ES1946 (Solo) Audio controller not recognized

Dear all,
ES1946 (Solo) Audio controller is not recognized on my box. I examined dmesg, it said:
es1938: OPL3 not detected at 0x1090
I've listed my dmesg and rc.conf below. Could anyone kindly look into it, and give me a hint to solve this problem?
Best regards,
Wen
dmesg
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
Entering add_active_range(0, 0, 49136) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 49136
HighMem 49136 -> 49136
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 49136
On node 0 totalpages: 49136
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 352 pages used for memmap
Normal zone: 44688 pages, LIFO batch:7
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6B60, 0014 (r0 PTLTD )
ACPI: RSDT 0BFFD520, 002C (r1 PTLTD RSDT 0 LTP 0)
ACPI: FACP 0BFFFB65, 0074 (r1 IBM TP240 2 PTL F4240)
ACPI: DSDT 0BFFD54C, 2619 (r1 PTL BX-TJ 0 MSFT 100000B)
ACPI: FACS 0BFFFFC0, 0040
ACPI: BOOT 0BFFFBD9, 0027 (r1 PTLTD $SBFTBL$ 0 LTP 1)
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48752
Kernel command line: root=/dev/sda8 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0118d000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 365.025 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189624k/196544k available (2120k kernel code, 6384k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 731.57 BogoMIPS (lpj=1218523)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0a20)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (731.57 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9e5, last bus=0
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 2180-218f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: can't evaluate _PRS: 12321<6>pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
system 00:05: iomem range 0xe0000-0xfffff could not be reserved
system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x8000-0x803f has been reserved
system 00:06: ioport range 0x2180-0x218f has been reserved
system 00:06: ioport range 0x398-0x399 has been reserved
PCI: Bus 1, cardbus bridge: 0000:00:0a.0
IO window: 0x00001800-0x000018ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x10000000-0x13ffffff
MEM window: 0x14000000-0x17ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 540k freed
Simple Boot Flag at 0x40 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 371
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:09.0: Boot video device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:08: activated
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
No dock devices found.
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1040 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1048 irq 15
ata1.00: ATA-5: HITACHI_DK23CA-10, 00H5A0G1, max UDMA/100
ata1.00: 19640880 sectors, multi 16: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-1 00H5 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
es1938: OPL3 not detected at 0x1090
gameport: ES1938 is pci0000:00:0b.0/gameport0, io 0x10a0, speed 1084kHz
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SBTN]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FAN] to D3
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (64 C)
Marking TSC unstable due to: TSC halts in idle.
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /class/input/input5
Yenta: CardBus bridge found at 0000:00:0a.0 [1014:019a]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x64
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000010
pccard: PCMCIA card inserted into slot 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PPP generic driver version 2.4.2
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
input: ImPS/2 Generic Wheel Mouse as /class/input/input6
NET: Registered protocol family 23
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001060
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
lp: driver loaded but no devices found
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:26:5c:d8:21
nsc-ircc 00:09: can't evaluate _CRS: 12321
nsc-ircc 00:09: activation failed
nsc-ircc: probe of 00:09 failed with error -5
nsc-ircc, Found chip at base=0x398
nsc-ircc, Wrong chip version ff
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
Clocksource tsc unstable (delta = -77266143 ns)
Adding 200772k swap on /dev/sda7. Priority:-1 extents:1 across:200772k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
tun0: Disabled Privacy Extensions
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access USB DISK 28X PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="yes"
TIMEZONE="Asia/Saigon"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(8390 pcnet_cs slhc pcnet_cs snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-hwdep snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-opl3-lib snd-es1938 soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="fang.ntu.edu.vn"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)

hi!
did you read this?
http://tascam.com/i-414-232-128-0-4A15AD91.pdf
can be found here: http://tascam.com/products/fireone;9,14,104,19.html
regards,
m.

Similar Messages

Audio CD not recognized with Mini but reads with Macbook?

Error message saying Audio CD not recognized with Mini but reads with Macbook pro. Both machines are using the same Samsung external usb dvd/cd player.
I've tried rebooting the mini, cleaning the disk, unplugging the drive and the Mini still won't recognize the CD's (it's a 3 cd set and all 3 disks aren't working on the Mini.
When I use the same disks and drive with my Macbook Pro everything works fine.
Any suggestions?

