ESA C670 feature specific questions

Does ESA 670 support the following:
intrusion detection signatures, file signatures
what is the max capacity of quarantine storage in GB?
What is the max number of domains it can handle (10000)?
What is the max number of emails that can be sent per day?
TIA for the help.

Hi Salman,
Please contact the PH team. they should be able to assist you with this.
www.cisco.com/go/ph
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html

Similar Messages

Specific Questions Multiple Routers *HELP*

I have a few specific questions regarding multiple routers in one home.
1. Would it be possible to have (2) verizon supplied routers such as Actiontecs working in one home over Coax? to be more specific i would like one router in one room of the house connected to coax and providing hardwired/wireless. and another of the same type in a different room doing the same.
an installer told me something to the effect that there would be wireless interference between the two. my next question is if I am able to have two routers connected over coax. could I log in to one and Set Wireless to OFF? thus eliminating wireless interference? if not what would be the issue? could i use a non-verizon supplied router (which i understand there is no support for) ? could i use a Wired router?
there is no wireless coverage issue here. simply personal preference. i need the ability to hardwire systems without running cable around the house ie:cat5 from router to another room.no wireless bridges or other configurations.
these routers are excellent in features and performance and having a second would be nice.
my last resort option would be to connect the router to my GE smartconnection center that i have in my home. coax to router router to cat5e thus braodcast throughout the house depending where i choose. this is my last resort since it is a steel enclosure and would hinder wireless performance.

Check out this website. It has all the different network configurations, along with the pro's and con's of each set up.
http://www.dslreports.com/faq/verizonfios/3.0_Networking
You can also set up the wireless to adhoc mode, which will allow you to connect the second router to the first wirelessly and extend your network without running cable to the other end of the house.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

Can you link specific questions to list variables where it pops up choices depending on the question?

If i am asking a specific question for example:
Alpha Sector, then if Alpha Sector was selected then you must list what POSITION on ALPHA work is being performed.
Alpha = Alpha Position 1
            Alpha Position 2
            Alpha Position 3
            Alpha Position 4
            Alpha Position 5 , then depending on which of these are selected, it also has another question as well. What will be the FREQUENCY on that SPECIFIC POSITION.
Say that Alpha was SELECTED, then work is being performed on ALPHA Position 1, then another popup here should allow another question to be answered: What is the FREQUENCY for ALPHA Position 1 ? then once this was asked if Alpha Position 2 was also SELECTED, then go through the same above ROUTINE.
Alpha = Alpha Position 2 was also selected, then another popup here should allow another question to be answered: What is the FREQUENCY for ALPHA Position 2 ? and SO ON.
How is this accomplished? Would i have to create new pages then link to them or what?
Please help, feel free to call or email me direct.
Thank you,
[email protected]
314-421-9134
Robert

Thanks for your suggestions, Magnus, you really have had a good think for me - I appreciate that!
What I am doing is report writing in which 90% of the report is the same for everyone. Except the cover page with Name and Address details, and Report title; the initial section which is the same for everyone except for specifics such as amount to invest, reason for investment, term to invest over, things like that.
The end of the report is the recommendations section which is where I use freetext to create a bespoke solution - this cannot be automated.
Just automating the cover page and the intro section save me huge amounts of time which I can then use on research and fund analysis, leaving the principles of investment section pretty much the same for everyone, as here I'm describing the principle and theory.
After I created this Report Template my average report creation time went down from about 3 to 4 hours, to about 45 minutes. I guess the automation itself doesn't save as much time as the templating does, but it allows me to concentrate on the important bit and not worry if I have left something out - or in - that changes the overall thrust of the report.
I cannot load Lotus WorpPro on Parallels, nor on Virtual PC, so the lack of automation really is a pain here. I see it as a weakness of Apple products for business, as I am sure Microsoft do which is why they have dropped VBA support for Office 2008.
I have got NeoOffice as well as OpenOffice for Mac on my system, but really they aren't atable enough to use, and the formatting is pretty flaky. It certainly isn't completely consistent with Office itself.
So, I am left with the conclusion that progress only means a reduction in features!
But maybe I'm missing something?
Mac

