ESR in SPROXY is wrong.

Hi,
In my landscape I have two SAP PI 7.10 integration serverers. SYS_A contains the SLD and SYS_B shares this SLD. Now I have a Business system SAP NW 7.00 as SYS_C, which will be using the integration server SYS_B and the SLD from SYS_A. I have registered all the technical system via tcode RZ70 on all machines above. Then created the appropriate business systems for all the technical systems and linked the software component to these business systems. All this is working fine as the SLDCHECK on all machines checks out fine. So are all the RFC destinations setup and working on all machines.
Now when I log into SYS_C the business system and run tcode SPROXY the it links to SYS_A and not to SYS_B as is setup in the RFC destination for the integration server that needs to be used.
Please can you assist how this can be rectified. I have however seen through the test available in tcode sproxy that with the creation of a RFC with the name SAP_PROXY_ESR one can achieve this. As in the same test area for SPROXY it mentions that the ESR needs to specified in the Exchange Profile, but in this instance SYS_C is reading the ESR values from SYS_A(SLD) and not SYS_B(Integration server) as is intended.
I this how it is normally done?
Regards
Willie Hugo

Hi Willem,
You have to configure your SYS_C as application server of your SYS_B.
Follow this link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/85/0a12417301ee6fe10000000a1550b0/content.htm
hope this helps you.
Carlos

Similar Messages

Enterprise Services in ECC using SPROXY transaction

Dear All,
We were able see the Enterprise Services available in ECC 6.0 EHP 3 using the transaction SPROXY, we have even tested one proxy through this transaction. But now when we have configured ECC to connect the ESR (of PI), it is only showing Software components / Service Interface available in ESR throught the SPROXY transaction in ECC and not showing the Enterprise Services which are available in ECC.
How to see both the things, existing Enterprise Services of ECC and Service Interfaces of ESR through SPROXY transaction in ECC?
please help.
thanks and regards,
Ravi

Hi Ravi,
It may be that you just need a delta cache refresh but I would start by checking the SLD configuration.
First strt with SAP Note: 1169869
- I think that you might need to try changing the vendor (sap.com) that's assigned to the Software Component Version.
- If you were seeing the SWCV before it should be installed on your system anyway but you can double check using the steps I've specified here: [Can't find ESA ECC-SE 603 SWCV;
- You might also want to check if the SWC is correctly assigned to the relevant business system/s in the SLD.
Regards, Trevor

ABAP proxy with Multiple PI system and Single SAP ECC

Hello Folks,
In my current project i have 2 SAP Pi system, PI7.0 and PI7.11. Currently 80% of the interfaces are on PI7.0 and we are planning to move interfaces to new PI7.11 next year. Old environment has lot of ABAP proxies ECC is configured to send data to it.
All the new developments will be done in new SAP and i need to use SAP PI7.11 for that. I have an interface where i need to use ABAP proxy.
How can i configure ECC so that it sends new ABAP proxy interface data to new PI7.11 and old proxies to old PI7.0.
As far as i know we can make ECC point to one integration server at one time. Any thoughts or suggestion ?
Regards
Inder

Hi,
Multiple connection to ESR in sproxy can be done by switching host value in RFC destination SAP_ESR_PROXY and for maintaining multiple PI runtime you should use subparameter for parameter SXMB_ADM->Runtime->IS_URL (you can define combination of Sender/Receiver for subparameter in transaction SXMSIF).
This way for every sender/receiver combination you can use different integration server.
Regards,
Gourav

Changes in ESR not reflecting in SPROXY

Hi All,
We are implementing SRM 7.0 with PI 7.1.
We have a reuiquirement of adding custom fields in the standard message DespatchedDeliveryNotification_Out which is sent from SRM SUS. I have created the data type enhancement in the ESR in the namespace http://sap.com/xi/SRM/SupplierEnablement/Global
for the data type DespatchedDeliveryNotification. But the Data Type Enhancement is not visible in transaction SPROXY in the SRM server.
Even when this did not work, i created a new namespace in s/w comp SAP SRM SERVER and create the Data Type Enhancement in that. The new namespace is visible in SPROXY but the DTE is not.
Is this the way to do it?
Please advise.
Regards,
Karen Pereira

