Escam is not listed in the camera brands. Any ideas? Also..

Hello!
Im using 3 Escam QD520 IP cameras currently.
They are running fine on my windows 7 computer on iSpy and on Escam's included software.
The issue is, I cannot get them to show video on Adobe Flash Media Live Encoder.
The Escam brand is not listed under "Camera Brand" in the device>settings
Is there a similar brand I can select from Device Settings that would allow my cameras to show up?
Also how would i view all 3 cameras in AFMLE?
Ideally i am wanting to stream these cameras on a company's website. They assured me all i had to do was get my cameras to show up on AFMLE and they could do they rest (im guessing they have a host server already).
Thank you

iTunes forum here:
http://discussions.apple.com/category.jspa?categoryID=153

Similar Messages

Nikon P7700 not listed in the camera profile directory

Why is the Nikon P7700 not listed in the camera profile dirctory of Lightroom 4.2, and not selectable in calibration menu?

Just to clarify again, what has already been stated. There IS a calibration profile for your camera. The name of that profile is Adobe Standard. The only profiles that display are profiles for the specific model that took the picture. Every camera that Adobe supports, even the digital SLR cameras, has an Adobe Standard profile. That is the "standard" profile that Adobe created for the camera. A camera will either be supported and have at least a profile with that name, or it will not be supported at all.
Asking when the other profiles will be provided is futile. I can only guess, but the answer will probably be, never. If you want to create additional profiles you can download the DNG Profile Creator and create your own. But I suspect you are getting all that you're going to get from Adobe. I have a Fuji camera, an older one, and I have three Adobe Standard profiles for it. Two of them are designated with numbers corresponding to older versions of ACR/Lightroom.

My MBP will not lot start up. It chimes on but will not load up the OS. Any Ideas on how to reboot, btw i do not have the OS Disc.

My MBP will not lot start up. It chimes on but will not load up the OS. Any Ideas on how to reboot, btw i do not have the OS Disc.

The System DVDs that originally came w/your MBP has the troubleshooting tools. Suggest that you find them.
Do you have any 3rd party utility DVDs? If so, they may work. DW would be your best choice. Does wonders.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

My phone's speakers only work sometimes. Sometimes it is better when I plug in my headphones, but not all of the time. Any idea's?

My phone's speakers only work sometimes. It started recently, and I just moved to Hawaii so I am at the beach alot. Could sand have something to do with this? Sometimes it is better when I plug in my headphones, but not all of the time. Any idea's?

cmhatch93 wrote:
I just moved to Hawaii so I am at the beach alot. Could sand have something to do with this?
Absolutely!
If you are taking your $500 electronic device to the beach, I recommend you get a case that completely seals the iPhone from the elements (ie. waterproof).
-> http://reviews.cnet.com/8301-19512_7-57587098-233/top-waterproof-iphone-5-and-ip hone-4-4s-cases/

Using iWeb when I drag across a google maps widget I get the box but no map. It is as though I am not attached to the internet. Any ideas?

Using iWeb when I drag across a google maps widget I get the box but no map. It is as though I am not attached to the internet. Any ideas?

Often discussed in this forum since MobileMe closed.
Search this forum for "google maps".
Or go to Google Maps.
Find your spot on the globe.
Grab the code (chain icon).
Add a HTML snippet to your page.
Paste the code.
Result :
http://www.wyodor.net/mfi/cultureclub/Maps.html
Or try the competition :
http://www.wyodor.net/mfi/cultureclub/BingMaps.html

No luck importing from SonyHandycam DCR-DVD650? I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera. Any ideas what the issue could be?

I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?

http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try

I can get on the internet with my laptop using my wireless network at home but I can not get on the internet using my ipad. The wi-fi setting show a connection on my ipad but I can not pull up the internet. Any ideas?

My laptop connects to the internet via my wireless network at home. My ipad will not bring up the internet using the same connection. It shows in the wi-fi settings as connected but when I bring up safari, nothing comes up. Any ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

We have two Airprint capable printers thagt my wife uses with her Samsung Galaxy s4 but both printers are NOT listed on my iPhone 4s. any ideas why and how to correct??