Specific question on seek

Ok here is a specific question unlike my previous one.
If i store records with a fixed record length something like :
RandomAccessFile file = new RandomAccessFile("example.txt","rw");
long pos = inputLong("Type the record number for saving the data:");I am using the "pos" to give my record a location. Thus searching for a record i would use something like
file.seek(50*pos);My question is, here to locate a record i must know its pos number before hand, is it possible to locate a record with letters instead of a number?

I believe by pos he means "index" or "recordnumber" (i.e. each "record" is 50 bytes long, fixed-width and pos is really which of these records/items he wishes to retrieve).
As far as locating them with letters, that depends. If you simply wish to find a record that contains specific letters, then you will have to read each record and then check if it contains those letters. If, on the other hand, each record has a "key" (i.e. the first two letters of each record must be unique) then you can read through the entire file when you initially access it and create a hashmap containing these keys and there "position" or "index". Then, when the user says give me AZ, you simply retrieve the "index" from the hashmap and read the corresponding record.
Edit: That example I gave you in your ":( Help" thread does exactly this second option.

Very specific question about iOS 7 and podcasts

I have a very specific question regarding the playback of podasts under iOS 7.
Right now, I've still got iOS 5.1.1 (iPhone 4S).
What I would like to have is a way to play an episode from a podcast that I have not yet finished, and when I double-click the ear-bud's middle button, then I would like to jump (skip) to the episode in the list, even if that episode is from a different podcast.
Right now, under iOS 5.1.1, I achieved that by creating a smart playlist in iTunes that collects all the episodes from all podcasts with a play count == 0.
This smart playlist is mirrored to the iPhone.
It works very well.
It seems to me that something like that is not possible under iOS 6, so I skipped that.
My question now is whether I can acheive this under iOS 7.
I would be most grateful if some kind soul could shed some light on that for me.
Best,
Gabriel.

Hi Larry,
Thanks very much for posting a reply.
I do absolutely intend to print a test copy first - but thanks to your advice at least know the spine is going to be ok!
I didn't realize that method would give me a nice landscape image of the unbound cover - I'd mistakenly remembered that it gave only one page at a time for front and back.
Thanks for helping out.
Best,
Marco

Application specific questions

Hello.
In what transaction can I process application-specific questions of Support Message?

Hi
You can give the reply using the action
SLFN0001_ADVANCED_COMP_QUEST Answers to appl-spec. questions
within the same ticket or support message from the action button in the change mode
are you referring to same.
Regards
Prakhar

PSC 500 won't print yellow (a few specific questions)

I have tried installing a brand new cartridge, cleaning the connections, etc. The most common suggestion I've found is that I have two bad or "old" cartridges (manufactured in Puerto Rico, April 2007). Before I go buy another costly cartridge, I have a few questions:
1) I colored an entire sheet of paper yellow in Word, then printed it. The printer just spat it out without even pretending to print anything on it. Does this in itself suggest either a printer or cartridge problem?
2) I recently installed a new black cartridge (a remanufactured or refilled one from simplyink.com--yes, I know that's not recommended), and I'm sure I haven't tried to print anything in color since then (until today). Could an issue with the black cartridge possibly affect the color cartridge?
3) Regrettably, I can't say for CERTAIN that I've printed in color with the current cartridge; I can't remember when I installed it, but I'm ALMOST sure that I have. This is another reason that I suspect something internal happened and it's not just the cartridge. I hope I'm wrong, or that there's a fix that doesn't involve taking the old beast into a repair shop.
Any input would be greatly appreciated. Thank you!