Hello one more time,
This step-by-step blog is exactly what you are looking for:
XI/PI: Data type enhancements (standard Business Partner):
/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
You should do the same only with your standard type.
BR,
Dzmitry

Problems to browse ESR in the ERP (sproxy)

Hi Folks, i´m dealing with this problem and i don´t know where to find more information about. I´m trying to add abap code in the ERP to a modeled service in the ESR.
When i try to browse (trx.sproxy) the development components with its models, nothing happends. I´ve checked the trx.SM59 in the ERP where the SAP_PROXY_ESR has to be configured, and it´s connection test works fine. Is there any other configuration step that i´m forgetting?
Hope anyone can help me with this issue
Thanks in advance.
Regards.
Diego.

Arpit, when i press the lightning button, i get a message of the check list for setting up the ESR connection. Allthe items works fine. no errors.
This is the SM59 config.
RFC destination : SAP_PROXY_ESR
Connection type: G
Technical setting.
Target Host :   ESRhost       service No. ESRhost port
Path Prefix : /rep
Logon &security
Logon procedure : Basic Auth.
SSl : Inactive
SSL:   Cliente Certificate Default Standard
Logon.
User:   esradmin
Pass: xxxxxxx
The issue is that i can´t see any model in the Sproxy
Thanks in advance.
Regards.
Diego.
Edited by: Diego Rodriguez on Feb 26, 2010 2:02 PM

Reversed OL in Firefox ESR 31.1.1 is wrong for more than 53 items

The ESR version of Firefox (31.1.1) finally acknowledges <OL reversed="reversed"> (standard HTML5), but the implementation is only working properly for up to 53 items in the list. If there are more than 53 items, then the list will still start at 53, then count down to 1, then zero and then start on negative numbers...
There must be a bug in how the total number of items in the list is calculated.

hello bjornclausen, if you think it's a problem in the browser's implementation, please file a bug for that issue at bugzilla.mozilla.org.

Enhanced Data Type not visible in SPROXY

Hello experts,
I've enhanced my personal data type with some extra fields...
I activated this and the change can be seen in the Message Type and the Service Interface.
Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
What's wrong? Please advice.
Thanks a lot!
Dimitri

Hi Dimitri,
There should not any problem while generating proxyies again please chek two things in your case
1.Wether the Activation is done prperly or not.
2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
Thread:
Re: Simple questions about proxy
Configutaion guide for checking Proxy connections
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thanks,
Ram.

ES bundles usage (with/without ESR)

Hello Experts,
I am currently working in a landscape comprising of ECC 6.0 EHP4 and APO systems. We do not have SAP PI installation.
I wanted to know the right way forward to get SOA enablement.
I understand that Service enablement is two fold (Please correct me if I am wrong):
1) 'Inside out' (from FMs) for which the WS runtime engine of the AS is sufficient. The services thus generated can be consumed directly from other SAP systems (within our landscape only??) or from a frontend app which can conume services (probably a widget developed in .NET with a cool UI).
2) 'Outside In' where services are modeled in PI/ OR standard SAP services (ES bundles) can be used.
My question , more precisely, is if we need SAP NW PI to use these ES bundles from the service marketplace.
If No, then how can it be done?????
If yes, then do the Business objects to which these services are related to also provided along with this content??? And do these business objects correspond the the ones whihc are available in the Business Object Repository in the backend???
Is there any other alternative to getting SOA enabled without actually having to instal SAP Nwtweaver PI??
I am really looking forward to some interesting answers from the experts on this forum.
Thank you well in advance. Regards,
Amith

