ESATA over Expresscard W500/Win7 64Bit problem

I am using a W500-4061AK3 with Windows 7 (64bit) and am not able to get my external harddisk running over an eSATA expansioncard (Trust IF-3800p) in the Expresscard slot, although the whole is perfectly working under Ubuntu 9.1. This is already the second card I try, same issue with the DeLock 61748 (Silicon Image 3531 Chipset) ... I have installed all updates via ThinVantage System-Update and all Win7 Updates from Microsoft. I don't know whether there is maybe a driver missing for the W500 Expresscard-slot for Win7 64bit? The eSATA expansion cards are both listed as Win7 compatible. Has anybody successfully used the W500 with an eSATA Expresscard under Win7 64bit? Thanks for your help.

I am currently using this eSATA ExpressCard: http://intrl.startech.com/product/ECESAT32-2-Port-SATA-6-Gbps-ExpressCard-eSATA-Controller-CardCopy speed for 462 File(s) or 7'672'800'154 bytes is 127 seconds on SATA2 Disks, good enough for me.Win7-64 running on Thinkpad W701 model 4323CTO. Got some issues with Western Digital SATA3 (6GB) disks to be resolved yet. For my external USB3 SuperSpeed enclosures I am using:http://intrl.startech.com/product/ECUSB3S2-2-Port-ExpressCard-SuperSpeed-USB-3-Card-Adapter...and this single drive enclosure (so far the best I have found and seen).http://intrl.startech.com/product/SAT3510BU3-35in-SuperSpeed-USB-3-SATA-External-Hard-Drive-Enclosure-with-Fan You can shop all that at www.compatible.eu. Critical is the ExpressCard interface, Gen1 or Gen2.Trying to find out what ExpressCard Interface is used in a Thinkpad W701 model 4323.Anyone knows more?

Similar Messages

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

GE70 0ND win7 driver problems

Hi,
I bought GE70 0ND and decided to go with win7 64bit, changed EC to non-win8 from MSI site, I read BIOS should be fine as is. I have problems with installing chipset drivers. Downloaded drivers from MSI site, made shure I downloaded win7 64bit drivers but I still get "This computer does not meet the minimum requirements for installing software". After EC update doesent recognize ethernet controler to.
If anyone can help me I would apriciate.

Quote from: Svet on 10-June-13, 21:55:04
retry with attached one
Hey Svet, Just wondering if it would be easier for he/she to run the Intel Driver Update Utility? I played around with a eSATA drive over the weekend and installed Win 7 just to see what Win 7 users are experiencing and that was able to take all the guess work out of it for me.
Oh and pipacc, if you need these here is all the other drivers you will need.
Audio
Video (nVidia)
Ethernet
Just get the stock MSI utilties off the downloads page here.
That should be everything.

High process while running itunes on win7 64bit

since i update my ituns i have problem with it i have
high process while running itunes on win7 64bit in my laptop and also i have backup problems what should i do i see a lots of user on win have same problems as me
i have removed it and reinstall it for 20 times but it dose not work

Windows 7 Home Premium user here, 32-bit as well. It really doesn't appear to matter what is open for me; as long as I've focused on some other window other than iTunes, it will inextricably start skipping almost exactly like a badly scratched CD. This is absolutely unacceptable, because this simply never happened before with any previous version of iTunes. It's simply gotten to the point where there are too many users experiencing the same issue. There are already many forum posts about this problem all over the net too, and Apple techs really haven't even responded about this at all? or are they assuming everyone's going to be more focused on listening to music on their brand new iDevices instead?
Really, everything is about quality control, right down to the software, and that absolutely should have included iTunes 10.7, but obviously that wasn't the case for my fellow windows users.

HP722c install to win7 64bit

Can't get HP722C to install on new Win7 Pro 64bit OS. I saw a long post on HP about a "bridge" but it assumed that the driver was installed and just wouldn't work. I can't even get a driver to install. The CD won't work, driver is not on Win7, and HP won't download it from their site. They tell me it's on Win7, but I have done that dance twice and it ain't there! Anybody smarter than me know how to make this 722C work on Win7 64bit? Now tell me simply and slowly, I'm over 65!
This question was solved.
View Solution.