Okay, trying to figure out why no one will even look at this...I read the first sticky, so in case this helps in the etiquette department: I have searched, and haven't found answers to these specific questions. My operating system is Vista, and my printer is connected via serial port. I think I have done everything that's suggested. Please, can anyone give me a hand here?

Specific questions about a RAM upgrade to 4GB on my MBP

I have a MBP model MA895LL/A. Currently populated with the original memory (2GB)
Recent clean install of Snow Leopard, with all current updates.
Specific questions:
What memory does Apple use in their laptops? Does it really matter if you get the same manufacturer for complete compatibility?
Do timings matter? Will faster timing improve performance slightly, or is it a waste of money to go for the faster stuff on my specific model (Intel Core 2 Duo T7500)
Best to populate with 2 sticks X 2?
Finally, how about manufacturers? Anyone have any positive experiences with specific manufacturers, or, horror stories they can share?
I guess I just want to buy the best memory for my MBP. I build my own PCs, but I'm not sure if the Mac is a little more picky, RAM wise. Cost isn't really a factor. I'm willing to spend a little more, and buy the right stuff, and only do it once, without the hassle of sending it back, etc.
Any advice would be great. I know its possible this question has been answered many times before. I guess I don't know where to look...

Uh, yes, this is asked just about every day, like here:
http://discussions.apple.com/thread.jspa?threadID=2154109&tstart=0
Using the "Search Category" box in the upper right works.
To answer your questions, since you likely have the 2 slots filled with 1GB DIMMs, you need to get a pair of 2GB to max the RAM. I guess you could use 1 OEM stick and one 2GB stick for 3GB total, but I would just go for 4GB. If you are under warranty, save the original RAM, as Apple seems to dislike seeing any 3rd party RAM no matter what. Put the OEM RAM back in if you need warranty work.
I've seen several brands OEM, a lot of Hynix and Samsung, but it is probably all well tested to Apple spec. Otherwise, brands mean nothing, but see the above linked thread. I prefer to go with the exact spec'd RAM myself. I believe "faster" RAM does not run any faster. Vendors mentioned in the linked thread all have selector aids to find the exact RAM for your model.

New user and disgusting features - solveable questions?

Hello all there
I am a new iPod owner, migrated from a hateful 2 year old (now completely broken due to hate) MP3 player, and despite there are some interesting features, I have found some others that are making me considering asking my money back.
Luckily I have no problems regarding USB or other things as a lot of you have experienced, I put the CD first of all and installed everything. No problems installing anything and the device was happily detected as an extraible unit which I liked very much (my previous player appeared as a "thing" instead as a drive)
Its sound is pretty good, I like the sound I get. It's pretty customizable in terms of menus, and some other things like simplicity, despite there are things like the touchpads that I will never like and this is no exception, but this one works finer than any I have tested.
What I don't have liked up to date, and I own it for 2 days (it's november 2nd), are some ugly or very ugly (should I say very very ugly? :D) features it lacks or it's designed to lack of. I like music very much and so I want it to be played the best way a player can provide. I also want players to be simple as a plastic duck mechanism, and somehow this player fills the bill, but not in these cases I want to expose and ask.
1) 10 GB already copied and no album/artist/genre displayed
Of all my media library, consisting of a folder with subfolders and files inside these subfolders (and no 'simple icon' for any program), where I do the things I want, like extracting songs from my CDs and turning them into MP3 files inside folders with the name "Band - Album", I chose folders for a size of 10 GB and, via explorer, copied & pasted on the root of the new drive, the iPod.
No album/artist/genre/simple thing was found when I ejected the drive and started to browse.
I must say, it froze twice before and after the copy. Luckily I knew, from reading the manual, how to make it work again. I expect things to freeze, despite it only shows bad programming from the company.
But I saw the library as before I put it on for the first time. And there are 10 GB of MP3 files.
My first question I asked to myself was: should I use the iTunes? I answered myself: I can't be bothered to be slaved to use a program with a player. That's one of the things I hated from my old player. And this one appears to be a removable drive. Good. But there are 10 GB of MP3 files and I can't play any of these albums.
Somehow I used the iTunes and it started to do things. Like copying a whole folder with my albums (ALL OF THEM!!!!) to the player, or so it seemed to me. Well, first of all I don't want a program to copy everything it wants by simply saying it "This is my media folder where I decide what to be played here" (something like importing library was selected or pushed, I can't remember). I aborted it quickly as I saw the bar. FFS, to have a structured folder of my media doesn't mean I want ALL OF IT inside my player!!! How on earth you want me to select among 3,500 songs if you display them all to me in a complete raw list!!! Anyway, in the process it seemed to copy 3 albums before I stopped (needless to say, these albums were already in the player!!!). 2 were "sorted" and one was "unsorted", I mean, in the correct song order. The "unsorted" was alphabetically done according to WHATEVER so the order was never pure.
I saw folders like Contacts, Notes and so on (what do we do us that don't use Outlook or Outlook Express and want to use these features? "Brilliant" one, designers... ¬_¬ Luckily I don't care about them) so I tried creating an 'Albums' folder and putting albums inside. Same success.
So I asked myself again: are there ID3 tags needed always? The answer is simple: no. Because among these albums there are albums with and without tags. All of them unseen.
My questions thus are these regarding the unavailability issues:
Q1,1: how can I make these albums visible to the iPod?
Q1,2:

... beautiful feature to truncate posts...
It continues here.
... Q1,2: from now on, and for this player, am I a slave to iTunes?
Q1,3: will anybody make a simple program for linux for using these devices? Luckily I have found some tools for Mandrake. But I would appreciate things were less complicated or companies take a look at this market.
Q1,4: will anybodoy make, at once, a choice in a menu that allows the user to NOT TO SORT THE PLAYER BY THE ID3 TAGS??? My classical sort was and is in my 'puters to sort media by folders consisting of "Name of artist - Name of album", be it single, double, triple or quadruple, and inside, files with or without tags. For more than 1 CD albums I use the same folder, with songs named "CD# song_# song title". In these cases there are no tags because the stupid song# tag forces things that uses it to sort albums according to it. In albums like "Gov't Mule - Live... With A Little Help From Our Friends (collectors edition - 4 discs)" I ended up, in my old player, with first playing the first song of each CD, then after these 4 first songs, their 2nd 4 songs, then the 3rd ones... So I wiped the ID tags and finally it was sorted well, so I was happy. Is it so hard to ask for an option like "Do not read ID tags"????????
2) Live albums
I am a fanatic of live albums. I love to listen to them more than any studio album. I have single, double, triple and quadruple live albums I could listen to for hours, and from start to finish, and enjoy them all.
I love to hear the public cheering and screaming, singing the songs, etc etc due to excitement the live albums give. My old MP3 CD player made, and a lot of car MP3 CD players make, a 2-3 seconds pause between songs. As for studio albums, but not for all of them (see Marillion's "Misplaced Childhood") show no problems, but for us that want continuity for albums like live ones, it is a disappointment.
This player puts pauses between songs.
Ok, less than 1 second pause, but I hate pauses. The feeling of the album is broken. There are silences where they shouldn't be. I ended up so excited I had to stop playing it.
Q2,1: can I correct it from the control panel of the iPod or the iTunes? If not, will it be corrected on future updates?
3) The sorting mania
From some time I have seen players sort the albums in numerous ways: by genre, album name alone, artist name, year, etc. etc. etc. So let's suppose I want to make my list, WITHOUT HAVING TO MAKE A FIXED PLAYLIST JUST BECAUSE THESE ARE THE SONGS I WANT TO LISTEN FOR TODAY OR FOR 3 DAYS AND WHO KNOWS WHAT WILL I LISTEN TO NEXT WEEK, of some albums from some different artists. Some of them are simply called "Live" (for example, Golden Earring, Johnny Winter, Foghat, but I don't want to listen to Johnny Winter).
By having sorted it by album name, they would appear as "Live". Which one belongs to who? If I go via Artist, I would have to jump as a frog from artist to artist and then browse their album list. If I go from Genre, I simply dunno because it is so mad I don't want to test it.
Q3,1: If they are sorted my way (full list of albums named in my case "Artist - album 1", "Artist - album 2", but you can sort it the way you want to), I only have to move up and down and click on "Add me this one". Is it possible or must I go the crazy way?
The package is beautiful. The player is also beautiful. Maybe I am a weird user because my demands are not expected. But I am a player user and I have my preferences. Nobody seems to care about people that want no complication. I am seriously thinking about getting my money back any way I can. I am asking friends if they can be interested in getting it because I am so extremely disappointed for an 319 player I want my money back.
Please, people that makes MP3 players, make things easier. Or just think about us and ask us what they would be. There is people that doesn't want any other sort than a simple album list. And that th

