstalling xorg-setxkbmap [############################################################] 100%
    (48/79) reinstalling xorg-xkbcomp [############################################################] 100%
    (49/79) reinstalling xorg-server [############################################################] 100%
    (50/79) reinstalling xorg-sessreg [############################################################] 100%
    (51/79) reinstalling xorg-smproxy [############################################################] 100%
    (52/79) reinstalling xorg-x11perf [############################################################] 100%
    (53/79) reinstalling xorg-xauth [############################################################] 100%
    (54/79) reinstalling xorg-xbacklight [############################################################] 100%
    (55/79) reinstalling xorg-xcmsdb [############################################################] 100%
    (56/79) reinstalling xorg-xcursorgen [############################################################] 100%
    (57/79) reinstalling xorg-xdpyinfo [############################################################] 100%
    (58/79) reinstalling xorg-xdriinfo [############################################################] 100%
    (59/79) reinstalling xorg-xev [############################################################] 100%
    (60/79) reinstalling xorg-xgamma [############################################################] 100%
    (61/79) reinstalling xorg-xhost [############################################################] 100%
    (62/79) reinstalling xorg-xrandr [############################################################] 100%
    (63/79) reinstalling xorg-xinput [############################################################] 100%
    (64/79) reinstalling xorg-xkbevd [############################################################] 100%
    (65/79) reinstalling xorg-xkbutils [############################################################] 100%
    (66/79) reinstalling xorg-xkill [############################################################] 100%
    (67/79) reinstalling xorg-xlsatoms [############################################################] 100%
    (68/79) reinstalling xorg-xlsclients [############################################################] 100%
    (69/79) reinstalling xorg-xmodmap [############################################################] 100%
    (70/79) reinstalling xorg-xpr [############################################################] 100%
    (71/79) reinstalling xorg-xprop [############################################################] 100%
    (72/79) reinstalling xorg-xrdb [############################################################] 100%
    (73/79) reinstalling xorg-xrefresh [############################################################] 100%
    (74/79) reinstalling xorg-xset [############################################################] 100%
    (75/79) reinstalling xorg-xsetroot [############################################################] 100%
    (76/79) reinstalling xorg-xvinfo [############################################################] 100%
    (77/79) reinstalling xorg-xwd [############################################################] 100%
    (78/79) reinstalling xorg-xwininfo [############################################################] 100%
    (79/79) reinstalling xorg-xwud [############################################################] 100%
    - Then I use yaourt (for convenience) to install catalyst-total-hd234k, same happens with catalyst packages when I use catalyst-hd234k repository
    $ yaourt -S catalyst-total-hd234k
    ==> Downloading catalyst-total-hd234k PKGBUILD from AUR...
    x .SRCINFO
    x catalyst-total-hd234k.install
    x fglrx_gpl_symbol.patch
    x cold-fglrx-3.14-current_euid.patch
    x arch_3.13_kernel_acpi_node.patch
    x lano1106_kcl_agp_13_4.patch
    x lano1106_fglrx_intel_iommu.patch
    x foutrelis_3.10_fix_for_legacy.patch
    x gentoo_linux-3.10-proc.diff
    x arch-fglrx-3.8.patch
    x arch-fglrx-3.7.patch
    x 3.5-do_mmap.patch
    x catalyst-hook.service
    x makefile_compat.patch
    x ati_make.sh
    x hook-fglrx
    x arch-fglrx-authatieventsd_new.patch
    x catalyst.conf
    x atieventsd.service
    x atieventsd.sh
    x catalyst.sh
    x lib32-catalyst.sh
    x catalyst_build_module
    x PKGBUILD
    Comment by Vi0L0 (2014-10-09 18:40)
    let me paste form the grill:
    I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.
    Comment by doblerone (2014-12-17 19:15)
    During the last update, apparently there are some conflicts between catalyst-libgl and catalyst-total-hd234k. The suggestion is to remove catalyst-total-hd234k.
    Comment by Vi0L0 (2014-12-18 08:14)
    You are probably using libva-xvba-drivers which from yesterday depend on catalyst-libgl, i will add it to provides array after getting back home
    Comment by Vi0L0 (2014-12-18 21:50)
    13.1-29:
    - added catalyst-libgl, opencl-catalyst, lib32-catalyst-libgl and lib32-opencl-catalyst into provides array to satisfy libva-xvba-driver (and maybe other that will come in the future) deps;
    - added linux 3.18 support (i cannot test it actually, i can see it compiles fine though)
    Comment by K3pler (2015-01-05 12:43)
    Planning to replace my ultra outdated x1950pro for a less outdated hd3870 lol.
    And using this driver i probably need to downgrade xorg-server from 1.16 to 1.12 from the aur, right???
    Thanks for your work VioLO
    catalyst-total-hd234k 13.1-29 (mar jun 12 10:59:12 CST 2012)
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] ("A" to abort)
    ==> ------------------------------------
    ==> n
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> catalyst-total-hd234k dependencies:
    - linux>=3.0 (already installed)
    - linux<3.19 (already installed)
    - linux-headers (already installed)
    - xorg-server>=1.7.0 (already installed)
    - netkit-bsd-finger (already installed)
    - libxrandr (already installed)
    - libsm (already installed)
    - fontconfig (already installed)
    - libxcursor (already installed)
    - libxi (already installed)
    - gcc-libs (already installed)
    - gcc>4.0.0 (already installed)
    - make (already installed)
    - patch (already installed)
    - libxinerama (already installed)
    - mesa>=10.1.0-4 (already installed)
    - lib32-libxext (already installed)
    - lib32-libdrm (already installed)
    - lib32-libxinerama (already installed)
    - lib32-mesa>=10.1.0-4 (already installed)
    - xorg-server<1.13.0 (package found)
    ==> Edit catalyst-total-hd234k.install ? [Y/n] ("A" to abort)
    ==> ---------------------------------------------------------
    ==> n
    ==> Continue building catalyst-total-hd234k ? [Y/n]
    ==> -----------------------------------------------
    ==>
    ==> Building and installing package
    ==> Install or build missing dependencies for catalyst-total-hd234k:
    warning: downgrading package xorg-server (1.16.3-2 => 1.12.4-3)
    resolving dependencies...
    looking for conflicting packages...
    :: xorg-server and xf86-video-ark are in conflict. Remove xf86-video-ark? [y/N] Y
    :: xorg-server and xf86-video-ast are in conflict. Remove xf86-video-ast? [y/N] y
    :: xorg-server and xf86-video-ati are in conflict. Remove xf86-video-ati? [y/N] y
    :: xorg-server and xf86-video-cirrus are in conflict. Remove xf86-video-cirrus? [y/N] y
    :: xorg-server and xf86-video-dummy are in conflict. Remove xf86-video-dummy? [y/N] y
    :: xorg-server and xf86-video-glint are in conflict. Remove xf86-video-glint? [y/N] y
    :: xorg-server and xf86-video-i128 are in conflict. Remove xf86-video-i128? [y/N] y
    :: xorg-server and xf86-video-mach64 are in conflict. Remove xf86-video-mach64? [y/N] y
    :: xorg-server and xf86-video-mga are in conflict. Remove xf86-video-mga? [y/N] y
    :: xorg-server and xf86-video-modesetting are in conflict. Remove xf86-video-modesetting? [y/N] y
    :: xorg-server and xf86-video-neomagic are in conflict. Remove xf86-video-neomagic? [y/N] y
    :: xorg-server and xf86-video-nouveau are in conflict. Remove xf86-video-nouveau? [y/N] y
    :: xorg-server and xf86-video-nv are in conflict. Remove xf86-video-nv? [y/N] y
    :: xorg-server and xf86-video-openchrome are in conflict. Remove xf86-video-openchrome? [y/N] y
    :: xorg-server and xf86-video-r128 are in conflict. Remove xf86-video-r128? [y/N] y
    :: xorg-server and xf86-video-savage are in conflict. Remove xf86-video-savage? [y/N] y
    :: xorg-server and xf86-video-siliconmotion are in conflict. Remove xf86-video-siliconmotion? [y/N] y
    :: xorg-server and xf86-video-sis are in conflict. Remove xf86-video-sis? [y/N] y
    :: xorg-server and xf86-video-tdfx are in conflict. Remove xf86-video-tdfx? [y/N] y
    :: xorg-server and xf86-video-trident are in conflict. Remove xf86-video-trident? [y/N] y
    :: xorg-server and xf86-video-vmware are in conflict. Remove xf86-video-vmware? [y/N] y
    :: xorg-server and xf86-video-voodoo are in conflict. Remove xf86-video-voodoo? [y/N] y
    Packages (23) xf86-video-ark-0.7.5-5 [removal] xf86-video-ast-0.97.0-5 [removal] xf86-video-ati-1:7.5.0-1 [removal] xf86-video-cirrus-1.5.2-4 [removal]
    xf86-video-dummy-0.3.7-3 [removal] xf86-video-glint-1.2.8-5 [removal] xf86-video-i128-1.3.6-5 [removal] xf86-video-mach64-6.9.4-4 [removal]
    xf86-video-mga-1.6.3-3 [removal] xf86-video-modesetting-0.9.0-2 [removal] xf86-video-neomagic-1.2.8-3 [removal] xf86-video-nouveau-1.0.11-2 [removal]
    xf86-video-nv-2.1.20-5 [removal] xf86-video-openchrome-0.3.3-4 [removal] xf86-video-r128-6.9.2-3 [removal] xf86-video-savage-2.3.7-3 [removal]
    xf86-video-siliconmotion-1.7.7-5 [removal] xf86-video-sis-0.10.7-6 [removal] xf86-video-tdfx-1.4.5-5 [removal] xf86-video-trident-1.3.6-6 [removal]
    xf86-video-vmware-13.0.2-2 [removal] xf86-video-voodoo-1.2.5-5 [removal] xorg-server-1.12.4-3
    Total Installed Size: 3.73 MiB
    Net Upgrade Size: -3.31 MiB
    :: Proceed with installation? [Y/n] Y
    (1/1) checking keys in keyring [############################################################] 100%
    (1/1) checking package integrity [############################################################] 100%
    (1/1) loading package files [############################################################] 100%
    (1/1) checking for file conflicts [############################################################] 100%
    (23/23) checking available disk space [############################################################] 100%
    ( 1/22) removing xf86-video-voodoo [############################################################] 100%
    ( 2/22) removing xf86-video-vmware [############################################################] 100%
    ( 3/22) removing xf86-video-trident [############################################################] 100%
    ( 4/22) removing xf86-video-tdfx [############################################################] 100%
    ( 5/22) removing xf86-video-sis [############################################################] 100%
    ( 6/22) removing xf86-video-siliconmotion [############################################################] 100%
    ( 7/22) removing xf86-video-savage [############################################################] 100%
    ( 8/22) removing xf86-video-r128 [############################################################] 100%
    ( 9/22) removing xf86-video-openchrome [############################################################] 100%
    (10/22) removing xf86-video-nv [############################################################] 100%
    (11/22) removing xf86-video-nouveau [############################################################] 100%
    (12/22) removing xf86-video-neomagic [############################################################] 100%
