ESH 7.2 SSO Configuration failes

Hi,
I tried SSO Configuration for ESH 7.2 as described in document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00007511-5c0e-2d10-26bd-f30b7f433b9a?quicklink=index&overridelayout=true.
It was not able to me to call the custom service created
under /default_host/zes/... Therefore I had to copy this node
to /default_host/sap/zes/...
After calling
http://nwbs1db.intra.net.blanco:50100/sap/zes/opensearch/search the
redirect application will be called. SSO Ticket is issued but internal
service of ESH abap stack calls redirect application again. Due to this
fact I get an infinite loop.
Has anybody an idea where I should check my configuration again to solve this problem?
Thanks and best regards,
Matthias

Hi Matthias,
I will notify the responsible colleagues about your post.
But can you log this as a support message to SAP as well, please?
After all, that is still the only way to get guaranteed atention by SAP (as opposed to community here) and also it is the way to get this into our official list of things to check and, if necessary, fix.
Best,
Karsten

Similar Messages

  • Managed System Configuration: SSO setup failed for Solution Manager 7.1 sp11

    Hi Folks,
    While doing Managed System Configuration for Soman system i am getting error in SSO Setup
    Currently I am in
    8. Configure Automatically :Single Sign On Setup
    This is i am going for managed System (Solution Manager System Itself)
    Below is error log..
    SSO setup failed : a problem occured while attempting to add login modules for ticket authentication
    Screen shot attached.
    Found SID for SSO ACL entry : SMP
    Found login.ticket_client for SSO ACL entry : 000
    The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tc~webadministrator~solmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
    The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
    The SSO ticket Certificate <OU=J2EE,CN=SMP> has been successfully imported into ticket Keystore
    SSO setup failed : a problem occured while attempting to add login modules for ticket authentication
    SSO setup failed : error while updating login modules : Caller not authorized.; nested exception is:
    java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
    at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    The SSO ticket Certificate <CN=SMP> has been successfully imported into ticket Keystore
    SSO setup failed : a problem occured while attempting to add login modules for ticket authentication
    SSO setup failed : error while updating login modules : Caller not authorized.; nested exception is:
    java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
    at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Exception
    java.rmi.RemoteException: Caller not authorized.; nested exception is:
    java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
    at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:160)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
    at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
    at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
    at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
    at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    at com.sap.engine.services.security.exceptions.BaseSecurityException.writeReplace(BaseSecurityException.java:349)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:331)
    at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:910)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1024)
    at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1344)
    at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1316)
    at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1260)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1065)
    at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:282)
    at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:147)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:338)
    ... 8 more
    Regards,
    San

    Hi Sandeep,
    It seems authorization issue. Please check the below SAP Note :
    1988642 - Warning 'caller not authorized' in Step 'Single Sign On Setup'
    Hope this helps.
    Thanks & Regards,
    Nisha

  • SSO Configuration Assistant failed during installation of OCS 10G on linux

    I am trying to install OCS 10g infrastructure on CentOS 4.2
    the linux version which the installer displays is redhat-4
    The installation works fine but the SSO CA fails and gives this message
    NLS_LANG param = AMERICAN_AMERICA.AL32UTF8ERROR : Exception while configing SSO DAD :oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
         at oracle.ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
         at oracle.ons.ONS.addSubscriber(ONS.java:336)
         at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
         at oracle.ons.Subscriber.<init>(Subscriber.java:80)
         at oracle.ons.ONS.createNewSubscriber(ONS.java:690)
         at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
         at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
         at oracle.webdb.config.smi.GeneralConfig.<init>(Unknown Source)
         at oracle.webdb.config.smi.GeneralDADConfig.<init>(Unknown Source)
         at oracle.webdb.config.smi.DADConfig904Imp.<init>(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getGeneralDADConfig(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getDADConfig904(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
         at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1493)
         at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
         at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
    Please fix the error reported in the stack trace above and re-run SSO Config Tool.
    /home/oracle/product/10.1.2/ocs_1/jdk/bin/java
    -cp
    /home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
    -DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
    oracle.sysman.emSDK.conf.TargetInstaller
    deletetarget
    oracle_sso_server
    infra_inst.nufastserver.local.nu_Single Sign-On:orassogetASTargetInfo: oracleHome = "/home/oracle/product/10.1.2/ocs_1".
    getASTargetInfo: iasName = "infra_inst.nufastserver.local.nu".
    getASTargetInfo: iAS Target Type = "oracle_ias".
    Setting the AS product version value in targets.xml to be "10.1.2.0.2".
    Calling method getASTargetInfo.getASTargetInfo: StatusURL value = "http://nufastserver.local.nu:7777".
    Retrieved SSO protocol, host, and port info from targets.xml.
    The values are: "http://nufastserver.local.nu:7777".The following values will be used to configure the sso_server target entry in targets.xml.
    Protocol: "http".
    Hostname: "nufastserver.local.nu".
    Port: "7777"./home/oracle/product/10.1.2/ocs_1/jdk/bin/java
    -cp
    /home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
    -DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
    oracle.sysman.emSDK.conf.TargetInstaller
    addtarget
    /home/oracle/product/10.1.2/ocs_1/sso/sso_server_target2add.xmlConfiguring SSO languages with the following language code:
    us Language us is already installed.
    About to execute java call using emConfigInstall.jar.
    Here are the arguments:
    /home/oracle/product/10.1.2/ocs_1/jdk/bin/java
    -DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
    -jar
    /home/oracle/product/10.1.2/ocs_1/jlib/emConfigInstall.jar
    consolesn
    /home/oracle/product/10.1.2/ocs_1/sso/conf/consoleConfigSNSegment.xml
    Finished executing the call.Child Process has exited.
    SSO Configuration Assistant failed.
    I have checked thelog files but there is nothing in that.
    in the hosts file I have given fully qualiifed name as "nufastserver.local.nu"
    Can any bosy help me in this problem. I have tried reinstalling the OS also but the problem is still there at the same place

    I had exactly the same poblem on a red hat 64bit OS on the infrastructure install.
    But while trying to start opmn manually (that is definitely not to do to solve the problem). I had the error telling me that the shared library libdb.so.2 was not accessible.
    I did add the compat-db-4xxxxx.i386.rpm and then retry the check. Then all passed threw.
    To note that the .log file from the install says definitely nothing about this and that just trying to start the opmn did create another .log that gave me the file problem.
    Hope it can help for 64bit linux OS installation.

