ESIC is not deducting correctly

Hi Experts,
I have a query.
Employees who has resigned from the company. His actual pay will not be the same amt. as it is in basic pay.
And esic should deduct on actual amt. and not in the basic pay amount.
but here the situation is that. It is not calculating on basic pay IT amount. And not on Actual amount displayed in RT.
Please help me to solve this issue.
Regards,
R. Arokia Merlin

What pujar said sound good
Please make sure you have dellimited all infotypes what need delimit
best Regards

Similar Messages

Re: Pension Contribution not deducting correctly

Dear Gurus,
When an employee is hired in the mid-month, the Employee and Employer pension contribution is not getting deducted properly.
if the basic is greater than 6000 employer pension should deduct 541. it is not deducting correctly when the joining date is greater than 1st of the month.
Kindly help to sort out this issue.
Thanks
Anbu

For mid-month Hiree and Termination on Savings Plans and Pensions - there are certain SAP notes that need checked. I found one for Savings plan contribution -
0000725626 - Savings/ retirement plan not processed in first period
I have seen another note for India Benefits that may be of help to you.
SAP Note 1160806 -PF and Pension contri.for mid-month joining & termin.
Please verify that these are part of your code line. Although these may be old fixes, it is better to verify rather than assuming ECC6 has these already.
Hope this helps,
Roopa

Pension Contribution not deducting correctly and Arrears

Dear Experts!
I am facing with a big problem with calculation Pension Contribution in India Payroll.
First, the issue with employee join into company in middle month, i have modified EXIT_HINCALC0_002 and it's right.
However, the problem when a employee has an arrears of last month, so my customer requires that: base on /111 + arrears to decide the amount of Pension Contribution.
If /111 + arrears >= 6500 so assigning /3FC = 6500
Else /3FC = /111 + arrears.
But I don't know, how to calculate arrears in FUINEPF to choose the suitable value for /3FC.
Please help me. Thank a lot.

Thank for your reply.
I have read the note and see that: this is the problem when employee joined in the middle month <not from 1st of month>. However, I have fixed this problem. And the result is OK.
The issue now is to decide value of /3FC not only base on /111 but also amount of Arrears. I don't know how to calculate Arrears, especially in FUINEPF.

Esic contribution is not deducting on seperation cases in retro run.

Dear Experts,
Employee was got seperated in previous month (for example Oct) and now while executing retro run (Dec) for those employee ESIC is not contributing even though they comes in esic eligibility.
Please advise.

Yeah, IN42 to 44 are activated,
ZN42 Formation of differences, transfer of n
        WGTYP?     Query wage type
          /3EA
            ELIMI *    Elim.time period ID
            SUBWTD/AEA DT   Difference tab.
ZN43 Store the differences in DT (India)
        WGTYP?     Query wage type
          /3EA
            ELIMI *    Elim.time period ID
            ADDWTD/AEA DT   Difference tab.
            INESR /AEA DT
/AEA
ELIMI *    Elim.time period ID
ADDWTI/ZEA IT   Input table
and only /zea is reflecting in RT

SAP R3 FCC 6.0 - AR Aging FBL5N did not reflect correct balance

AR aging report (S_ALR_87012173 Customer Open Items for printing) or AR Aging T-code FBL5N did not show correcct balance which will show 100% original invoice balance even we applied the partial payment. Anyone has same problem? If not, what caused this probelm since I can not send statment to customers and need do it in Excel. Thanks,

Hi PPIO: I used FBL5N but all partial payment did not deduct from original invoice if you short of 0.01 cent, that is why I am trying other reports from SAP. How you retrieve data and create your customized reports in R3? We will implement BW in April 2012 but do we need any report tool to create our own reports?
Our internal SAP administrator told me the FBL5N can NOT display correct balance due that is can not do task. I can not believe it, Can you teach me why we got incorrect balance due and what caused the problem? Tks.