I have two printers ... Cannon MS5400 and an Epson Workforce 840 ... both are Airprint capable as my wife prints to both via her Samsung Galaxy S4.
My iPhone 4S only has the Cannon listed when I go to print. Any deas as to what is going on and how to correct???

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Unable to connect to Hospital system. The system redirects to an agreement page but ny computer just says I am not connected to the internet. Any ideas?

I am a regular patient at a local hospital that provides free internet access to patients AFTER they accept terms and conditions. I have had no problems until recently when instead of redirecting to the systems acceptance page, I started getting a message that I was not conected to thye internet.
This began about 4 weeks ago and continues. I do not have redirect blocked and have tried Safari, Firefox and Google Chrome to no avail. Please give me some ideas.
Thanks,
Jim

Contact the hospital IT staff and ask them if they are using ActiveX. If they are, that's not 100% accessible and against section 508 accessibility guidelines. They should use http://www.anybrowser.org/ as a guide for a platform agnostic website.

I just switched from a PC and am installing googlemail on my macbook. it has successfully connected my calendar and contacts. But my mail is not linking. i get a unable to connect to the server message. any ideas wise ones pls

i have just switched from a PC and installing my googlemail account onto my Macbook pro. I can successfully see my calendar and contacts but my mail will not connect. i get an error message - can not connect to the server. Any ideas please?

Neil,
I don't use Apple's Mail client (I use MS Outlook) but setting up your Gmail account should be fairly straightforward. Just make certain that you have your settings correct.
For your incoming server, be sure to use the "map.gmail.com" server, using SSL, using port "993" (usually the default).
For your outgoing server, be sure to use the "smtp.gmail.com" server, override the default port and use port "465" and use SSL to connect and make sure that you enter your email address and password to access the SMTP server.
If you've already set up your account with these settings, you may need to Google "gmail setup apple mail" and find the Google document relating to same.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Lenses not listed in the Lens Optimizer in Digital Photo Professional

As the topic title states my lenses are not listed in the Digital Lens Optimizer. I've placed the CD in the tray, and yet the program says it's connecting to the server, and when done, they are not found in the list. The lenses are:
EF-S 18-55mm f/3.5-5.6 IS II
EF-S 55-250mm f/4-5.6 IS II
Why are they not listed? How do I get them?
DPP version 3.13.0.1
EOS 70D / EOS Rebel t4i / EF-S 18-55mm f3.5-5.6 IS II / EF-S 55-250mm f4-5.6 IS II / Sigma 17-50 f2.8/ Canon EF-S 60mm f2.8 macro/ Canon EF 100mm f2.8 macro/ Tamron 70-300mm / 430EX II Speedlite / Canon FS 300
Canon Pixma MG 3100 / Canon LiDE 2100
Adobe Lightroom 4, Canon DPP, Corel Paintshop Pro X4

Of the lenses I have, the following are not supported by DPP 4 (However, they are supported "in camera" with EOS Utility 3)
Canon EF 50mm f/1.8 II USM
Canon EF 20-35mm f/3.5-4.5 USM
Canon EF 24-85mm f/3.5-4.5 USM
Canon EF 28-90mm f/4-5.6 USM
Canon EF 28-105mm f/3.5-4.5 II USM
Canon EF 28-135mm f/3.5-5.6 IS USM
Canon EF 75-300mm f4.5-5.6 USM
I don't care if they are "old" lenses or not. Why have the correction profiles for "in camera" correction (when saving/converting to JPG) and not in DPP 4? They have the data, they could just port it over from the database used in EOS Utility 3.
These lens correction profiles bring new life to some of the old "film" lenses like the Canon EF 20-35mm f/3.5-4.5 USM lens. That lens has lots of distortion. However with in camera correction, it now produces good pictures.
I am not a professional photographer. I am a photography enthuisasts. I'll NEVER spend $1,000.00 or more for an "L" series lens (in fact I sold the Canon 24-105 f/4 L "kit lens that came with my EOS 5D. It was way too heavy, and the zoom on the low end was cramped (only 4mm movement between 24mm and 28mm). I like/use my Canon EF 28-105mm f/3.5-4.5 II USM and Canon EF 28-135mm f/3.5-5.6 IS USM better.
Maybe my mistake is that I am using a program call Digital Photo Professional and I am not a professional. I noticed that that software leans heavily and supports the "L" series lenses.

