ESATA for Power Mac Quad

Is it possible to connect external eSATA drives to a Power Mac Quad? I want to take advantage of the speed gains.
Thanks

Hi-
Definitely Firmtek has a good product.
Sonnet receives favorable reviews.

Similar Messages

Should I upgrade my Power Mac quad core 2.66 or go for a new(er) machine?

I have a 2009 Power Mac, quad core 2.66 ghz, 6GB RAM, OS 10.6.8 and primarily run graphic apps (Adobe Photoshop, InDesign, Illustrator, etc.) for Graphic Design projects and Photography. I've begun to run into sites that want newer versions of Safari and am thinking I should upgrade for security purposes. Firefox won't load (crashes machine), can't upgrade Flash-- wondering if it's time to upgrade OS but when I look at the latest version it won't run on the machine.
I've read where I can purchase a new graphic card and then "hack" the system to run the latest OSX but am wondering, after all is said and done with costs would I just be better off getting a new(er) machine (maybe a powerbook i7)? Would the performance be about the same? I love my Power Mac (the inside is so perfectly designed) and, aside from the browser issues it generally does everything I need. graphic cards that are recommended don't seem to be in production any longer and those that are listed retail for around $350-$500. A RAM boost (extra 16GB for $200) and even a processor upgrade from OWC (http://eshop.macsales.com/shop/turnkey/MacPro/2010_Xeon_Processor) ($500-$600) and conceivably I could run this machine into the ground.
Thank you for any thoughts or insights.

Ah, this is why one should not post late at night with little sleep. Thank you all for the answers and kind responses of help.
Very good suggestion to reinstall the system and I shall do so. I believe this is the MacPro forum, is it not? Should I still repost? I used everymac.com to determine my system BUT posted the results incorrectly (corrected below and yes, it is a 2006). My apologies. I ran the software that THE HATTER suggested and have the results below. I'm not opposed to spending money to either upgrade or purchase a new(er) machine-- simply looking to spend the money necessary wisely for the best possible return. Thank you again for the help.
ETRECHECK:
(I'm only posting part of this-- I don't know if there's a posting limit or protocol on posting). I am running CS5
Hardware Information: ℹ️
Mac Pro (Verified)
Mac Pro - model: MacPro1,1
2 2.66 GHz Dual-Core Intel Xeon CPU: 4-core
6 GB RAM
DIMM Riser A/DIMM 1
2 GB DDR2 FB-DIMM 667 MHz ok
DIMM Riser A/DIMM 2
2 GB DDR2 FB-DIMM 667 MHz ok
DIMM Riser B/DIMM 1
512 MB DDR2 FB-DIMM 667 MHz ok
DIMM Riser B/DIMM 2
512 MB DDR2 FB-DIMM 667 MHz ok
DIMM Riser A/DIMM 3
512 MB DDR2 FB-DIMM 667 MHz ok
DIMM Riser A/DIMM 4
512 MB DDR2 FB-DIMM 667 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Video Information: ℹ️
ATY,RadeonX1900 - VRAM: 512 MB
VX2336 SERIES 1920 x 1080 @ 60 Hz
hp f1703 1280 x 960 @ 75 Hz
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 89 days 2:15:37
Disk Information: ℹ️
WDC WD2500AAJS-41RYA0 disk0 : (232.89 GB)
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.72 GB (18.35 GB free)
Hitachi HDT725050VLA360 disk2 : (465.76 GB)
- (disk2s1) <not mounted> : 210 MB
500GB (disk2s2) /Volumes/500GB : 499.76 GB (92.11 GB free)
WDC WD1002FAEX-00Z3A0 disk1 : (931.51 GB)
- (disk1s1) <not mounted> : 210 MB
1TB Drive (disk1s2) /Volumes/1TB Drive : 999.86 GB (760.73 GB free)

Cleaning heatsinks on Power Mac Quad G5?

