Escaped characters & in LSO Test player after LSO 600 upgrade
Hi All,
We were told that we wouldn't have top touch courses or tests after the LSO 300-600 upgrade. We have found special chars like & showing up as & in test questions. Has anyone else seen this? We submitted a message but got no satisfaction from SAP. Apparently we have to touch 1000s of courses. Many languages. Help!!!
Thanks,
Doug
MacKeeper – Do Not Install
MacKeeper – Do Not Install (2) See SDW2001’s post
MacKeeper Removal
MacKeeper Removal
Similar Messages
-
Hi,
Is it possible to change the text of a button which is in the LSO Test Player application?
We would like to amend the text for the finish test cmd button.
If this is not the best forum for this, please can you suggest where would be more appropriate.
Regards,
RobHI, Niladri.
If It was in authoring environment during testing WBT local, it would be 4),5) relevant for you.
1) Check config of your LSOCP <j2ee-server>:<part>/lms/checkconfig?sys=<backendsys>&client=<client>
2) See configuration http://<J2EE-server>:<port>/lms/mediator/config
3) Check tech users(LSO_CP, CMS_User) roles and acess in backendsys
3) Also check RFC SAP_LSO_BACKEND
4) Downgrade Java\reinstall
5) Use another version of LSOAE
This note may be halpful 746917
Also see instalation guide
Regards,
Alexey. -
LSO AE test player does't work
Hi colleagues,
We are using LSO AE for create tests when get test preview local, I see, Loading the Test Player... ................ and nothing happens. Test player doesn't load. I try to use another version of LSO AE and java but, has not achieved any results.
By my opinion it is a Java, but i don't know how it' can be solve?HI, Niladri.
If It was in authoring environment during testing WBT local, it would be 4),5) relevant for you.
1) Check config of your LSOCP <j2ee-server>:<part>/lms/checkconfig?sys=<backendsys>&client=<client>
2) See configuration http://<J2EE-server>:<port>/lms/mediator/config
3) Check tech users(LSO_CP, CMS_User) roles and acess in backendsys
3) Also check RFC SAP_LSO_BACKEND
4) Downgrade Java\reinstall
5) Use another version of LSOAE
This note may be halpful 746917
Also see instalation guide
Regards,
Alexey. -
Is LSO content player on an independent server?
We try to install/configure LSO. When it comes to the content player, we are not sure whether it is an add-on to ERP or EP.
Would you please explain ? Thanks!Hi,
The Content Player (LSOCP), is based on a Java Platform, so you have to install it and configure in your SAP J2EE Engine.
Depending on your ERP version (i suppose 6.0.X), you have to install the corresponding version;
- LSOCP 600 (no EHPs)
- LSOCP 602 (With EHP2)
- LSOCP 604 (With EHP4)
Follow this thread to solve some issues after installation:
Unable to play content in LSO Content Player.
Regards! -
LSO content player Button Label
Hi,
In LSO content player, I would like to customize the button label " End Test".
I have gone through the jsp and html pages and did not find any reference to it.
Please suggest.
Thanks,
Vasudha ReddyDid you check in the following XML file?
jspstrings_en.xml file : You can find it in the J2EE 630 under the following path: \server0\apps\sap.com\com.sap.hcm.ls.webapps\servlet_jsp\lms\WEB-INF\xml
Please let me know if this helps. -
LSO offline player configuration
hi team,
Could someone shed some light on LSO offline player post installation configuration. The standard installation guide doesn't talk anything about the offline player configuration.
As per my knowledge, the offline player installed on the local PC directly connects to Content Player through http session, so is there anything that we need to mention like Content player URL in the offline player. so that it will directly interact with Content player everytime.
i believe there are won't be any functional changes in the backend right, on the LSOFE. please explain.
-durgaHi,
Where as i know there is no functional change required for this other than normal configuration for LSO.
Need to provide credential whenever you want to connect to backend system .
Regards, -
How to install the OffLine Player for LSO
Hi ,
I looking for a documentation in order to install the OffLine Player for LSO , and also if the Learner Portal will propose the install on every PC ussing the Learner Portal ?
Thank you .Yes, there is a document in Service Marketplace which discusses this. I am only familiar with LSO 300.
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000107422007E
I don't recall if it is on the standard course details page or not (we have done a lot of customization to our Learning Portal), but we have a separate section on our course type details page which reads as follows:
Download Course
You can play this course offline if you want, for example, on a laptop. To do so, you must download the content files to your computer. Please note the following:
- The actual download and subsequent display is done with the help of the Offline Player, which must be installed on your PC. Install Offline Player
- When you switch back to online playing, you can synchronize the progress you made offline with the data in the Learning Portal.
