ESB(Enterprise Services Builder) access error after PI 7.1 install
We have installed PI 7.1 system. Everything went well with installation.
We can access all the components such as RWB, Directory, SLD,...
However when we try to access ESB(Enterprise Services Builder) we are geting the following error:
"Cannot connect to server using message server: ms://si5host:8106/P4"
We checked the exchange profile parameters and com.sap.aii.connect.repository.mshttpport is having 8106 value.
Did any one face such an issue. Please respond.
The problem is resolved for us.
The problem was caused because we did nt have a "FULLY QUALIFIED SERVER NAME" in the exchange profile parameters on the JAVA side.
Once we had the FULLY QUALIFIED SERVER NAME the issue was resolved.
Hope this helps other people who run into the same issue.
Similar Messages
-
Logon Error Message - Enterprise Services Builder address not maintained
Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani -
Unable to run Enterprise Services Builder
SAP NetWeaver Process Integration 7.1
When I try to launch Process Integration Tools -> Enterprise Services Builder (or Integration Builder Directory), links: http://v2:51400/rep/start/repository.jnlp and http://v2:51400/dir/start/directory.jnlp respectively, I receive following error:
An error occurred while launching/running the application.
Title: Enterprise Services Repository
Vendor: SAP AG
Category: Download Error
Unable to load resource: http://v2:51400/run/repository/com.sap.xpi.ibrep.client.jar
java.io.IOException: HTTP response 404
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.getDownloadSize(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Buy the way, under Java Web Start Configuration i have changed proxy properties to u201CDirect Connectionu201D.
JNLP file looks as follows:
<jnlp spec="1.0+" codebase="http://v2:51400/run/">
<information>
<title>Enterprise Services Repository</title>
<vendor>SAP AG</vendor>
<homepage href="http://www.sap.com"/>
<description>Enterprise Services Repository</description>
<icon href="http://v2:51400/run/start/graphics/sap6464.gif" width="64" kind="default"/>
<icon href="http://v2:51400/run/start/graphics/SAP3232.gif" width="32" kind="default"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se initial-heap-size="33554432" max-heap-size="536870912" version="1.5+"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ibrep.client.jar" part="part-9" download="eager" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ibrep.core.jar" part="part-9" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ibrep.rb.jar" part="part-9" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.client.jar" part="part-0" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.core.jar" part="part-0" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.rb.jar" part="part-0" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.mt.gui.lib.jar" part="part-21" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.mt.rb.jar" part="part-21" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.mt.util.lib.jar" part="part-21" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.mapping.lib.jar" part="part-17" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.upload.core.jar" part="part-23" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ib.upload.sap.jar" part="part-25" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xi.mapping.tool.lib_api.jar" part="part-21" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xi.flib.lib_api.jar" part="part-0" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.aii.utilxi.core.jar" part="part-28" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.aii.utilxi.gui.jar" part="part-39" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.util.rb.jar" part="part-28" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.aii.proxy.gen.jar" part="part-22" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/frog.jar" part="part-128" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/jta.jar" part="part-168" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/ejb20.jar" part="part-166" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcsapxmltoolkit~sapxmltoolkit.jar" part="part-83" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcexception~impl.jar" part="part-123" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcloggingjavaimpl.jar" part="part-130" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcblguidgeneratorimpl.jar" part="part-124" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/jperflib.jar" part="part-59" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcblniimpl.jar" part="part-127" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcjeclientlibimpl.jar" part="part-63" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/sap.comtcbljarmjarm.jar" part="part-132" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenComposite.jar" part="part-135" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenGraph.jar" part="part-144" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenGraphics.jar" part="part-157" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenGenerics.jar" part="part-136" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenGui.jar" part="part-134" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenGuiResource.jar" part="part-159" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/com.sap.xpi.ibrep.maestro.jar" part="part-9" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/tenSkeleton.jar" part="part-160" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/iaik_jsse.jar" part="part-164" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/iaik_smime.jar" part="part-164" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/iaik_ssl.jar" part="part-164" download="lazy" main="false"/>
<jar href="http://v2:51400/run/repository/w3c_http.jar" part="part-164" download="lazy" main="false"/>
</resources>
<application-desc main-class="com.sap.aii.ibrep.gui.appl.ApplicationImpl">
<argument>webstart</argument>
</application-desc>
</jnlp>
Itu2019s not a problem with host or port inaccessibility (I already got access to start page, sld, Runtime WorkBench, etc.).