>when you said that the landscape should be opened for external connectivity, what did you mean???
It is in response to your remark that you can consume service within your landscape, by this statement I meant that external consumer (means outside your landscape) can also use your services provided your system is available on internet or port for external connectivity is opened (ignore this if your requirement is only A2A communication within your landscape).
>Secondly, do the Enterprise services from ES bundles, that as you mentioned are already in my ECC system, have an implementation already? If yes then can I modify the implementation class to suit my requirements?
Since they will be standard service (although referencing exisiting BAPIs) you probably won't able to modify them directly, better do it by writing user-exit or wrapper BAPI.
>I looked in SPROXY (ES Browser) and found a few services but they are not the ones from the ES bundles I think OR are they??. Can you please let me know under which grouping in SICF would I find these services?If not SICF then under which package in SE80 would I find them?
You need to activate service in order to view them in sproxy (if sproxy is connected to external system like PI then you will be able to see services which is only available in PI).
In SICF browse sap->bc->srt->xip->sap to see services name of service will be something like ECC_xxxxxx
If no service available here then you need to download services from SMP (contact your basis team).
In SE80 goto "Repository Information System" chose Enterprise Services->service definition and search for all services, you will the list of all services in your system.
>I want to know about the business objects that these services correspond to in the model (in ESR). For ex, if I consider CreateSalesOrder_In service, would it update the relevant Sales Order tables (VBAK, VBAP etc) in the backend? Are these business objects related to the Business Objects found in the BAPI transaction?
I can't tell you which BO update which table but they use existing SAP functionality so for enduser the endresult is same.
Hope this answers your queries.
Regards,
Gourav Khare

Flash 12.0.0.77 plugin installs to wrong folder

In Vista x64, using either Firefox 28 or Firefox 24.4 ESR, the plugin installer (one downloaded from Adobe distribution) installs the 32 bit .dll file to \system32\macromedia\flash\ folder;
installs the 64 bit .dll to: \sysWOW64\macromedia\flash\ folder. So, they're exacly reversed.
I uninstalled it completely - went well. Then removed 1 remaining file in one of the above paths, then reinstalled. Did the same thing.
Before I did all this - I was *very sporadically* seeing the FlashPlayerPlugin_12_0_0_77.exe file, running (kinda "sitting") in background, in task manager. It never came to foreground w/ a UI, asking for anything. Couldn't figure out what it was, until started looking in the installation folders.
That's what lead to discovery the files were in wrong folders.
Anyone heard of this?
BTW, "Nayana" of Adobe Support chat, is a few bricks shy of a load. Or I am. I couldn't create an acct for forums. She kept saying, you don't need an acct - "just post your question. Other people will answer it."

EDIT: Seems there's no error in Flash installing to wrong folders, only error in my brain. Why didn't someone stop me from embarrassing myself?
System32 (in a 64 bit OS / architecture) is for 64 bit drivers, files; SysWOW64 is for 32 bit apps running in 64 bit OS.
https://en.wikipedia.org/wiki/WoW64
WoW64 (Windows 32-bit on Windows 64-bit) is a subsystem of the Windows operating system capable of running 32-bit applications and is included on all 64-bit versions of Windows
Also, http://www.samlogic.net/articles/32-64-bit-windows-folder-x86-syswow64.htm (section on SysWoW64)
End Edit.
Thanks for info on attaching images. A bit different than most forums. There's no "preview post" before submitting?
Screenshots of the 2 flash folder contents.
NOTE: I attached full FlashInstall.log earlier. I opened the 1.25 MB (text) file in an editor - copied contents to clipboard > paste to forum reply screen. Immediately locked up Firefox like a big dog. Couldn't perform any functions in Fx - not even reload or close browser. At same time, Fx memory use was continually climbing; to nearly 2 GB when I killed it. Won't make that mistake again.
Been many yrs since Fx locked up, doing anything. That aside, Adobe is definitely "different" than most forums. Almost like a person w/ no $ to use one of the many forum softwares available.
Most recent Flash installation logs.
C:\Windows\SysWOW64\Macromed\Flash\FlashInstall.log:
=O====== M/12.0.0.77 2014-03-27+18-59-59.282 ========
0000 [I] 00000010 "C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe" -maintain plugin
0001 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0002 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0003 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0004 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0005 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0006 [W] 00001021
0007 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0008 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0009 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0010 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0011 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 2
0012 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0013 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0014 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0015 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0016 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0017 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0018 [W] 00001036 Software\Opera Software/Last CommandLine 2
0019 [W] 00001036 Software\Opera Software/Last CommandLine 2
0020 [W] 00001036 Software\Opera Software/Plugin Path 2
0021 [W] 00001036 Software\Opera Software/Plugin Path 2
0022 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0023 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0024 [I] 00000011 1
0025 [I] 00000012
=X====== M/12.0.0.77 2014-03-27+19-00-34.066 ========
=O====== M/12.0.0.77 2014-03-27+19-15-43.835 ========
0000 [I] 00000010 "E:\DOWNLOADS\Software\Multi Media\Browser PLUGINS\Flash Player\Flash Player Fx\install_flash_player_12.0.0.77_plugin002.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0004 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0005 [I] 00000011 1
0006 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0007 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0008 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0009 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0010 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0011 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0012 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0013 [W] 00001036 Software\Opera Software/Last CommandLine 2
0014 [W] 00001036 Software\Opera Software/Last CommandLine 2
0015 [W] 00001036 Software\Opera Software/Plugin Path 2
0016 [W] 00001036 Software\Opera Software/Plugin Path 2
0017 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_12_0_0_77.dll
0018 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe
0019 [I] 00000024 C:\Windows\SysWOW64\Macromed\Flash\plugin.vch
0020 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0021 [I] 00000022 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_12_0_0_77.exe
0022 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0023 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
=X====== M/12.0.0.77 2014-03-27+19-16-11.879 ========

