ESI Days in form 6 and 7
Hello,
I wanted to know in case of LOP in a current month where an employee has been separated with the current organization, what should be the number of ESI days that should be ideally coming in the RT table?
e.g. If the employee is separated on 25th of current month, with 6 days of LOP, what would be the ESI number of days in Form 6 and Form 7.
Thanks in advance.
Regards,
Harshad.
in that case
Calendar Days - Lop Days = total Working Days right
if yes write a PCR TKSOLL (calendar Days_ - Lop Days that is /845 and add to wage type which is custom developed so that you can see the no of Working days
Similar Messages
-
My computer went crazy yesterday on two occasions involving PDF documents. One dealt with attachments to an email from a bona fide corporation. The other dealt with IRS PDF forms & schedules needed for today's submission.
As both dealt with PDF and had nothing else in common, I suspected my PC had a virus. When I asked a local store technician, he agreed. I turned to Norton, which protects my PC from viruses, and after a few hours of really thorough searching, the computer was found to have no viruses.
Before describing what I call "crazy" computer behavior, you need to know that I have long had IE8 as my default browser but a few weeks ago switched to Mozilla Firefox because IE8 had beome incompatible with some websites from which I get information.
When I received the email from AT&T email service and clicked the first of four icons representing attachments, there was figuratively an explosion on my monitor: a series of new tabs, each called New Tab, burst onto the monitor--but no text or picture. The new tabs appeared faster than I coul kill them. I finally decided just to shut down the computer, hoping they would not reappear when I restarted. I was wrong. After 2 repeats, I decided to forget about the attachments and asked the sender to send them to me by regular mail.
That was no solution for my IRS PDFs. I wanted to complete filling in the various forms and schedules that I had begun months ago so that I could mail them today to the IRS (without having to copy them all in ink). When I tried to open the first one, BOOM. The same thing happened: the blizzard of New Tabs atop blank pages; my IRS form or schedule did not show up. Did the same shutdown/restart routine with the same results.
When I looked at the list of current forms that had to be completed, I noticed something very strange: the icons that began the listing of the documents' names were replaced one by one by Mozilla icons. When I moused over them, they said Firefox HTML. Why?
Starting the day today, I had the same experience. What's more, when I started to retrieve 2012 IRS PDFs from a year ago, the same New Tab tabs appeared and had to be killed, and Mozilla icons replaced whatever icon was there before.
Assuming that the problem arose with Adobe Reader's reading of the PDFs, I contacted Adobe but got no helpful phone number because PDFs are a free service and was directed to use this Forum to get help.
What do I have to do to (a) read and use PDFs in the normal way and (b) remove the Mozilla icon from those that have appeared on icon documents. If Mozilla is the source of the problem, shall I go back to IE8? (In my 80s, I want eventually to replace my old computer but for the time being I must continue using it. It will not take an IE9. Anther possible default browser would be Google Chrome, but I have unfavorable impressions of it because of its intrusiveness, loading my PC with stuff I do not need.
Can you help?The problem is absolutely not Reader. The problem is that FireFox has stepped in front of Reader and handles all the PDF stuff - wrongly in your case. FireFox is DESIGNED to take over PDF files. But it is not capable of doing IRS forms!
To start with go back to IE for these forms. When you save them to disk DO NOT DOUBLE CLICK ON THEM until this is fixed. Just open the in the normal way - start Adobe Reader and use Open from the File menu. -
Weblogic 10.3.5 with oracle forms and reports 11.1.2.1.0
Hi All,
I am new to 11g concept (actually web based, have worked till 6i) and trying to upgrade my existing system (6i) to 11g. I have installed Weblogic 10.3.5 with forms and reports 11.1.2.1.0 on windows 7 32 bit. I can connect to my database (10g) from Form builder.
But when I try to open a form/pll of 10g or 6i, it says PDE-PLI018 could not find library and it shows the path of my earlier folder, which now does not exist.
I have made changes in registry FORMS_PATH, FORMS_BUILDER_PATH, UI_ICON
And in default.env file FORMS_PATH and CLASSPATH
I have added entry to tnsnames.ora, through which I can connect to DB. And have followed below site to configure weblogic and FM forms and reports;
http://windows7bugs.wordpress.com/2013/04/06/install-configure-oracle-weblogic-server-10-3-6-forms-reports-11g-on-windows8windows-2008-r2/
I have few doubts in my mind;
1) Do we have to connect (create a bridge) to DB from weblogic except tnsnames.ora.