    (13/22) removing xf86-video-modesetting [############################################################] 100%
    (14/22) removing xf86-video-mga [############################################################] 100%
    (15/22) removing xf86-video-mach64 [############################################################] 100%
    (16/22) removing xf86-video-i128 [############################################################] 100%
    (17/22) removing xf86-video-glint [############################################################] 100%
    (18/22) removing xf86-video-dummy [############################################################] 100%
    (19/22) removing xf86-video-cirrus [############################################################] 100%
    (20/22) removing xf86-video-ati [############################################################] 100%
    (21/22) removing xf86-video-ast [############################################################] 100%
    (22/22) removing xf86-video-ark [############################################################] 100%
    (1/1) downgrading xorg-server [############################################################] 100%
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> Making package: catalyst-total-hd234k 13.1-29 (mié ene 7 22:22:26 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Downloading amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 101M 100 101M 0 0 103k 0 0:16:44 0:16:44 --:--:-- 105k
    -> Found catalyst_build_module
    -> Found lib32-catalyst.sh
    -> Found catalyst.sh
    -> Found atieventsd.sh
    -> Found atieventsd.service
    -> Found catalyst.conf
    -> Found arch-fglrx-authatieventsd_new.patch
    -> Found hook-fglrx
    -> Found ati_make.sh
    -> Found makefile_compat.patch
    -> Found catalyst-hook.service
    -> Found 3.5-do_mmap.patch
    -> Found arch-fglrx-3.7.patch
    -> Found arch-fglrx-3.8.patch
    -> Found gentoo_linux-3.10-proc.diff
    -> Found foutrelis_3.10_fix_for_legacy.patch
    -> Found lano1106_fglrx_intel_iommu.patch
    -> Found lano1106_kcl_agp_13_4.patch
    -> Found arch_3.13_kernel_acpi_node.patch
    -> Found cold-fglrx-3.14-current_euid.patch
    -> Found fglrx_gpl_symbol.patch
    ==> Validating source files with md5sums...
    amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip ... Passed
    catalyst_build_module ... Passed
    lib32-catalyst.sh ... Passed
    catalyst.sh ... Passed
    atieventsd.sh ... Passed
    atieventsd.service ... Passed
    catalyst.conf ... Passed
    arch-fglrx-authatieventsd_new.patch ... Passed
    hook-fglrx ... Passed
    ati_make.sh ... Passed
    makefile_compat.patch ... Passed
    catalyst-hook.service ... Passed
    3.5-do_mmap.patch ... Passed
    arch-fglrx-3.7.patch ... Passed
    arch-fglrx-3.8.patch ... Passed
    gentoo_linux-3.10-proc.diff ... Passed
    foutrelis_3.10_fix_for_legacy.patch ... Passed
    lano1106_fglrx_intel_iommu.patch ... Passed
    lano1106_kcl_agp_13_4.patch ... Passed
    arch_3.13_kernel_acpi_node.patch ... Passed
    cold-fglrx-3.14-current_euid.patch ... Passed
    fglrx_gpl_symbol.patch ... Passed
    ==> Extracting sources...
    -> Extracting amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip with bsdtar
    ==> Starting build()...
    Creating directory archive_files
    Verifying archive integrity... All good.
    Uncompressing AMD Catalyst(TM) Proprietary Driver-8.97.100.7....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    ==> Entering fakeroot environment...
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> Starting package()...
    patching file etc/ati/authatieventsd.sh
    patching file common/lib/modules/fglrx/build_mod/2.6.x/Makefile
    Hunk #1 succeeded at 68 (offset 2 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 2136 (offset 30 lines).
    Hunk #2 succeeded at 2153 (offset 30 lines).
    Hunk #3 succeeded at 2170 (offset 30 lines).
    Hunk #4 succeeded at 2183 (offset 30 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 3710 (offset -182 lines).
    Hunk #2 succeeded at 3744 (offset -182 lines).
    Hunk #3 succeeded at 3767 (offset -182 lines).
    Hunk #4 succeeded at 3780 (offset -182 lines).
    Hunk #5 succeeded at 3826 (offset -182 lines).
    Hunk #6 succeeded at 3865 (offset -182 lines).
    Hunk #7 succeeded at 3883 (offset -182 lines).
    Hunk #8 succeeded at 3908 (offset -182 lines).
    patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
    patching file common/lib/modules/fglrx/build_mod/drmP.h
    patching file common/lib/modules/fglrx/build_mod/drm_proc.h
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 571 (offset -12 lines).
    Hunk #2 succeeded at 861 (offset -12 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    patch unexpectedly ends in middle of line
    Hunk #1 succeeded at 34 with fuzz 1.
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 97 with fuzz 2 (offset 4 lines).
    patching file common/lib/modules/fglrx/build_mod/kcl_agp.c
    patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
    Hunk #1 succeeded at 775 (offset -3 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 1756 with fuzz 2 (offset -5 lines).
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    ==> Creating package "catalyst-total-hd234k"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: catalyst-total-hd234k 13.1-29 (mié ene 7 22:44:01 CST 2015)
    ==> Continue installing catalyst-total-hd234k ? [Y/n]
    ==> [v]iew package contents [c]heck package with namcap
    ==> ---------------------------------------------------
    ==> Y
    [sudo] password for mario:
    [sudo] password for mario:
    loading packages...
    resolving dependencies...
    looking for conflicting packages...
    :: catalyst-total-hd234k and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] Y
    :: catalyst-total-hd234k and libcl are in conflict. Remove libcl? [y/N] Y
    :: catalyst-total-hd234k and lib32-mesa-libgl are in conflict (lib32-libgl). Remove lib32-mesa-libgl? [y/N] Y
    :: catalyst-total-hd234k and lib32-libcl are in conflict. Remove lib32-libcl? [y/N] Y
    Packages (5) lib32-libcl-1.1-1 [removal] lib32-mesa-libgl-10.4.1-1 [removal] libcl-1.1-4 [removal] mesa-libgl-10.4.1-1 [removal] catalyst-total-hd234k-13.1-29
    Total Installed Size: 222.80 MiB
    Net Upgrade Size: 222.68 MiB
    :: Proceed with installation? [Y/n] Y
    (1/1) checking keys in keyring [############################################################] 100%
    (1/1) checking package integrity [############################################################] 100%
    (1/1) loading package files [############################################################] 100%
    (1/1) checking for file conflicts [############################################################] 100%
    (5/5) checking available disk space [############################################################] 100%
    (1/4) removing lib32-libcl [############################################################] 100%
    (2/4) removing lib32-mesa-libgl [############################################################] 100%
    (3/4) removing libcl [############################################################] 100%
    (4/4) removing mesa-libgl [############################################################] 100%
    (1/1) installing catalyst-total-hd234k [############################################################] 100%
    Building fglrx module for 3.17.6-1-ARCH kernel ...
    Ok.
    Add nomodeset to your kernel line in /boot/grub/menu.lst , ie.:
    kernel /boot/vmlinuz-linux root=/dev/sda1 ro nomodeset
    You can use the tool 'aticonfig' to generate an xorg.conf file.
    --------------------- ^^^^^^^^^ --------------------------------
    fglrx was added into /etc/modules-load.d/catalyst.conf
    atieventsd (needs acpid pkg) on systemd:
    systemctl enable atieventsd
    systemctl start atieventsd
    For more info and troubleshooting visit:
    http://wiki.archlinux.org/index.php/ATI_Catalyst
    ATTENTION!
    To enable 'automatic re-compilation while system shutdown/reboot'
    testing feature run these commands as root:
    systemctl enable catalyst-hook
    systemctl start catalyst-hook
    More info here:
    https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
    Optional dependencies for catalyst-total-hd234k
    qt4: to run ATi Catalyst Control Center (amdcccle) [installed]
    libxxf86vm: to run ATi Catalyst Control Center (amdcccle) [installed]
    opencl-headers: headers necessary for OpenCL development
    acpid: acpi event support / atieventsd [installed]
    linux-lts-headers: to build the fglrx module for the linux-lts kernel
    ==> Checking vote status for catalyst-total-hd234k
    You have already voted for catalyst-total-hd234k
    ==> Packages no longer required by any installed package:
    libepoxy
    - Then, I re-enable catalyst-hook (and optionally atieventsd) to be able to build modules at end and start of pc
    $ sudo systemctl disable catalyst-hook
    Removed symlink /etc/systemd/system/multi-user.target.wants/catalyst-hook.service.
    $ sudo systemctl disable atieventsd
    Removed symlink /etc/systemd/system/multi-user.target.wants/atieventsd.service.
    $ sudo systemctl enable catalyst-hook
    Created symlink from /etc/systemd/system/multi-user.target.wants/catalyst-hook.service to /usr/lib/systemd/system/catalyst-hook.service.
    $ sudo systemctl enable atieventsd
    Created symlink from /etc/systemd/system/multi-user.target.wants/atieventsd.service to /usr/lib/systemd/system/atieventsd.service.
    - Afterwards, I blacklist the radeon module for it not to interfere with fglrx:
    Added "blacklist radeon" on the nano prompt below
    $ sudo nano /etc/modprobe.d/modprobe.conf
    - Then I generate the xorg.conf file, and get the output below with '# aticonfig --initial'
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "Accel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "radeon"
    BusID "PCI:1:5:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:5:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    - Finally I rebuild grub boot to do nomodeset in the kernel
    $ sudo nano /etc/default/grub && sudo grub-mkconfig -o /boot/grub/grub.cfg
    Generating grub configuration file ...
    Found background: /home/mario/Pictures/Wallpapers/974-arch-linux-1366x768-computer-wallpaper.png
    Found linux image: /boot/vmlinuz-linux
    Found initrd image: /boot/initramfs-linux.img
    Found fallback initramfs image: /boot/initramfs-linux-fallback.img
    done
    Then I reboot, only to get to a black screen after the initial dmesg outputs around 10 seconds on boot.
    $ journalctl -xe
    -- Logs begin at lun 2014-12-15 04:28:08 CST, end at mié 2015-01-07 23:07:22 CST. --
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Policy zone: Normal
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0xa4000000-0xa5ffffff] (32MB)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Aperture pointing to e820 RAM. Ignoring.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: console [tty0] enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: hpet clockevent registered
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Detected 2394.161 MHz processor
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.83 BogoMIPS (lpj=7980536)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Security Framework initialized
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... version: 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... bit width: 48
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... generic registers: 4
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4790.83 BogoMIPS)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: devtmpfs: initialized
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RTC time: 5:05:23, date: 01/08/15
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt ro