Hi Jay,
Certainly a strange one!?
Are these commercial or self made Discs?
Have you tried CD/DVD sharing on the MBP & see if the Mini can read them in the MBP?

USB Host Controller not recognized by Windows 7.

Just installed Windows 7 in a1130n desktop. The USB Host Controller and the Std USB Host Controller are not recognized by the operating system. The USB ports and the media memory ports on the front panel will not work.

My HP Z400 is suffering from the same problem. Did you discover a solution?

USB Audio Device Not Recognized by Stream 7 tablet

Half the reason I bought the Stream 7 was to use it has a music player with my iBaso D2 USB Audio DAC Headdphone Amp.
The device is recognnized by my Win 8.1 desktop and every other computer I've plugged it into. Why it is not recognized as an audio playback device is beyond me. I've tried all of the suggestions that I've been able to find on the net without any luck. Is therte some reason why this function has been disabled on the Strwea 7?
This question was solved.
View Solution.

Problem Solved!
It turned out to be a combination of the usb cable and the OTG USB hub. On my desktop the iBaso was cable specific as to the device being recognized. When I tried the working cable witht the OTG hub on the Stream 7 it failed as usual. But when I tried the cheap monoprice adapter it worked.
The usb audio solves the horrible sound problem with the Stream 7 for anybody who is lookiing for a Fix.
The OTG hub works with a mouse and a mSata drive perfectly but not with the iBAso DAC.
Thanks to everyone who replied for keeping me trying.

Hp pavilion a1250n says multimedia audio controller not installed, sound not working (windows7)

No sound plays with my logitech ls11 speakers. my computer is a hp pavilion a1250n, running windows 7, 32 bit operating system, and a AMD ahtlon(tm)64 x2 dual core processor 3800+ 2.00 GHz
When i click the speaker icon in the lower right corner, and open the playback devices, it says:
Speaker: anvsoft virtual sound device, default device.
When i ran a troubleshooter, to see if there were any files I should install, i got an error message:
multimedia audio controller couldnt not be installed, driver not found.
In device manager, below the sound video and game controlers tab, it says Anvsoft virtual sound device.
Bellow the other devices tab, it says multimedia audio controler, but there is a yellow triangle exclamation makr over it.
How can I get sound on my computer? Are there any free programs that are compatible that will allow me to have sound?
Thanks to anyone who takes the time to read this.

Hi:
Click on the link below. Accept the agreeement. Download, unzip and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

Saitek P990 Game Controller not recognized by Toshiba L505D Laptop

Window 7 recognized the Saitek P990 Dual Analog Game Controller no PROBLEM, able to go into Properties Pad Test mode and move thumb doggles in Test Mode with no problem.
I believe it is The TOSHIBA USB Host Port Controller on my Satellite L505D- S9695 laptop not recognizing the devices. NOThing on Toshiba Download Categories for USB DEVICE DRIVERS ????? What Up with that ???

USB drivers are included in WIndows and in the basic motherboard chipset driver package.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

External audio source not recognized

Hey, just got a mac mini with intel package yesterday at my local Apple dealer. Included keyboard, mouse, monitor and speakers. Everything appears to be working beautifully, except the mini is not recognizing the speakers. All the cords are in the right place, the volume is up, power is on, but it is only using the internal speakers. Does not even list the speakers in the sound utility. Any ideas as to what the problem is? The speakers? The cables? Or the output jack in the mini? Any assistance would be greatly appreciated.
Mac mini intel core duo Mac OS X (10.4.6) 1.66 GHz, 80 GB HD

With the package we purchased, got a set of Elecom speakers, worth about $50. Not familiar with the name, so brought them in hoping they could hook them up to a demo Mac mini to test them. Turned out to be a bad cable. Got a new set and was sure I plugged them into the right jack (the one with the headphone symbol above it), turned them on and all was good. Just a cheap pair of speakers was all. Sorry, dunno if this was helpful. Maybe it's your speakers? Rather than the mini's audio jack.
Mac mini intel core duo Mac OS X (10.4.6) 1.66 GHz, 80 GB HD

Scsi controller not recognized during ftp install

Hi all,
As you can tell, this is my first post and my first attemp to install arch. I downloaded the latest ftp install floppies "Arch Linux 0.5 (Nova)" and I am trying to install arch on a PII system with and Adaptec 2940UW controller and no cdrom. I can boot from Tom's recue disk:
http://www.toms.net/rb/
and the controller is recognized and I can use fdisk to partition the drive.
However, when I boot from the arch install floppies, the controller is not recognized. When I manually load the module for the controller, ie. aic7xxx, lsmod shows it as unused.
After looking at the boot log using dmesg, I noticed the following, which I don't understand:
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2
Is this a kernel issue and does anyone have any pointers for me?
Thanks
Kevin
PS: I tried my best to search for a related topic.