Panasonic GH4 is not listed in the "Lens correction Profile"

Hi there,
I am using Panasonic GH4 and GX7.
And according to my Lightroom 5, it is already the latest version but under the lens crorection profile. I cannot even find the word PANASONIC in the dropdown menu for cameras.
Any ideas and tips ?
Thank you

whsprague wrote:
I won't say that I understand this, but on 99jon's linked page there is "fine print" that says, "For Panasonic and Olympus cameras, automatic lens profile correction is supported on all raw files from Micro Four Thirds cameras."
(The statement is the last bullet point in the Tips section above the lens list.)
Yes, this is what I don't understand too.
While the fine-print says it supported Panasonic micro 4/3 cameras but Panasonic is not in the list of cameras that 99jon posted ...
Any ideas ?
Thanks

Illustrator CS6 is not listed in the Programs panel.

Hi, my Illustrator CS6 is not listed in the Programs panel in the Extensions Manager. How do I restore it?
A bit of history:
I had been using ScriptBay with Illustrator CS6 before, without problems. After my someone came and resolve some of my computer's network permissions issues, I discovered that ScriptBay panel has stopped working normally.
However, the script still works fine in Indesign CS6
I tried deleting some preferences, but scriptBay refused to work in Illustrator. Then, I copied a colleague's Illustrator CS6 to test on my machine (without deleting my copy). And now, my extension manager does not list Illustrator ib the panels.
Can anyone help with these 2 issues? I wanted the ScriptBay to work so badly!!
Thanks!
Elle

Thanks for your sugegstion. Gonna repost this in another forum. I have found the solution to the "missing program": https://forums.adobe.com/message/4622944
I can't do a clean install; it's not my personal computer. Hopefully I'll get a solution in the AI community!
Thanks!

Media Encoder CC not listed in the list of app in CC

I'm running Windows 7 Ultimate and I am a Adobe Creative Cloud for Teams member. I'm trying to install the new version of Media Encoder, but when i open Creative Cloud app it is not listed in the long list of apps. I have CS6 and CC installed on my computer.
Can you offer some suggestion how i can download and install this program?
I am trying to convert a mov file to webm and i am hoping Media Encoder CC can do that since I did not see a webM choice in media encoder cs6.
Thanks.

Brenadan Bolles (fnordware) has recently posted some beta versions of WebM exporters for Adobe Media Encoder. Details are here:
http://forums.adobe.com/message/5463405#5463405

Where is the photo tab on itunes? My device is not listed on the left side of my screen and there is no photos tab on the right of my screen. I want to delete photo albums that were synced through itunes to my ipad 3.

I synced several photo albums to my iPad 3 from my computer through iTunes. Now, I would like to remove them and have discovered that they cannot be removed except through using iTunes. Instructions that I've read say that once the device is connected to and selected from the list in iTunes, select the Photo Tab and then the folder that contains the photos etc. I never get that far because I do not have a Photo Tab to select in iTunes. How do I find this illusive tab so that I can delete these albums that are merely duplications of other pictures and are just occupying space. I need to get rid of them. Can anyone help me find the photo tab. I cannot move past that step until I do. Also, my device is not listed on the left side as stated in the instructions. It's in the bar on the upper right area of my screen and is automatically selected when connected. I am using the current version 11.1 for iTunes and IOS 7 on my iPad 3, if that helps.

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Escam is not listed in the camera brands. Any ideas? Also..

Similar Messages

Maybe you are looking for