    (EDIT: The outputs are incorrect. First post has them.)
    The output of Xorg last time I booted up with fglrx:
    $ cat /var/log/Xorg.0.log.old
    [ 18.657]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 18.657] X Protocol Version 11, Revision 0
    [ 18.657] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 18.657] Current Operating System: Linux HP425-Desktop-A-PC 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
    [ 18.657] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet
    [ 18.657] Build Date: 29 December 2014 01:09:58PM
    [ 18.657]
    [ 18.657] Current version of pixman: 0.32.6
    [ 18.657] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.657] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.657] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 6 17:29:00 2015
    [ 18.657] (==) Using config file: "/etc/X11/xorg.conf"
    [ 18.657] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 18.657] (==) ServerLayout "X.org Configured"
    [ 18.657] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 18.657] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 18.657] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 18.657] (**) |-->Input Device "Mouse0"
    [ 18.657] (**) |-->Input Device "Keyboard0"
    [ 18.657] (==) Automatically adding devices
    [ 18.657] (==) Automatically enabling devices
    [ 18.657] (==) Automatically adding GPU devices
    [ 18.657] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 18.657] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 18.657] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 18.657] (WW) Disabling Mouse0
    [ 18.657] (WW) Disabling Keyboard0
    [ 18.657] (II) Loader magic: 0x818d80
    [ 18.657] (II) Module ABI versions:
    [ 18.657] X.Org ANSI C Emulation: 0.4
    [ 18.657] X.Org Video Driver: 18.0
    [ 18.657] X.Org XInput driver : 21.0
    [ 18.657] X.Org Server Extension : 8.0
    [ 18.659] (EE) systemd-logind: failed to get session: PID 407 does not belong to any known session
    [ 18.659] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 18.660] (--) PCI:*(0:1:5:0) 1002:9712:103c:1475 rev 0, Mem @ 0xc0000000/268435456, 0xd4300000/65536, 0xd4200000/1048576, I/O @ 0x00005000/256
    [ 18.660] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 18.661] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 18.661] (II) LoadModule: "glx"
    [ 18.661] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 18.662] (II) Module glx: vendor="X.Org Foundation"
    [ 18.662] compiled for 1.16.3, module version = 1.0.0
    [ 18.662] ABI class: X.Org Server Extension, version 8.0
    [ 18.662] (==) AIGLX enabled
    [ 18.662] (II) LoadModule: "fglrx"
    [ 18.662] (WW) Warning, couldn't open module fglrx
    [ 18.662] (II) UnloadModule: "fglrx"
    [ 18.662] (II) Unloading fglrx
    [ 18.663] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [ 18.663] (EE) No drivers available.
    [ 18.663] (EE)
    Fatal server error:
    [ 18.663] (EE) no screens found(EE)
    [ 18.663] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 18.663] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 18.663] (EE)
    The output itself of journalctl -xe
    $ journalctl -xe
    -- Logs begin at Mon 2014-12-15 04:28:08 CST, end at Tue 2015-01-06 17:16:16 CST. --
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 3 base 000100000000 mask FFFFC0000000 write-back
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 6 disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 7 disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning 1 areas for low memory corruption
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using GB pages for direct mapping
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2b000, 0x01b2bfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2c000, 0x01b2cfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13fe00000-0x13fffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13c000000-0x13fdfffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x100000000-0x13bffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x100000000-0x13bffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00100000-0xaf9f0fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00100000-0x001fffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00200000-0x3fffffff] page 2M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x40000000-0x7fffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x80000000-0xaf7fffff] page 2M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xaf800000-0xaf9f0fff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0xafbff000-0xafbfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xafbff000-0xafbfffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2e000, 0x01b2efff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RAMDISK: [mem 0x379a0000-0x37cc7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Early table checksum verification disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDP 0x00000000000F2A70 000014 (v00 HPQOEM)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDT 0x00000000AFBFE038 00003C (v01 HPQOEM SLIC-MPC 00000003 01000013)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACP 0x00000000AFBFD000 000074 (v01 HPQOEM 307E 00000003 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: DSDT 0x00000000AFBDE000 01B85D (v01 HPQOEM SB700 00000001 INTL 20060912)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACS 0x00000000AFB8F000 000040
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: APIC 0x00000000AFBFC000 000084 (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: MCFG 0x00000000AFBFB000 00003C (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SLIC 0x00000000AFBFA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET 0x00000000AFBDB000 000038 (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SSDT 0x00000000AFBDA000 0001B7 (v01 AMD POWERNOW 00000001 AMD 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning NUMA topology in Northbridge 24
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: No NUMA configuration found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initmem setup node 0 [mem 0x00000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NODE_DATA [mem 0x13fffa000-0x13fffdfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Zone ranges:
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal [mem 0x100000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Movable zone start for each node
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Early memory node ranges
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00001000-0x0009efff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00100000-0xaf9f0fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0xafbff000-0xafbfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Policy zone: Normal
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0x5728000000-0x5729ffffff] (32MB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Aperture beyond 4GB. Ignoring.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: console [tty0] enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet clockevent registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Detected 2393.931 MHz processor
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.35 BogoMIPS (lpj=7979770)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Security Framework initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... version: 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... bit width: 48
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... generic registers: 4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4789.35 BogoMIPS)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: devtmpfs: initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RTC time: 23:15:36, date: 01/06/15
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [APPR] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN0] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN1] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN2] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN3] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN4] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xfffdffff] ignored
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI host bridge to bus 0000:00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: Slot [1] registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: on NUMA node 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Enabled 5 GPEs in block 00 to 1F
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: setting as boot device: PCI:0000:01:05.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: bridge control possible 0000:01:05.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using ACPI for IRQ routing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xaf9f1000-0xafffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: Initializing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: domain hash size = 128
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: unlabeled traffic allowed by default
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource hpet
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI init
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0400-0x04cf] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d0-0x04d1] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d6] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0680-0x06ff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x077a] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c00-0x0c01] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c14] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c50-0x0c52] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6c] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cd0-0x0cdb] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0220-0x0227] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0260-0x0273] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0800] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0804] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x087f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cdc-0x0cdf] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b00-0x0b0f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b20-0x0b3f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0200-0x027f] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x000ec000-0x000fffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00100000-0xbfffffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:04: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI: found 5 devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0xd3200000-0xd321ffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 18 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: Hash tables configured (established 32768 bind 32768)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: reno registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: CLS mismatch (64 != 32), using 64 bytes
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: Video device with shadowed ROM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Unpacking initramfs...
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Disabling AGP.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: aperture base @ a4000000 size 65536 KB
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: using GART IOMMU.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: CPU0: patch_level=0x010000c8
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 1 assigned for vector 0x400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IBS: LVT offset 1 assigned
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: perf: AMD IBS detected (0x0000001f)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning for low memory corruption every 60 seconds
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initialise system trusted keyring
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zpool: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zbud: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: VFS: Disk quotas dquot_6.5.2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: msgmni has been set to 7394
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Key type big_key registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler noop registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler deadline registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler cfq registered (default)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: mode is 1366x768x32, linelength=5504, pages=0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: scrolling: redraw
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: switching to colour frame buffer device 170x48
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: fb0: VESA VGA frame buffer device
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: GHES: HEST is not enabled!
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet_acpi_add: no address or irqs in _CRS
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Linux agpgart interface v0.103
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: RTC can wake from S4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: cubic registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 10
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 17
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Loading compiled-in X.509 certificates
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: registered taskstats version 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Magic number: 15:578:301
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tty tty30: hash matches
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: setting system clock to 2015-01-06 23:15:37 UTC (1420586137)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Hibernation image not present or could not be loaded.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Write protecting the kernel read-only data: 8192k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: Detected active multiplexing controller, rev 1.1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type USB registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver usbfs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver hub
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SCSI subsystem initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new device driver usb
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci: OHCI PCI platform driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: QUIRK: Enable AMD PLL fix
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci: EHCI PCI platform driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: libata version 3.00 loaded.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: version 3.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host0: ahci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host1: ahci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: 4 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: 2 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: 4 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 2-5: new high-speed USB device number 2 using ehci-pci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Refined TSC clocksource calibration: 2394.005 MHz
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OCA1G, max UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: configured for UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 CA1G PQ: 0 ANSI: 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: ATAPI: hp DVDRAM GT30L, mP06, max UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: configured for UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP06 PQ: 0 ANSI: 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sda: sda1 sda2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 3-4: new full-speed USB device number 2 using ohci-pci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource tsc
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: nonblocking pool is initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Sleep Button [SLPB]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Lid Switch [LID]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input:

  • AMD catalyst

    Hi there
    I use amd catalyst propietary driver, performance is ok, but there are textures blinking using wine
    you may few examples:
    example, example, example
    I've tried catalyst-total-pxp and catalyst-test-pxp, both of them show the same result:
    Last edited by amenzhisnky (2014-01-15 19:45:09)

    shadow82 wrote:In catalyst control center tear free option is enabled?
    There's no this option there, I think that's because of hybrid graphics.
    Last edited by amenzhisnky (2014-01-16 14:09:04)

  • AMD Catalyst breaks TTY

    Hi,
    I have installed AMD Catalyst. When I boot, virtual console appears as usual (since I don't use a display manager), I am able to login, and I can run Xorg.
    But once Xorg has been launched, if I try to switch back to TTY, only a black screen appears. The console does still work though, if I type startx, Xfce starts again. There is just no text.
    I already tried this, but without success.
    GPU: AMD Radeon HD 6870
    /etc/default/grub Kernel parameters:
    GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset vga=0x0346 cryptdevice=/dev/lvm/Root:root root=/dev/mapper/root resume=/dev/mapper/swap"
    /etc/mkinitcpio.conf hooks:
    HOOKS="base udev autodetect modconf block keymap lvm2 encrypt filesystems keyboard fsck"

    hi, I suppose than like me you use xorg 1.17 and catalyst-test from AUR, if is the case here a  comment in the package page from packager and maintainer of catalyst stuff:
    Vi0L0 wrote:
    2015-03-13 21:14
    updated to 15.3-1:
    - borrowed from ubuntu.
    - brings xserver 1.17 support
    - its buggy
    I was thinking for long time about uploading this driver because I think it sucks . On xserver 1.17 xv video output doesn't work at all, as well as tty terminal, which is sad . After switching to xserver 1.16 it gets back to normal. I remember that in the past AMD did release ubuntu driver which had same bugs.
    So it sucks, steam games are working fine, maybe better, but still.
    And since this package is called catalyst-test i decided to make this update, you can switch to catalyst-total in no-time.
    I also dropped many patches and left only most neccessary, so 1) for intel iommu, 2) for agp 3) for 4.0 kernel support. You can still uncomment dropped one if you want.

  • [Solved] Catalyst + Minecraft: system freeze.