2) For library error I think I am missing some settings to be done.
3) If I am able to rectify above error then can I directly use http://localhost:8888/forms/frmservlet and access the system from another pc, or still there are some modifications needed.
I am trying this from last 3 days, but couldn't find the solution, kindly help me out for same, eagerly waiting for your reply.
Regards,
AshHi InoL,
Thanks for your reply, Yes, as there are many forms in my system, there is a chance that libraries attached are with the path. -
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
Hello everybody. I am a web designer (NOT a developer)
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
I have used phpform.org/ to custom build a submission form. Then I opened that html in dreamweaver (so that I could edit colors, fonts, and delete the phpform.org advetisement)
Now I need to link the 'submit button' so that it will e-mail me the completed form.
(formphp.org wants me to subscribe to a servie that I pay for in order to have the form e-mailed to myself.)
(after I get the submit button linked to an e-mail I will pull the html of my completed form into Muse- but I don't think that is really relevent)
I'm sure one of you can help point me in the right direction! I can't write my own code so detailed help is appreciated!
-Brenna
The e-mail I would like the form sent to is:
[email protected]
Here is the the code for my form 'as is' :
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Create a Profile</title>
<link rel="stylesheet" type="text/css" href="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.css" media="all">
<script type="text/javascript" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.js"></script>
</head>
<body id="main_body" >
<img id="top" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/top.png" alt="">
<div id="form_container">
<h1><a>Create a Profile</a></h1>
<form id="form_836144" class="appnitro" enctype="multipart/form-data" method="post" action="">
<div class="form_description">
<h2 align="center">Create a Tommy Lemonade Profile</h2>
<p></p>
</div>
<ul >
<li id="li_1" >
<label class="description" for="element_1">Name </label>
<span>
<input id="element_1_1" name= "element_1_1" class="element text" maxlength="255" size="8" value=""/>
<label>First</label>
</span>
<span>
<input id="element_1_2" name= "element_1_2" class="element text" maxlength="255" size="14" value=""/>
<label>Last</label>
</span>
</li> <li id="li_23" >
<label class="description" for="element_23">Service Provider Type </label>
<span>
<input id="element_23_1" name="element_23_1" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_1">Barber</label>
<input id="element_23_2" name="element_23_2" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_2">Hairstylist</label>
<input id="element_23_3" name="element_23_3" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_3">Nail Technician</label>
<input id="element_23_4" name="element_23_4" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_4">Massage Therapist</label>
<input id="element_23_5" name="element_23_5" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_5">Skin Care</label>
<input id="element_23_6" name="element_23_6" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_6">Esthetician</label>
<input id="element_23_7" name="element_23_7" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_7">Make Up Artist</label>
</span><p class="guidelines" id="guide_23"><small>Select all that apply.</small></p>
</li> <li id="li_19" >
<label class="description" for="element_19">Top 5 services </label>
<div>
<textarea id="element_19" name="element_19" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_19"><small>Please list your top 5 services</small></p>
</li> <li id="li_20" >
<label class="description" for="element_20">List all services you offer & thier starting price </label>
<div>
<textarea id="element_20" name="element_20" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_20"><small>please use a new line for each service. You can do this by pressing 'enter' after each starting price.