Can anyone advise me how I get at the processor heatsinks in my Power Mac Quad 2.5GHz G5 (late 2005)? I would like to check them for dust and clean them.
The processors are overheating badly under heavy use (one core can go over 100degC!) and I've had to set my Energy Saver option to Reduced Power to stop repeated random sleeps. I've been cleaning the fans and the radiator regularly since I discovered the latter clogged with dust, but the fans are now running hard all the time. The processors boards are under a cover behind the radiator, and I don't want to just tinker to see how to get the cover off.
BTW, my graphics processor (nVidia GeForce 6600) is regularly running between 65degC and 80degC too, and Temperature Monitor shows no reading for the <ain Logic Board Air Inlet -- any comments?
Any help or advice would be much appreciated. TIA
Mike

Dear Mr. Elston,
This could be a temperature sensor failure or - even worse - a problem with the liquid cooling system. Did you already try the Apple Hardware Test on the first of two install disks provided with your computer?
The metal cover over the processor heatsinks is locked by a plastic rivet on top of the devider plate, which can be removed. Please see for an identical construction the information in the service manual for the early 2005 PowerMac, downloadable from this site (unfortunately detailed information for the late 2005 G5s is still missing).
To know for sure there's a leak, look for green cristals. It's also possible that such cristals are blocking the flow of the cooling liquid of one of your processors.
Success and best regards,
Robbert

Need new low-end graphics card for Power Mac G5 (PowerPC 970)

My Power Mac G5 (PowerPC 970) has recently died I believe due to a bad
ATI RADEON X800 XT MAC EDITION video card.
Reason for thinking its the card, is that the machine was performing its intended tasks for several days even though the monitor was snow.
Having trouble determining a low-end replacement. (I no longer need the enhanced features of the RADEON X800 for this machine.
Much appreciated if someone could suggest a product appropriate for PowerPC 970.
Thanks!

I also ran into this issue with my dual G5. When I bought it, I didn't get wireless because it was a dedicated desktop on the network, but I'm upgrading and giving it to the kids to use in a room without wired network. Now that wireless would be really nice and it looks like the official solution is:
"Apple Wireless Upgrade Kit for Power Mac G5 Dual or Power Mac G5 Quad MA252G/A"
which is really expensive and difficult to install. But the weird thing is that I do have bluetooth. I wonder if there's just some little doodad I need to connect to get wireless going too, but I can't find any info on the card, and it looks like it's buried on the motherboard behind all the cooling stuff. I'll probably just spring for one of the USB solutions.

Power Mac Quad fans going into overdrive

Hi,
I've been experiencing some strange issues with my Power Mac Quad G5 recently. The issue seems to coincide when I'm running either one of the three listed programs (FLV2 iTunes, Handbrake or Reel Bean) when they are compressing or converting files. On a couple of occasions when i've left the programs running over a period of time i've come back to find the fans in complete overdrive mode, the screen black and the computer completely unresponsive to any key commands. I have to hold the power button in for 5-6 seconds to shut it off. It re-starts normally and runs fine. Any help would be greatly received.
Thanks

Hardware monitor is the application that will monitor temps & other stuff (CPU voltages, fan speeds) http://www.bresink.de/osx/HardwareMonitor.html. I used it on my dying G5, the data always ended abruptly when the crash happened.
I think your G5 is doing the same as many others, namely crashing while asleep, then the fans go up to 100% I'd strongly recommend you disable sleep and see if it happens again. My 3 year, 2 month old G5 became useless after one of these 'sleep crashes', I think it is possible for the hardware to become damaged during one of the events, or it is the reason for the 'sleep crash'.
There are lots of threads on 'fans on full blast', 'turbo fans', 'jet fans', 'sleep jet fans'… in the G5 forums, I haven't seen one that has an answer to solve it, but consider stop using sleep & keep an eye on the number of CPU's the G5 boots with, lots of G5's have lost CPU's and I suspect this is part of the issue.
http://discussions.apple.com/message.jspa?messageID=8391812
Good luck & tell Applecare about it if you are covered.

Batteries for Power Mac G3 Beige Minitower

Where can I get batteries for Power Mac G3 Beige Minitower? I think they're Lithium batteries 3.6V 200W 922-4542.