  • Sso configuration assistant failed

    my envirament is redhat AS4 + oracle 10.1.0.4.2
    MR and OID are installed in different PC. There is no problem when I install the MR,but the "sso configuration assistant failed " alway appear when I install OID.
    the installation log is as fllow:
    Configuration assistant "Single Sign-On Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Single Sign-On Configuration Assistant" (attempt 4):
    CLASSPATH=/home/oracle/OraHome_1/jlib/repository.jar:/home/oracle/OraHome_1/sso/lib/ossoca.jar:/home/oracle/OraHome_1/lib/xmlparserv2.jar:/home/oracle/OraHome_1/jdbc/lib/classes12.jar:/home/oracle/OraHome_1/jdbc/lib/nls_charset12.jar:/home/oracle/OraHome_1/jlib/jndi.jar:/home/oracle/OraHome_1/jlib/ojmisc.jar:/home/oracle/OraHome_1/j2ee/home/jazn.jar:/home/oracle/OraHome_1/j2ee/home/jaas.jar:/home/oracle/OraHome_1/jdk/lib/rt.jar:/home/oracle/OraHome_1/jdk/lib/i18n.jar:.:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/OraHome_1/dcm/lib/dcm.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/portalSMI.jar:/home/oracle/OraHome_1/jlib/emConfigInstall.jar:/home/oracle/OraHome_1/lib/dms.jar:/home/oracle/OraHome_1/opmn/lib/ons.jar:/home/oracle/OraHome_1/j2ee/home/oc4j.jar:/home/oracle/OraHome_1/jlib/ojmisc.jar:/home/oracle/OraHome_1/j2ee/home/jaznplugin.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/click-agent.jar:/home/oracle/OraHome_1/sso/conf:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/disco_dsc_smi.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/f90em.jarParameters passed to ssoca : param0:config param1:/home/oracle/OraHome_1 param2:cn=orcladmin param3:***** param4:"AMERICAN_AMERICA.WE8ISO8859P1" param5:http param6:localhost.localdomain param7:7777 param8:en
    Wed Aug 11 19:50:56 PDT 2010
    Parameters received by ssoca : param0:config param1:/home/oracle/OraHome_1 param2:cn=orcladmin param3:***** param4:"AMERICAN_AMERICA.WE8ISO8859P1" param5:http param6:localhost.localdomain param7:7777 param8:en Content of ssoca config file is :
    -- listing properties --
    config_sso_oid=true
    config_lang=true
    config_sso_seed=true
    config_targets_xml=true
    config_ssoupg=true
    config_dad=true
    config_em_integ=trueSSO seed is already configured in the database.ACTION by SSOConfigAssistant :
    /home/oracle/OraHome_1/bin/sqlplus [email=orasso/*****@]orasso/*****@"cn=wmz,cn=oraclecontext[email]"
    @/home/oracle/OraHome_1/sso/admin/plsql/sso/ssooidd.sql localhost.localdomain 636 "cn=orcladmin" ***** Y
    SQL*Plus: Release 10.1.0.4.2 - Production on Wed Aug 11 19:50:58 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> Connected.
    SQL> Creating OID entries for SSO
    Error code : 1
    Error message: User-Defined Exception
    LDAP error : ORA-31203: DBMS_LDAP: PL/SQL - Init Failed.
    ERROR: deleting application entry
    Error code: 1
    Error message: User-Defined Exception
    ERROR: creating SSO users and groups in OID
    PL/SQL procedure successfully completed.
    *** Refreshing WWC OID cache....***
    declare
    ERROR at line 1:
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "ORASSO.WWSEC_OID", line 1199
    ORA-06512: at "ORASSO.WWSEC_OID", line 1328
    ORA-06512: at "ORASSO.WWSEC_OID", line 2498
    ORA-06512: at "ORASSO.WWSEC_OID", line 2528
    ORA-06512: at "ORASSO.WWSEC_OID", line 1606
    ORA-06512: at "ORASSO.WWSEC_OID", line 1755
    ORA-06512: at "ORASSO.WWSEC_OID", line 2133
    ORA-06512: at line 8
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
    With the Partitioning, OLAP and Data Mining options
    NLS_LANG character set = AL32UTF8
    NLS_LANG param = AMERICAN_AMERICA.AL32UTF8/home/oracle/OraHome_1/jdk/bin/java
    -cp
    /home/oracle/OraHome_1/lib/xmlparserv2.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/OraHome_1/lib/emSDK.jar
    -DORACLE_HOME=/home/oracle/OraHome_1
    oracle.sysman.emSDK.conf.TargetInstaller
    deletetarget
    oracle_sso_server
    wmz_oid.localhost.localdomain_Single Sign-OnrassoSetting the AS product version value in targets.xml to be "10.1.2.0.2".
    Calling method getASTargetInfo.
    getASTargetInfo: oracleHome = "/home/oracle/OraHome_1".
    getASTargetInfo: iasName = "wmz_oid.localhost.localdomain".
    getASTargetInfo: iAS Target Type = "oracle_ias".getASTargetInfo: StatusURL value = "http://localhost.localdomain:7777".
    Retrieved SSO protocol, host, and port info from targets.xml.
    The values are: "http://localhost.localdomain:7777".
    The following values will be used to configure the sso_server target entry in targets.xml.
    Protocol: "http".
    Hostname: "localhost.localdomain".
    Port: "7777".
    /home/oracle/OraHome_1/jdk/bin/java
    -cp
    /home/oracle/OraHome_1/lib/xmlparserv2.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/OraHome_1/lib/emSDK.jar
    -DORACLE_HOME=/home/oracle/OraHome_1
    oracle.sysman.emSDK.conf.TargetInstaller
    addtarget
    /home/oracle/OraHome_1/sso/sso_server_target2add.xmlConfiguring SSO languages with the following language code:
    us Language us is already installed.About to execute java call using emConfigInstall.jar.
    Here are the arguments:
    /home/oracle/OraHome_1/jdk/bin/java
    -DORACLE_HOME=/home/oracle/OraHome_1
    -jar
    /home/oracle/OraHome_1/jlib/emConfigInstall.jar
    consolesn
    /home/oracle/OraHome_1/sso/conf/consoleConfigSNSegment.xml
    Finished executing the call.Child Process has exited.
    SSO Configuration Assistant failed.
    Configuration assistant "Single Sign-On Configuration Assistant" failed
    =============================
    Can someone help me?