</small></p>
</li> <li id="li_12" >
<label class="description" for="element_12">Personal Phone </label>
<span>
<input id="element_12_1" name="element_12_1" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_12_1">(###)</label>
</span>
<span>
<input id="element_12_2" name="element_12_2" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_12_2">###</label>
</span>
<span>
<input id="element_12_3" name="element_12_3" class="element text" size="4" maxlength="4" value="" type="text">
<label for="element_12_3">####</label>
</span>
<p class="guidelines" id="guide_12"><small>Only fill in if you want clients to be able to contact you on your personal phone line rather than the phone at your place of employment. </small></p>
</li> <li id="li_21" >
<label class="description" for="element_21">E-mail (Required) </label>
<div>
<input id="element_21" name="element_21" class="element text medium" type="text" maxlength="255" value=""/>
</div><p class="guidelines" id="guide_21"><small>Staff at Tommy Lemonade will use this e-mail as your primary contact information. it will also be seen by your potential clients.</small></p>
</li> <li id="li_6" >
<label class="description" for="element_6">Confirm your e-mail (Required) </label>
<div>
<input id="element_6" name="element_6" class="element text medium" type="text" maxlength="255" value=""/>
</div><p class="guidelines" id="guide_6"><small>Please re-type your e-mail address</small></p>
</li> <li id="li_3" >
<label class="description" for="element_3">Web Site </label>
<div>
<input id="element_3" name="element_3" class="element text medium" type="text" maxlength="255" value="http://"/>
</div><p class="guidelines" id="guide_3"><small>If you don't have your own website feel free to link your professional Facebook, Google+ etc... </small></p>
</li> <li id="li_4" >
<label class="description" for="element_4">Place of employment </label>
<div>
<input id="element_4" name="element_4" class="element text medium" type="text" maxlength="255" value=""/>
</div>
</li> <li id="li_2" >
<label class="description" for="element_2">Work Address </label>
<div>
<input id="element_2_1" name="element_2_1" class="element text large" value="" type="text">
<label for="element_2_1">Street Address</label>
</div>
<div>
<input id="element_2_2" name="element_2_2" class="element text large" value="" type="text">
<label for="element_2_2">Address Line 2</label>
</div>
<div class="left">
<input id="element_2_3" name="element_2_3" class="element text medium" value="" type="text">
<label for="element_2_3">City</label>
</div>
<div class="right">
<input id="element_2_4" name="element_2_4" class="element text medium" value="" type="text">
<label for="element_2_4">State / Province / Region</label>
</div>
<div class="left">
<input id="element_2_5" name="element_2_5" class="element text medium" maxlength="15" value="" type="text">
<label for="element_2_5">Postal / Zip Code</label>
</div>
<div class="right">
<select class="element select medium" id="element_2_6" name="element_2_6">
<option value="" selected="selected"></option>
<option value="Afghanistan" >Afghanistan</option>
<option value="Albania" >Albania</option>
<option value="Algeria" >Algeria</option>
<option value="Andorra" >Andorra</option>
<option value="Antigua and Barbuda" >Antigua and Barbuda</option>
<option value="Argentina" >Argentina</option>
<option value="Armenia" >Armenia</option>
<option value="Australia" >Australia</option>
<option value="Austria" >Austria</option>
<option value="Azerbaijan" >Azerbaijan</option>
<option value="Bahamas" >Bahamas</option>
<option value="Bahrain" >Bahrain</option>
<option value="Bangladesh" >Bangladesh</option>
<option value="Barbados" >Barbados</option>
<option value="Belarus" >Belarus</option>
<option value="Belgium" >Belgium</option>
<option value="Belize" >Belize</option>
<option value="Benin" >Benin</option>
<option value="Bhutan" >Bhutan</option>
<option value="Bolivia" >Bolivia</option>
<option value="Bosnia and Herzegovina" >Bosnia and Herzegovina</option>
<option value="Botswana" >Botswana</option>
<option value="Brazil" >Brazil</option>
<option value="Brunei" >Brunei</option>
<option value="Bulgaria" >Bulgaria</option>
<option value="Burkina Faso" >Burkina Faso</option>
<option value="Burundi" >Burundi</option>
<option value="Cambodia" >Cambodia</option>
<option value="Cameroon" >Cameroon</option>
<option value="Canada" >Canada</option>
<option value="Cape Verde" >Cape Verde</option>
<option value="Central African Republic" >Central African Republic</option>
<option value="Chad" >Chad</option>
<option value="Chile" >Chile</option>
<option value="China" >China</option>