General and specific questions on the applicability of Sun Studio 11

Hi. In an e-mail letter from Sun Microsystems I read about Sun Studio 11 to "utilize its record-setting parallelizing compilers." From this message I was attracted by the possibility of adding something like parallel processing, not by changing the processor (hardware), but by adding Sun-Studio-11 software to a Linux operating system. Now I already have a Fortran compiler, the Intel Fortran Compiler for Linux, which is free and can handle Cray-style pointers, a feature hard to find in a free Fortran compiler.
1a. So for the most basic of questions, without having parallel-processing hardware, just an ordinary processor [a 1-GigaHertz (GHz) Advanced MicroDevices Duron central processing unit, in my case], is it possible to have parallel processing and thereby increase one's computing speed by installing Sun Studio 11 in a Linux operating system?
1b. If so, by what factor could one expect the speed of computation to increase over not having Sun Studio 11 installed? (If the gain in speed is dependent on the type of computations being performed, I imagine possibly using a Fortran code to perform numerical calculations using and perhaps searching for minima or maxima in a two-or-more-dimensional surface. So please give me an idea of the sort of gain in speed one could expect for these two types of activites, calculations using formulas and searches for minima and maxima among already-computed quantities.)
1c. Again if so, how could one just by adding software have parallel processing without two or more hardware processors? In other words, what is the basic working principle of the software to make the simultaneous performance of multiple tasks (multitasking or parallel processing) possible?
2a. Does Sun Studio 11 include a Fortan compiler?
2b. If so, must one use it to have parallel processing with Sun Studio 11?
2c. Or will the Intel Fortran Compiler for Linux work with Sun Studio 11 to have a parallel processing capability?
Concerning hardware requirements I read that Sun Studio 11 requires a minimum of 512 MegaBytes (MB) of memory, presumably Random Access Memory (RAM). My Hewlett-Packard, ZE1110, Pavilion, notebook computer has 256 MB of RAM, but is expandable to a maximum of 512 MB of RAM. So in this respect it is in principle at least technically possible for me to meet the minimum system requirement for Sun Studio 11 with my computer, if I choose to increase its RAM. Somehow accommodating the cost of such a RAM addition, including whether one may have to buy two, matching, 256-MB RAM modules or just presumably one additional 256-RAM module, is another requirement. But before spending money for such an upgrade, one should first thoroughly investigate other matters to determine if other things are going to work and to determine what gain, if any, one could expect in computing speed with Sun Studio 11 and an additional 256 MB of RAM; then decide, based on such data, whether the purchase is personally worth the money or not. That's one motivation behind this posting; another motivation is for me to learn some things.
Lastly I would like to here thank whoever was thoughtful enough to provide the Sun Download Manager (SDM) 2.0, which allows the pausing and resumption of the 207-MB download studio11-lin-x86.tar.bz2 for the Linux version of the Sun Studio 11! Using a slow, dialup, Internet connection like mine having a maximum speed of 28.8 kilobits/second, this makes it possible to download that file over a number of Internet sessions instead of having to have an uninterrupted, 19-or-more-hour Internet session. Besides the invconvenience of tying up one's telephone line for that long a time, it might be even be difficult to have such an uninterrupted Internet session for that long a time. I have at least started such a download using the SDM 2.0 potentially over multiple Internet sessions. Whether or not I carry it out to completion could depend on whether everything looks good with Sun Studio 11 for my particular situation. Thanks in advance for your help.