Letu2019s look closer to, for example, library url : http://v2:51400/run/repository/com.sap.xpi.ibrep.client.jar (taken from jnlp file content). When I paste it to the browser I get error u201CThe requested resource does not exist.u201D (as I expected). So I have changed root in the url from u201Crunu201D to u201Crepu201D (correspondingly to XI 3.0 and PI 7.0) u2013 http://v2:51400/rep/repository/com.sap.xpi.ibrep.client.jar and I succeed in downloading single library file!!!!.
But!!!! I canu2019t change jnlp file content either on client (because itu2019s overwritten every time I launch the application) and server (because it is generated form template and system properties every time I launch the application) side, so itu2019s not solution but shows that there is something wrong with library resources or/and with jnlp script generation on PI 7.1 platform (why urls in jnlp script points to resources which does not exists in expected location?).
The question is : How to run properly Enterprise Services Builder and Integration Builder Directory on PI 7.1 platform and what is the reason of errors I have described above.Hi Szymon,
thanks for the suggestion.
I had a a bit spot of bother, too.
I found out that my Java didn't inherit browser proxy settings, even if corresponding flag was checked (I don't know why...).
I manually set proxy properties in Java and now ESB run
hope this help someone else
regards
Cristian -
Hi all,
I have a got a problem with opening Enterprise Services Builder, I'm unable to Open ESB of PI.
I'm getting the below error after i entered User name and Password of ESB
Could not Initialize class com.sap.aii.ibrep.gui.xiitem.InternalXiItemServiceForTypeObjects
Internal problem occured(INTERNAL_PROBLEM)
Please help me in resolving this issue.
Thanks,
AldoHi Preethi,
You can go to integration builder page and there in the right hand top corner you can see administration tab just click on that and then login with your user credentials,
go to Repository tab in the left hand side and then javawebstart administration -->Reinitialization and also click on Reinitialization force start
FOLLOW the Same for directory tab also.
It should work if still it is not working you can try uninstalling your java/j2sdk and reinstall j2sdk 1.4.2....
Regards,
Naveen -
Design Objects created in Enterprise Services Builder not appearing in Integration Builder
I am fairly new to PI, so hoping someone can help. I have created a number of design objects (DataType, MessageType, ServiceInterface, MessageMapping, OperationMapping). I had also imported an RFC object successfully as well that is used in the creation of the design objects. All have been saved and activated, and there are no apparent errors listed.
After saving and activating the objects, I went into Integration Builder, and created a new Configuration Scenario. However, when trying to add in the Interface Determination, Receiver Determination, Sender Agreement, and Receiver Agreement, I do not see the the RFC object or design objects that were created in the Enterprise Services Builder.
Can someone advise as to whether or not I have missed a step somewhere? Or perhaps there is something else that I need to do before I can get the design objects and imported RFC object to appear in the Integration Builder?.
Thanks in advance.
Tuan.Hi Tuan,
Are you using Business System or Business Component. If your using Business System you need to assign Software Component Version to Business System in SLD. If your using Business Component you have to add the Interface Name Manually to the Business Component. Please see the Below screen shot, you have to add Sender or Receiver Interface manually to proceed further step.
Thanks,
Satish. -
What is SAP ESB (Enterprise Service Bus)?
Hi fellow sdners gurus I have been reading threads about SAP SOA and ESB.
I do not want to start a debate on wether XI is an ESB, but more of a statement to what is SAP ESB (if XI it is, then be it).
1) What is SAP ESB (Enterprise Service Bus) today (I could not find a clear answer to is)?
2) Who uses this SAP ESB in production currently and what kind of environment (i.e. strictly SAP backend systems, or combination of various vendors backend systems)?
Can someone share some light on this topic?
As a reminder, an ESB is expected to exhibit the following characteristics (source Wikipedia):
It is usually operating-system and programming-language agnostic; for example, it should enable interoperability between Java and .NET applications.
It uses XML (eXtensible Markup Language) as the standard communication language.
It supports web-services standards.
It supports various MEPs (Message Exchange Patterns) (e.g., synchronous request/response, asynchronous request/response, send-and-forget, publish/subscribe).
It includes adapters for supporting integration with legacy systems, possibly based on standards such as JCA
It includes a standardized security model to authorize, authenticate and audit use of the ESB.