Thanks for the reply. It still doesn't work for me.
I noticed that the floppy images have been updated -- the md5sum's have changed. I will give them a try.
As an aside, the listed md5sum's for the new images don't match the downloads. I downloaded from several mirrors and I get the same sums, which don't match the sums listed.
$ md5sum *.img
99683b5a119e6332cd8f2185a24083cf boot.img
d2501030749fa2629582de1f02846056 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
$ cat md5sums
2d172ab879f1487f0a381cf432173c26 boot.img
ce6408f0e4051656ddf9c2df3356f1f8 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
Thanks
Kevin

Audio jack not recognizing head phones

Just bought a new satellite, model C55-B5200. Long story short, the audio jack is not recognizing when headphones are plugged into it.
I have checked to make sure the speakers are enabled; they work fine. I uninstalled and reinstalled the realtek driver from the toshiba model page (2014-04-07 | Version: 6.0.1.7195 ) and am at a loss as where to go next.
Any suggestions are appreciated!

When you run the Windows Sound applet (enter 'sound' from the Start screen and select 'Settings') does the 'Playback' tab show any indication of headphones?
If you can select a Headphones device from the Playback tab, click the Properties button and check to make sure 'Device usage' is set to 'Use this device (enable)'.
Jim

Booting from a SATA controller not recognized by BIOS.

I have an USB install of Arch Linux and it works pretty well for me, I can access the files on the SATA drive, browse the intarwebs and code, but I can't really paint on it and that forces me to have a Windows installation on the hard drive.
But the problem is that the BIOS doesn't see the disk and since it isn't a Linux kernel I can't refer to it through UID and I'm not entirely sure GRUB can see non-BIOS disks either, which doing ls from GRUB commandline seems to confirm, as it only lists the USB stick and it's partitions. Is there any GRUB 2 module or other way to have it recognize the disk plugged into the controller, so I can chainload into Windows?
The Windows bootloader seems to be capable of booting from a disk not recognized by BIOS so as long as I chainload into it I guess it'll be all right.
I heard there is some way to stuff the Windows bootloader onto a pendrive or even force the controller BIOS into motherboard BIOS, but I'd rather avoid this and stick with GRUB if possible.
If it's any help here's what the lspci has to say about the controller:
01:08.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at a000 [size=16]
I/O ports at a400 [size=16]
I/O ports at a800 [size=16]
I/O ports at ac00 [size=16]
I/O ports at b000 [size=32]
I/O ports at b400 [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: [e0] Power Management version 2
Kernel driver in use: sata_via
Kernel modules: sata_via
Thanks in advance.

No it doesn't and the mobo doesn't have such a setting.
In the end I searched for the controller BIOS on the intarwebs and ended up modyfing the motherboard BIOS to include it with cbrom, though I had to sacrifice the netboot module for it to fit; I didn't use anyway, so no big loss. By chance I didn't screw up anything during flashing and now there is a controller RAID prompt after the usual BIOS screen and I can boot from"SCSI" which is the SATA disk. I can now install Windows no problem and GRUB2 recognizes the disk on it's own too.
But I don't really like this modyfing BIOS stuff, is there seriously no way to do it, save maybe writing my own GRUB2 module by gleaning the code of sata_via kernel module?
Also at some point I think I made ntldr see the disk with unmodified mobo BIOS, but I don't remeber how exactly I did it and anyway the USB with bootloader became 0-th drive, so the Windows of course wouldn't boot (why doesn't it have drivemap, duh). It would be best if I somehow made GRUB2 see this disk with unmodified BIOS and then drivemap and fire the ntldr, but if that can't be done, then oh well.

Multiedia audio controller not working HELP!!!!!!!!

upgraded to win 2000 lost drivers to my multimedia audio controller (no drivers) I believe the model number is sc0209 but how do I get the right drivers to make my sound work again? New at this but
trying to find drivers to get my sound working.