    I had the similar issue and same error mesaage.
    One of the possible reason is the DNS and/or host file configuration.
    If the OID/SSO and metadata repository are on two different servers, make sure for both servers, the entries IP <fully qualified hostname> <Alias> reflects in host file of each of them.
    Simply click retry and the install should run to completion.
    Good Luck!

  • Policy web agent configuration failed: NSPR error Configuration Failed!!!!

    I am having troubles to install agent Apache 2.2!!!!!
    The libamapc22.so uses libstdc++.so.5....
    so i have this error:
    root@ped-02 bin# service httpd start
    Starting httpd: httpd: Syntax error on line 995 of /etc/httpd/conf/httpd.conf: Syntax error on line 1 of /opt/web_agents/apache22_agent/Agent_006/config/dsame.conf: Cannot load n/opt/web_agents/apache22_agent/lib/libamapc22.so into server: libstdc++.so.5: cannot open shared object file: No such file or directory
    In my OS is Installed the libstdc++.so.6
    if I Install the libstdc++.so.5
    I have this error:
    [Wed Aug 20 15:50:35 2008] [notice] Digest: generating secret for digest authentication ...
    [Wed Aug 20 15:50:35 2008] [notice] Digest: done
    [Wed Aug 20 15:50:35 2008] [alert] Policy web agent configuration failed: NSPR error Configuration Failed
    So I have installed NSPR and NSS but this error persists.
    In log /opt/web_agents/apache22_agent/Agent_006/logs/debug/amAgent
    ===========
    2008-08-20 16:16:36.152 Error 18271:b949c3d0 all: Connection::initialize() unable to initialize SSL libraries: NSS_Initialize returned -8128
    2008-08-20 16:16:36.156 Error 18271:b949c3d0 all: initialization error: am_properties_load(com.sun.am.policy.agents.config.stopInInit) failed, error = NSPR error (12): exiting...
    2008-08-20 16:16:36.156 Error 18271:b949c3d0 all: Process initialization failure:NSPR error
    My configuration: ---- AMAgent.properties
    com.sun.am.cookie.name = iPlanetDirectoryPro
    com.sun.am.cookie.secure = false
    com.sun.am.naming.url = http://accessmanager.coreo.network.ctbc:8080/opensso/namingservice
    com.sun.am.policy.am.login.url = http://accessmanager.coreo.network.ctbc:8080/opensso/UI/Login
    com.sun.am.policy.agents.config.local.log.file =/opt/web_agents/apache22_agent/Agent_006/logs/debug/amAgent
    com.sun.am.policy.agents.config.local.log.rotate = false
    com.sun.am.policy.agents.config.remote.log = amAuthLog.accessmanager.coreo.network.ctbc.80
    com.sun.am.log.level =
    com.sun.am.policy.am.username = amadmin
    com.sun.am.policy.am.password = fhfeUCQselvAndSuo17Pww==
    com.sun.am.sslcert.dir =
    com.sun.am.certdb.prefix =
    com.sun.am.trust_server_certs = true
    com.sun.am.notification.enable = false
    com.sun.am.notification.url=http://accessmaager.coreo.network.ctbc:80/UpdateAgentCacheServlet?shortcircuit=false
    com.sun.am.policy.am.url_comparison.case_ignore = true
    com.sun.am.policy.am.polling.interval=3
    com.sun.am.sso.polling.period=3
    com.sun.am.policy.am.userid.param=UserToken
    com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
    com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
    com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
    com.sun.am.policy.agents.config.session.attribute.map=
    com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
    com.sun.am.policy.agents.config.response.attribute.map=
    com.sun.am.load_balancer.enable = false
    com.sun.am.policy.agents.config.version=2.2
    com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
    com.sun.am.policy.agents.config.agenturi.prefix = http://accessmanager.coreo.network.ctbc:80/amagent
    com.sun.am.policy.agents.config.locale = en_US
    com.sun.am.policy.agents.config.instance.name = unused
    com.sun.am.policy.agents.config.do_sso_only = false
    com.sun.am.policy.agents.config.accessdenied.url =
    com.sun.am.policy.agents.config.fqdn.check.enable = true
    com.sun.am.policy.agents.config.fqdn.default = accessmanager.coreo.network.ctbc
    com.sun.am.policy.agents.config.fqdn.map =
    com.sun.am.policy.agents.config.cookie.reset.enable=false
    com.sun.am.policy.agents.config.cookie.reset.list=
    com.sun.am.policy.agents.config.cookie.domain.list=
    com.sun.am.policy.agents.config.anonymous_user=anonymous
    com.sun.am.policy.agents.config.anonymous_user.enable=false
    com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
    com.sun.am.policy.agents.config.notenforced_list.invert = false
    com.sun.am.policy.agents.config.notenforced_client_ip_list =
    com.sun.am.policy.agents.config.postdata.preserve.enable = false
    com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
    com.sun.am.policy.agents.config.client_ip_validation.enable = false
    com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
    com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
    com.sun.am.policy.agents.config.logout.url=
    com.sun.am.policy.agents.config.logout.cookie.reset.list =
    com.sun.am.policy.am.fetch_from_root_resource = true
    com.sun.am.policy.agents.config.get_client_host_name = true
    com.sun.am.policy.agents.config.convert_mbyte.enable = false
    com.sun.am.policy.agents.config.ignore_path_info = false
    com.sun.am.policy.agents.config.override_protocol =
    com.sun.am.policy.agents.config.override_host =
    com.sun.am.policy.agents.config.override_port =
    com.sun.am.policy.agents.config.override_notification.url =
    com.sun.am.policy.agents.config.connection_timeout =
    com.sun.am.receive_timeout = 0
    com.sun.am.connect_timeout = 0
    com.sun.am.poll_primary_server = 5
    com.sun.am.tcp_nodelay.enable = false
    com.sun.am.policy.agents.config.encode_url_special_chars.enable = false
    com.sun.am.policy.agents.config.iis.filter_priority = HIGH
    com.sun.am.policy.agents.config.cdsso.enable=false
    com.sun.am.policy.agents.config.cdcservlet.url = http://accessmanager.coreo.network.ctbc:8080/opensso/cdcservlet
    Jonathan Costa Muniz.