m i g,
Here is a source for $4.99:
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
Jim
Note to others: (direct quote from above link)
This battery is an exact replacement for the below listed models.
Macintosh II series computers
Macintosh SE FDHD
Macintosh Classic (4-chip and 2-chip)
Macintosh SE/30, IIx, IIcx, IIci, IIfx, IIsi series computers
Macintosh IIvi, IIvx, Performa 600 series computers
Macintosh LC, LC II, LC III, Performa 400 series computers
Macintosh Quadra 605, LC 475, Performa 475, 477 series computers
Macintosh LC 520, LC 550, Performa 550 series computers
Macintosh Classic II, Color Classic, Performa 200 series computers
Macintosh Centris 610, 650, 660AV series computers
Macintosh Quadra 610, 660AV, 650, 700, 800, 840AV, 900, 950 series computers
Power Macintosh 6100, 7100, 8100 series computers, and Performa 6100 series computers
Power Macintosh 7200, 7300, 7500, 7600, 8500, 8600, 9500, and 9600 series computers.
Power Macintosh G3 - all models, entire series
iMac - all models, entire series
Power Mac G4 - all models, entire series
Power Mac G5 - all models, entire series

168 Pin RAm for Power Mac

Does anyone know if MT8LD864AG-6 168 pin DIMM is compatible with the RAM for Power Mac 8500 120MHz and Power MAc 7200 120 MHz?
Thank you in advance for your advice.
Robert

Hi Robert,
The ZIF processor upgrade I have in my Beige G3 MT (300 mHz originally) is a Sonnet G3/500--I wish it were a G4! I installed it when I still had OS9. It stayed in place when I installed Jaguar and, later, Panther.
As Grant mentions, I used a third-party helper program called XPostFacto, "XPF" for short. Installing "unsupported" Panther with XPF was far easier than installing the "supported" Jaguar and the computer is now more stable.
T'was Grant who talked me into trying Panther. Now I can't believe I waited so long! I used an older version of XPF, version 3.1, at Grant's suggestion. V3.1 seems to be the "sweet spot" for installing Panther. Some Beige G3 owners have successfully installed 10.4.x with later version of XPF but more users have reported stability issues than with 10.3.
If you are interested in learning more about the upgrade paths available to the Beige G3, there is a very active forum area here:
http://discussions.apple.com/category.jspa?categoryID=110
Hope this helps!
A

Video Card Recommendation for Power Mac G5 Quad

Can anyone recommend a video card upgrade for my Power Mac G5 Quad?
I am now running the nVIDIA GeForce 6600 card that came in the machine, but I'm wondering how much performance increase I'll see with a large image library in Aperture if I upgrade. I'm interested in all comments.
Also, is there a "medium" upgrade and a "kick-***" upgrade?
Thanks!
G5 Quad / 4.5GB Mac OS X (10.4.8)

I hate to say it: At the moment there is no graphics card upgrade available for the G5 Quad and the other PCI-Express Power Macs. There are a lot of threads about this topic in this forum. It is simply a shame that Apple does not offer any graphics upgrade for their former top of the line machines - but they do offer them for their new Intel Mac Pro. Maybe one day ATI will offer an upgrade, but at the moment this is just a rumor. All you can do now is to buy a reflashed PC version of the GeForce 7800 or buy a ridiculously priced spare part GeForce 7800 from a store who is willing to sell you one (there is one on the web but i forgot the url).
Power Mac G5 DualCore 2GHz Mac OS X (10.4.8)

Wich MacOS is the best for Power Mac G5?

Wich MacOS Can I update to a Power Mac G5? Somebody told me that the last one that I can update is the 10.5.8, maybe I can update it for a newest version but it can give me some troubles, is it true?

Hello,
10.5.8 IS the highest any G5 can go.
Just to be sure we're on the same page...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

I need an inlet fan for Power Mac G5

I have a Late 2004 Power Mac G5 that needs an inlet fan any good websites?

Hey Miles, Of course the fans work. Why would I offer a non working fan? Anyway I need some info as to which fan you need. They are all called inlet fans. There is the two in the back the two in the middle that slide out for access to the memory and the one up by the hard drive / optical drive bay. The fans are all off my now dead Power Mac G5 Quad 2.5GHz. This is the PCI-X Quad so the Fans all seem to be the same as the DP PCI-X Macs but not 100% sure. Do you know the part # you need? I'll take a pic and post once I get home from work.

UPS for Power Mac DualCore 2.3 ???

Hello All,
Can anyone recommend a good UPS for a Power Mac DualCore 2.3. I guess something like APC, etc...
Thanks!