I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

# Question
I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
Did you try my suggestion of installing portable ESR ?
For forum cross referencing purposes
* Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
*(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
* Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
*I note this was first seen in Fx21 and is 100% Windows 7
<br />

Not able to see Enhanced Data type in SPROXY in SRM

Hello Experts,
We are planning to use an outbound (SRM to PI) Proxy between SRM and PI to send XML messages. Our SRM team has requested a Datatype enhancement of SAP's predelivered SCV, SAP SRM SERVER 7.0 component i.e. RFQRequest. So, In ESR we have created a new Enhanced data type based on RFQMessage (SAP's pre delivered datatype). I've added their (SRM team's) 6 extra elements to this new Enhanced Data Type, RFQMessageExtension. And, saved and activated it.
Now, to generate the Proxy I went into SRM -> SPROXY, but I donu2019t see my Enhanced Datatype, RFQMessageExtension. Please let me if you've come across this problem or know the solution. I was following this blog [/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner|/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner]
Thanks,
Mayur

Hi Mayur,
Have you read this article?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d
Regards,
Ravi kanth talagana

Component SAP ABA 7.02 does not show up in sproxy in CRM 7.0 EhP 1

We upgraded our CRM system from CRM 7.0 to CRM 7.0 EHP 1.
This involved an upgrade from NetWeaver 7.01 to 7.02, i.e. also ABA 7.01 to 7.02.
In sproxy in the CRM system we can only see
SAP CRM ABAP 7.0
SAP_BS_FOUNDATION 702
various custom software components.
SAP ABA 7.02 with the interfaces for e.g. business partner distribution is missing.
(When switching to the local view, they are shown and BP replication works.)
So I went into the SLD and looked at the technical system for CRM. Indeed the product "SAP NetWeaver SAP EhP 2 for SAP NetWeaver 7.0" was not marked as installed. So I added it. On the right-hand side under Software Component Versions "SAP ABA 7.02" is now listed.
i then went to the business system for one of the clients and also selected the product "SAP NetWeaver SAP EhP 2 for SAP NetWeaver 7.0" there and I can see the SWCV "SAP ABA 7.02".
I tried restarting both the PI and the CRM instances.
Nevertheless in sproxy in CRM nothing changed.
What else could be missing?

senthilprakash selvaraj wrote:
> To be very specific,
>
> Login to SAP CRM system.
> Goto: SYSTEM-->status
>
> In there under SAP SYSTEM DATA group, you will be able to see a "Magnifying Lens" icon just below Component Version field --> click it
>
> there you will be able to see the exact version&level of the component.
Yes, that's where I copied that line
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
from.
senthilprakash selvaraj wrote:
> Now ask your basis team to deploy the same version&level in SAP PI as its shown in the CRM system.
Ah, the PI/XI content could be missing, even if this shows up in the list of products and software component versions in the SLD?
I have just checked in the ESR, that seems to be the problem, thanks.
senthilprakash selvaraj wrote:
> Note: Thou the release version might be same, the level of the component deployed in both the system might be different. hence the problem.
You mean if the service pack is different? I doubt that this would result in the SWCV not showing up in sproxy.
Monika.