    Hi joncmuniz,
    Are you managed to resolve this problem? I have the same.
    In logs i have such information:
    2008-10-08 16:48:02.471   Debug 23153:84d5368 all: Connection::initialize() calling NSS_Initialize() with directory = "" and prefix = ""
    2008-10-08 16:48:02.471   Debug 23153:84d5368 all: Connection::initialize() Connection timeout wen receiving data = 0 milliseconds
    2008-10-08 16:48:02.472   Error 23153:84d5368 all: Connection::initialize() unable to initialize SSL libraries: NSS_Initialize returned -8128
    2008-10-08 16:48:02.475   Error 23153:84d5368 all: initialization error: am_properties_load(com.sun.am.policy.agents.config.stopInInit) failed, error = NSPRerror (12): exiting...
    2008-10-08 16:48:02.475   Error 23153:84d5368 all: Process initialization failure:NSPR errorI think the problem is with certificates, but i can't point where.
    Can you help?

  • Call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY , SSO Authentication fail

    Dear all:
    We have finished EP &BW configuration and also check setting with Diagnosis tool. The lights are all green. But when we tried to publish query to EP, after chosing PCD folder the query would go , an JAVA error message shown up :
    Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId <J2EE Program> on host <EP host name> with SSO not authorized: Authentication fail.
    We tried a lot of means, even issued OSS message... Still no good found
    HELP !!!
    BRs
    SZU

    Please check if the integration and sso configuration did correctly
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
    Hope it Helps
    Chetan
    @CP..

  • SSO registration fails.

    While registering the application in 10.1.2.0.2 OID, I get the following error.
    *** Log File =
    $INST_TOP/logs/appl/rgf/TXK/txkSetS
    SOReg_Thu_Apr_10_04_40_53_2008.xml
    Beginning input parameter validation for Oracle Home Instance registration.
    Input parameter validation for Oracle Home Instance registration completed.
    Beginning input parameter validation for SSO registration.
    Input parameter validation for SSO registration completed.
    Beginning input parameter validation for OID registration.
    Input parameters validation for OID registration completed.
    BEGIN ORACLE HOME INSTANCE REGISTRATION:
    Oracle Home Instance preferences stored successfully.
    Oracle Home Instance registered successfully.
    BEGIN SSO REGISTRATION:
    Beginning to register partner application.
    *** ERROR : SSO Partner application could not be registered successfully.
    End of
    FND_TOP//patch/115/bin/txkSetSSOReg.
    Tried registering instance separately, it works fine, and OID is also
    registering fine, but SSO registration fails all the time. with this error in the log file.
    Exception in thread "main" java.lang.NoSuchMethodError: oracle.i18n.text.converter.CharacterConverterOGS.getInstance(I)Loracle/sql/converter/CharacterConverters;
    at oracle.sql.converter.CharacterConverterFactoryOGS.make(CharacterConverterFactoryOGS.java:38)
    at oracle.sql.CharacterSetWithConverter.getInstance(CharacterSetWithConverter.java:81)
    at oracle.sql.CharacterSetFactoryThin.make(CharacterSetFactoryThin.java:106)
    at oracle.sql.CharacterSet.make(CharacterSet.java:432)
    at oracle.jdbc.driver.DBConversion.&lt;init&gt;(DBConversion.java:128)
    at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:737)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:228)
    at oracle.jdbc.driver.PhysicalConnection.&lt;init&gt;(PhysicalConnection.java:361)
    at oracle.jdbc.driver.T4CConnection.&lt;init&gt;(T4CConnection.java:151)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
    at java.sql.DriverManager.getConnection(DriverManager.java:525)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.security.sso.SSORegistrar.main(SSORegistrar.java:328)
    the same application registers fine in 10.1.4, and another 10.1.2.0.2 instance that we have...
    any clue why am hitting this issue ? ( db is fine, tablespaces are fine too )

    modify the first CLASSPATH in $IAS_ORACLE_HOME/sso/bin/ssoreg.sh and add '$ORACLE_HOME/jdbc/lib/orai18n.jar' after the entry for ojdbc14.jar,
    this resolved my issue above

  • Unable to view BI Publisher report with SSO configuration enabled

    Hi All,
    Can anybody let us know the configuration of the BI publisher with SSO enabled. We are unable to see any of the BI Publisher reports. without SSO configuration we have integration working perfectly fine with the OBIEE and Publisher.
    We followed the configuration steps to integrate BI Publisher with Oracle SSO. The following are the steps:
    1. deploy analytics.ear as a new application 'analyticsSOAP' in OAS
    2. protect analyticsSOAP in mod_osso.conf file under OAS
    3. change OBIEE Presentation services configuration to use analyticsSOAP/saw.dll
    4. run credstore utility to encrypt password
    5.restart xmlp server
    6.restart http server
    7.restart obiee server
    8. restart obiee presentation service
    Still we have issues when we try to accesses BI Publisher reports by clicking more Products -> BI Publisher or view reports directly on the OBIEE Dashboard
    Thanks in advance.

    configure one more virtual path which is unprotected from site minder. we had similar issue for Marketing and resolved by this virtual path.
    ref:
    http://vaandun-analytics.blogspot.com/2009/11/obi-publisher-with-empty-obi-catalog.html
    Thanks
    Sarathi