[Please DO NOT post multiple posts on the same subject. As I composed this message I note you posted three more requests for the same information....]
There are actually three separate issues that will need to be addressed:
Most Windows 7 computers do not have parallel ports and the Deskjet 722 only supports a parallel port. There are USB-parallel converters that can be used, but many of these do not support Windows 7. Make sure the converter (if you need one) supports Windows 7. The posts tagged here have models that users have reported success with in Windows 7. The port you select will depend on the model you have, the port will typically be USB001: or USB002:.
The driver is delivered through Windows Update. Lately this has been having an issue with the update failing. To check this do the following: click Start, Devices and Printers, Add a Printer, Local Port, LPt1: (for now), Next, click on Windows Update and wait for the list to repopulate. If you get an error "Windows was unable to get a list..." then see the post here for a workaround. Once Windows Update has completed and the list is repopulated select HP Deskjet 720, Next, Next, Finish. (Do not print a test page at this point.) You can now connect the printer cable, then right click on the Deskjet 720, Printer Properties, Ports and select the proper port. [I have no way to know what the port will be for your system. Look for a USBnnn: port or check with the documentation for your converter cable.] Once this has completed and the printer shows up in the Devices and Printers folder you can continue to the next step.
Next apply the patch available here that resolves this issue of the spooler crashing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Since automatic update to safari 5.1 it doesnt open any websites anymore. i'm using win7 64bit as operating system. how could i get safari 5.1 to work correctly or downgrade it to earlier version?

i guess i said all in the topic:
had an automatic update to safari 5.1, since than it doesn't work anymore, can't open any website.
i'm using win7 64bit as OS.
does someone know how to get safari 5.1 to work at win7/64bit
or how can i downgrade to safari 5.0 again (if i try to download it somewhere, it always switches automatically to safari 5.1)
many thanks for ur help,
rainer neumüller

isn't there any apple admin who knows about this problem and knows how to solve it? i found several post in other fori who had the same problem, none was answered sufficiantly.
plz give me a chance to use safari again!

Itunes 10.5.1 Completly not working in Win7 (64bit)

This has been a total disaster update for me. I am running Win7 (64bit) with all my windows updates current. I went ahead and updated Itunes to 10.5.1.
That was a severe mistake. Itunes crashes every time I start the program. I notice that genius is running right at the start up and I manage to shut it off but it still crashes.
So far I have done the following:
Started Itunes in safe mode----Crashes
Done a complete clean install and reinstall---Crashes
Downgraded to 10.5 clean install---Crashes
Upgraded back up to 10.5.1 started back in safe mode--Crashes.
I have stopped my anti-virus during all installs and starts and it still crashes.
My system is clean of viruses.
No error messages are provided for all the crashes other than "This program has stopped working"
My frustration is awful. I really hope they get this fixed or someone can offer a solution. I am so sorry I ran that upgrade.

After a day 1/2 of frustration and tears I got Itunes 10.5.1 working properly on my Win 7 64bit Home Edition.
I concluded that the profile, lets call it blue99 was in some way corrupted. The reason is that I followed the troubleshooting steps outlined here:
http://support.apple.com/kb/ts1717
Under the heading of Create a New User Account
I went ahead and created a new profile, lets call it B99. Under this new profile, I started up Itunes and sure enough it fired right up, Itunes store came up etc with no crashes. The strange part is that when it started up, the Itunes user agreement came up. In the other profile where Itunes would crash, after I would re-install, I NEVER GOT THE USER AGREEMENT. It would just go through an install, and when it would restart, it would immediately start to crash.
So now I concluded in agreement with the suport article that it was a "user-specific problem"
With this info, I took a gamble. I did not follow the "User specific Troubleshooting" offered in the article.
Instead I followed the directions found here:
http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile
I followed these very carefully. I copied all of my files found under C:\users\Old_Username folder, in this case that would have been the profile blue99. From there I copied the folders in there to the C:\users\New_Username folder in this case B99. The most important rule of thumb is MAKE SURE YOU HAVE FULL ADMINSTRATIVE PERMISSIONS BEFORE YOU START.
I then right clicked on the B99 folder and went to Properties and under the Security tab I gave the profile B99 full permissions. After this I went back to Control Panel and under User accounts I went and turned the B99 profile into full administrator and took the corrupted profile blue99 and switched it too Standard adminstration.
I restarted my computer and logged in under B99, started up Itunes and Yay!! Itunes is up and running. No crashes so far!! When I was running Itunes on the old profile I went ahead and turned off Genius and Home sharing. In this new profile I turned on Genius and it worked with no crashes. But I don't want to push my luck so I turned it off. Itunes has been running with no crashes. This is what worked for me, yeah its convuluted but I was desperate!! I don't even consider this a patch, so much as I cheated to get Itunes running.
If someone has a simpler way to get Itunes 10.5.01 to run, please let me know!!
Please note when I started this I had already reinstalled Itunes on the corrupted profile. I did not install Itunes again on the new profile. I just started it up.