SPROXY not working in application system

Hello all,
I have been trying to make SPROXY work in my QAS ERP 2004 SPS23 system
for a few days now but I can not make it. I have
configured SPROXY in the past for my sandbox and DEV system with
success but I do not seem to have any luck in QAS.
My PI landscape consists of sandbox, developement, qa and production
systems. The version is PI 7.0 SPS21
My ERP landscape consists of the same 4 systems but in version 6.40 -
ERP 2004 SPS23
All non production systems use a central SLD that runs in the PI development
box (PID)
The error message I get is as follows:
When I run SPROXY in ERP QAS client 330, I get : "No connection to Integration
Builder (only local data visible)"
When I do Goto --> Integration Builder, I get the message "Integration
Builder address not maintained"
However, when I do Goto --> Connection Test, from the 4 reports I have
to run, two work and two do not work:
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS works and shows the correct address for Integration repository
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION works
The other two reports
=>Check with report SPROX_CHECK_IFR_RESPONSE
==>Check with report SPROX_CHECK_IFR_CONNECTION
return: Integration builder data not undestood.
SLDCHECK runs fine: All green and invokes correct IE session with the correct SLD URL (central SLD)
SLDAPICUST shows the correct SLD (central)
SXMB_ADM --> Integration Engine Configuration shows the destination RFC
SAPIS_PIQ
which is defined in SM59 as type H and works fine
TCP RFCs LCRSAPRFC and SAPSLDAPI work
The corresponding JCos in Visual Administration look ok
I have registered the queues in SXMB_ADM and they registered ok .
The /sap/xi/engine service is active in both the application system and the PI system (QAs and PIQ)
Finally the exchange profile settings in PIQ are fine as well
com.sap.aii.connect.repository.name : piqas.finance.local
com.sap.aii.connect.repository.httpport : 50000
com.sap.aii.connect.repository.contextRoot :rep
com.sap.aii.connect.integrationbuilder.startpage.url : rep/start/index.jsp
com.sap.aii.applicationsystem.serviceuser.name: PIAPPLUSER
and the password is set.
PIAPPLUSER is service user and is not locked.
I have tested SLDCHECK in PIQ and SLDAPICUST and they look ok as well.
Any other clues? Any way I can investigate further via checking logs
and traces to find out what is wrong?
The "Data not understood" message is not helping me much in determining
what is wrong
Many thanks
Andreas

Hi Andreas,
Please go through the below blog which explains you step by step in proxy connectivity.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Naveen.