To facilitate the transformation of data formats and values, it includes transformation services (often via XSLT or XQuery) between the format of the sending application and the receiving application.
It includes validation against schemas for sending and receiving messages.
It can uniformly apply business rules, enriching messages from other sources, the splitting and combining of multiple messages and the handling of exceptions.
It can provide a unified abstraction across multiple layers
It can route or transform messages conditionally, based on a non-centralized policy (i.e. no central rules-engine needs to be present).
It is monitored for various SLA (Service Level Agreement) threshold message latencies and other SLA characteristics.
It (often) facilitates "service classes," responding appropriately to higher and lower priority users.
It supports queuing, holding messages if applications are temporarily unavailable.
Your help is greatly appreciated.
Kind Regards,
Jean-MichelPI or XI is the ESB from SAP side. PI is not a full pledged ESB on a reference model of ESB idea but it is the the framework SAP provide as a ESB product.
A Standard Based ESB Reference Model should fullfil the following features in a framework.
ESB Features Service Enablement Phase (1, 2, 3)
1) Message brokering between heterogeneous environments
2) Supports asynchronous, synchronous, publish and subscribe messaging
3) Supports synchronous and asynchronous bridging
4) Supports message formats of SOAP
5) Support for message format of SOAP with attachments
6) Support for xml message
7) Support for structured non-XML data
8) Support for raw data message
9) Support for text data message
10) Sport for e-mail with attachment message
11) Heterogeneous transports between service end points
12) Supports for FILE protocols
13) Supports for FTP protocols
14) Supports for HTTP protocols
15) Supports for HTTPS protocols
16) Supports for Multiple JMS providers
17) Supports for RMI protocols
18) Supports for web service protocols
19) Supports for CORBA protocols
20) Supports for DCOM protocols
21) Supports for E-mail (POP, SMTP, IMAP) protocols
22) Support for advanced transformation engine
23) Support for configuration-driven routing
24) Message routing based policies
25) Support for call-outs to external services to support complex routing
26) Support for point-to-point routing
27) Support for one-to-many routing scenarios
28) Support for request response model
29) Support for publish-subscribe models
30) Service monitoring
31) Service logging
32) Service auditing with search capabilities.
33) Support for capture of key statistics for message and transport attributes including message invocations, errors, and performance, volume, and SLA violations.
34) Supports clusters and gathers statistics across the cluster to review SLA violations
35) Support for service provisioning
36) Support deployment of new versions of services dynamically through configuration
37) Migrates configured services and resources between design, staging and production
38) Supports multiple versions of message resources that are incrementally deployed with selective service access through flexible routing
39) Configurable policy-driven security
40) Supports the latest security standards for authentication, encryption-decryption, and digital signatures
41) Supports SSL for HTTP and JMS transports
42) Supports multiple authentication models
43) Policy-driven SLA enforcement
44) Establishes SLAs on a variety of attributes including
a. Throughput times
b. Processing volumes
c. Success/failure ratios of message processes
d. Number of errors
e. Security violations
f. Schema validation issues
45) Initiates automated alerts or enables operator-initiated responses to rule violations using flexible mechanisms including
a. E-mail notifications
b. Triggered JMS messages
c. Triggered integration processes with a JMS message
d. Web services invocations with a JMS message
e. Administration console alerts.
46) Support for having multiple LOBs manage their own service bus based on their policies, and a service bus at an enterprise level that could act as a broker for sharing services across the various business units.
47) Support for agent plug-in to support following features
48) External providers service access for security
49) External providers service management
50) External providers transaction container
a. External providers business orchestration (BPEL Engine) and business work flow service container
51) Transaction support on message level
52) IDE Integration
53) Open standards -
Problem with models in the enterprise service builder
Hi all,
I get this message from the enterprise service builder, when i double click on one of the models on the tree on the left of the builder itself.
the message says:
Error Initializing Business Modeling
Initialization of business modeling cannot be started. You cannot work with business modeling. Check tht all required configutarion objects are available
i made all the wizards suggested in /people/werner.steyn/blog/2008/03/03/how-to-look-like-a-hero-with-netweaver-ce-esr-sr
please someone can help me to understand what the massage means?
what is a configuration object? what can i do to fix the problem?
thank you very muchclosed
-
I canu00B4t work with Enterprise Service Builder
Hi
I try to work on Enterprise Service Builder of PI 7.1, but I can't.