When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

Hey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

Guys I have the same problem.
Since I installed iTunes 10.5 I can't play any of my music videos downloaded from the iTunes store.
I can play music ok but no videos. I just click on the videos and nothing happens!!
Help..... is there a remedy???

HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK

my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since 2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the software is not found by software on the network.Why ı am not able reinstall it again.But so intresting it is possible install it using win7 64bits drivers.İf ı install it by these drivers ı can not use all funtions of the printer.I want use orginal software for installing it on my computer and to use all faciliies.I tried all possibilities for windows part .Delete all drivers from pc,registry part but no solution. ı would like find a solution.ıs it possible any problem windows part if it is. what kind of problem and solution.Please give me a help...

HI DeePure,
Print out the supplies status page, and let me know if all the colors print correctly?
Do you have an extra set of cartridges we can use to troubleshoot with?
Print the supplies status page
Follow these steps to print out the supplies status page from your printer.
On the Printer’s control panel, press the Setup button.
Press the down arrow to highlight Reports , and then press OK .
Press the down arrow to highlight Supplies Status Page , and then press OK .
Figure 1: Supplies Status Page
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Application on Win7 64bit throws error -50103, but not on Win XP 32bit host

LabVIEW application newly installed on Win7 64bit host throws error -50103.
Same aplication deployed from same installation disk on Win XP 32bit host have been working for 2 years withourt problem.
I did have a problem with importing the MAX configuration from the Win XP 32bit machine to the Win 7 64bit machine.
My solution was to install all the drivers from my most recent Devaloper Suite 2012 DVD.
After that the executable did run fine, except when the variuos DAq tasks are executed for the second time in a loop it thows error -50103.
If i click ok on the erro popup, everything else works fine until in the next pass of the loop I get the same error.
Why would I get error on one host but not on the other one?
How do I fix this?
Scientia est potentia!

A common error that you can find numerous posts about with a search
http://forums.ni.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3A170&q=5...

.xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

Work Environment: Excel 2013 64bit/Win7 64bit
Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
[4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
phillfri

I think I solved the issue.
Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
does not apply because the computer does not have the expected software (Excel.exe)."
Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
Environments:
[1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
[2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
phillfri

Cannot open or save files after re-install CS4 on Win7 64bit

Hi,
Re-isnstallation of CS4 on a win7 64bit plattform was no problem. But - I can not open any kind of files, neither *.psd nor *.jpg. Even creating a new file in Photoshop is not possible. I do not get a message from Adobe/Photoshop.
Now I am looking for any idea to solve this problem.
Thanks

Ok, I will add this question in the Photoshop forum and copy it to the Illustrator forum as well.
Thanks

Flash Video performance is horrible in Internet Explorer 11 & 10 Win7 64bit

Video performance is horrible with Internet Explorer 11 & 10 on a Win7 64bit system.
Flash Player version 12.0.0.70
The video is choppy and stuttering and it's dropping frames no smooth playback is possible.
HTML5 Video playback is super smooth in IE 10 & 11.
ActiveX Shockwave Flash Add On is installed correctly and activated.
ActiveX filtering is off.
nvidia Video hardware (Quadro FX 2700M) drivers are current and up to date with the latest version 332.50
Tested with Flash hardware acceleration on and off = same problem
Tested with Internet Explorer hardware acceleration (software rendering) on and off = same problem
Any suggestions what the culprit may be?

What version of Internet Explorer are you using?

ESATA over Expresscard W500/Win7 64Bit problem

Similar Messages

Maybe you are looking for