Download Course
Please note that there is a requirement to have the Java SDK loaded on the computer in order to deploy the Offline Player. This is big hassle to incorporate into the installation process, but we had our IT group create a batch program to 1st install the Java SDK, followed by installation of the Off-line player. -
How to replace escape characters in a string ?
Hi All,
In my application I came across a problem where I want to replace a substring (contains escape characters also) with another string. The below shown code will replicate my problem :
public class StringSearchAndReplace {
public static void main(String args[]) {
String stmt = " \\pntext\\bullet\\tab The question as to ";
String newStmt = stmt.replaceAll("\\bullet\\tab", "B");
System.out.println("BEFORE: " + stmt + "\n");
System.out.println("AFTER: " + newStmt);
}Here I want to replace "\\bullet\\tab" with "B". I am unable to move further. Please help/suggest me in this regard.
Its urgent.
Thanks in advance.Satyaprasad_Mylavarapu wrote:
Hi All,
In my application I came across a problem where I want to replace a substring (contains escape characters also) with another string. The below shown code will replicate my problem :
public class StringSearchAndReplace {
public static void main(String args[]) {
String stmt = " \\pntext\\bullet\\tab The question as to ";
String newStmt = stmt.replaceAll("\\bullet\\tab", "B");
System.out.println("BEFORE: " + stmt + "\n");
System.out.println("AFTER: " + newStmt);
}Here I want to replace "\\bullet\\tab" with "B". I am unable to move further. Please help/suggest me in this regard.
Its urgent.
Thanks in advance.If the String you're trying to replace contains a slash you need four slashes (double it for java, then again because String.replaceAll takes a regular expression)
So I think what you're looking for is:
String newStmt = stmt.replaceAll("\\\\bullet\\\\tab", "B");I haven't tested that though. -
my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
How can I use escaped-characters in an option
I have the following code that is used to retrieve city-names including parent-child relations from a database and place them in an array:
<%@ page contentType="application/x-javascript" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
<sql:setDataSource dataSource="jdbc/KADOS" var="Raak" scope="session" />
<sql:query var="bewaringSQL" dataSource="${Raak}">
SELECT bewaringcode, vestigingsplaats FROM BEWARING order by vestigingsplaats
</sql:query>
bewaringen = new Array(
<c:forEach items="${bewaringSQL.rows}" var="plaats" varStatus="s" >
new Array( "<c:out value="${plaats.BEWARINGCODE}" />",
"<c:out value="${plaats.VESTIGINGSPLAATS}" />" )
<c:if test="${not s.last}">,</c:if>
</c:forEach>
i=0;
<c:forEach items="${bewaringSQL.rows}" var="plaats" varStatus="s" >
<sql:query var="bewaringGemSQL" dataSource="${Raak}" sql="SELECT KADGEMCODE, KGMNAAM FROM KADGEMEENTE where BEWARINGCODE=? order by KGMNAAM">
<sql:param value="${plaats.BEWARINGCODE}" />
</sql:query>
tmp = new Array(
<c:forEach items="${bewaringGemSQL.rows}" var="gem" varStatus="s" >
new Array( "<c:out value="${gem.KGMNAAM}" />",
"<c:out value="${gem.KADGEMCODE}" />" )
<c:if test="${not s.last}">,</c:if>
</c:forEach>
bewaringen[2] = tmp;
i = i+1;
</c:forEach>
function bewaringenList(selectCtrl, itemArray) {
for (i=0; i<itemArray.length; i++) {
selectCtrl.options[i] = new Option(itemArray[i][1]);
selectCtrl.options[i].value = itemArray[i][0];
function setList(selectCtrl, itemArray) {
for (i=selectCtrl.options.length; i>=0; i--) {
selectCtrl.options[i] = null;
for (i=0; i<itemArray.length; i++) {
optie = filter(itemArray[i][0]);
selectCtrl.options[i] = new Option(optie);
selectCtrl.options[i].value = itemArray[i][1];
function filter( invoer) {
retour = invoer;
retour = retour.replace("'", "\'");
return retour;
The function 'bewaringenList' populates a <SELECT> with parent-names and
"setList(document.VraagForm.gemSelect, bewaringen[this.selectedIndex][2]);" populates the depending <SELECT> with child-names.
Some names contain single quotes (like "'t Zandt") and are displayd in the select-box as "'t Zandt".
I expected that the quotes could be replaced by escape-characters by 'filter(invoer)' but this does not work.