1. Firstly, I access to log in by http:// <server>:50000/dir/start/index.jsp. Then I can log on to Enterprise Service Builder, on this step I don't have problems.
2. Secondly I wait to open the application on my laptop.
3. Then windows 7 try to open the application but I only see the preview view on my desktop of my laptop
NOTE: I can work with Integration Builder, without any problems, it works perfectly.
I have this characteristics
<Server>
SAP PI 7.1
<client>
Internet Explorer 8 or Mozilla Firefox 3.6
JAVA 6
Windows 7 Home Basic 32 bits
I don't know if i need configure something on my computer or on my OS
Help!Hi,
From Control Panel, go to Java -> General tab, Temporary Internet Files
-> View... -> Delete all the content there.
Then go to:
> Integration buider page http://<host>:<port>/rep
> Administration
> Tab - Directory (Repository as well)
> Java Web Start Administration
> Restore Archives and Generate New Signature
If that does not helps, then you may try re-deploying the XITOOLS components
by using the JSPM and whe deploying, update it to the latest patch level.
Regards,
Caio Cagnani -
Unable to run Enterprise Service BUilder
Hi all, i have a problem similar to what i have found here:
Re: Unable to run Enterprise Services Builder
Unable to load resource: http://PI-CIPRGIA1:50000/rep/repository/com.sap.xpi.ibrep.client.jar
as explained in the link above, i find the com.sap.xpi.ibrep.client.jar but i don't understand where i have to put it!!!
besides, they speak about looking for SAP_XIPCK in the deployment perspective, but i didn't have anything called SAP_XIPCK
can anyone help me???
this is my complete log:
<?xml version="1.0" encoding="UTF-8"?><jnlp spec="1.0+" codebase="http://PI-CIPRGIA1:50000/rep/">
<information>
<title>Enterprise Services Repository</title>
<vendor>SAP AG</vendor>
<homepage href="http://www.sap.com"/>
<description type="one-line">Enterprise Services Repository</description>
<description type="short">Enterprise Services Repository</description>
<description type="tooltip">Enterprise Services Repository</description>
<icon height="64" width="64" href="start/graphics/sap6464.gif" type="splash"/>
<icon height="32" width="32" href="start/graphics/SAP3232.gif"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+" initial-heap-size="32m" max-heap-size="512m"/><!-- ==================================================================
ATTENTION: When modifying references in this file, remember to update
the corresponding files from the test-apps too!
(see repository_test.jnlp in "_ibrep_test/webapp/start" )
=================================================================== ><!Do not define parts or packages! This will be done automatically ><! XI jars -->
<jar href="repository/com.sap.xpi.ibrep.client.jar" download="lazy" part="part-69"/>
<jar href="repository/com.sap.xpi.ibrep.core.jar" download="lazy" part="part-69"/>
<jar href="repository/com.sap.xpi.ibrep.rb.jar" download="lazy" part="part-69"/>
<jar href="repository/com.sap.xpi.ib.client.jar" download="lazy" part="part-60"/>
<jar href="repository/com.sap.xpi.ib.core.jar" download="lazy" part="part-60"/>
<jar href="repository/com.sap.xpi.ib.rb.jar" download="lazy" part="part-60"/>
<jar href="repository/com.sap.xpi.ib.mt.gui.lib.jar" download="lazy" part="part-81"/>
<jar href="repository/com.sap.xpi.ib.mt.rb.jar" download="lazy" part="part-81"/>
<jar href="repository/com.sap.xpi.ib.mt.util.lib.jar" download="lazy" part="part-81"/>
<jar href="repository/com.sap.xpi.ib.mapping.lib.jar" download="lazy" part="part-77"/>
<jar href="repository/com.sap.xpi.ib.upload.core.jar" download="lazy" part="part-83"/>
<jar href="repository/com.sap.xpi.ib.upload.sap.jar" download="lazy" part="part-85"/>
<jar href="repository/com.sap.xi.mapping.tool.lib_api.jar" download="lazy" part="part-81"/>
<jar href="repository/com.sap.xi.flib.lib_api.jar" download="lazy" part="part-60"/>
<jar href="repository/com.sap.aii.utilxi.core.jar" download="lazy" part="part-88"/>
<jar href="repository/com.sap.aii.utilxi.gui.jar" download="lazy" part="part-99"/>