<option value="Colombia" >Colombia</option>
<option value="Comoros" >Comoros</option>
<option value="Congo" >Congo</option>
<option value="Costa Rica" >Costa Rica</option>
<option value="Côte d'Ivoire" >Côte d'Ivoire</option>
<option value="Croatia" >Croatia</option>
<option value="Cuba" >Cuba</option>
<option value="Cyprus" >Cyprus</option>
<option value="Czech Republic" >Czech Republic</option>
<option value="Denmark" >Denmark</option>
<option value="Djibouti" >Djibouti</option>
<option value="Dominica" >Dominica</option>
<option value="Dominican Republic" >Dominican Republic</option>
<option value="East Timor" >East Timor</option>
<option value="Ecuador" >Ecuador</option>
<option value="Egypt" >Egypt</option>
<option value="El Salvador" >El Salvador</option>
<option value="Equatorial Guinea" >Equatorial Guinea</option>
<option value="Eritrea" >Eritrea</option>
<option value="Estonia" >Estonia</option>
<option value="Ethiopia" >Ethiopia</option>
<option value="Fiji" >Fiji</option>
<option value="Finland" >Finland</option>
<option value="France" >France</option>
<option value="Gabon" >Gabon</option>
<option value="Gambia" >Gambia</option>
<option value="Georgia" >Georgia</option>
<option value="Germany" >Germany</option>
<option value="Ghana" >Ghana</option>
<option value="Greece" >Greece</option>
<option value="Grenada" >Grenada</option>
<option value="Guatemala" >Guatemala</option>
<option value="Guinea" >Guinea</option>
<option value="Guinea-Bissau" >Guinea-Bissau</option>
<option value="Guyana" >Guyana</option>
<option value="Haiti" >Haiti</option>
<option value="Honduras" >Honduras</option>
<option value="Hong Kong" >Hong Kong</option>
<option value="Hungary" >Hungary</option>
<option value="Iceland" >Iceland</option>
<option value="India" >India</option>
<option value="Indonesia" >Indonesia</option>
<option value="Iran" >Iran</option>
<option value="Iraq" >Iraq</option>
<option value="Ireland" >Ireland</option>
<option value="Israel" >Israel</option>
<option value="Italy" >Italy</option>
<option value="Jamaica" >Jamaica</option>
<option value="Japan" >Japan</option>
<option value="Jordan" >Jordan</option>
<option value="Kazakhstan" >Kazakhstan</option>
<option value="Kenya" >Kenya</option>
<option value="Kiribati" >Kiribati</option>
<option value="North Korea" >North Korea</option>
<option value="South Korea" >South Korea</option>
<option value="Kuwait" >Kuwait</option>
<option value="Kyrgyzstan" >Kyrgyzstan</option>
<option value="Laos" >Laos</option>
<option value="Latvia" >Latvia</option>
<option value="Lebanon" >Lebanon</option>
<option value="Lesotho" >Lesotho</option>
<option value="Liberia" >Liberia</option>
<option value="Libya" >Libya</option>
<option value="Liechtenstein" >Liechtenstein</option>
<option value="Lithuania" >Lithuania</option>
<option value="Luxembourg" >Luxembourg</option>
<option value="Macedonia" >Macedonia</option>
<option value="Madagascar" >Madagascar</option>
<option value="Malawi" >Malawi</option>
<option value="Malaysia" >Malaysia</option>
<option value="Maldives" >Maldives</option>
<option value="Mali" >Mali</option>
<option value="Malta" >Malta</option>
<option value="Marshall Islands" >Marshall Islands</option>
<option value="Mauritania" >Mauritania</option>
<option value="Mauritius" >Mauritius</option>
<option value="Mexico" >Mexico</option>
<option value="Micronesia" >Micronesia</option>
<option value="Moldova" >Moldova</option>
<option value="Monaco" >Monaco</option>
<option value="Mongolia" >Mongolia</option>
<option value="Montenegro" >Montenegro</option>
<option value="Morocco" >Morocco</option>
<option value="Mozambique" >Mozambique</option>
<option value="Myanmar" >Myanmar</option>
<option value="Namibia" >Namibia</option>
<option value="Nauru" >Nauru</option>
<option value="Nepal" >Nepal</option>
<option value="Netherlands" >Netherlands</option>
<option value="New Zealand" >New Zealand</option>
<option value="Nicaragua" >Nicaragua</option>
<option value="Niger" >Niger</option>
<option value="Nigeria" >Nigeria</option>
<option value="Norway" >Norway</option>
<option value="Oman" >Oman</option>
<option value="Pakistan" >Pakistan</option>
<option value="Palau" >Palau</option>
<option value="Panama" >Panama</option>
<option value="Papua New Guinea" >Papua New Guinea</option>
<option value="Paraguay" >Paraguay</option>
<option value="Peru" >Peru</option>
<option value="Philippines" >Philippines</option>
<option value="Poland" >Poland</option>
<option value="Portugal" >Portugal</option>
<option value="Puerto Rico" >Puerto Rico</option>
<option value="Qatar" >Qatar</option>