    Hi everyone,
    I bought a new graphics card: the ATI HD 7750 (7700 Series, Cape Verde) and installed catalyst-total from the [catalyst] repo, because the 3D performance with xf86-video-ati-git was incredible poor. I wasn't even able to scroll in chromium with this.
    Now with proprietary fglrx everything performs buttery smooth, except I get severe troubles running 3D games.
    The only one I'd miss very much is Minecraft, but also there I always encounter a system freeze after 5 seconds. Only S-Abf + B can help me get out of there, I cannot switch to tty1-6 to fix this issue.
    Here's my Xorg.0.log
    [ 15.054]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 15.054] X Protocol Version 11, Revision 0
    [ 15.054] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 15.054] Current Operating System: Linux hubert 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
    [ 15.054] Kernel command line: locale=de_DE.UTF-8 lang=de cryptdevice=/dev/sda2:vgroup root=/dev/mapper/vgroup-root nomodeset ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 15.054] Build Date: 27 August 2012 08:04:39AM
    [ 15.054]
    [ 15.054] Current version of pixman: 0.26.2
    [ 15.054] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 15.054] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.054] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 11:22:33 2012
    [ 15.056] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.056] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.058] (==) ServerLayout "aticonfig Layout"
    [ 15.058] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 15.058] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 15.060] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 15.060] (==) Automatically adding devices
    [ 15.060] (==) Automatically enabling devices
    [ 15.062] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.063] Entry deleted from font path.
    [ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.065] Entry deleted from font path.
    [ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.065] Entry deleted from font path.
    [ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.065] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 15.065] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.065] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 15.065] (II) Loader magic: 0x7c8b00
    [ 15.065] (II) Module ABI versions:
    [ 15.065] X.Org ANSI C Emulation: 0.4
    [ 15.065] X.Org Video Driver: 12.1
    [ 15.065] X.Org XInput driver : 16.0
    [ 15.065] X.Org Server Extension : 6.0
    [ 15.067] (--) PCI:*(0:1:0:0) 1002:683f:174b:e213 rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [ 15.067] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.067] (II) "extmod" will be loaded by default.
    [ 15.067] (II) "dbe" will be loaded by default.
    [ 15.067] (II) "glx" will be loaded by default.
    [ 15.067] (II) "record" will be loaded by default.
    [ 15.067] (II) "dri" will be loaded by default.
    [ 15.067] (II) "dri2" will be loaded by default.
    [ 15.067] (II) LoadModule: "extmod"
    [ 15.073] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.076] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.076] compiled for 1.12.4, module version = 1.0.0
    [ 15.076] Module class: X.Org Server Extension
    [ 15.076] ABI class: X.Org Server Extension, version 6.0
    [ 15.076] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.076] (II) Loading extension XFree86-VidModeExtension
    [ 15.076] (II) Loading extension XFree86-DGA
    [ 15.076] (II) Loading extension DPMS
    [ 15.076] (II) Loading extension XVideo
    [ 15.076] (II) Loading extension XVideo-MotionCompensation
    [ 15.076] (II) Loading extension X-Resource
    [ 15.076] (II) LoadModule: "dbe"
    [ 15.076] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.078] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.078] compiled for 1.12.4, module version = 1.0.0
    [ 15.078] Module class: X.Org Server Extension
    [ 15.078] ABI class: X.Org Server Extension, version 6.0
    [ 15.078] (II) Loading extension DOUBLE-BUFFER
    [ 15.078] (II) LoadModule: "glx"
    [ 15.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 15.088] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 15.088] compiled for 6.9.0, module version = 1.0.0
    [ 15.088] (II) Loading extension GLX
    [ 15.088] (II) LoadModule: "record"
    [ 15.088] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 15.090] (II) Module record: vendor="X.Org Foundation"
    [ 15.090] compiled for 1.12.4, module version = 1.13.0
    [ 15.090] Module class: X.Org Server Extension
    [ 15.090] ABI class: X.Org Server Extension, version 6.0
    [ 15.090] (II) Loading extension RECORD
    [ 15.090] (II) LoadModule: "dri"
    [ 15.090] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 15.095] (II) Module dri: vendor="X.Org Foundation"
    [ 15.095] compiled for 1.12.4, module version = 1.0.0
    [ 15.095] ABI class: X.Org Server Extension, version 6.0
    [ 15.095] (II) Loading extension XFree86-DRI
    [ 15.095] (II) LoadModule: "dri2"
    [ 15.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 15.097] (II) Module dri2: vendor="X.Org Foundation"
    [ 15.097] compiled for 1.12.4, module version = 1.2.0
    [ 15.097] ABI class: X.Org Server Extension, version 6.0
    [ 15.097] (II) Loading extension DRI2
    [ 15.097] (II) LoadModule: "fglrx"
    [ 15.101] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 15.229] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 15.229] compiled for 1.4.99.906, module version = 8.98.2
    [ 15.229] Module class: X.Org Video Driver
    [ 15.230] (II) Loading sub module "fglrxdrm"
    [ 15.230] (II) LoadModule: "fglrxdrm"
    [ 15.230] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 15.234] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 15.234] compiled for 1.4.99.906, module version = 8.98.2
    [ 15.234] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
    [ 15.234] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
    [ 15.234] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
    [ 15.234] (++) using VT number 7
    [ 15.236] (WW) Falling back to old probe method for fglrx
    [ 15.269] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 15.276] (--) Chipset Supported AMD Graphics Processor (0x683F) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 15.282] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 15.283] (II) AMD Video driver is signed
    [ 15.283] (II) fglrx(0): pEnt->device->identifier=0xb0c260
    [ 15.283] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    [ 15.284] (II) Loading sub module "vgahw"
    [ 15.284] (II) LoadModule: "vgahw"
    [ 15.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 15.286] (II) Module vgahw: vendor="X.Org Foundation"
    [ 15.286] compiled for 1.12.4, module version = 0.1.0
    [ 15.286] ABI class: X.Org Video Driver, version 12.1
    [ 15.286] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 15.286] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 15.286] (==) fglrx(0): Default visual is TrueColor
    [ 15.286] (**) fglrx(0): Option "DPMS" "true"
    [ 15.286] (==) fglrx(0): RGB weight 888
    [ 15.286] (II) fglrx(0): Using 8 bits per RGB
    [ 15.287] (==) fglrx(0): Buffer Tiling is ON
    [ 15.289] (II) Loading sub module "fglrxdrm"
    [ 15.289] (II) LoadModule: "fglrxdrm"
    [ 15.290] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 15.290] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 15.290] compiled for 1.4.99.906, module version = 8.98.2
    [ 15.293] ukiDynamicMajor: found major device number 250
    [ 15.293] ukiDynamicMajor: found major device number 250
    [ 15.293] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 15.293] ukiOpenDevice: node name is /dev/ati/card0
    [ 15.293] ukiOpenDevice: open result is 11, (OK)
    [ 15.293] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 15.293] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 15.294] (**) fglrx(0): NoAccel = NO
    [ 15.294] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 15.294] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series " (Chipset = 0x683f)
    [ 15.294] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe213)
    [ 15.294] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 15.294] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    [ 15.294] (--) fglrx(0): MMIO registers at 0xfeac0000
    [ 15.294] (--) fglrx(0): I/O port at 0x0000d000
    [ 15.294] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 15.323] (II) fglrx(0): AC Adapter is used
    [ 15.346] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 15.462] (II) Loading sub module "vbe"
    [ 15.462] (II) LoadModule: "vbe"
    [ 15.462] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 15.464] (II) Module vbe: vendor="X.Org Foundation"
    [ 15.464] compiled for 1.12.4, module version = 1.1.0
    [ 15.464] ABI class: X.Org Video Driver, version 12.1
    [ 15.467] (II) fglrx(0): VESA BIOS detected
    [ 15.467] (II) fglrx(0): VESA VBE Version 3.0
    [ 15.467] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 15.467] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 15.467] (II) fglrx(0): VESA VBE OEM Software Rev: 15.14
    [ 15.467] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 15.467] (II) fglrx(0): VESA VBE OEM Product: VERDE
    [ 15.467] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 15.475] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 15.475] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
    [ 15.475] (II) fglrx(0): PCIE card detected
    [ 15.475] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 15.475] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 15.479] (II) fglrx(0): Using adapter: 1:0.0.
    [ 15.489] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
    [ 15.496] (II) fglrx(0): Interrupt handler installed at IRQ 44.
    [ 15.496] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 15.496] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 15.496] (==) fglrx(0): Center Mode is disabled
    [ 15.496] (II) Loading sub module "fb"
    [ 15.496] (II) LoadModule: "fb"
    [ 15.496] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 15.501] (II) Module fb: vendor="X.Org Foundation"
    [ 15.501] compiled for 1.12.4, module version = 1.0.0