Can't see whats wrong? help

Hi i've made an applet that has 12 buttons on it, and when the user presses 4 buttons it is stored in an array called myList. Each time a button is pressed sequenceCheck method i created gets called. This has a list of the possible correct combinations that the user could press the buttons in. I have 23 solutions so far. Most of them are working fine however any solution that has the button10, button11 or button 12 in it doesn't seem to work? And i'm not sure why? I've looked at the code over and over and can't see what i've done wrong.
Solutions that don't seem to work are: solution 3, solution 7, solution 8, solution 9, solution 11, solution 13, solution 16, solution 17, solution 18, solution 18, solution 19, solution 20, solution 22 and solution 23. Sll of which have ethier button 10, button 11 or button 12 in it?
If anyone can see what i've done it would really appreciate the help.
package stampGame;
// Description:
// Directory: c:\myjava\teaching
// Date: 5/4/00
// Uses:
// Comments: note the convenient use of the Point object for
// manipulating coordinates
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
import java.util.*;
import javax.swing.JOptionPane;
public class StampGame extends Applet implements ActionListener{
     final int N= 12;
     final int P = 3;
     final int Q = 3;
     String[] buttonLabel = {"1","2","3","4","5","6","7","8","9","10","11","12"};
     Button[] button = new Button[N];
     private int combinationsFound = 0;
     ArrayList<String> myList = new ArrayList<String>();
     ArrayList<String> solutionsFound = new ArrayList<String>();
     public void init(){
          setBackground(Color.blue);     // Applet background color
          setLayout(null);
          System.out.println(myList);
          for(int i=0; i<N; ++i)
               button[i] = new Button(buttonLabel);
               button[i].setFont(new java.awt.Font("Dialog", 1, 24));
               button[i].setBackground(Color.white); // buttons colour
               button[i].addActionListener(this);
               add(button[i]);
     public void paint (Graphics g){
          Insets a = insets();
          button[0].reshape(10+a.left,10+a.top, 100,100);
          button[1].reshape(110+a.left,10+a.top, 100,100);
          button[2].reshape(210+a.left,10+a.top, 100,100);
          button[3].reshape(310+a.left,10+a.top, 100,100);
          button[4].reshape(10+a.left,100+a.top, 100,100);
          button[5].reshape(110+a.left,100+a.top, 100,100);
          button[6].reshape(210+a.left,100+a.top, 100,100);
          button[7].reshape(310+a.left,100+a.top, 100,100);
          button[8].reshape(10+a.left,200+a.top, 100,100);
          button[9].reshape(110+a.left,200+a.top, 100,100);
          button[10].reshape(210+a.left,200+a.top, 100,100);
          button[11].reshape(310+a.left,200+a.top, 100,100);
          g.drawString("Number of combinations found: " + combinationsFound, 500, 100);
     public void actionPerformed(ActionEvent e) {
          // TODO Auto-generated method stub
          if(e.getSource() == button[0]){
               System.out.println("one");
               myList.add("button1");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[1]){
               System.out.println("two");
               myList.add("button2");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[2]){
               System.out.println("three");
               myList.add("button3");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[3]){
               System.out.println("four");
               myList.add("button4");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[4]){
               System.out.println("five");
               myList.add("button5");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[5]){
               System.out.println("six");
               myList.add("button6");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[6]){
               System.out.println("seven");
               myList.add("button7");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[7]){
               System.out.println("eight");
               myList.add("button8");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[8]){
               System.out.println("nine");
               myList.add("button9");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[9]){
               System.out.println("ten");
               myList.add("button10");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[10]){
               System.out.println("eleven");
               myList.add("button11");
               System.out.println(myList);
               sequenceCheck();
          if(e.getSource() == button[11]){
               System.out.println("twelve");
               myList.add("button12");
               System.out.println(myList);
               sequenceCheck();
     public void sequenceCheck(){
          //ArrayList<String> solutionsFound = new ArrayList<String>();
          ArrayList<String> solution1 = new ArrayList<String>();
          ArrayList<String> solution2 = new ArrayList<String>();
          ArrayList<String> solution3 = new ArrayList<String>();
          ArrayList<String> solution4 = new ArrayList<String>();
          ArrayList<String> solution5 = new ArrayList<String>();
          ArrayList<String> solution6 = new ArrayList<String>();
          ArrayList<String> solution7 = new ArrayList<String>();
          ArrayList<String> solution8 = new ArrayList<String>();
          ArrayList<String> solution9 = new ArrayList<String>();
          ArrayList<String> solution10 = new ArrayList<String>();
          ArrayList<String> solution11 = new ArrayList<String>();
          ArrayList<String> solution12 = new ArrayList<String>();
          ArrayList<String> solution13 = new ArrayList<String>();
          ArrayList<String> solution14 = new ArrayList<String>();
          ArrayList<String> solution15 = new ArrayList<String>();
          ArrayList<String> solution16 = new ArrayList<String>();
          ArrayList<String> solution17 = new ArrayList<String>();
          ArrayList<String> solution18 = new ArrayList<String>();
          ArrayList<String> solution19 = new ArrayList<String>();
          ArrayList<String> solution20 = new ArrayList<String>();
          ArrayList<String> solution21 = new ArrayList<String>();
          ArrayList<String> solution22 = new ArrayList<String>();
          ArrayList<String> solution23 = new ArrayList<String>();
          Collections.sort(myList);
          // SOLUTION ONE
          solution1.add("button1");
          solution1.add("button2");
          solution1.add("button3");
          solution1.add("button4");
          System.out.println("Solution 1 = " + solution1);
          // SOLUTION 2
          solution2.add("button5");
          solution2.add("button6");
          solution2.add("button7");
          solution2.add("button8");
          System.out.println("Solution2 = " + solution2);
          // SOLUTION 3
          solution3.add("button9");
          solution3.add("button10");
          solution3.add("button11");
          solution3.add("button12");
          System.out.println("Solution3 = " + solution3);
          // SOLUTION 4
          solution4.add("button1");
          solution4.add("button2");
          solution4.add("button5");
          solution4.add("button6");
          System.out.println("Solution4 = " + solution4);
          // SOLUTION 5
          solution5.add("button3");
          solution5.add("button4");
          solution5.add("button7");
          solution5.add("button8");
          System.out.println("Solution5 = " + solution5);
          // SOLUTION 6
          solution6.add("button2");
          solution6.add("button3");
          solution6.add("button6");
          solution6.add("button7");
          System.out.println("Solution6 = " + solution6);
          // SOLUTION 7
          solution7.add("button5");
          solution7.add("button6");
          solution7.add("button9");
          solution7.add("button10");
          System.out.println("Solution7 = " + solution7);
          // SOLUTION 8
          solution8.add("button7");
          solution8.add("button8");
          solution8.add("button11");
          solution8.add("button12");
          System.out.println("Solution8 = " + solution8);
          // SOLUTION 9
          solution9.add("button6");
          solution9.add("button7");
          solution9.add("button10");
          solution9.add("button11");
          System.out.println("Solution9 = " + solution9);
          // SOLUTION 10
          solution10.add("button1");
          solution10.add("button2");
          solution10.add("button6");
          solution10.add("button7");
          System.out.println("Solution10 = " + solution10);
          // SOLUTION 11
          solution11.add("button5");