PS - PO Excise Value not deducted from Project Available Budget

Hello SAP Gurus,
My problem is that when an Excisable PO is created against SAP Project then the Excise Value is not included in Budget - Commitment/Actual Amounts.
PO Basic Value + Tax (VAT/CST) is deducted from Available Budget, but Excise value is not deducted even after Invoice Booking.
Please let me know where do I need to change so that the complete PO value is deducted from Available Budget.

Hi Bindal,
Origin of Project costs lies in other modules.
Pls get you Tax procedure checked by FI/MM. In Tax procedure there will be various Conditions used by your organization. Each Condition type will have an Account Key.
If that account key has 'Non Decutible' checked then the related tax amount will form cost on your project and vice versa.
if your organization is producing something using thses input materials then it would want to benifit itself by taking credit for Modavat/Cenvat against the Excise and other recoverable taxes it paid during the purchase of input materials.
Hence as a correct business practise such taxes will be correctly set as 'Dedutible' in Tax settings so that instead of getting inventorized the'y be offsetted and amount would be posted to some clearing amount.
In short MM would (correctly) not recognize these taxes amounts as cost and thus these values will not flow to PS also as Commitment cost or actual/statistical cost.
with regards,
Ravi Shrivastav

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

10g exporting to CSV using client_text_io is not working correctly.

I have an odd issue which i could do with some help with. I run an function that exports to CSV based on an pre defined record group.
This has been working fine for many months with various customers. Recently a new customer used it and they have 28k rows in his record group and the export is actually not exporting correctly.
The record group has a record count of 28331.
The CSV produced has only 3756 in my CSV file. These are the last 3756 records in the Record group so its as if its overwriting the data as it goes yet all smaller datasets work
FUNCTION fun_export_csv (vgraphid NUMBER, p_filename VARCHAR2)RETURN BOOLEAN IS
out_file                     client_text_io.file_type;
     i                                             NUMBER;
lv_line              VARCHAR2(5000);
BEGIN
rg:=populate_group('RG11_EXP');
synchronize;
lv_line:= ('"GIN","Gin Date","PO Num","PO Required Date","Mat Num","Mat Description","Supplier Part No","On Time Delivery(Yes-1, No-0)"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
For i in 1..get_group_row_count('RG11_EXP') Loop--this count is 28331
lv_line:= ('"'||get_group_number_cell('RG11_EXP.col1', i )                ||'"'|| ',' ||'"'||
     get_group_date_cell('RG11_EXP.grn_date', i )                ||'"'|| ',' ||'"'||
     get_group_number_cell('RG11_EXP.po', i )      ||'"'|| ',' ||'"'||
     get_group_date_cell('RG11_EXP.daterqd', i ) ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.item_no', i ) ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.desc', i )                    ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.part_no', i )               ||'"'|| ',' ||'"'||
     get_group_number_cell('RG11_EXP.ontime', i )                    ||'"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
END LOOP;
client_text_io.FCLOSE(out_file);
RETURN TRUE;

Hello,
Try to insert a "synchronize" instruction from time to time:
i pls_integer := 1;
Loop
If mod(i, 500) = 0 Then
     synchronize;
End if ;
i := i + 1 ;
End loop;
...<p>But keep in mind the the CLIENT_TEXT_IO generate a lot of network traffic, so it is better and faster to generate the file on the A.S., then after transfer it to the client machine.</p>
Francois

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Hyperlinks not saved correctly in PDF and Excel

Hi,
I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ). Therefore the child report opens but prompts for inputs as not all the inputs are passed
When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
Regards
Sameer

Hello,
I think this is a limitation in Excel where URL syntax has to be 255 characters or less
In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
Please let me know if it helps you
Regards,
Philippe

Non-English fonts not rendering correctly in iMovie 10.0.3?

I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.

Hello,
Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
Have a look and see if it can help you.

In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

Hi DirTech,
Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion. (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
Best,
Sara

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

ESIC is not deducting correctly

Similar Messages

Maybe you are looking for