    [ 15.501] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 15.501] (II) Loading sub module "ddc"
    [ 15.501] (II) LoadModule: "ddc"
    [ 15.501] (II) Module "ddc" already built-in
    [ 15.652] (II) fglrx(0): Finished Initialize PPLIB!
    [ 15.658] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 15.658] (II) fglrx(0): Output DFP2 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP3 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP4 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP5 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP6 has no monitor section
    [ 15.658] (II) fglrx(0): Output CRT1 has no monitor section
    [ 15.658] (II) Loading sub module "ddc"
    [ 15.658] (II) LoadModule: "ddc"
    [ 15.658] (II) Module "ddc" already built-in
    [ 15.658] (II) fglrx(0): Connected Display0: DFP6
    [ 15.658] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 15.658] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
    [ 15.658] (II) fglrx(0): Year: 2010 Week: 16
    [ 15.658] (II) fglrx(0): EDID Version: 1.3
    [ 15.658] (II) fglrx(0): Digital Display Input
    [ 15.658] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
    [ 15.658] (II) fglrx(0): Gamma: 2.20
    [ 15.658] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    [ 15.658] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 15.659] (II) fglrx(0): First detailed timing is preferred mode
    [ 15.659] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 15.659] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 15.659] (II) fglrx(0): Supported established timings:
    [ 15.659] (II) fglrx(0): 720x400@70Hz
    [ 15.659] (II) fglrx(0): 640x480@60Hz
    [ 15.659] (II) fglrx(0): 800x600@60Hz
    [ 15.659] (II) fglrx(0): 1024x768@60Hz
    [ 15.659] (II) fglrx(0): Manufacturer's mask: 0
    [ 15.659] (II) fglrx(0): Supported standard timings:
    [ 15.659] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 15.659] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 15.659] (II) fglrx(0): Supported detailed timing:
    [ 15.659] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
    [ 15.659] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 15.659] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 15.659] (II) fglrx(0): Serial No: 98458040
    [ 15.659] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
    [ 15.659] (II) fglrx(0): Monitor name: S2202W
    [ 15.659] (II) fglrx(0): EDID (in hex):
    [ 15.659] (II) fglrx(0): 00ffffffffffff0015c3751901010101
    [ 15.659] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
    [ 15.659] (II) fglrx(0): 0f5054a1080081808140010101010101
    [ 15.659] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
    [ 15.659] (II) fglrx(0): 3600da291100001a000000ff00393834
    [ 15.659] (II) fglrx(0): 35383034300a20202020000000fd003b
    [ 15.659] (II) fglrx(0): 3d1f410c000a202020202020000000fc
    [ 15.659] (II) fglrx(0): 005332323032570a202020202020001f
    [ 15.659] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 15.660] (II) fglrx(0): EDID for output DFP1
    [ 15.660] (II) fglrx(0): EDID for output DFP2
    [ 15.660] (II) fglrx(0): EDID for output DFP3
    [ 15.660] (II) fglrx(0): EDID for output DFP4
    [ 15.660] (II) fglrx(0): EDID for output DFP5
    [ 15.660] (II) fglrx(0): EDID for output DFP6
    [ 15.660] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
    [ 15.660] (II) fglrx(0): Year: 2010 Week: 16
    [ 15.660] (II) fglrx(0): EDID Version: 1.3
    [ 15.660] (II) fglrx(0): Digital Display Input
    [ 15.660] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
    [ 15.660] (II) fglrx(0): Gamma: 2.20
    [ 15.660] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    [ 15.660] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 15.660] (II) fglrx(0): First detailed timing is preferred mode
    [ 15.660] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 15.660] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 15.660] (II) fglrx(0): Supported established timings:
    [ 15.660] (II) fglrx(0): 720x400@70Hz
    [ 15.660] (II) fglrx(0): 640x480@60Hz
    [ 15.660] (II) fglrx(0): 800x600@60Hz
    [ 15.660] (II) fglrx(0): 1024x768@60Hz
    [ 15.660] (II) fglrx(0): Manufacturer's mask: 0
    [ 15.660] (II) fglrx(0): Supported standard timings:
    [ 15.660] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 15.660] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 15.660] (II) fglrx(0): Supported detailed timing:
    [ 15.660] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
    [ 15.660] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 15.660] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 15.660] (II) fglrx(0): Serial No: 98458040
    [ 15.660] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
    [ 15.660] (II) fglrx(0): Monitor name: S2202W
    [ 15.660] (II) fglrx(0): EDID (in hex):
    [ 15.660] (II) fglrx(0): 00ffffffffffff0015c3751901010101
    [ 15.660] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
    [ 15.660] (II) fglrx(0): 0f5054a1080081808140010101010101
    [ 15.660] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
    [ 15.660] (II) fglrx(0): 3600da291100001a000000ff00393834
    [ 15.660] (II) fglrx(0): 35383034300a20202020000000fd003b
    [ 15.660] (II) fglrx(0): 3d1f410c000a202020202020000000fc
    [ 15.660] (II) fglrx(0): 005332323032570a202020202020001f
    [ 15.660] (II) fglrx(0): Printing probed modes for output DFP6
    [ 15.660] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 15.660] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 15.660] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 15.660] (II) fglrx(0): EDID for output CRT1
    [ 15.660] (II) fglrx(0): Output DFP1 disconnected
    [ 15.660] (II) fglrx(0): Output DFP2 disconnected
    [ 15.660] (II) fglrx(0): Output DFP3 disconnected
    [ 15.660] (II) fglrx(0): Output DFP4 disconnected
    [ 15.660] (II) fglrx(0): Output DFP5 disconnected
    [ 15.660] (II) fglrx(0): Output DFP6 connected
    [ 15.660] (II) fglrx(0): Output CRT1 disconnected
    [ 15.660] (II) fglrx(0): Using exact sizes for initial modes
    [ 15.660] (II) fglrx(0): Output DFP6 using initial mode 1680x1050
    [ 15.661] (II) fglrx(0): DPI set to (96, 96)
    [ 15.661] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 15.661] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
    [ 15.661] (==) fglrx(0): PseudoColor visuals disabled
    [ 15.661] (II) Loading sub module "ramdac"
    [ 15.661] (II) LoadModule: "ramdac"
    [ 15.661] (II) Module "ramdac" already built-in
    [ 15.661] (==) fglrx(0): NoDRI = NO
    [ 15.661] (==) fglrx(0): Capabilities: 0x00000000
    [ 15.661] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 15.661] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 15.661] (==) fglrx(0): UseFastTLS=0
    [ 15.661] (--) Depth 24 pixmap format is 32 bpp
    [ 15.661] (II) Loading extension ATIFGLRXDRI
    [ 15.661] (II) fglrx(0): doing swlDriScreenInit
    [ 15.661] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 15.661] ukiDynamicMajor: found major device number 250
    [ 15.661] ukiDynamicMajor: found major device number 250
    [ 15.661] ukiDynamicMajor: found major device number 250
    [ 15.661] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 15.661] ukiOpenDevice: node name is /dev/ati/card0
    [ 15.661] ukiOpenDevice: open result is 12, (OK)
    [ 15.661] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 15.661] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 15.661] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 15.661] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 15.661] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 15.661] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f509aba4000
    [ 15.661] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 15.661] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 15.661] (II) fglrx(0): swlDriScreenInit done
    [ 15.661] (II) fglrx(0): Kernel Module Version Information:
    [ 15.661] (II) fglrx(0): Name: fglrx
    [ 15.661] (II) fglrx(0): Version: 8.98.2
    [ 15.661] (II) fglrx(0): Date: Jul 27 2012
    [ 15.661] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 15.661] (II) fglrx(0): Kernel Module version matches driver.
    [ 15.661] (II) fglrx(0): Kernel Module Build Time Information:
    [ 15.661] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
    [ 15.661] (II) fglrx(0): Build-Kernel MODVERSIONS: no
    [ 15.661] (II) fglrx(0): Build-Kernel __SMP__: no
    [ 15.661] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 15.662] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 15.684] (II) fglrx(0): DRI initialization successfull
    [ 15.688] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01008000
    [ 15.698] (==) fglrx(0): Backing store disabled
    [ 15.698] (II) Loading extension FGLRXEXTENSION
    [ 15.698] (**) fglrx(0): DPMS enabled
    [ 15.698] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 15.698] (**) fglrx(0): Textured Video is enabled.
    [ 15.698] (II) LoadModule: "glesx"
    [ 15.698] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 15.750] (II) Module glesx: vendor="X.Org Foundation"
    [ 15.751] compiled for 1.4.99.906, module version = 1.0.0
    [ 15.751] (II) Loading extension GLESX
    [ 15.751] (II) fglrx(0): GLESX enableFlags = 592
    [ 15.753] (II) fglrx(0): GLESX is enabled
    [ 15.753] (II) LoadModule: "amdxmm"
    [ 15.753] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 15.758] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 15.758] compiled for 1.4.99.906, module version = 2.0.0
    [ 15.773] (II) Loading extension AMDXVOPL
    [ 15.773] (II) Loading extension AMDXVBA
    [ 15.778] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 15.784] (II) fglrx(0): Enable composite support successfully
    [ 15.784] (WW) fglrx(0): Option "VendorName" is not used
    [ 15.784] (WW) fglrx(0): Option "ModelName" is not used
    [ 15.784] (II) fglrx(0): X context handle = 0x1
    [ 15.784] (II) fglrx(0): [DRI] installation complete
    [ 15.785] (==) fglrx(0): Silken mouse enabled
    [ 15.785] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 15.786] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [ 15.909] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b9e0000 width=0xa00 height=0x1900
    [ 15.909] (--) RandR disabled