          solution11.add("button6");
          solution11.add("button10");
          solution11.add("button11");
          System.out.println("Solution11 = " + solution11);
          // SOLUTION 12
          solution12.add("button2");
          solution12.add("button3");
          solution12.add("button7");
          solution12.add("button8");
          System.out.println("Solution12 = " + solution12);
          // SOLUTION 13
          solution13.add("button6");
          solution13.add("button7");
          solution13.add("button11");
          solution13.add("button12");
          System.out.println("Solution13 = " + solution13);
          // SOLUTION 14
          solution14.add("button2");
          solution14.add("button3");
          solution14.add("button5");
          solution14.add("button6");
          System.out.println("Solution14 = " + solution14);
          // SOLUTION 15
          solution15.add("button3");
          solution15.add("button4");
          solution15.add("button6");
          solution15.add("button7");
          System.out.println("Solution15 = " + solution15);
          // SOLUTION 16
          solution16.add("button6");
          solution16.add("button7");
          solution16.add("button9");
          solution16.add("button11");
          System.out.println("Solution16 = " + solution16);
          // SOLUTION 17
          solution17.add("button7");
          solution17.add("button8");
          solution17.add("button10");
          solution17.add("button11");
          System.out.println("Solution17 = " + solution17);
          // SOLUTION 18
          solution18.add("button1");
          solution18.add("button5");
          solution18.add("button6");
          solution18.add("button10");
          System.out.println("Solution18 = " + solution18);
          // SOLUTION 19
          solution19.add("button2");
          solution19.add("button6");
          solution19.add("button7");
          solution19.add("button11");
          System.out.println("Solution19 = " + solution19);
          // SOLUTION 20
          solution20.add("button3");
          solution20.add("button7");
          solution20.add("button8");
          solution20.add("button12");
          System.out.println("Solution20 = " + solution20);
          // SOLUTION 21
          solution21.add("button2");
          solution21.add("button5");
          solution21.add("button6");
          solution21.add("button9");
          System.out.println("Solution21 = " + solution21);
          // SOLUTION 22
          solution22.add("button3");
          solution22.add("button6");
          solution22.add("button7");
          solution22.add("button10");
          System.out.println("Solution22 = " + solution22);
          // SOLUTION 23
          solution23.add("button4");
          solution23.add("button7");
          solution23.add("button8");
          solution23.add("button11");
          System.out.println("Solution23 = " + solution23);
          System.out.println("buttons pressed = " + myList);
          System.out.println("solutions found = " + solutionsFound);
          Collections.sort(myList);
          if(myList.equals(solution1)){
               if(solutionsFound.contains("solution1")){
                    JOptionPane.showMessageDialog(null, "Combinations already found");
                    myList.clear();
               else {
                    combinationsFound++;
                    JOptionPane.showMessageDialog(null, "Winner");
                    myList.clear();
                    repaint();
                    solutionsFound.add("solution1");
                    System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution2)){
                    if(solutionsFound.contains("solution2")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution2");
                         System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution3)){
               if(solutionsFound.contains("solution3")){
                    JOptionPane.showMessageDialog(null, "Combinations already found");
                    myList.clear();
               else {
                    combinationsFound++;
                    JOptionPane.showMessageDialog(null, "Winner");
                    myList.clear();
                    repaint();
                    solutionsFound.add("solution3");
                    System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution4)){
                    if(solutionsFound.contains("solution4")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution4");
                         System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution5)){
                    if(solutionsFound.contains("solution5")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution5");
                         System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution6)){
                    if(solutionsFound.contains("solution6")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution6");
                         System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution7)){
                    if(solutionsFound.contains("solution7")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution7");
                         System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution8)){
                    if(solutionsFound.contains("solution8")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution8");
                         System.out.println("solutions found = " + solutionsFound);
               else if(myList.equals(solution9)){
                    if(solutionsFound.contains("solution9")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution9");
                         System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution10)){
                    if(solutionsFound.contains("solution10")){
                         JOptionPane.showMessageDialog(null, "Combinations already found");
                         myList.clear();
                    else {
                         combinationsFound++;
                         JOptionPane.showMessageDialog(null, "Winner");
                         myList.clear();
                         repaint();
                         solutionsFound.add("solution10");
                         System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution11)){
     if(solutionsFound.contains("solution11")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution11");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution12)){
     if(solutionsFound.contains("solution12")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution12");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution13)){
     if(solutionsFound.contains("solution13")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution13");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution14)){
     if(solutionsFound.contains("solution14")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution14");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution15)){
     if(solutionsFound.contains("solution15")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution15");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution16)){
     if(solutionsFound.contains("solution16")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution16");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution17)){
     if(solutionsFound.contains("solution17")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution17");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution18)){
     if(solutionsFound.contains("solution18")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution18");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution19)){
     if(solutionsFound.contains("solution19")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution19");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution20)){
     if(solutionsFound.contains("solution20")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution20");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution21)){
     if(solutionsFound.contains("solution21")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution21");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution22)){
     if(solutionsFound.contains("solution22")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution22");
          System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution23)){
     if(solutionsFound.contains("solution23")){
          JOptionPane.showMessageDialog(null, "Combinations already found");
          myList.clear();
     else {
          combinationsFound++;
          JOptionPane.showMessageDialog(null, "Winner");
          myList.clear();
          repaint();
          solutionsFound.add("solution23");
          System.out.println("solutions found = " + solutionsFound);