<option value="Romania" >Romania</option>
<option value="Russia" >Russia</option>
<option value="Rwanda" >Rwanda</option>
<option value="Saint Kitts and Nevis" >Saint Kitts and Nevis</option>
<option value="Saint Lucia" >Saint Lucia</option>
<option value="Saint Vincent and the Grenadines" >Saint Vincent and the Grenadines</option>
<option value="Samoa" >Samoa</option>
<option value="San Marino" >San Marino</option>
<option value="Sao Tome and Principe" >Sao Tome and Principe</option>
<option value="Saudi Arabia" >Saudi Arabia</option>
<option value="Senegal" >Senegal</option>
<option value="Serbia and Montenegro" >Serbia and Montenegro</option>
<option value="Seychelles" >Seychelles</option>
<option value="Sierra Leone" >Sierra Leone</option>
<option value="Singapore" >Singapore</option>
<option value="Slovakia" >Slovakia</option>
<option value="Slovenia" >Slovenia</option>
<option value="Solomon Islands" >Solomon Islands</option>
<option value="Somalia" >Somalia</option>
<option value="South Africa" >South Africa</option>
<option value="Spain" >Spain</option>
<option value="Sri Lanka" >Sri Lanka</option>
<option value="Sudan" >Sudan</option>
<option value="Suriname" >Suriname</option>
<option value="Swaziland" >Swaziland</option>
<option value="Sweden" >Sweden</option>
<option value="Switzerland" >Switzerland</option>
<option value="Syria" >Syria</option>
<option value="Taiwan" >Taiwan</option>
<option value="Tajikistan" >Tajikistan</option>
<option value="Tanzania" >Tanzania</option>
<option value="Thailand" >Thailand</option>
<option value="Togo" >Togo</option>
<option value="Tonga" >Tonga</option>
<option value="Trinidad and Tobago" >Trinidad and Tobago</option>
<option value="Tunisia" >Tunisia</option>
<option value="Turkey" >Turkey</option>
<option value="Turkmenistan" >Turkmenistan</option>
<option value="Tuvalu" >Tuvalu</option>
<option value="Uganda" >Uganda</option>
<option value="Ukraine" >Ukraine</option>
<option value="United Arab Emirates" >United Arab Emirates</option>
<option value="United Kingdom" >United Kingdom</option>
<option value="United States" >United States</option>
<option value="Uruguay" >Uruguay</option>
<option value="Uzbekistan" >Uzbekistan</option>
<option value="Vanuatu" >Vanuatu</option>
<option value="Vatican City" >Vatican City</option>
<option value="Venezuela" >Venezuela</option>
<option value="Vietnam" >Vietnam</option>
<option value="Yemen" >Yemen</option>
<option value="Zambia" >Zambia</option>
<option value="Zimbabwe" >Zimbabwe</option>
</select>
<label for="element_2_6">Country</label>
</div>
</li> <li id="li_5" >
<label class="description" for="element_5">Work Phone </label>
<span>
<input id="element_5_1" name="element_5_1" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_5_1">(###)</label>
</span>
<span>
<input id="element_5_2" name="element_5_2" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_5_2">###</label>
</span>
<span>
<input id="element_5_3" name="element_5_3" class="element text" size="4" maxlength="4" value="" type="text">
<label for="element_5_3">####</label>
</span>
<p class="guidelines" id="guide_5"><small>Please enter the phone number of the establishment where you work if applicable. </small></p>
</li> <li id="li_22" >
<label class="description" for="element_22">Schedule </label>
<div>
<textarea id="element_22" name="element_22" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_22"><small>Please feel free to include your schedule. What days you work, when are you days off, be sure to include your hours available (example: 9am-7pm) or if you have any 'by appointment only' days. </small></p>
</li> <li id="li_7" >
<label class="description" for="element_7">Profile Picture </label>
<div>
<input id="element_7" name="element_7" class="element file" type="file"/>
</div>
</li> <li id="li_8" >
<label class="description" for="element_8">Portfolio image </label>
<div>
<input id="element_8" name="element_8" class="element file" type="file"/>
</div>
</li> <li id="li_9" >
<label class="description" for="element_9">Portfolio image </label>
<div>
<input id="element_9" name="element_9" class="element file" type="file"/>
</div>
</li> <li id="li_10" >
<label class="description" for="element_10">Portfolio image </label>
<div>
<input id="element_10" name="element_10" class="element file" type="file"/>
</div>
</li> <li id="li_11" >
<label class="description" for="element_11">Portfolio image </label>
<div>
<input id="element_11" name="element_11" class="element file" type="file"/>
</div>
</li> <li id="li_13" >
<label class="description" for="element_13">Portfolio image </label>
<div>