    [ 15.909] (II) Initializing built-in extension Generic Event Extension
    [ 15.909] (II) Initializing built-in extension SHAPE
    [ 15.909] (II) Initializing built-in extension MIT-SHM
    [ 15.909] (II) Initializing built-in extension XInputExtension
    [ 15.909] (II) Initializing built-in extension XTEST
    [ 15.909] (II) Initializing built-in extension BIG-REQUESTS
    [ 15.909] (II) Initializing built-in extension SYNC
    [ 15.909] (II) Initializing built-in extension XKEYBOARD
    [ 15.909] (II) Initializing built-in extension XC-MISC
    [ 15.909] (II) Initializing built-in extension SECURITY
    [ 15.909] (II) Initializing built-in extension XINERAMA
    [ 15.909] (II) Initializing built-in extension XFIXES
    [ 15.909] (II) Initializing built-in extension RENDER
    [ 15.909] (II) Initializing built-in extension RANDR
    [ 15.909] (II) Initializing built-in extension COMPOSITE
    [ 15.909] (II) Initializing built-in extension DAMAGE
    [ 15.911] ukiDynamicMajor: found major device number 250
    [ 15.911] ukiDynamicMajor: found major device number 250
    [ 15.911] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 15.911] ukiOpenDevice: node name is /dev/ati/card0
    [ 15.911] ukiOpenDevice: open result is 13, (OK)
    [ 15.911] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 15.911] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 16.449] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 16.547] (II) fglrx(0): Enable the clock gating!
    [ 16.547] (II) fglrx(0): Setting screen physical size to 444 x 277
    [ 16.715] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 16.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.715] (II) LoadModule: "evdev"
    [ 16.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.719] (II) Module evdev: vendor="X.Org Foundation"
    [ 16.719] compiled for 1.12.3.901, module version = 2.7.3
    [ 16.719] Module class: X.Org XInput Driver
    [ 16.719] ABI class: X.Org XInput driver, version 16.0
    [ 16.719] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.719] (**) Power Button: always reports core events
    [ 16.720] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 16.720] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.720] (--) evdev: Power Button: Found keys
    [ 16.720] (II) evdev: Power Button: Configuring as keyboard
    [ 16.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 16.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 16.720] (**) Option "xkb_rules" "evdev"
    [ 16.720] (**) Option "xkb_model" "evdev"
    [ 16.720] (**) Option "xkb_layout" "us"
    [ 16.772] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 16.772] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.772] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.772] (**) Power Button: always reports core events
    [ 16.772] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 16.772] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.772] (--) evdev: Power Button: Found keys
    [ 16.772] (II) evdev: Power Button: Configuring as keyboard
    [ 16.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 16.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 16.772] (**) Option "xkb_rules" "evdev"
    [ 16.772] (**) Option "xkb_model" "evdev"
    [ 16.772] (**) Option "xkb_layout" "us"
    [ 16.773] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
    [ 16.773] (II) No input driver specified, ignoring this device.
    [ 16.773] (II) This device may have been added with another device file.
    [ 16.774] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
    [ 16.774] (II) No input driver specified, ignoring this device.
    [ 16.774] (II) This device may have been added with another device file.
    [ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
    [ 16.775] (II) No input driver specified, ignoring this device.
    [ 16.775] (II) This device may have been added with another device file.
    [ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
    [ 16.775] (II) No input driver specified, ignoring this device.
    [ 16.775] (II) This device may have been added with another device file.
    [ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
    [ 16.776] (II) No input driver specified, ignoring this device.
    [ 16.776] (II) This device may have been added with another device file.
    [ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
    [ 16.776] (II) No input driver specified, ignoring this device.
    [ 16.776] (II) This device may have been added with another device file.
    [ 16.776] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0)
    [ 16.776] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.776] (II) Using input driver 'evdev' for ' USB Keyboard'
    [ 16.776] (**) USB Keyboard: always reports core events
    [ 16.776] (**) evdev: USB Keyboard: Device: "/dev/input/event0"
    [ 16.776] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
    [ 16.776] (--) evdev: USB Keyboard: Found keys
    [ 16.776] (II) evdev: USB Keyboard: Configuring as keyboard
    [ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input0/event0"
    [ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8)
    [ 16.777] (**) Option "xkb_rules" "evdev"
    [ 16.777] (**) Option "xkb_model" "evdev"
    [ 16.777] (**) Option "xkb_layout" "us"
    [ 16.777] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
    [ 16.777] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.777] (II) Using input driver 'evdev' for ' USB Keyboard'
    [ 16.777] (**) USB Keyboard: always reports core events
    [ 16.777] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
    [ 16.777] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
    [ 16.777] (--) evdev: USB Keyboard: Found keys
    [ 16.777] (II) evdev: USB Keyboard: Configuring as keyboard
    [ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input1/event1"
    [ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9)
    [ 16.777] (**) Option "xkb_rules" "evdev"
    [ 16.777] (**) Option "xkb_model" "evdev"
    [ 16.777] (**) Option "xkb_layout" "us"
    [ 16.777] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
    [ 16.777] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 16.777] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 16.777] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 16.777] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2/event2"
    [ 16.778] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
    [ 16.778] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 16.778] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 16.778] (II) No input driver specified, ignoring this device.
    [ 16.778] (II) This device may have been added with another device file.
    [ 16.778] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event20)
    [ 16.778] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 16.778] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 16.778] (**) UVC Camera (046d:09a4): always reports core events
    [ 16.778] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event20"
    [ 16.778] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 16.778] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 16.778] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input20/event20"
    [ 16.778] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 11)
    [ 16.778] (**) Option "xkb_rules" "evdev"
    [ 16.778] (**) Option "xkb_model" "evdev"
    [ 16.778] (**) Option "xkb_layout" "us"
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event10)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event12)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event13)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.780] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
    [ 16.780] (II) No input driver specified, ignoring this device.
    [ 16.780] (II) This device may have been added with another device file.
    [ 16.780] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
    [ 16.780] (II) No input driver specified, ignoring this device.
    [ 16.780] (II) This device may have been added with another device file.
    [ 16.780] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 16.780] (II) No input driver specified, ignoring this device.
    [ 16.780] (II) This device may have been added with another device file.
    [ 16.782] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 16.786] (II) fglrx(0): EDID vendor "ENC", prod id 6517
    [ 16.786] (II) fglrx(0): Using EDID range info for horizontal sync
    [ 16.786] (II) fglrx(0): Using EDID range info for vertical refresh
    [ 16.786] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 16.786] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
    [ 16.786] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 18.696] (II) fglrx(0): EDID vendor "ENC", prod id 6517
    [ 18.696] (II) fglrx(0): Using hsync ranges from config file
    [ 18.696] (II) fglrx(0): Using vrefresh ranges from config file
    [ 18.696] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 18.696] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
    [ 18.696] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 19.844] (II) fglrx(0): EDID vendor "ENC", prod id 6517
    [ 19.844] (II) fglrx(0): Using hsync ranges from config file
    [ 19.844] (II) fglrx(0): Using vrefresh ranges from config file
    [ 19.844] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 19.844] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
    [ 19.844] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    I can't see anything suspicious, hopefully someone of you knows better.
    At last my xorg.conf :
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Help and hints how to continue from here would be highly appreciated.
    EDIT: By the way, I tried lots of things from the wiki. https://wiki.archlinux.org/index.php/Catalyst.
    But there was one point I could't figure out how to implement:
    The radeonfb framebuffer drivers have been known in the past to cause problems of this nature. If your kernel has radeonfb support compiled in, you may want to try a different kernel and see if this helps.
    How can I disable radeonfb?
    EDIT2: Well, almost 2 years later the open source driver is good enough to handle Minecraft and others very easily. Closed.
    Last edited by Duxon (2014-07-10 21:31:02)