<jar href="repository/com.sap.xpi.util.rb.jar" download="lazy" part="part-88"/>
<jar href="repository/com.sap.aii.proxy.gen.jar" download="lazy" part="part-82"/>
<jar href="repository/frog.jar" download="lazy" part="part-192"/><!-- Engine and other components -->
<jar href="repository/jta.jar" download="lazy" part="part-263"/>
<jar href="repository/ejb20.jar" download="lazy" part="part-261"/>
<jar href="repository/sap.comtcsapxmltoolkit~sapxmltoolkit.jar" download="lazy" part="part-146"/>
<jar href="repository/sap.comtcexception~impl.jar" download="lazy" part="part-186"/>
<jar href="repository/sap.comtcloggingjavaimpl.jar" download="lazy" part="part-195"/>
<jar href="repository/sap.comtcblguidgeneratorimpl.jar" download="lazy" part="part-187"/>
<jar href="repository/jperflib.jar" download="lazy" part="part-119"/>
<jar href="repository/sap.comtcblniimpl.jar" download="lazy" part="part-191"/><!-- required for CSN-connection -->
<jar href="repository/sap.comtcjeclientlibimpl.jar" download="lazy" part="part-127"/>
<jar href="repository/sap.comtcbljarmjarm.jar" download="lazy" part="part-197"/><!-- Tensegrity Libs -->
<jar href="repository/tenComposite.jar" download="lazy" part="part-229"/>
<jar href="repository/tenGraph.jar" download="lazy" part="part-238"/>
<jar href="repository/tenGraphics.jar" download="lazy" part="part-251"/>
<jar href="repository/tenGenerics.jar" download="lazy" part="part-69"/>
<jar href="repository/tenGui.jar" download="lazy" part="part-8"/>
<jar href="repository/tenGuiResource.jar" download="lazy" part="part-253"/><!-- Maestro><!jar href="repository/maestro_ib.jar" download="lazy" /-->
<jar href="repository/com.sap.xpi.ibrep.maestro.core.jar" download="lazy" part="part-69"/>
<jar href="repository/com.sap.xpi.ibrep.maestro.model.jar" download="lazy" part="part-69"/>
<jar href="repository/tenSkeleton.jar" download="lazy" part="part-204"/>
<jar href="repository/tenLookAndFeel.jar" download="lazy" part="part-8"/>
<jar href="repository/jaxb-api.jar" download="lazy" part="part-264"/>
<jar href="repository/jaxb-impl.jar" download="lazy" part="part-0"/>
<jar href="repository/jaxb-xjc.jar" download="lazy" part="part-0"/>
<jar href="repository/jsr173_1.0_api.jar" download="lazy" part="part-265"/>
<jar href="repository/activation.jar" download="lazy" part="part-199"/><!-- end Maestro><! Aris Client -->
<jar href="repository/arismethod.jar" download="lazy" part="part-24"/>
<jar href="repository/JimiProClasses.jar" download="lazy" part="part-206"/>
<jar href="repository/jide.jar" download="lazy" part="part-40"/>
<jar href="repository/client.jar" download="lazy" part="part-14"/><!-- Aris Core -->
<jar href="repository/jaxb-api.jar" download="lazy" part="part-264"/>
<jar href="repository/jaxb-impl.jar" download="lazy" part="part-0"/>
<jar href="repository/jaxb1-impl.jar" download="lazy" part="part-0"/>
<jar href="repository/jsr173_1.0_api.jar" download="lazy" part="part-265"/>
<jar href="repository/jh.jar" download="lazy" part="part-204"/>
<jar href="repository/js.jar" download="lazy" part="part-289"/>
<jar href="repository/y.jar" download="lazy" part="part-302"/>
<jar href="repository/cl_locale.jar" download="lazy" part="part-14"/>
<jar href="repository/cl_locale_de.jar" download="lazy" part="part-14"/>
<jar href="repository/cl_locale_en.jar" download="lazy" part="part-14"/>
<jar href="repository/y-utils-2.jar" download="lazy" part="part-39"/>
<jar href="repository/y-reportexecution-2.jar" download="lazy" part="part-36"/>
<jar href="repository/y-guiframework.jar" download="lazy" part="part-25"/>
<jar href="repository/y-graphics-3.jar" download="lazy" part="part-25"/>
<jar href="repository/y-lipo-1.jar" download="lazy" part="part-34"/>
<jar href="repository/y-reportdesigner-client-2.jar" download="lazy" part="part-37"/>
<jar href="repository/y-reportdesigner-common-2.jar" download="lazy" part="part-38"/>
<jar href="repository/jdom.jar" download="lazy" part="part-10"/>
<jar href="repository/y-graphlayout-2.jar" download="lazy" part="part-26"/><!-- only for repository, when build is adapted