Is there a generic way to show these characters?
BenI don't understand why but this filter solved the problem:
function filter( invoer) {
retour = invoer;
retour = retour.replace("'", "'");
return retour; -
VLD-1141, Template cannot contain escape characters.
Hi All,
I need help about mapping deployment. I am working on a mapping. I can deploy it before to 9i target location. But after upgrading target database to 10g, I get the error VLD-1141 when I deploy it. The detail is Template cannot contain escape characters.
And the full error message is as following:
VLD-1141: Internal error during mapping generation.
java.lang.IllegalArgumentException: Template cannot contain escape characters.
at oracle.wh.util.expr.WBLiteralExpression.<init>(WBLiteralExpression.java:34)
at oracle.wh.service.impl.mapping.component.transforms.GenericTransformGenerationDelegate.addContextExpressionsForGroups(GenericTransformGenerationDelegate.java:345)
at oracle.wh.service.impl.mapping.component.transforms.GenericTransformGenerationDelegate.prepareOutputContextPlSql(GenericTransformGenerationDelegate.java:1433)
at oracle.wh.service.impl.mapping.component.transforms.GenericTransformPlSqlDelegate.prepareOutputContext(GenericTransformPlSqlDelegate.java:147)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:239)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleCursorLoopInternal(PlSqlGenerationMediator.java:3206)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleCursorLoop(PlSqlGenerationMediator.java:3190)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleRowBased(PlSqlGenerationMediator.java:3115)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:538)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:770)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:316)
at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:99)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:241)There are to bugs:
Bug 5403652 - ERROR 'TEMPLATE CANNOT CONTAIN ESCAPE CHARACTERS' WHEN VALIDATING A MAPPING
Bug 5561224 - MIGRATION OF MAPPING REQUIRES CHANGE IN CONFIG TO ALLOW VALIDATION
against OWB 10.2.0.1
but these bugs are fixed from 10.2.0.2
The bug is related to pre/post mapping operators...
If you are on 10.2.0.3 or your mapping does not have these operators then have no clue... -
Bug in replace all. escape characters are not working.
Hi,
My requirement is that whenever i see ":" (Colon) in the string then i want to replace it with (\:). So i tried
String escapedTitle = "title:the world is not enough".replace(":", "\\:")
and to my surprise, when i printed escapedTitle i got
title\\:the world is not enough
instead of
title\:the world is not enough
(note the back slash in the string)
I want to ask why there is a different beehavious of escape characters? I am using JDK1.6.0_06Sorry for the last post. Please try this:
public class test
public static void main(String a[])
String escapedTitle = "title:the world is not enough".replaceAll(":+", "\\:"); //or [:]+
String escapedTitle1 = "title:the world is not enough".replaceAll(":+", "*"); // or [:]+
System.out.println("Another String is "+ escapedTitle);
System.out.println("Another String is "+ escapedTitle1);
System.out.println(System.getProperty("java.vendor"));
System.out.println(System.getProperty("java.version"));
output is
Another String is title:the world is not enough
Another String is titlethe* world is not enough
Sun Microsystems Inc.
1.6.0_06
Please let me know why i am not getting : as escaped (\:) with replaceAll method.
i want string escapedTitle as Another String is title*\:*the world is not enough -
Template cannot contain escape characters
I created a database function which takes a varchar2 variable as input and passes back a number as output.
I am using pre mapping process to call this function and I created a constant with the value I want to pass to this function. When I try to validate my mapping I am getting this error
Template cannot contain escape characters.
Why am i gettign this error any ideas as to how to fix this. I know for sure the join of the constant to the input mapping process is causing this error but my constant variable just has
'xxxxx_xxxx' no other characters.
ThanksHi
Are you using the 10.2.0.1 production release, I think this is bug 5403652. It should be fixed in a patch after (10.2.0.2 onwards), you could also try set based only code generation and see if this bypasses the problem (there is a comment in the bug indicating it is a row based code gen bug).
Cheers
David -
Dealing with escape characters
I have a command that works if I represent it as "\003"+command+"\r" because my command needs to be preceded by the char 'x03' and tailed by the char 'x0d'. The literals "\003" and "\r" are being converted as I wish into their equivalent byte values.
If I use Java string variables 'start' and 'end' to hold the values "\003" and "\r" and I issue my command as 'start+command+end', the start and end values are NOT converted into byte values. They remain represented as they are written i.e my string command is preceded by '\003' and ends with '\r'.
How can I convert escape characters stored in string variable into their byte equivalents?