    I read the open source drivers for the Southern Island Cards have been improved, but aren't ready for 3d accelerated use yet.
    http://thread.gmane.org/gmane.comp.vide … evel/45138
    Therefore users of the 7700 series have to stick to catalyst and I still have no idea what the cause of the freeze is. Can anyone help?

  • Arch linux doesn't boot after installing AMD ATI Catalyst

    I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
    AMD Catalyst ArchWiki.
    I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
    [catalyst-stable]
    Server = http://catalyst.wirephire.com/repo/catalyst/$arch
    ## Mirrors, if the primary server does not work or is too slow:
    #Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
    #Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
    #Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
    Then I have update pacman's database and install below packages:
    catalyst-hook
    catalyst-utils-pxp
    lib32-catalyst-utils-pxp
    (No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
    After installing it, I have configured the driver, configuring X using below command:
    # aticonfig --initial
    In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
    To perform a switch into Intel's IGP I have also installed the mesa-libgl  package and Intel's drivers: xf86-video-intel  and intel-dri .
    I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
    # systemctl enable catalyst-hook
    # systemctl start catalyst-hook
    And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
    blacklist radeon
    and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
    To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
    catalyst_build_module all
    Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
    Starting temp files linker to catalyst...
    Starting Catalyst event Daemon...
    [ OK ] Started Catalyst event Daemon
    Starting Catalyst's fglrx kernel' module builder...
    [ OK ] Started temp files linker for catalyst.
    [ OK ] Started Catalyst's fglrx kernel' modue builder.
    [ OK ] Started gnome Display manager.
    [ OK ] Started Network manager.
    [ OK ] Reached target Multi-User system.
    [ OK ] Reached target Graphical Interface.
    [ OK ] Reached target Network.
    I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
    Any ideas?
    Package versions:
    Kernel version 3.17.6-1-ARCH
    catalyst-hook 14.12-1
    catalyst-utils-pxp 14.12-1
    lib32-catalyst-utils-pxp 14.12-1
    xorg-server 1.16.2.901-1
    xf86-video-intel 2.99.916-3
    Last edited by toni (2014-12-13 19:38:38)

    FInally I managed to boot arch linux.
    I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
    It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
    Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
    Finally I had to add an entry in pacman.conf:
    [xorg115]
    Server = http://catalyst.wirephire.com/repo/xorg115/$arch
    ## Mirrors, if the primary server does not work or is too slow:
    #Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
    #Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
    Then performs following actions:
    1)  # pacman -Syuu catalyst-hook catalyst-utils-pxp
    2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev,  xf86-input-synaptics, etc.
    3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
    I have put a comment here.
    Last edited by toni (2014-12-14 12:31:29)

Maybe you are looking for

  • Process order should not take part in MRP run

    Hello Colleagues I looking for a way how to exclude not released process orders (we have PP-PI) from MD04 report. Not released process order should not take part in MRP run. I was trying to do it using OPJJ for availability check 02 and checking rule

  • Oracle portal  session and pl/sql

    Hi all i use portal v.10.1.2.2.0 and i would like to play with a session variable. all i do is grant execute on wwsto_api_session to myportal from portal schema. and then i want to do l_store := portal.wwsto_api_session.load_session (p_domain, p_sub_

  • Query on results from another query

    Post Author: Duncan1980 CA Forum: Crystal Reports Is it possible to query on the results from another query.  I have a query that produces a list of document numbers.  I want to use the output from that query as the filter criteria in a another query

  • Next button only for quiz review

    I searched, with no luck, for a way to only have the "next" button visible on quiz reviews.  I would like it hidden during the quiz, becuase I don't want back or skipping possible.  Also, hiding the playbar in the skin.  Thanks, Brian

  • Best settings for Airport extreme

    I have grande internet service - fiber optic to the house. What are the best settings for my AEBS? When I connect directly - bypassing the AEBS - I get much much faster internet service. What are the best settings? Thanks