<input id="element_13" name="element_13" class="element file" type="file"/>
</div>
</li> <li id="li_14" >
<label class="description" for="element_14">Portfolio image </label>
<div>
<input id="element_14" name="element_14" class="element file" type="file"/>
</div>
</li> <li id="li_15" >
<label class="description" for="element_15">Portfolio image </label>
<div>
<input id="element_15" name="element_15" class="element file" type="file"/>
</div>
</li> <li id="li_16" >
<label class="description" for="element_16">Portfolio image </label>
<div>
<input id="element_16" name="element_16" class="element file" type="file"/>
</div>
</li> <li id="li_17" >
<label class="description" for="element_17">Portfolio image </label>
<div>
<input id="element_17" name="element_17" class="element file" type="file"/>
</div>
</li> <li id="li_18" >
<label class="description" for="element_18">Portfolio image </label>
<div>
<input id="element_18" name="element_18" class="element file" type="file"/>
</div>
</li>
<li class="buttons">
<input type="hidden" name="form_id" value="836144" />
<input id="saveForm" class="button_text" type="submit" name="submit" value="Submit" />
</li>
</ul>
</form>
<div id="footer">
</div>
</div>
<img id="bottom" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/bottom.png" alt="">
</body>
</html>I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O. -
Error while configuring Oracle Forms and Reports 11g
Hi,
I have been trying to install oracle forms and reports from last 5 days.
I have installed weblogic server 10.3.6
and trying to install forms and reports 11.1.2
Earlier while installing I did not configure it as it was giving some error so I just installed it but not again I have to configure it and I am getting the same error its as follows:-
INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install.
I have latest version of WLS but still its not accepting.
Please help me guys , struggled a lot for it...What shall I do?Thanks Guys for you suggestions I came one step foreward
For this I downloaded the exact version 10.3.5 and problem got resolved.
But now getting new problem at the end of configuration part on Creating Domain, process is getting stuck. I waited for more than an hour but still progress is 0%.
Edited by: 966714 on Oct 26, 2012 7:25 PM -
Can't download forms and reports server
for 2 days now i have tried to download this.
from http://www.oracle.com/technology/software/index.html
in the middleware section I select "Forms & Reports Services"
then "Oracle Application Server Forms and Reports Services 10g (9.0.4.0.1) for Microsoft Windows"
I get the license page and accept
I click the link "OracleASFormsReportsServices10g_90401_Windows.exe"
and get
"We're sorry, the page you requested was not found.
We have recorded this error (404) to help us fix the problem.
You may wish to try again using one of the tools below. "
Is this link rot? Is there another place to download from?Try a different browser.
-
I just started a free trial of the Adobe XI product that allows me to create an editable PDF. I'm done creating the form and ready to export it. When I click Export PDF from the File menu, it says Adobe encountered an unexpected error. What am I doing wrong?
Good to know — there is no such application as "Adobe XI".
"Adobe" is the name of the company.
"XI" is indicative of the use of either Acrobat XI or Reader XI.
Neither Acrobat XI Pro (for which Adobe provides a free, fully functional 30-day trial) nor Adobe Reader XI (the free to download and use PDF viewer that Adobe provides) have an "Export PDF" entry under "File".
"Export PDF" only is present in Adobe Reader XI over on the right on the "Tools" panel.
The "Tools" panel provides a way for a user of Adobe Reader XI to connect to various By Subscription online services (gotta pay eh).
Export PDF is one of these. A subscription lets you send a PDF file to the online internet service (aka "cloud" service). The service then exports to a supported file format (Word / Excel / ...) and the user selects / directs where the output file is to be saved on the user's local machine.
Of course to use any of the online subscription services one must have an active (paid up in full) subscription to the service.
So ---- As described the puzzle pieces don't fit eh.
What specific Adobe (the company) applications are you using?
Acrobat XI Pro? Adobe Reader XI? Both?
Be well.... -
Individual, Creative cloud, single app, Adobe Acrobat Pro X1, Forms and Responses allowed
Dear forum,
Firstly many apologies if this is a stupid question or if it has been answered before, but I'm very new to using FormsCentral only in the past few days.
