ESB do not draw components

Hi Experts,
I have created a new Model Object in ESB to define Process Components, Business Object, Service Interfaces and Operations.
When i select some of these components and put in editor to draw it, nothing happen.
I am using ESB from CE 7.2. i made the same thing in ESB from CE 7.1 and all is right.
Do you know what is the cause of this issue
Thanks and regards
Marcos Brandao

Hi Marcos,
You're obviously mean ESR & not ESB right? I think this might be an authorization issue. First try changing your usage profile as reflected on page 11 of the guide below & see if that works. If it doesn't, try going through the guide for additional authorization checks.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a3efb4-57a1-2d10-a6b9-fed6d21799f8?quicklink=index&overridelayout=true]
Regards, Trevor

Similar Messages

Is there a simple example, I can see how to connect to a db using Flash 8 and actionscript? (not with components)

I have been looking all over for a simple "hello world"
example, on how to connect to a database, and pass a param, and
return a dataset. I would like one that does not use components.
(Actionscript only). That uses ColdFusion 7.x and Flash 8. Can
anyone point me to one?

Thanks Craig, I saw that example, but it was meant for Flash
MX, and according to the Flash 8 documentation, the NetServices is
now deprecated. Anyway, I posted my question on another site and
some supplied me with a simple example. Here is the url if anyone
is interested...
sample

Browser Background Color Not Drawing Completely

On the web page I recently uploaded, the page does not draw the browser background color completely when it loads. The browser background color fills in to the bottom of the sized page, below there it is white.
1. Modern Frame 2.0 - Blank
2. Set Browser Background color to Blue
3. Page background color either the same Blue or none at all. I've tested both ways.
4. Manual resize always allows the browser background color to fill in properly.
5. Footer on and off. Doesn't make a difference.
After uploading to the web, clearing all my caches, it continues to fill in incompletely.
What do you suggest I do to solve this?
Thank you - Fabe

Give us the URL for the site so we can examine it first hand. With out looking at the site you should change the theme to White theme which does not use files for background and therefore will not restrict the amount of space the background takes up. That's just a guess though.
OT
Message was edited by: Old Toad

Reader OLE server does not draw PDF-document if paper size is too big

If PDF document paper size is for example A0 (841 x 1189 mm) OLE object can be created and application shows PDF content correctly. But if application saves it's document and reopens it Reader does not draw content of embedded PDF document any more. Decreasing PDF document size to A1 solves the problem. Embedded object is not corrupted because it is possible to open it to Reader.
I'm confused why Acrobat Reader OLE server is capable of drawing PDF file content in creation phase but not later on when application opens same file containing embedded PDF objects.
"Application" means all possible application that has OLE support. I have tried this with three different applications and the behavior is same with all applications. Because of this I assume that application I'm developing does not have bug.

Hello Sig
The scanner works with a Windows computer, which proves the device is functional at a cursory level. The drivers are now distributed by Apple and this is an Apple computer. There is no scanning software provided by HP. HP's answer is that Mountain Lion takes care of all of this. I anticipate that some setting or driver was somehow tweaked since the scanner had been working with Mountain Lion until a few days ago. The device in question is an Apple product. So, I'm pretty confident that I'm in the right place.
Regards

[svn] 3580: MXMLG-243 - Path does not draw in the correct location when width and height are set

Revision: 3580
Author: [email protected]
Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
Log Message:
MXMLG-243 - Path does not draw in the correct location when width and height are set
Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
Bug: MXMLG-243
QA: Yes
Doc: No
Review: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-243
http://bugs.adobe.com/jira/browse/MXMLG-243
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.as

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Can I write Design-time for JSP custom tag(not JSF components)