From [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html]
[Volume is not precision|http://www.catb.org/~esr/faqs/smart-questions.html#volume] :
You need to be precise and informative. This end is not served by simply dumping huge volumes of code or data into a help request. If you have a large, complicated test case that is breaking a program, try to trim it and make it as small as possible.
This is useful for at least three reasons. One: being seen to invest effort in simplifying the question makes it more likely you'll get an answer, Two: simplifying the question makes it more likely you'll get a useful answer. Three: In the process of refining your bug report, you may develop a fix or workaround yourself.
Also please read up on god-objects (wikipedia has a write up on this) which is cured by dividing and conquering. Finally, you really need to simplify this code by using loops with your arrays. You can shorten this beast by over 70%, easy making it much, much easier to debug.
Edited by: Encephalopathic on Mar 30, 2008 6:59 AM

Data Type Enhancement not visible in SPROXY

Hi All,
We are implementing SRM 7.0 with PI 7.1.
We have a reuiquirement of adding custom fields in the standard message DespatchedDeliveryNotification_Out which is sent from SRM SUS. I have created the data type enhancement in the ESR in the namespace http://sap.com/xi/SRM/SupplierEnablement/Global
for the data type DespatchedDeliveryNotification. But the Data Type Enhancement is not visible in transaction SPROXY in the SRM server.
Is this the way to do it? Or there is some different method to be followed?
Please advise.
Regards,
Karen Pereira

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

ESR in SPROXY is wrong.

Similar Messages

Maybe you are looking for