  • RAC - Oracle Grid Infrastructure configure failed

    Hi, am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
    [root@bsfrac01 grid]# sh root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    2011-02-13 00:11:55: Parsing the host name
    2011-02-13 00:11:55: Checking for super user privileges
    2011-02-13 00:11:55: User has super user privileges
    Using configuration parameter file: /u01/app/11.2/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-4123: Oracle High Availability Services has been started.
    ohasd is starting
    CRS-2672: Attempting to start 'ora.gipcd' on 'bsfrac01'
    CRS-2672: Attempting to start 'ora.mdnsd' on 'bsfrac01'
    CRS-2676: Start of 'ora.mdnsd' on 'bsfrac01' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'bsfrac01' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'bsfrac01'
    CRS-2676: Start of 'ora.gpnpd' on 'bsfrac01' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'bsfrac01'
    CRS-2676: Start of 'ora.cssdmonitor' on 'bsfrac01' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'bsfrac01'
    CRS-2672: Attempting to start 'ora.diskmon' on 'bsfrac01'
    CRS-2676: Start of 'ora.diskmon' on 'bsfrac01' succeeded
    CRS-2676: Start of 'ora.cssd' on 'bsfrac01' succeeded
    CRS-2672: Attempting to start 'ora.ctssd' on 'bsfrac01'
    CRS-2676: Start of 'ora.ctssd' on 'bsfrac01' succeeded
    ASM created and started successfully.
    DiskGroup DATA1 created successfully.
    clscfg: -install mode specified
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    CRS-2672: Attempting to start 'ora.crsd' on 'bsfrac01'
    CRS-2676: Start of 'ora.crsd' on 'bsfrac01' succeeded
    CRS-4256: Updating the profile
    Successful addition of voting disk 0ea2052d8a714fd7bf46d9d5c785483e.
    Successfully replaced voting disk group with +DATA1.
    CRS-4256: Updating the profile
    CRS-4266: Voting file(s) successfully replaced
    ## STATE File Universal Id File Name Disk group
    1. ONLINE 0ea2052d8a714fd7bf46d9d5c785483e (ORCL:DISK1) [DATA1]
    Located 1 voting disk(s).
    *Failed to rmtcopy "/tmp/filekRIMbG" to "/u01/app/11.2/grid/gpnp/manifest.txt" for nodes {bsfrac01,bsfrac02}, rc=256*
    *Failed to rmtcopy "/u01/app/11.2/grid/gpnp/bsfrac01/profiles/peer/profile.xml" to "/u01/app/11.2/grid/gpnp/profiles/peer/profile.xml" for nodes {bsfrac01,bsfrac02}, rc=256*
    rmtcopy aborted
    Failed to promote local gpnp setup to other cluster nodes
    CRS-2673: Attempting to stop 'ora.crsd' on 'bsfrac01'
    CRS-2677: Stop of 'ora.crsd' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.asm' on 'bsfrac01'
    CRS-2677: Stop of 'ora.asm' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.ctssd' on 'bsfrac01'
    CRS-2677: Stop of 'ora.ctssd' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'bsfrac01'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'bsfrac01'
    CRS-2677: Stop of 'ora.cssd' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'bsfrac01'
    CRS-2677: Stop of 'ora.gpnpd' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'bsfrac01'
    CRS-2677: Stop of 'ora.gipcd' on 'bsfrac01' succeeded
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'bsfrac01'
    CRS-2677: Stop of 'ora.mdnsd' on 'bsfrac01' succeeded
    Initial cluster configuration failed. See /u01/app/11.2/grid/cfgtoollogs/crsconfig/rootcrs_bsfrac01.log for details
    [root@bsfrac01 grid]#
    [oracle@bsfrac01 bin]$ ./cluvfy stage -post crsinst -n bsfrac01,bsfrac02 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "bsfrac01"
    Destination Node Reachable?
    bsfrac01 yes
    bsfrac02 yes
    Result: Node reachability check passed from node "bsfrac01"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    bsfrac01 passed
    bsfrac02 passed
    Result: User equivalence check passed for user "oracle"
    ERROR:
    PRKC-1094 : Failed to retrieve the active version of crs: {0}
    Checking time zone consistency...
    Time zone consistency check passed.
    ERROR:
    PRKC-1093 : Failed to retrieve the version of crs software on node "java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
    " : {1}
    ERROR:
    Cluster manager integrity check failed
    PRVF-5434 : Cannot identify the current CRS software version
    UDev attributes check for OCR locations started...
    Result: UDev attributes check passed for OCR locations
    UDev attributes check for Voting Disk locations started...
    ERROR:
    PRVF-5197 : Failed to retrieve voting disk locationsPRKC-1092 : Failed to retrieve the location of votedisks: java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
    Result: UDev attributes check failed for Voting Disk locations
    Check default user file creation mask
    Node Name Available Required Comment
    bsfrac01 0022 0022 passed
    bsfrac02 0022 0022 passed
    Result: Default user file creation mask check passed
    Checking cluster integrity...
    Node Name
    bsfrac01
    Cluster integrity check failed This check did not run on the following node(s):
    bsfrac02
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    All nodes free of non-clustered, local-only configurations
    ERROR:
    PRKC-1094 : Failed to retrieve the active version of crs: {0}
    ERROR:
    PRVF-5300 : Failed to retrieve active version for CRS on this node
    OCR integrity check failed
    Checking CRS integrity...
    ERROR:
    PRKC-1094 : Failed to retrieve the active version of crs: {0}
    ERROR:
    PRVF-5300 : Failed to retrieve active version for CRS on this node
    CRS integrity check failed
    OCR detected on ASM. Running ACFS Integrity checks...
    Starting check to see if ASM is running on all cluster nodes...
    PRVF-5137 : Failure while checking ASM status on node "bsfrac01"
    PRVF-5137 : Failure while checking ASM status on node "bsfrac02"
    Starting Disk Groups check to see if at least one Disk Group configured...
    PRVF-5112 : An Exception occurred while checking for Disk Groups
    PRVF-5114 : Disk Group check failed. No Disk Groups configured
    Task ACFS Integrity check failed
    Checking Oracle Cluster Voting Disk configuration...
    ERROR:
    PRKC-1093 : Failed to retrieve the version of crs software on node "java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
    " : {1}
    ERROR:
    PRVF-5434 : Cannot identify the current CRS software version
    PRVF-5431 : Oracle Cluster Voting Disk configuration check failed
    Checking to make sure user "oracle" is not in "root" group
    Node Name Status Comment
    bsfrac01 does not exist passed
    bsfrac02 does not exist passed
    Result: User "oracle" is not part of "root" group. Check passed
    Post-check for cluster services setup was unsuccessful on all the nodes.
    [oracle@bsfrac01 bin]$ /u01/app/11.2/grid/bin/ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 3
    Total space (kbytes) : 262120
    Used space (kbytes) : 408
    Available space (kbytes) : 261712
    ID : 1671840043
    Device/File Name : +DATA1
    Device/File integrity check succeeded
    Device/File not configured
    Device/File not configured
    Device/File not configured
    Device/File not configured
    Cluster registry integrity check succeeded
    Logical corruption check bypassed due to non-privileged user
    ASM looks to be up and running..
    [oracle@bsfrac01 bin]$ /usr/sbin/oracleasm listdisks
    DISK1
    DISK2
    DISK3
    DISK4
    DISK5
    DISK6
    [oracle@bsfrac01 bin]$ /usr/sbin/oracleasm status
    Checking if ASM is loaded: yes
    Checking if /dev/oracleasm is mounted: yes
    Please help.