Hi,
I have a Quad and it runs MUCH quieter than my previous original G5 Dual Processor. It uses the liquid cooling. However, both models make alot of noise when the DVD drive runs. Other than that, the Quad is very quiet.
I got an APC Back-UPS RS 1500VA Model# BR1500.
Overkill, but not a problem. I have the Quad, three Apple LCD's external drives, etc. The APC is silent; just when you test it (if you want to) by unplugging the power cord, so it runs on its battery, then a fan kicks in. But when plugged back into the wall, its back to totally silent. It weighs alot but once you set it up on the floor it's not an issue. It stands vertically and has a base. The software has a Mac version, but it doesn't do much. The OSX Tiger Energy Saver control Panel actually has a very good UPS section with alot of controls; the APC is connected to the Mac via a USB cord, and the control panel sees it to let you do the setup.
hope this helps...

DVI to s-video adpater for Power Mac G4?

I'm attempting to view digitial photos on my Power Mac G4 on an HDTV with an s-video connection. I've tried Apple's "DVI to video adapter" for the Power Mac G5, but it doesn't work, even after clicking "Detect Displays".
Is there a DVI to s-video adapater from Apple or anybody else that will work with the Power Mac G4? If not, are there any other options?

The Apple DVI to Video converter only works with certain graphics cards. The card has to be able to generate interlaced video at the correct scan rate, and modulate the color onto a carrier signal. For other card you would need a scan converter like:
<http://www.audiovisualdevices.com.au/viewprod.php?catid=&productid=CPT380>
This device has a VGA input, so you might need a DVI to VGA adapter. There may be other devices available with DVI input.

Dual monitor for Power mac g5 dual 2.3ghz

I wanted some advice on which monitors to get for a dual monitor setup and if its even possible to setup on my G5 or do I need a different video card?
Here's my computer spechs:
Power mac G5 dual core 2.3 ghz (late 2005)
Model: A1177
Memory: 2GB DDR2 SDRAM
HDD: 250GB
OS X 10.5.8 Leopard
The only thing I run on this is logic studio 8. I wanted to expand my setup but not sure how.
Any advice is greatly appreciated! Thanks
< Edited by Host >

It depends on which video card you have installed, though not much. Whichever card you have installed, you should have two DVI outputs available. With the minimum 256 Meg VRAM, you should be able to support two 1920x1080 monitors without a problem, and the "HD" monitors are getting very plentiful and dropping in price. Were I to buy today, I would make sure to get an LED monitor, as that flavor should have a longer overall life than a florescent panel monitor. You can find monitors in 23" dimensions for under $200 a pop, and more 27" monitors are showing up at a slightly bigger bite.

What is the max os upgrade available for power mac g5 w/powerpc processor

What is the max one can upgrade the os on a powerpc power mac g5

Hi, 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

Optical Fun for Power Mac G5 - Chosing a Burner

Hi all,
So I have a Power Mac G5 with a burner that is not so great anymore. I burn at 1x for DVDs and on good days, burn a CD at 4x. Time for a new burner you would say. I would agree.
I have a predicament and wondered if anyone suggests a burner to go with. I'm not looking to spend a lot and just want something that would work well and fit nicely.
I found two that might suit my little G5:
Pioneer
http://www.newegg.com/Product/Product.aspx?Item=N82E16827129007
LG
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136119
Those two were Best Sellers at New Egg with nice reviews, but nothing on the Mac.
Does anyone have any other suggestions or anything that worked for you?
Has anyone used the brands above?
Thanks for reading and in advance for the help,
Bryant

Hi. The Pioneer 112D is often recommended in these forums - can't recall any adverse reports. I installed a previous version, the 110D, with no problems - works well.
The installation instructions are here
http://www.info.apple.com/usen/cip/pdf/g5/073-0807.pdf
Installation is a bit fiddly, but not difficult. There are two things to check: that the stand-offs (see Figure 8 of the installation instructions) are the right length to line the drive up with the aperture in the G5 casing - and that you remove the plastic bezel with CD, DVD, etc. on it from the front edge of the tray, so it doesn't catch on the edge of the aperture in the G5 casing - discussed here
http://discussions.apple.com/thread.jspa?messageID=4443213#4443213
If your current drive is a Pioneer, the stand-offs should be re-usable. If not, they may be able to be adjusted by not screwing them in fully, and then locking the thread with Loctite or similar.
The drive should be recognised in Blue Apple menu > About this Mac > More Info > Hardware > Disc Burning (System Profiler). If there are any problems, please post again. Good Luck.

ESATA for Power Mac Quad

Similar Messages

Maybe you are looking for