Thanks for both of your postings here. I'm mostly trying to learn something here.
From Maxim Kartashev: "For example, if one thread (or process, or lwp) frequently performs an I/O operation, then the other thread (process, lwp) can utilize processor resources to perform, say, some computations while first one waits for operation to complete."
I think I might understand what you meant above. I guess lwp in the above context stands for light-weight process. And I think you may be talking about a potential gain in speed with just one, ordinary processor. I guess you meant that one program, or perhaps group of programs, could perform input/output processes at the same time it is performing calculations because different parts of the processor are being used in these two groups of processes. Then on "while first one waits for operation to complete" I guess you meant that if the input/output operations finish before the computations finish, then thread 1 that was performing the input/output operations will have to wait until the current computations ordered by thread 2 are complete before thread 1 can utilize the computational resources for its own computations; i.e., two threads can't use the same computational resources of an ordinary processor at the same time. How is my thinking so far, Maxim, right, partly right, or all wrong?
Now if the above thinking of mine is right, then it appears that one could have some gain in speed doing things like you suggest with just one, ordinary processor. And if so, I imagine that the gain could be a maximum of a factor of two for a program that requires spending as much time in input and output as it does in computation; i.e., keeping both the computational and input/output resources working all of the time without the input/output resources waiting on the computational resources or vice versa. How is my thinking here?
If the above thinking is correct, just for purposes of discussion with just one, ordinary processor, not a dual processor, and a program which does nothing but computations there would be no gain in speed using Sun Studio 11 and a Fortran compiler over not using Sun Studio 11. In other words, to increase the speed of computation one would have to buy a faster computer, buy parallel processing hardware for an existing computer and use parallel-processing software, or somehow figure out how to harness two or more computers to work for you at the same time with instructions from one piece or perhaps set of pieces of code set up for parallel processing using two or more different computers. The latter case would be a computer analogue or "two 'heads' are better than one," not human heads, but computers. How is my thinking here?
Here I am still assuming that it is possible for one processor to be used to do two different kinds things at once. However, I don't see how one Fortran program could instruct two things to be done at once. This is because I have not seriously studied parallel processing, I suppose. That is I am used to a sequential set of instructions that proceed from top to botton down the lines of code; i.e., one instruction or line of code can't be executed until the line of code before it has been completely executed. That is the computing "world" with which I am familiar. So how about someone here teaching me with an example of parallel-processing Fortran code how parallel processing works, explaining what instruction or group of instructions tells the computer to execute input and computational instructions at the same time?
Based on the encouraging information from one or more other people I have been able to use the Intel Fortran for Linux 8.1.024, if I remember correctly, in a computer with a 1-GigaHertz (GHz), Advanced MicroDevices (A.M.D.), Duron Processor. So this is at least one case where it is not essential to have an Intel processor to use the Intel Fortran Compiler for Linux 8.1.024.
Is the Sun Fortran compiler free for personal use? And can it handle Cray-style pointers?