    before installation have u configure the private interconnect on both the nodes to same network adapter..
    for example on node 1 if the private interconnect is on eth0 then on the node 2 it should use eth0 only...
    for private interconnect use the hostonly option on both the nodes in the network configuration page of the vmware or virtual box..
    and for public network it can be bridged
    more over if you are installing on the laptop its good to configure the SSH using the OUI.. rather than doing it manually.. as it saves time
    the private and the public networks should not have same range of ip address. like if public address are like 192.168.2.222/255.255.255.0 and private address have to be different like 10.10.1.2/255.0.0.0 (this is just an example)
    have to configured the NTP.
    any ways try installing the oracle rac on virtual box follow the steps given the below website they are pretty straight forward...
    http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php

  • Sun JAVA ES on SuSE - configuration failed

    Documentation for Sun JAVA ES says it is supported on RedHat. What are the chances that SuSE will also be supported.
    I attempted to install Sun JAVA ES on OpenSuSE 10.1. Taking one step at a time I installed the the Web Server and JavaDB The installation appeared to go fine but the configurations failed:
    Installation Summary Report
    Install Summary
    Java Enterprise System 5 : Installed
    Sun Java(TM) System Web Server 7.0 : Installed, Configuration Failed
    Java DB : Installed, Configure After Install
    Could someone tell me where I start to look to troubleshoot why the Configuration failed.
    Thanks

    John,
    it looks like TID 7007653 - if you are wondering why you couldn't find
    it, it's because the TID did not mention the specific error, I had to
    hunt through bugzilla to find it. I have (as I hope you can see)
    updated the TID so that others should be able to find it without having
    to go through your pain...
    Shaun Pond

  • Configuration Failed - Could not load the file or assembly Microsoft.IdentityModel

    I have followed the link "Setting up Sharepoint 2010 Development Environment on Windows 7" and while
    following the steps, I was not able to install one of the pre-requisite "Windows Identity Foundation (Windows6.1-KB974405-x64.msu)" which was downloaded from Microsoft website at URL:
    http://www.microsoft.com/en-us/download/details.aspx?id=17331, however, I was able to complete the SharePoint Server 2010 Installation Successfully. And to my surprise, when I run the
    SharePoint Products Configuration Wizard, in the very 2nd Step of configuration, I faced the below issue.
    Configuration Failed
    One or more configuration settings failed. Completed configuration settings will not be rolled back. Resolve the problem and run this configuration wizard again. The following contains detailed information about the failure:
    Failed to create the configuration database.
    An exception of type System.IO.FileNotFoundException was thrown. Additional exception information: Could not load file or assembly 'Microsoft.IdentityModel, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
    dependencies. The system cannot find the file specified.
    To diagnose the problem, review the application event log and the configuration log file located at: C:\Program Files\Common Files\Microsoft Shared\ Web Server Extensions\14\LOGS\PSCDiagnostics 12_13_2013_8_30_44_220_403724746.log
    I am pretty sure that I have followed each and every step and understood and the only place that I have missed is installing the pre-requisites as mentioned above. How can I fix this issue.
    Let me know if you need more information such as log file content which got generated. Your help in fixing this issue will be really helpfull for me.
    Thanks
    Mahesh

    Hi  Mahesh,
    Thank you for your posting!
    Your issue is caused by that  your windows 7 is not installed Windows Identity Foundation.
    As you say that you were not able to install the Windows Identity Foundation, could you provide more detail about what  you are facing ? Which version of Windows 7 you have? 32bit or
    64bit? Also make sure your computer has installed Internet Information Services (IIS) 7.0  and  .NET Framework 3.5.
    Thank you for your understanding and support.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Updating hybrid configuration failed - Kerberos authentication: The network path was not found

    I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
    When I run the Manage Hybrid Configuration, I receive the following error:
    Updating hybrid configuration failed with error
    'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
    path was not found.
    The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
    [1/5/2014 21:21:1] INFO:Opening runspace to
    http://[servername]/powershell?serializationLevel=Full
    [1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
    [1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
    error occured while using Kerberos authentication: The network path was not found. 
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
       at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
       at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
       at System.Management.Automation.Runspaces.RunspacePool.Open()
       at System.Management.Automation.RemoteRunspace.Open()
       at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
       at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
    I have sought help, posting on the forum at community.office365.com -
    http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
    Has anyone else come across this problem running the Hybrid Configuration Wizard?

    Hello Darrell,
    Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
    http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
    looks good.
    As the article states you can run the Exchange BPA and it will check if any of these exist as well.

  • Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

    Hi Techys,
    Kindly help me to resolve the below issue
    "Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
    Many Thanks,
    Madhu

    Hi,
    Follow this link for smooth installation for SP 2010 on Win 7.
    http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
    Murugesa Pandian.,MCTS|App.Development|Configure

  • Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install

    I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
    Setup cannot be completed…  Final configuration failed to install.
    Everything else upgraded fine.
    There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
    Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
    [16:00:43]:           Always: :!***** Installing: POSTINSTALL ***
    [16:00:43]:           Info:      :SetProgressScreen: StartMinorStep.
    [16:00:43]:           Warn:    :ApplyUpdates: Unable to load QFE file.
    [16:00:43]:           Always: :Doing Preinstall task for POSTINSTALL
    [16:00:43]:           Warn:    :CheckAndLoadUpdateFiles: Unable to load QFE file.
    [16:00:43]:           Always: :Doing Install task for POSTINSTALL
    [16:00:44]:           Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
    [16:00:44]:           Info:      :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall  Method: PostInstallProcessor
    [16:00:44]:           Info:      :SetProgressScreen: Init Exe Install progress.
    [16:00:44]:           Info:      :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
    Manager\Setup
    [16:00:44]:           Error:     :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception.  We will return installSuccessful = false.:
    Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
    [16:00:44]:           Error:     :StackTrace:   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
    [16:00:44]:           Error:     :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
    is denied.
    [16:00:44]:           Error:     :InnerException.StackTrace:   at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
    throwOnTopLevelDirectoryNotFound)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
    [16:00:44]:           Error:     :ProcessInstalls: Install Item Final Configuration failed to install.  We did not launch the post process delegate.
    [16:00:44]:           Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
    [16:00:44]:           Info:      :SetProgressScreen: FinishMinorStep.
    [16:00:44]:           Always: :****************************************************************
    [16:00:44]:           Always: :****Starting*RollBack*******************************************
    [16:00:44]:           Always: :****************************************************************
    [16:00:44]:           Info:      :SetProgressScreen: StartMinorStep.
    [16:00:44]:           Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
    [16:00:44]:           Always: :****************************************************************
    [16:00:44]:           Always: :****Ended*RollBack**********************************************
    [16:00:44]:           Always: :****************************************************************
    [16:00:44]:           Always: :Entering Page: FinishPage
    The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.”  I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
    was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.”  Based on everything else referenced in the log file previously, it seems like it was trying to locate
    this file in D:\Program Files\System Center 2012\Operations Manager\Setup.  Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
    Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
    gives me:
    SkuForLicense Version     TimeOfExpiration
           Retail 7.1.10226.0 12/31/9999 11:59:59 PM
    The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.)  Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
    Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)?  I am not sure if there were supposed to be any further
    configuration steps that did not get completed, so i dont know how stable SCOM is now.  Should I re-run the R2 installer?  Or is it OK as is?  The only info online about a SCOM Install where the final configuration failed to install dealt with
    an error upgrading the SCOM Console, which is not relevant to my situation.  This is my test SCOM environment, running on a VM.  I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
    work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.

    Hi,
    Please refer to the following links:
    Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
    http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
    Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
    http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Update of Development Configuration fails