I purchased an Individual Creative cloud, single app plan at £17.58 per month for only Adobe Acrobat Pro X1, I am able it seems allowed to create forms etc, however are there any responses per form limit for my subscription? when looking at the features for the Adobe Acrobat Pro X1 product it only says FormsCentral is included and does not suggest any limitations. However, I've seen other comments which suggest needing to upgrade, but I have not seen any messages asking me to. I would prefer to know the limitations now rather than doing an important project form and then suddenly see messages appear once 50, or so responses have arrived ?
Any help or guidance would be much appreciated.
kind regards
kevinHi,
You get a free subscription with FormsCentral with Acrobat Pro XI. You will only be able to create one form and collect 50 responses. To get more functionality, you'll need to upgrade to basic or plus plan. Please check out Pricing options - Free, Basic, and Plus options | Adobe FormsCentral.
Thanks,
Wenlan -
Simple Q. how to store/publish acrobat form and "return" as email attachment
New to acrobat.com and wondering if this can be done (with acrobat.com).
I have roughly 20 acrobat forms that I want to be accessible on the internet for about 5 specific people to access via the internet. The goal would be for them to click on the acrobat form, fill it out and then "return" it to me as an email attachment. The forms are not complex or long, typically 5 questions to respond to.
So, I signed up for the free buzz option, uploaded a pdf form and saved it in a shared workspace. I see the file (test.pdf) in the all files section. The downward-pointing triangular arrow next to the file gives me the option of open vs download vs share among other choices. I really just want to open, but when I try that it says"this file is a pdf form. Please download the file and use adobe reader to fill out the form and submit your responses". I then click download it then asks for a location (this will be a problem-source of confusion). I save it to a location but that location already has that file and wants to overwrite it-another problem. I quickly see that this is the wrong solution for me.
So, can this be done with acrobat.com or should I be using something like dreamweaver and a personal web site? Thanks in advance.Hello there,
Thank you for your post. What you would like to do is most easily achieved using Acrobat desktop software; this is a well-defined workflow, using Acrobat.com to distribute forms and collect responses, and deliver these responses to the Acrobat Tracker, where you can then analyze them and sort the data. If you're on a Windows machine, I recommend downloading a free 30-day trial of Acrobat Pro software, which you can get here:
http://www.adobe.com/products/acrobatpro/tryout.html
(Unfortunately, there is no trial available for Mac at this time.)
Beyond that, there really isn't a more streamlined way to collect form responses with Acrobat.com; the Acrobat workflow works very well, however, and I encourage you to give it a shot. Here's a video that illustrates how it works:
http://www.adobe.com/designcenter/video_workshop/?id=vid0348
Please let me know if you have any further questions about Acrobat.com, and I will be happy to answer them for you.
Best regards,
Rebecca -
Acrobat forms and shared workspaces
Can acrobat forms be intergrated with shared
workspaces? If so, how?Good day,
Static forms created with Acrobat or LiveCycle Designer can be shared via an Acrobat.com shared workspace. These files can be shared like any other file.
If I've misinterpreted you question, please let me know and I'll try to get the answer for you.
Kind regards,
David
Acrobat Community Manager
Adobe Systems -
Collecting data via SharePoint using LiveCycle form and Adobe Tracker
I created a form in LiveCycle ES 8.2 and have distributed it via Adobe 9.3.4 Pro (I am running Windows 7.) For the first two days, when I opened up track forms, all was working well and I was receiving all responses. However, on the third day, I was not receiving any new responses, so I called up a couple of the people I had distributed the form to to see if they had in fact submitted it, and they had. Everything on their end looked as though the form went through. They received "sucessfully submitted" messages, although I still have not recieved them. So, I went in, created a new distribution with the people that I had not received responses from. Again, I received responses the first day, but have not received a response on any of the following days.
Is anyone else having this same issue?UPDATE
The error that is being received is, "Acrobat cannot connect to the server, but will automatically submit your form once the server is online." Our SharePoint is showing no problems. In addition, I received a new response today out of the blue. But someone tried to resubmit a form and received the "cannot connect" error. -
Adding a field to an Event Booking form and modyfying the results module.
I am trying to use the Events/Booking system to book casual days at a child care centre for a client. I can customise the Events Detail form layout but I need some additional fields and to make some changes to the auto responses.
The form/page is only visible in a secure zone, so the logged in user gets the form submitted against their name. This is fine. However, I need to also capture the name of the child who is being booked in by the adult. Can I add a field to this form and have it recorded in the event bookings. I have tried to add a field, but the data is not captured in the form results.
