Esata port not working

Any ideas why my Fathom External HDD is not recognized using esata cable. I've just bought the Q700-3015 1IU. The driver is powered. I did however get it working via USB. Anyone know what could be wrong?

For anyone else trying to find information on this issue, if you have a SATA hard drive installed, do NOT turn on AHCI swapping in the BIOS, it will result ina hardware error for your currently installed OS.
So--no eSATA for the T410. What a waste of time and materials!

Similar Messages

  • IPad and iPhone on Dell Precision 6500 USB3 ports: not working

    Hello,
    I just got a new laptop (a Dell precision 6500) with 2 USB3 ports. Unfortunately, when I try to connect my iPad or iPhone 4G to these ports, the device will enter a loop of connection/disconnection or simply have a "device not recognized" message.
    No other devices connected to these ports have any issue (I tried disk, mouse, keyboard and scanner). When I connect the iPad/iPhone to the "legacy" USB 2.0 or to the USB2/eSATA port, they work just fine.
    Any idea ?

    Look like those devices don't like USB 3. Your the first one that I have seen post anything concerning Apple devices and USB 3.

  • MSI GAMING 5 - ALL USB ports not working

    hello
    how are you every one 
    i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
    Mouse and keyborad work in bios but if the system run don't work ! and trun off
    and all usb devices
    in safe mod work 
    rellay i don't know where is the problem !
    CPU : Intel Core i5-4690K
    M.B : MSI Z97 GAMING 5
    RAM : G.Skill Ripjaws X 8GB DDR3 Kit
    GPU : Gigabyte GeForce GTX 970 G1 GAMING
    SSD:Corsair force LX 256 GB
    HARD: Seagate Barracuda 1 T.B 7200 RPM
    CPU COOLER : Cooler Master Hyper 212 Evo
    PSU : Cooler Master GM-Series 750 watt
    CASE : NZXT Phantom 410
     Thank you

    Quote from: Nichrome on 28-January-15, 00:18:47
    Hi,
    What about if you try to install drivers from your product's page?
    http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
    And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
    thank you
    i just remove USB3 controller driver and work 
    thank you all :D

  • Touchsmart TX-2 fingerprint scanner and USB ports not working

    Hi everyone,
    Please forgive me if this is in the wrong spot.
    Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
    I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
    All advice really welcome and very much appreciated!
    Thanks in advance

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • My usb port not work and hot usb port aria please help me

    my usb port not work and hot usb port aria please help me

    Hi
    Please find the link givenbelow might help you to fix your issue.
    USB Device Troubleshooting
    Fix Windows 7 “USB Device Not Recognized” Error
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Hp 15-D018TU USB SS PORT NOT WORKS

    Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
    Thanks in Advance

    Hi:
    Did you install the applicable usb3 driver?
    http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1

  • Esata Port and USB Ports Not working

    My USB ports have not been working for a long time. They will charge my phone, but windows doesnt pick them up nor any other device I connect via any of the USB ports. I recently took my computer into a shop to have them fix a wire that had come undone
    and asked them to look at my USB ports and figure out why they werent working. When I got it back they told me the USB ports were connected to the motherboard and to get them to work they would need to replace the motherboard. They said however that the Esata
    port worked and I asked them if I could use that to connect my USB from my iPhone in order to connect to itunes. They said with an adapter it should work. So I bought the adapter and of course when I connect the USB in to it, the computer wont recognize the
    device. I even tried connecting the USB directly into the Esata port and still nothing, but it will charge the phone, just not recognize it. 
    Any advice would be much appreciated.
    The computer is a Dell Inspiron N7010 running Windows 7

    Hi,
    Obviously, you can't connect USB directly into Esata port, for they are not compatible.
    Attempt to install your phone usb driver and then check if it works.
    If not, it should be related to your adater, not all adapters support data transfer.
    Andy Altmann
    TechNet Community Support

  • L550/010 USB port not working properly, non-standard USB ports

    I wondering if anyone can shed some light on this strange problem I'm having with my laptop USB ports.
    Background.
    I have a USB device (CED-M2 USB Chronograph). The device comes with Windows 7 software to upload fps readings.
    The CED has a calculator style keyboard - so you can lookup data without the laptop.
    My L550 PSLWSA-01000Q, is running Windows 7 professional.
    Problem.
    When I connect the CED into the USB port the buttons on the CED no longer operate, As soon as the USB lead is disconnected the buttons work. Uploading the data doesn't work either. The buttons freeze occurs as soon as I plug into a powered USB port (even if user not logged into Windows and programs are not running).
    I've installed the upload program onto two PC's at home (Vista Home and Windows 7 Home) and both PC's connect to the CED and upload fine. Furthermore, the CED push buttons works perfectly! So, this leads me to think that the hardware or signals from the laptop USB ports is not standard.
    I've tried all three laptop ports (e-Sata/USB and normal USB ports), same problem.
    Any ideas what could be causing this problem?