I have some old JSP custom tags(not JSF components), and I want to use them in the IDE through the toolbox.
Now I have already written the BeanInfos for these tags, and they can be drag from the toolbox; but it will throw a Exception when render the tags, and the properties in the Property Editor are not which I describe in the BeanInfos.
How can I write Design-time for these tags? or whether it is possible to write the Design-time for these tags?
the Exception is shown as follow:
java.lang.ClassCastException
     at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1347)
[catch] at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1086)
     at com.sun.rave.insync.faces.FacesPageUnit.getFacesRenderTree(FacesPageUnit.java:993)
     at com.sun.rave.css2.FacesSupport.getFacesHtml(FacesSupport.java:152)
     at com.sun.rave.css2.CssContainerBox.addNode(CssContainerBox.java:373)
     at com.sun.rave.css2.CssContainerBox.createChildren(CssContainerBox.java:354)
     at com.sun.rave.css2.DocumentBox.createChildren(DocumentBox.java:90)
     at com.sun.rave.css2.DocumentBox.relayout(DocumentBox.java:160)
     at com.sun.rave.css2.PageBox.layout(PageBox.java:392)
     at com.sun.rave.css2.PageBox.relayout(PageBox.java:454)
     at com.sun.rave.css2.DocumentBox.redoLayout(DocumentBox.java:313)
     at com.sun.rave.css2.PageBox.redoLayout(PageBox.java:460)
     at com.sun.rave.css2.DocumentBox.changed(DocumentBox.java:634)
     at com.sun.rave.designer.DesignerPaneUI$UpdateHandler.changedUpdate(DesignerPaneUI.java:1012)
     at com.sun.rave.text.Document.fireChangedUpdate(Document.java:851)
     at com.sun.rave.text.Document$5.run(Document.java:631)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

I have some old JSP custom tags(not JSF components), and I want to use them in the IDE through the toolbox.
Now I have already written the BeanInfos for these tags, and they can be drag from the toolbox; but it will throw a Exception when render the tags, and the properties in the Property Editor are not which I describe in the BeanInfos.
How can I write Design-time for these tags? or whether it is possible to write the Design-time for these tags?
the Exception is shown as follow:
java.lang.ClassCastException
     at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1347)
[catch] at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1086)
     at com.sun.rave.insync.faces.FacesPageUnit.getFacesRenderTree(FacesPageUnit.java:993)
     at com.sun.rave.css2.FacesSupport.getFacesHtml(FacesSupport.java:152)
     at com.sun.rave.css2.CssContainerBox.addNode(CssContainerBox.java:373)
     at com.sun.rave.css2.CssContainerBox.createChildren(CssContainerBox.java:354)
     at com.sun.rave.css2.DocumentBox.createChildren(DocumentBox.java:90)
     at com.sun.rave.css2.DocumentBox.relayout(DocumentBox.java:160)
     at com.sun.rave.css2.PageBox.layout(PageBox.java:392)
     at com.sun.rave.css2.PageBox.relayout(PageBox.java:454)
     at com.sun.rave.css2.DocumentBox.redoLayout(DocumentBox.java:313)
     at com.sun.rave.css2.PageBox.redoLayout(PageBox.java:460)
     at com.sun.rave.css2.DocumentBox.changed(DocumentBox.java:634)
     at com.sun.rave.designer.DesignerPaneUI$UpdateHandler.changedUpdate(DesignerPaneUI.java:1012)
     at com.sun.rave.text.Document.fireChangedUpdate(Document.java:851)
     at com.sun.rave.text.Document$5.run(Document.java:631)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Applet not draw anything after resizing

Hello.
We have applet, which show tree manualy in it.
And it works fine for JRE1.4.2_05.
But after swithing to JRE1.5.0_03 we have problem:
It is not draw anything(blank window) after resizing.
But if we move other window over it or hide/show browser with applet, then it show content normally.
Is it a bug of JRE1.5.0_03 ? And how we can solve this problem?

Yeah I got similar problem with 1.5. The problem is Applet's Paint method is often called incorrectly after resizing. My case is that when I drag(resizing) the applet by its top border, it is first displayed with previous size(overlapping other frame). Folks here do not know how to resolve this.