Pugdad,
The model number for the sound card is located on the PCB circuit board itself. It should be printed something like CT**** or SB****.
Jason

Multimedia Audio Controller not working..... have installed updates and still not workin

Can someone help me with my multimedia audio controller? I've initially installed the updates from the support page and after reboot the Xi-Fi driver is listed. After installed the console update programme for Xi-Fi extreme music the driver is gone and I get a "Multimedia Audio Controller" instead with a error message.
No matter how many times i try reinstalling and uninstalling it doesn't work.

Hi:
Click on the link below. Accept the agreeement. Download, unzip and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

USB Midi Controller not recognized by Mac?

hey there
I have just attempted to plug in my trusty Edirol PCR300 to my mac for the first time. It currently works on my PC
I installed the 2.0.0 driver as per instructions on Edirol website, rebooted, plugged in and turned on the device.
The device is recognized in the system profiler (about this mac etc etc Hardware > USB) however it is nowhere to be found on the midi page of the Audio Midi Utility. One would expect it to turn up here when i press Rescan Midi.... and needless to see it's not turning up in Logic and nor is it an input option on the PCR Editor software.
Obviously i've tried turning it off and back on etc etc.
Running the latest Lion, latest Logic and latest Edirol driver on a Macbook Pro i7 with 8GB RAM.
Any help would be appreciated, i've been trying to get this working for 4 hours now!

Hi Guys
I have a PCR connected up here, running OSX.7.3, it works fine:
It does need drivers, as discussed in my earlier post.
The OP's issue is probably down to incorrect driver installation, or possible some conflict with other MIDI drivers. If the OP has not solved the problem, I suggest using the Edirol driver removal software, and then re-installing the drivers.
(Always assuming that the keyboard does work OK on another computer, and that the cable is OK).
CCT

Conexant smart audio 221, not recognized most of the time

My laptop is a HP Pavilion dv2810us Entertainment Notebook
It all started when I changed my OS from vista to windows 7. Ever since I have been having the "no audio output device installed" problem most of the time. When I go to device manager there is no hint of a sound device, it is as if the laptop can’t recognize/access my sound device.
Sometimes though, when I turn my laptop on, the sound is working perfectly and my device manager shows Conexant smart audio 221 installed. When the laptop has sound working and it goes to sleep, sometimes when it awakes it changes to no audio output device installed. When I try to install the audio driver it says it can’t find the media device. Today I did a OS generalizing procedure to return to default drivers supposedly but it didn’t help. Any comments, clues, suggestions will be VERY MUCH appreciated. I really wanna know why in the world isnt my sound device recognized... :[

I have the same problem, sometimes get audio drivers perfectly and sometimes the device manager just does not show it. I tried the SP39679.exe, run as an administrator, and got the message "unable to locate the device"!
I also tried SP40270.exe, successful installation and seems to work fine, but when I restart the computer, sometimes the audio device just disappear again. I tried to install manually, but the problem persists!

Blank Audio CD not recognized as Audio only as Data CD

Have recorded many audio CD's using iTones. All of the sudden when I put a new blank audio CD in it mounts as untitled CD or data CD. Have tried 5 new blank audio CD's. iTones will not let me burn it. Have a Sony Music CD recorder and put the blank CD in and it shows recordable. This started with 10.5.7 just within the last week so I installed 10.5.8. Same results. Also inserted a recorded Audio CD and it mounts correctly. Any suggestions.
Thanks,
Hal B

skottish wrote:Sorry tuddy, I was really tired when I responded to your post and missed some (most?) of the details. Ripping apps should find the discs without any extra software. Put an audio CD in the tray, wait a seconds, and run 'dmesg | tail' from a terminal and see what kind of output you get.
Don't sweat it, skottish. I didn't think of looking at the kernel message until you mentioned it. Something definetely doesn't look right here. I also failed to mention some other information. I have a cd-writer and dvd-writer on the same IDE channel and if I put an audio cd into the old cd-writer then asunder can see that drive and it works. Problem is that it's old and slow. I know the DVD drive works, I just verified it under another operating system that shall remain nameless. Please advise.
#before audio cd is inserted
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
eth0: no IPv6 routers present
#after audio cd is inserted
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
end_request: I/O error, dev sr1, sector 0
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
end_request: I/O error, dev sr1, sector 0
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
end_request: I/O error, dev sr1, sector 0

ES1946 (Solo) Audio controller not recognized

Similar Messages

Maybe you are looking for