    Hello,
    we created an SC based on template WebDynpro. During the project we realized that we might need more tools like CAF. So I added the corresponding dependency in the software component.
    Now, when starting the NWDS it is detected that a new configuration exists.
    Unfortunately after confirming that the configuration should be updated, I always get an error:
    Evaluating of Configurations failed
    org.eclipse.core.runtime.CoreException[0]: com.sap.tc.devconf.update.ConfigurationEvaluationException: Error during evaluation of variant mapping delta: Error when reading component meta data from local file: Cannot read component definition. File does not exist: C:\Users\mkr\.dtc\1\DCs\camelot.com\Cmeio\runtime\_comp\.dcdef
         at com.sap.tc.devconf.update.impl.LocalComponentHelper.visitUsedComponentsFromCompartment(LocalComponentHelper.java:113)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleUsageDelta(CompartmentEvaluator.java:573)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleUsageDeltas(CompartmentEvaluator.java:554)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleCompartmentModified(CompartmentEvaluator.java:135)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.evaluate(CompartmentEvaluator.java:92)
         at com.sap.tc.devconf.update.impl.ConfigDeltaEvaluator.evaluateConfigurationDelta(ConfigDeltaEvaluator.java:166)
         at com.sap.tc.devconf.update.impl.ConfigDeltaEvaluator.evaluate(ConfigDeltaEvaluator.java:69)
         at com.sap.tc.devconf.update.impl.ConfigurationUpdater.evaluate(ConfigurationUpdater.java:83)
         at com.sap.ide.eclipse.component.devconf.ReimportDevConfigCommand.updateSoftIfPossiblePossible(ReimportDevConfigCommand.java:307)
         at com.sap.ide.eclipse.component.provider.actions.ReimportDevConfAction.run(ReimportDevConfAction.java:102)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.sap.tc.devconf.InvalidDefinitionException: Error when reading component meta data from local file: Cannot read component definition. File does not exist: C:\Users\mkr\.dtc\1\DCs\camelot.com\Cmeio\runtime\_comp\.dcdef
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCDataLocally(DevelopmentComponentNode.java:757)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCData(DevelopmentComponentNode.java:430)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.getDevelopmentComponent(DevelopmentComponentNode.java:125)
         at com.sap.tc.devconf.impl.DCDependenciesManager.listDirectlyUsedDCNodes(DCDependenciesManager.java:882)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.listUsedDCs(DevelopmentComponentNode.java:837)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.listUsedDCs(DevelopmentComponentNode.java:845)
         at com.sap.tc.devconf.update.impl.LocalComponentHelper.visitUsedComponentsFromCompartment(LocalComponentHelper.java:83)
         ... 35 more
    Caused by: com.sap.tc.complib.provider.ProviderException: Cannot read component definition. File does not exist: C:\Users\mkr\.dtc\1\DCs\camelot.com\Cmeio\runtime\_comp\.dcdef
         at com.sap.tc.devconf.impl.DCFileInputProvider.getStreamForDC(DCFileInputProvider.java:114)
         at com.sap.tc.complib.impl.DevelopmentComponentImpl.initialize(DevelopmentComponentImpl.java:720)
         at com.sap.tc.complib.ComponentFactory.initialize(ComponentFactory.java:421)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCDataLocally(DevelopmentComponentNode.java:745)
         ... 41 more
    Caused by:
    com.sap.tc.devconf.InvalidDefinitionException: Error when reading component meta data from local file: Cannot read component definition. File does not exist: C:\Users\mkr\.dtc\1\DCs\camelot.com\Cmeio\runtime\_comp\.dcdef
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCDataLocally(DevelopmentComponentNode.java:757)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCData(DevelopmentComponentNode.java:430)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.getDevelopmentComponent(DevelopmentComponentNode.java:125)
         at com.sap.tc.devconf.impl.DCDependenciesManager.listDirectlyUsedDCNodes(DCDependenciesManager.java:882)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.listUsedDCs(DevelopmentComponentNode.java:837)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.listUsedDCs(DevelopmentComponentNode.java:845)
         at com.sap.tc.devconf.update.impl.LocalComponentHelper.visitUsedComponentsFromCompartment(LocalComponentHelper.java:83)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleUsageDelta(CompartmentEvaluator.java:573)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleUsageDeltas(CompartmentEvaluator.java:554)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleCompartmentModified(CompartmentEvaluator.java:135)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.evaluate(CompartmentEvaluator.java:92)
         at com.sap.tc.devconf.update.impl.ConfigDeltaEvaluator.evaluateConfigurationDelta(ConfigDeltaEvaluator.java:166)
         at com.sap.tc.devconf.update.impl.ConfigDeltaEvaluator.evaluate(ConfigDeltaEvaluator.java:69)
         at com.sap.tc.devconf.update.impl.ConfigurationUpdater.evaluate(ConfigurationUpdater.java:83)
         at com.sap.ide.eclipse.component.devconf.ReimportDevConfigCommand.updateSoftIfPossiblePossible(ReimportDevConfigCommand.java:307)
         at com.sap.ide.eclipse.component.provider.actions.ReimportDevConfAction.run(ReimportDevConfAction.java:102)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.sap.tc.complib.provider.ProviderException: Cannot read component definition. File does not exist: C:\Users\mkr\.dtc\1\DCs\camelot.com\Cmeio\runtime\_comp\.dcdef
         at com.sap.tc.devconf.impl.DCFileInputProvider.getStreamForDC(DCFileInputProvider.java:114)
         at com.sap.tc.complib.impl.DevelopmentComponentImpl.initialize(DevelopmentComponentImpl.java:720)
         at com.sap.tc.complib.ComponentFactory.initialize(ComponentFactory.java:421)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCDataLocally(DevelopmentComponentNode.java:745)
         ... 41 more
    Caused by:
    com.sap.tc.complib.provider.ProviderException: Cannot read component definition. File does not exist: C:\Users\mkr\.dtc\1\DCs\camelot.com\Cmeio\runtime\_comp\.dcdef
         at com.sap.tc.devconf.impl.DCFileInputProvider.getStreamForDC(DCFileInputProvider.java:114)
         at com.sap.tc.complib.impl.DevelopmentComponentImpl.initialize(DevelopmentComponentImpl.java:720)
         at com.sap.tc.complib.ComponentFactory.initialize(ComponentFactory.java:421)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCDataLocally(DevelopmentComponentNode.java:745)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.loadDCData(DevelopmentComponentNode.java:430)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.getDevelopmentComponent(DevelopmentComponentNode.java:125)
         at com.sap.tc.devconf.impl.DCDependenciesManager.listDirectlyUsedDCNodes(DCDependenciesManager.java:882)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.listUsedDCs(DevelopmentComponentNode.java:837)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.listUsedDCs(DevelopmentComponentNode.java:845)
         at com.sap.tc.devconf.update.impl.LocalComponentHelper.visitUsedComponentsFromCompartment(LocalComponentHelper.java:83)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleUsageDelta(CompartmentEvaluator.java:573)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleUsageDeltas(CompartmentEvaluator.java:554)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.handleCompartmentModified(CompartmentEvaluator.java:135)
         at com.sap.tc.devconf.update.impl.CompartmentEvaluator.evaluate(CompartmentEvaluator.java:92)
         at com.sap.tc.devconf.update.impl.ConfigDeltaEvaluator.evaluateConfigurationDelta(ConfigDeltaEvaluator.java:166)
         at com.sap.tc.devconf.update.impl.ConfigDeltaEvaluator.evaluate(ConfigDeltaEvaluator.java:69)
         at com.sap.tc.devconf.update.impl.ConfigurationUpdater.evaluate(ConfigurationUpdater.java:83)
         at com.sap.ide.eclipse.component.devconf.ReimportDevConfigCommand.updateSoftIfPossiblePossible(ReimportDevConfigCommand.java:307)
         at com.sap.ide.eclipse.component.provider.actions.ReimportDevConfAction.run(ReimportDevConfAction.java:102)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Any idea what's wrong here?
    Thanks,
    Michael

    Hi,
    Just go through this consolidated help.sap.com link.
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm]
    Regards,

Maybe you are looking for

  • HELP!!!! HP Officejet 6500A Plus e-All-in-One Printer - E710n - will not stay online

    I have 2 desk tops a net book and a lap top connected to it and all test printed fine and then after a period of time the printer goes off line and then it will not work.  I can restart the printer and it still will not work.  The router does not eve

  • HELP MY EARPHONES DO NOT WANT TO WORK

    I have had my blackberry Z10 for about a week now. Everything is perfect but today when i tried to put my earphones in (the one that came with the phone) it did not work. I hav used these same earphones in the device before and it has worked fine. Is

  • IOS 7 changed all the colors. How do you change it back?

    When I upgraded to IOS 7, the default colors changed. They are too light. The only thing I found was to "Invert colore" which is not too good either. Can you change the color scheme back? Is it possible to change the background colors of the Icons? S

  • I keep getting The song could not be used because the original file could not be found

    When trying to play a song from my itunes I keep getting The song   ?? could not be used because the original file could not be found then the option to Locate or Cancel If I click on Locate I have No idea what to click on next. Plus I have way too m

  • Installation Flash player

    Bonjour, Je ne peux plus installer Flash Player (sur vista) suite à des crashs intempestifs de ce dernier après mise à jour de la version 14 à 15. Je l'ai désinstallé totalement. Supprimé : Macromed\Flash. Effectué un nettoyage complet du PC et navig