IOS 6 showFeedbackCaptionAndDoAction() javascript method does not draw consistently

Hi!
The issue describe below seem to only appear in iOS 6
CPlayerLib.js judge() -> showFeedbackCaptionAndDoAction() javascript method does not draw the Feedback Caption consistently
sometime the feedback does not appear, I see it in the dom tree but the canvas is not drawn, the Div capturing the click is always present. Strangely when I scroll the page a bit it shows up.
Thanks

Ok I found a way to fix it.
In CPlayerLib.js cp.show method in the for loop within the if (htmlItem) I added a setTimeout(function() { htmlItem.style.webkitTransform = "scale3d(1,1,1)"},100) and it now force the canvas to repaint.
Related issue:
http://stackoverflow.com/questions/11002195/chrome-does-not-redraw-div-after-it-is-hidden

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

Hi keciakh,
To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error. Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely. Next, please remove and reseat all of the ink tanks in the printer. Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Open the paper output tray gently.
3. Select Roller cleaning.
(1) Press the MENU button.
(2) Select Setup, then press the OK button. The setup menu screen will appear.
(3) Select Maintenance, then press the OK button. The Maintenance screen will appear.
(4) Select Roller cleaning, then press the OK button.
The confirmation screen will appear.
(5) Select Yes, then press the OK button.
(6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
4. Clean the paper feed roller without paper.
(1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
(2) Press the OK button. The paper feed roller will rotate as it is cleaned.
5. Clean the paper feed roller with paper.
(1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
(2) Press the OK button. The machine starts cleaning. The cleaning will be complete when the paper is ejected.
(3) When the completion message appears, press the OK button. The screen will return to the Maintenance screen.
Reference
To access other available functions, use the mode buttons or the MENU button.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

PS CC 2014 - Brush tool will not draw a continuous line

Brush tool will not draw a continuous line, I am on a macbook pro.
Click and drag - I only get a spot.
Very frustrating.

Thanks for your answer PK. I really expected this to work as an ok workaround.... Now I've found that I cannot even cmd+tab back into CC.
Let's say I tab out into Safari. I get the Safari window on top of CC. I tab back to CC and nothing happens.
So I have to click back into the CC window to bring it back.
Does anyone know if that is a bug that Adobe are looking into?

ESB is not receiving response from BPEL

I have routing rule in ESB which routes the input to BPEL process.
ESB is not receving any response from BPEL
When I execute BPEL process independently, BPEL process is completing successfully and returning response.
but when I invoked (Sync/Async) it from ESB, I am simply getting empty response back.
in ESB console I got following message
An unhandled exception has been thrown in the ESB system. The exception reported is: "com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 7836DD907BDE11DCBFEDA1C287EB1942. Please check the process instance for detail. at com.evermind.server.rmi.RMICall.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMICall.java:109) at com.evermind.server.rmi.RMICall.throwRecordedException(RMICall.java:125) at com.evermind.server.rmi.RMIClientConnection.obtainRemoteMethodResponse(RMIClientConnection.java:517) at com.evermind.server.rmi.RMIClientConnection.invokeMethod(RMIClientConnection.java:461) at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:63) at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28) at com.evermind.server.ejb.StatelessSessionRemoteInvocationHandler.invoke(StatelessSessionRemoteInvocationHandler.java:43) at __Proxy10.request(Unknown Source) at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:104) at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:67) at oracle.tip.esb.server.service.impl.bpel.BPELService.processBusinessEvent(BPELService.java:380) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:106) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:85) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1416) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:105) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:273) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:150) at oracle.tip.esb.se
Thanks
Praveen

Is it possible to add several checkpoint in embedded java too your process to see where (on which activity) it fails.
no extra information in the domain.log of bpel on this process ?
it's possible that the bpel is started, the first activity executes ok, but the second fails ( for example xslt error) and if the process isn't dehydrated , you wont see any output in the console, but the process is already started..

Audio waveform does not draw

Since upgrading to CC 2014 we have been experiencing a few issues. One such issue is audio waveforms not drawing. We have this issue on 5 different machines.
When opening a project the audio waveforms of 1 or more clips does not draw. This seems to be random. An example: I finish editing for the day. Save the project. Shut down the mac. Come in the next day, turn on Mac, launch PP, open project. At this point some audio waveforms may draw, some may not.
I've done a bit of exploration and it seems that PP is having trouble reading the .pek files. If I shut down and delete the .pek files and then relaunch – PP regenerates the .pek files and the audio waveform draws again.
Anyone else having this issue?