<jar href="repository/sapjco.jar" download="lazy" component="aris"/>
<nativelib href="repository/sap-rfc-windows.jar" download="lazy" component="aris"/>
><! end Aris ><! ssl libs -->
<jar href="repository/iaik_jsse.jar" download="lazy" part="part-13"/>
<jar href="repository/iaik_smime.jar" download="lazy" part="part-13"/>
<jar href="repository/iaik_ssl.jar" download="lazy" part="part-13"/>
<jar href="repository/w3c_http.jar" download="lazy" part="part-13"/>
<property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE"/>
<property name="jnlp.com.sap.boot" value="rep,native"/>
<property name="jnlp.com.sap.aii.ibrep.core.cms.enableTransportWizard" value="false"/><property name="jnlp.com.sap.aii.ibrep.core.transport.doubleFormatExport.showFlag" value="false"/><property name="jnlp.com.sap.aii.docu.url" value="null"/><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000"/><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE"/><property name="jnlp.com.sap.aii.ibdir.core.transport.doubleFormatExport.showFlag" value="false"/><property name="jnlp.com.sap.aii.ibrep.core.aris.AllowBroadReportAccess" value="false"/><property
[missing part due to post limits......]
<application-desc main-class="com.sap.aii.ibrep.gui.appl.ApplicationImpl">
<argument>webstart</argument>
</application-desc><!--
<application-desc main-class="com.sap.aii.ib.gui.applcomp.BootLoader">
<argument>webstart</argument>
</application-desc>
-->
</jnlp>Hi all,
trying to fix the problems above with Enterprise Sercvice Builder i have made a mistake:
i have undeployed SAP_XIESR and now i can't find it anymore!
the link where i find the ESR and Service Registry is no more accessible!
is the undeploy reversible?
these are the details:
from NWDS , deployment perspective, from tab undeploy view i selected SAP_XIESR added in the list of things to undeploy and run undeploy
this SAP_XIESR is now vanished, when i make that action i thought that it was reversible, but now i can't find SAP_XIESR in no place around!!!
how can i reverse that action? -
Steps:- Import SWCV from SLD into Enterprise service Builder
Hi All,
I have created new SWCV in SLD.
What are the STEPS :-mport SWCV from SLD into Enterprise service Builder
Thanks,
AnshulAbhishek,
I am using PI 7.1. And there is no option showing Tools --> Transfer from SLD .
It has only Import Design Objects option.
Please advice.
Thanks,
Anshul -
SDN,
When i am trying to open the ESR(http://<hostName>:<PortNumber>/rep)
when i click on Enterprise Service Builder there i can i find a pop-up repository.jpnl to SAVE
Please let me know do i need to install anysoftware to open Enterprise Service Builder?
RAviHi,
as far as i know You do not need to install any additional software and you have to follow these steps
in CE 7.1 have you to execute the esr.
http://<host name>:port/nwa >Configuration Management>scenarios-->configuration wizard
-->Configuration of ESR in CE
and you have to add 3 .sca files and to add those sca files refer the wiki
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=131760250
regards
Manohar -
Imported Object Enterprise Service Builder
Hi..
when Imported Object Enterprise Service Builder
Connection data for the R/3 import is incomplete
Open the software component version SAP BASIS 7.10 and
enter the system and the client
can not import MATMAS object
How to resolve that problem
regards
chandanaDouble click on teh software component version in ESR for which you want to import idoc. Then select the raido button import of idoc interface from sap systems permitted. Then give the R3 system information like the system name, client and then try once again. It is nothing related with technical and business system.
step by step:
double click on SWCV->
Interface Import ->you have to provide system name , client then ll try to import
pls refer : http://forums.sdn.sap.com/thread.jspa?threadID=2143371&tstart=0 -
Import of Software Components to Enterprise Services Builder in XI/PI 7.10
Hi,
I'm searching for a way to import software components into the Enterprise Services Builder. My system is a XI/PI 7.10.