DavidPlease show us the code, because what you say isn't clear. If the Strings are written as
String start = "\003"; // etx
String end = "\r"; //crIt should work.
Often this sort of thing is easier to do with character variable. eg.
char start = 3; // etx
char end = 13; // crI also wonder why you are using etx (end of text) as the start of text, the usual choice would be stx=\002. Also, none of this has anything to do with "byte" values, they are characters and take 2 bytes each. Your network code can do that conversion for you after you choose your character set. Is it UTF8, Latin-1, or some other. -
Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4
I have a group of 6 unit tests failing after upgrading to the new Kodo
4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
exceptions like the one at the bottom of this email. It seems to be an
interaction with the PostgreSQL driver, though I can't be sure. I
haven't changed my JDO configuration or the related classes in months
since I've been focusing on using the objects that have already been
defined. The .jdo, .jdoquery, and .java code are below the exception,
just in case there's something wrong in there. Does anyone have advice
as to how I might debug this?
Thanks,
Mark
Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
Testcase:
testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
Caused an ERROR
The column index is out of range: 2, number of columns: 1.
<2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
range: 2, number of columns: 1.
at
kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
at
kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
at
edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
NestedThrowablesStackTrace:
org.postgresql.util.PSQLException: The column index is out of range: 2,
number of columns: 1.
at
org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
at
org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
257)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
at kodo.jdbc.sql.Union.execute(Union.java:326)
at kodo.jdbc.sql.Union.execute(Union.java:313)
at
kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
--- DefaultUser.java -------------------------------------------------
public class DefaultUser
implements User
/** The account username. */
private String username;
/** The account password. */
private String password;
/** A flag indicating whether or not the account is enabled. */
private boolean enabled;
/** The authorities granted to this account. */
private Set<Authority> authorities;
/** Information about the user, including their name and text that
describes them. */
private UserInfo userInfo;
/** The set of organizations where this user works. */
private Set<Organization> organizations;
--- DefaultUser.jdo --------------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<sequence name="user_id_seq"
factory-class="native(Sequence=user_id_seq)"/>
<class name="DefaultUser" detachable="true"
table="whisper_user" identity-type="datastore">
<datastore-identity sequence="user_id_seq" column="userId"/>
<field name="username">
<column name="username" length="80" jdbc-type="VARCHAR" />
</field>
<field name="password">
<column name="password" length="40" jdbc-type="CHAR" />
</field>
<field name="enabled">
<column name="enabled" />
</field>
<field name="userInfo" persistence-modifier="persistent"
default-fetch-group="true" dependent="true">
<extension vendor-name="jpox"
key="implementation-classes"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
<extension vendor-name="kodo"
key="type"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
</field>
<field name="authorities" persistence-modifier="persistent"
table="user_authorities"
default-fetch-group="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultAuthority" />
<join column="userId" delete-action="cascade"/>
<element column="authorityId" delete-action="cascade"/>
</field>
<field name="organizations" persistence-modifier="persistent"
table="user_organizations" mapped-by="user"
default-fetch-group="true" dependent="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultOrganization"
dependent-element="true"/>
<join column="userId"/>
<!--<element column="organizationId"/>-->
</field>
</class>
</package>
</jdo>
--- DefaultUser.jdoquery ---------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<class name="DefaultUser">
<query name="UserByUsername"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
WHERE username==searchName
PARAMETERS java.lang.String searchName
]]></query>
<query name="DisabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==false
]]></query>
<query name="EnabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==true
]]></query>
<query name="CountUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
]]></query>
</class>
</package>
</jdo>I'm sorry, I have no idea. I suggest sending a test case that
reproduces the problem to support.
Maybe you are looking for
-
How do I change airport extreme's network drive permissions?
Hello. I want all Macs (3) in my house to have read/write access to the network drive connected via Airport Extreme. Why is this difficult? Here are my current settings: Here's what I want to change: What gives?
-
Can some one please help me with this?
-
So I just picked up an Mac Mini 1.66ghz Intel Core Duo and Logic 7.2 when installing third party plugins , they are not even showing in the audio units manager , i would rather have them fail so at least they are recognized in the program ... cause t
-
Sony: Lens Profile Creator knows the subject distance, ACR does not
When making a lens profile for a Sony alpha DSLR, lens profile creator identifies the focus distance, and processes each distance accordingly. However, when loaded in ACR (or PS lens correction filter), the software does not display the distance. Why
-
How do I install Spry 1.6.1 into Dreamweaver CS3?
What directories do I install/copy and paste into? What do I do to get the wigets to show up on the toolbar in Dreamweaver? This should be pretty straight forward right?