    Hi Jerry
    Firstly, thanks for repsonding.
    All L550/010 USB ports appear to work well on other devices (Sierra Wirless card, HP optical mouse, HTC phone), doesn't matter which port (USB, Esata/USB) all works fine with these units.
    I've tried connecting the Chrono via a USB 4 port expander - same problem, no comms, chrono buttons locks up. Connect to Home PC running Vista Home and Windows 7 Home and works fine 9 - just can't take those to the range.
    The Chrono unit is self powered (9V Alkaline) and it's new, so USB supplied 5V is not a problem.
    The buttons seize whenever the laptop is powered up. Also, if the chono unit is powered down, connecting the USB lead to the laptop turns it on (wakes up). This wake up functions on both home desktop PC's and laptop (good), however, with the laptop I can't power down the Chrono as the buttons don't work.
    Whilst laptop connected, and rebooting the Laptop, the Chrono buttons will work just before the Press F2 for setup screen comes up - so could it be electrical.
    I've downloaded the latest BIOS from Toshiba and Intel chipset too - no change.
    I got the unit to connect once tonight - when I plugged my mouse in at the same time - USB configured for mouse, and whilst doing that the Chrono worked. Once mouse working, Chrono stopped. Can't repeat results.

  • V570 - USB Ports Not Working

    Please forgive me if I posted this in the wrong section! First thread!
    Recently, three out of four of my USB ports decided to stop working. The one USB port that works is a USB 2.0 port that is located between the microphone jack and the DVD drive. There is also a eSATA / USB combo port. The eSATA portion works fine, but the USB does not work. At first I suspected that the USB controller was probably starting to fail. I don't understand why all but one USB port functions properly. 
    I have tried reinstalling the chipset drivers, updated my BIOS, and I tried to see if the ports are recongized in Linux. None of those work. I also checked the ports to make sure there are no bent pins. My warranty period just ended so I was wondering what I can do now. I don't mind opening up the computer, as long as I know what to look for.
    Thanks in advance!

    hi idaggerpwn,
    The USB board must be bad. Try to re-seat the cable from the USB board to the motherboard and check. If this doesn't work, check if the USB ports are somehow disconnected to the PCB. If they are, you will need to hire an a technician with board level soldering skills to reconnect them or you can contact lenovo for service to replace this part. (fees may apply)
    Check page 78 (see #10) of the hardware maintenance manual (HMM) for the USB board location. To access the USB board see page 53 of the HMM.
    Best regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hdmi port not working on HP Pavilion g7-2240us Notebook PC

    I can't get my HDMI port on my on HP Pavilion g7-2240us Notebook PC to work... Can someone please help me? (it's windows 8)

    This is ridiculous - the number of hits that come up for "Pavilion g7 HDMI not working" is astounding; yet finding a useful answer, or anything resembling a useful answer other than a document that instructs 4-yr olds on how to locate an HDMI port, is impossible.
    HAS ANYONE FOUND A SOLUTION TO THIS?  Or is this a rampant model-wide issue that HP would rather not acknowledge?

  • HDMI Port not working on Lenovo G460 Win7-64bit

    I've been trying to solve this for some months now.
    I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
    I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
    In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
    I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
    I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
    I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
    I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
    Is the hdmi port defective?
    I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it?  -->or is it just a hardware problem easily fixed with warranty replacement parts.
    Thank you
    Solved!
    Go to Solution.

    ::Update:: ----------> Partially SOLVED
    Lenovo After Service Center Report:
       1. hdmi connection is fine
    They said that it could be a software problem and that they would try to update the driver.
    Partial Solution:
    Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
    I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
    my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
    Will update solution when i get it to work 100%

  • 20" Cinema display with USB and firewire ports not working

    I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
    Any help please

    Verify that the display’s USB and FireWire cables are firmly plugged in to the
    computer. Do they show in your profiler?
    Try different ports in the computer.
    Verify that your computer ports are working with other known problem free device.

  • DVI port not working anymore after latest BIOS update on T410s

    Hi all,
    after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
    Thanks and cheers!

    Do you mean the DVI port on the docking station?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Mountain Lion Mac Mini Server Ethernet Port Not Working

    I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

    Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Constant freezing eventually led to mini port not working

    I run bootcamp, and it happens on windows as well so it must be a hardware problem. Unfortunately my coverage is up and I'm unable to pay for anything right now.
    Basically, the computer was freezing up for a while, a lot of the time it just freezes up for a couple seconds, or a few seconds at a time, and then sometimes it runs fine. Other times it will completely freeze and I'll have to do a hard shut down. Now my mini port stopped working(I was using an adapter for VGA), also both on windows and mac sides. Computer still freezes up. Just had the hard drive replaced a few months ago when it was under warranty, and it was fine until about a month ago.
    Not sure what to do, I keep things pretty clean, I used to build PC's. I ran dsk chk everything was fine.
    I want to open this thing up but

    Thanks to whoever moved this topic to the correct place.

Maybe you are looking for