Newbie Oracle Enterprise Manager 11g feature availability question

Newbie question here. I am new to Oracle 11g and new to this forum. I ran a search on this question and came up empty so hopefully there is a kind and knowlegable soul wo can help.
I recall in earlier versions of Oracle Enterprise Manager for earlier versions of Oracle there was something called Oracle Enteprise Manager Reporting accessible from the OEM web.
One of its key features was the ability to make custom "Additional Reports". In our current environment this is installed and works great. I don't know if it was an add on to OEM, or if it was built in. It was built a long time ago and I wasn't arround for that build. All I know is it works and it suits our needs.
Well we are now trying to build a new Oracle dev box to replace the current dev environment. We would prefer to not lose any existing functionality we have... and if possible not have to reinvent the wheel. The new box has Oracle 11g.
**Here comes the dumb newbie questions. **
Does Oracle 11g Enterprise Manager support 9i-style Enterprise Manager Reporting and Custom Reports?
Is it called that in 11g or has it been renamed to something else?
Is it it a simple matter of configuration or is it an add on that needs to be installed?
Any help would be most appreciated.
Thanks,
Wayward Oracle Newbie looking for an Oracle Home

Oracle 11g does not support 9i-style custom reports. There is a new reporting framework - Information Publisher available in Grid Control 10+ versions. The new reporting framework does support custom reports as well. Click on the Reports tab to access the functionality.
Regards,
Leslie

Learning curve for a non techie-Business Catalyst. Two specific questions.

Hello everyone,
Thanks for reading. I am a non techie who is looking at website development as a secondary skill.ie. having the know how to atleast relay my ideas to web developers and ideally to be able to tweak and in the end able to create my own websites.
In this regard, I feel Business Catalyst is an excellent tool, for people like me which mitiagtes the knowledge of coding to an certain extent. I am currently going through some of the content listed in the forums. Is there a book that provides end to end detailed steps of all the implementation to complete a fully functioning website and how much is the learning curve in this regard?
Also,
Business Catalyst offers all in one features, is it possible to use 3rd party in place of default tools for specific function, say use wordpress for blog and a different email marketing service?
Have a good one.
Thanks
Satish

I personally would tend to prefer wordpress for a small non-commercial website/blog. Its ecosystem of plugins is far more diverse than BCs and you get direct access to the code if you want. BC's blog and forum modules seem somewhat like afterthoughts designed by marketers for marketing, and there's some unevenness to the way they implement what HTML and templates you have access to and what you don't in different context, so to a degree wordpress gives you more fine-grain control over a site.
The transverse of this is that with open source software you don't necessarily have the quality control or guarantee of long-term maintenance that you might with BC. Business Catalyst is far more initially optimized for business (obviously) and its servers can likely experience a higher load and greater uptime than you might get on a typical hosting service with wordpress.
Wordpress is kind of notorious for being hackable, mostly because of its ubiquity, although if you work on it it can be secured to a reasonable degree I think -- I'm not aware of any security issues regarding Business Catalyst, apart from recent issues with the captcha and spam which might have been resolved with Akismet and Recaptcha (both of which you can also get on Wordpress obviously) but personally I don't like having all of my accounts linked with a single Adobe username/password.
But then again, I have to trust that Adobe has their **** together and there isn't some festering zero-day sitting at the heart of all of it because the price you pay for playing in BC's sandbox is just that -- it's their sandbox. They're not releasing the code. If you can't change it with an existing module setting or can't hack around with with javascript then complaining until they fix it's your only option.
In short, I think it depends on your needs. Neither is entirely the wrong answer, and both have their issues. I've been just as frustrated with some of the rendering bugs and limitations in BC as I have with the way Wordpress (IMHO) overdoes abstraction while simultaneously sticking with its horrendous code-and-content mixing template style. If you have inventory and need to push stock and don't really care about mucking around with server-side code or anything really complex than BC will probably work for you, and of course there are always sites like bcgurus and these forums to help out with edge cases.

JMS Specification Question regarding persistent messages and reliability.