I created the software component in the System Landscape Directory. Can anyone tell me a way how to import those components into the ESR?
I cannot find import from system landscape directory in the tools tab.
Thanks in Advance,
Carsten<b>Hi Carsten,
Its simple mate...just open "Enterprise Service Builder" page.There go to menu option "Object --> Create" or click on "Create Object" icon, then you'll get a window from where you can choose radio button "Import from SLD".
And to create local software component from ESR itself then click on radio button "Local Software Component Version".
Cheers..
Ram.</b> -
Reporting Services Registry access error
We have an existing setup of SQL 2014 & SP 2013 Foundation server which works fine without any issues. Then, we have been installed the following components into SQL Server
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint
Then, I provisioned a new SQL Reporting Services Service Application in SharePoint.When attempting to
Manage the Service Application and click on ‘System Settings’ in Central admin of SharePoint and getting below error.
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> Microsoft.ReportingServices.Library.ReportServerDisabledException.
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. --->System.Security.SecurityException.Requested registry
account is not allowed.
I understand from my investigation, an above said error should thrown only if I'm changing the user of reporting services. But in my case, I Just installed Reporting services and trying to do the configuration. Not sure why I'm getting such registry access
error.Hi orionkings,
According to your description, when you click the “System Settings” in Central admin of SharePoint, the error is thrown out.
In your scenario, the error “Requested registry access is not allowed” could cause by SharePoint web service account can't access some registry keys. To fix the issue, you can use Process Monitor to monitor the registry, and grant Read permission for the
corresponding key.
Reference:
Sharepoint and SSRS integration Error Requested
registry access is not allowed
Quick Solution 5 : Requested registry access is not allowed
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
CMC access error after Integration Kit 3.1 FixPack 1.7
Hello all,
We face an error after the patch(Integration Kit 3.1 FixPack 1.7) application now.
When we access CMC, after a patch(Integration Kit 3.1 FixPack 1.7) application, an error occurs.
HTTP:404 error
/PartnerPlatformService/Appl/logon.do
Do you know a correspondence method about this phenomenon?
In addition, please teach it about the known problem occurring with this patch.
Regards
ToruHi,
ok please do the following:
1) Stop the tomcat
2) Go to <BOBJ installation directory>\Tomcat55\webapps (For Unix: <BOBJ installation directory>\bobje\tomcat\webapps) and remove the following directories:
CmcApp
CmcAppActions
InfoViewApp
InfoViewAppActions
dswsbobje
OpenDocument
PartnerPlatformService
SAP
3) Restart the tomcat and wait until the directories you removed are created again (Tomcat does this automatically)
Try after this to log into the CCM/InfoView
Regards,
Stratos
Maybe you are looking for
-
25.6GB of Stored Messages on a 16G iPhone5? How do I delete?
For the love of GOD someone PLEASE help me!!! I have an iPhone5/16g. It has become increasingly slow and the battery is burning through quicker than ever. I normally delete my text messages as they come in (Im a bit OCD about having a clear text scre
-
Mac: Web Flash gallery crashing
I'm only a week into this program and have run into a problem. If I select a few JPEGS and attempt to make a Flash Web gallery inevitaby LR will crash. The Flash plugin is current, Quicktime is not selected as a Flash player, the usual suspects. It's
-
SSL port is enabled, so why can't I connect through HTTPS?
Hi, I'm using Weblogic 9.2.2, Solaris 9 with Java 1.5 We have our created our managed server within a cluster, and although we have enabled the SSL listen port ... http://screencast.com/t/t5UN6Exwp when I try connecting to our app through HTTPS in a
-
Very Initial results PPBM8 (CC 2014) with GTX 970 SC
Well this has been an interesting evening with my new EVGA GTX 970 SC with 4 GB. I got over $50 off on an open box unit so I could not resist! My single GPU benchmark from PPBM using MPEG2-DVD with Hardware Acceleration scores have been the same as
-
CF9 and Ext JS - has anyone applied a different theme?
Has anyone had any luck applying Ext JS themes to override the built-in theme that ships with CF 9? If so, which theme did you apply, where did you get it, and what was your method? My guess is that i can put any Ext JS 3.0 theme into my web site and