I also need to modify a few other things about the module:
- the form work flow. Where/how can I set the workflow used for the Event/Booking Submission? It seems to have picked one at random.
- I need to change the text/field names on the form results module on both the email confirmation and the confirmation page.
- it shows "Seats Booked" which in this case is an inappropriate description of the action taken. I need to change this to "Places Requested", or remove it completely.
- it also shows "Booking Confirmed". I need to change this to "Booking Request Received"
- the email confirmation shows a Verify Booking Link at the top of the email. This isn't in the Notification Email template on the Event. How can I remove it?
I can use javascript to hide or search and replace some of the offending tags, but I was hoping that there was a cleaner way.
Any help or suggestions would be greatly appreciated.Hey there,
The form for booking is just a web form, BC treats it differently when in the events page. So under web forms you will find the booking form. You can not just add fields to the html of the form. You need to add them here so they can go into the database.
- The webform workflow can be changed on the web form settings, the workflows are under the site settings and you can create/edit them there.
- You can only have the name of the fields that come out, you do not have much customisation on the email confirmation or the layout. You can not limit or edit the fields.
- You can not use javascript in emails, this is not a BC thing, this is an email/web thing. -
Logical flow between User forms and workflows
Hi,
I want to know the logical flow among jsps,UserForms and workflows in IDM.
This may appear as a silly quest. But I want to know how exctly the workflows are getting excuted when we click the buttons on the forms....
For eg While creating the user after gving the user details in Tabbed User form when we click on save how it is calling Create User Workflow....
where is the link and how its happening.....
If any one know this please reply me....this a quest remaining in my mind since so many days....
Thanks in advance....I dont think, there is any xml codes in any of the forms for calling workflow. One needs to render a form for any workflow. Whenever you hit new User , the create user workflow gets initiated and the form and the default form for create user is Tabbed User Form. activities and forms are mapped according to the authorisation level. If you create any Admin role, then we need to specify a form for the admin's capabilities. I guess for configurator , to create a a new user, the form has to be Tabbed User Form by default. For a custom Lanch user process, one needs to include a form along with the workflow. We can do that. Thats what I know till date.
Thanks,
Manila -
Error starting forms and reports manageed servers on windows server 2008
Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
[2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
[] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
[APP: em] Falta la configuración de registro o no es válida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
any suggestions?
weblogic 10.3.4
forms 11.1.1.4
windows server 2008 x64
JDK :java 6u30 x64delete all, re-install all... ok
-
Forms and Reports 6i connections fail after db upgraded 10gr2
After database upgraded to 10gr2 on 64bit Windows 2008 server, connections from forms and reports 6i hang while sqlplus connections work. After database is restarted, connections to forms and reports work again but only for a few days?
Also if authenication is changed from NTS to NONE, we do not experience any connection problems from forms or reports.
Any suggestions would be appreciated.
ThanksHi!
Is there maybe a database package that gets invalid form some reason?
And if forms/reports tries to connect, the package should get compiled cause of a call
to it and this ends in a endless lock?
Regards
Maybe you are looking for
-
Why are the photos I copied onto a DVD from I-Photo not viewable by a Windows PC?
Why are the photos I copied onto a DVD from iPhoto not viewable on a Windows PC?
-
Reg. Automatic payment program - URGENT!
Hi all, We are creating a validation for the F110. Can somebody tel me where do i enter my header data like th reference and other details? Is there a way to change my parameter screen layout? Kindly guide me on this. Regards Karpagam
-
The font in the iTunes screen is not small enough
The font in the ioTunes screen, as found at http://imagebin.org/165826, are too large for some reason. Anyone out there knows where I can set the font to something smaller? (Not in the iTunes-preferences). It's iTunes on a Win7 box, screen res is 160
-
I've purchased the Universal Dock and the component video cable to hook my iPhone up to my home entertainment system. I can watch video podcasts and TV shows from my iPhone, but I cannot view photo slide shows. What am I doing wrong? All the literatu
-
How do I get ringtone from iTunes to iPhone?
I bought a ringtone from iTunes, but it downloaded itself to 'Music' folder instead of the 'Tones' folder. I can sync it to my iPhone (in the music folder) but cannot select it as a ringtone. Bizarre! In addition, the inflexibility of iTunes means th