In section 6.15 of the JMS Specification, titled reliability it is stated that:
"When all messages for a topic must be received, a durable subscriber should be used. JMS insures that messages published while a durable subscriber is inactive are retained by JMS and delivered when the subscriber subsequently becomes active.
Nondurable subscribers should be used only when missed messages are tolerable."
Then in a table following the above text it states that a nondurable subscriber on a topic flowing persistent messages will receive a message "once-and-only-once (missed if inactive)."
To me this implies that if a nondurable subscriber is active, it is guaranteed to receive all persistent messages published to the topic while it is active. However there seems to be some ambiguity about what it means to be "active." Does active mean subscribed, does it mean subscribed and not busy processing messages, something else?
I ask this because I'm seeing a somewhat slow subscriber not receiving all persistent messages published while it is subscribed. This was surprising to me, given my interpretation of this reliability clause, so I'm wondering if I have not interpreted it correctly in this case.
Could anyone fill me in, particularly if you had something to do with writing the spec or can point me to the rationale behind this portion of the spec?
Thanks,
Jeff Singer

I am looking at the JMS 1.1 Spec version 1.1 April 12, 2002.
Section 4.10 "Reliabilty" has what reads to me as kind of a CYA statement that the contributing JMS providers got inserted. It reads:
"A JMS provider may have resource restrictions that limit the number of messages that can be held for high-volume destinations or non-responsive clients. If messages are dropped due to resource limits, this is usually a serious administrative issue that needs attention. Correct functioning of JMS requires that clients are responsive and that adequate resources to service them are available.
+
+
+Once-and-only-once message delivery, as described in this specification, has the important caveat that it does not cover message destruction due to message expiration or other administrative destruction criteria. It also does not cover loss due to resource restrictions. Configuration of adequate resources and processing power for JMS applications is the job of administrators, who must be aware of their JMS provider's reliability features."
+

PDF Version Specification Question...

I was using Epson Scan software with an Epson Perfection 4490 to scan documents directly to a PDF. I noticed that the PDF files that are created are the version 1.0 specification. They are actually copies of genealogy documents...all B&W with no need to be edited or anything. I basically only need an archived digital copy of the documents with no need for any of the features of the newer versions. Is there any reason not to continue using the 1.0 spec? Will it continue to be fully compatible with newer versions of Adobe Reader? Thanks.

Are the PDFs just images, or are they text? I know the pages you are scanning look like text to you, but that doesn't mean the files you end up with contain text - they may just be "photographs" of the pages. You can check this by selecting the text cursor in Adobe Reader and trying to select a few words. If you can't do that, you just have an image.
If all you have are images, just save them as images in PNG format - PDF isn't getting you anything.

TIFF Format Specification Question

This isn't a Java-specific quesiton, but I was hoping someone here would be able to help as I have tried numerous other avenues already.
I�m working with (TIFF) images that have multiple layers, and each layer can have different min/max values. I want to store these min/max values for each layer in the .tiff file, in the SMinSampleValue and SMaxSampleValue tags. So if I have 3 layers I need to write 3 mins and 3 maxes down.
The documentation for SMinSampleValue/SMaxSampleValue says:
�Note that a value should be given for each data sample. That is, if the image has 3 SamplesPerPixel, 3 values must be specified.�
However when I use libtiff (haven't tried this in Java yet but it would be similar I guess):
TIFFSetField( newTIFF, TIFFTAG_SMINSAMPLEVALUE, min1, min2, min3 );
OR
===
TIFFSetField( newTIFF, TIFFTAG_SMINSAMPLEVALUE, min1);
What gets written is min1 three times, so if min1 is 40, then 40 40 40 is written, due to a variable "count", I don�t understand where the �count� for the tags gets set, I shall look into that further.
But my main question is how do I write multiple different values for SMinSampleValue and SMaxSampleValue using tifflib? How do other TIFF readers/writers do this (format question), since I want to be compatible with them.
Thanks,
HappyDeveloper

Hi,
I am seeing the similar post in SDN and some replies state the following. Have a look into this
Often this error occurs because the TIFF file you have has been saved with some form of compression. You need to open in a picture edit program and save as TIFF making sure options are set so there is no compression.
Regards,
Venkatesh

ESA C670 feature specific questions

Similar Messages

Maybe you are looking for