I don't know if it is related but I know there is an issue with CC 2014 resetting the preview file location to default on some projects.

Perspective shapes not drawing properly

Illustrator CC 2014 (18.0.0) Mac OS X 10.9.4
So Illustrator is misbehaving today and it's not just one machine.
When drawing shapes in perspective mode, shapes are not drawing correctly. They appear to be ok initially, but when I transform them, they stop aligning to the grid as if I used free transform on them.
Also, when I try to change the stroke of an object, I cannot draw a stroke less than 1 pt and if I change the stroke alignment to inside or out, it looks like a compound shape was applied and doesn't line up (See attached images)
Stroke applied normally
Stroke misaligns when stroke is applied to inner
Stroke misaligns when stroke is applied to outer
Stroke misaligns when stroke is applied to inner and dropped to a smaller weight.

I've also noticed that every time I place a symbol or move an object a "Shapes Expanded" box briefly appears on the page.
I've never seed this before.

JViewport not drawing partially visible components

I have a JViewport (no scrollbars; I control the viewPosition programatically).
Its View component is a JPanel containing left-to-right components in FlowLayout.
Sometimes if a component of the FlowLayout would be only partially visible, it does not get drawn at all.
If user resizes the window (and the viewport gets resized that way), the partially visible component is always drawn. (I am not even manually handling this Event.)
But if I programatically resize one of the FlowLayout components, then I expect the ones to the right to move accordingly. They do, but then if the last visible one becomes only partially visible as a result of the move, then it is not drawn AT ALL. Calling validate() on the FlowLayout-JPanel and on the JViewport does not seems to solve this.
Anyone know about this? Is it something that FlowLayout is doing on purpose?
/Mel

The reason that FlowLayout wraps my stuff when an already-contained component is widened but does not wrap when a new component is added (alway at the right; never on new row), is because the width field of the container component is not automatically changed upon the resize but must be recalculated upon the add.
I looked at code from FlowLayout's layoutContainer method (included below), and it appears that the decision to wrap is based solely upon the target container's existing width:
      int maxwidth = target.width - (insets.left + insets.right + hgap*2);
          // (where target is the container being laid out)
      if ((x == 0) || ((x + d.width) <= maxwidth)) // (where
                                                                             // x is the x-"pixel counter" for placing next component
                                                                             // d.width is width of the component being placed)
          then will be put on same row
      else
          will start a now rowHowever, while reading FlowLayout, I also discovered that its preferredLayoutSize method calculates a size for as if components were all on one row, i.e. returns width = (sum of all components + insets + hgaps), height = (max of all components + insets + vgaps). Therefore, I believe the simplest solution to my problem is to change the container's width field anytime a component resizing occurs, with the following line inserted right after the resize but before the validate:
[existing code that sets the label's new text, which used to be followed by validate()]
this.setSize(this.getLayout().preferredLayoutSize(this).width, this.getHeight());
validate();It works! (But I know it is making the calculation loop through all of the container's components occur more often than I would like in gui's event thread -- response doesn't look too bad though...)
/Mel

ESB control not displaying any services

Hi,
I'm trying to get a SOA Suite installation going last few days. This is the state of the system:
database - 10g Release 2 (10.2) for windows
patches -
Patch Set 2
Patch 18: 6812783
Oracle SOA Suite 10.1.3.3.0
patches -
Patch Set 3
Interim Patch for bugs :6128263
Other than installing these components, I have not done anything else with the system.
When I go to the ESB control and log in as oc4jadmin I do not see any services like-
1) Default System
2) BPEL System
I redid the whole install process thinking I might have missed out some step, but I see the same error again. Has anybody seen this before? what trouble shooting steps would you recommend ?
thank you very much!
Odie

Hi,
Have you installed the ESB schema properly?
Cheers,
Abhi...

ESB do not draw components

Similar Messages

Maybe you are looking for