ESR: Message mapping tab is missing for my user id.

Friends,
I am not able to see Message mapping tab in ESR under namespace.
This issue is only with my user id.
Can you suggest if some roles required , or I can contact Basis guys for this.
Thanks,
Divyesh

Hi check below URL,before that you can compare your user id roles with other user id .then you can easily know that,, use SU01 tx for the same.
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards,
Raj

Similar Messages

Content Administration Tab is missing for administrator user in NW CE 7.1

we have a issue after upgrading the portal to NW CE 7.1 SP00 RTC.
"Content Administration" Tab is missing for administrator users

In CE version, we have to manually enable by using "Content Layer Tool"
http://<host>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
This link may lead to "Portal Runtime Error" because "contentLayerTool" is port of high_safety zone
To access without runtime error, pls follow the below process.
1. login http://<host>:<port>/irj with admin user
2. concatenate the below line to browser
/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
3. To enable content admin tab click "Activate Development Mode"

WinX missing for domain users (Windows Server 2012/R2, Windows 8/8.1)

Hi,
I recently created a discussion about a Winx (Right Click) issue that I have in my environment. For windows servers 2012/2012 R2 and windows 8/8.1, I don't have the right click menu.
I don't use roaming profiles. The workaround is to manually copy the Winx folder for each user who log on but I would like to understand why it doesn't work.
Here is the previous discussion I created.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e80c369-242f-47ba-bd22-aafb9b0a6072/winx-missing-for-domain-users?forum=winserverManagement#ab6deeb2-cbcd-4147-a871-4c76d4cb37af
I really appreciate your help.
Thanks

Hi,
I could not reproduce the issue.
When i log in the Windows Server 2012 with domain user, the WinX folder already exists ans the Right Click is ok.
So you could create a new domain user to check the result.
Regards.
Vivian Wang

Message mapping tab works fine ,runtime exception

Hi ,
Need some advice... I get a runtime messge mapping error ( system error) failing the substring logic although when i download the same payload and run in test tab it works fine. Has anyone encountered similar issue ?
Thank you.

objects are active.Your second point is good ,but this error only happens when a load test is done , partciular messages throw runtime exception and fail in mapping on substring logic but when the same payload is downloaded and run via message mapping tabl it runs through. i will try disabling the substring logic nodes.
Secondly when i get a runtime exception ,i try to restart the same message and it goes thorugh successfully. So restarting in moni helps.... but does not explain why....
Thanks
Edited by: xi project on May 18, 2010 12:28 AM

Message mapping - lower node condition for top node

Hello,
E1EDK03
     SEGMENT
     IDDAT
     DATUM
     UZEIT
I would like to have only the E1EDK03s, where IDDAT is 002. So I tried to do it this way on the E1EDK03 level:
Constant 002 and IDDAT --> equalS than E1EDK03-->E1EDK03. But somehow it doesn't work. I also attached a picture of my message mapping.
Would be nice if somebody could help me.

Thx for your help. I tried it with Mr. Gandepallis approach and it worked perfectly.
3 E1EDK03 nodes - perfect.
Now I would like to take it a little further. Let's say I would like to have only the E1EDK03 for IDDAT 025 if QUALF 008 exists in the node above E1EDK03. I tried it with "equalS" and "And", but it's not working.
Would be nice if someone would have a solution for this. I really appreciate your help.

RFC Lookup's in message mapping fail with RuntimeException for no reason

Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
Evaggelos

Hi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo

How to disable tabs in titlebar for all users?

I want to disable tabs in title bar for all users, because looks ugly http://i57.tinypic.com/33nkm77.png
I type to C:\Program Files\Mozilla Firefox\defaults\pref\local-settings.js
pref("browser.tabs.drawInTitlebar", false);
It doesn't work, but any other options in this file works fine.
Setting with about:config works fine, but only for currrent user.

I think that preference refers to what happens when you have Firefox maximized and you do not display either the classic menu bar or the title of the page in that area: the tabs slide up to the top.
I agree the double-high blue area is irritating. To modify that, I think you need to do one of these:
* Change the Windows XP color theme (I always preferred Silver)
* Create a custom style rule to modify the appearance of the tab bar (so the blue does not show through it)
* Find a Firefox theme that fixes that area (e.g., [https://addons.mozilla.org/firefox/themes/])
I haven't researched the second and third options in detail.

Message to be make error for specific user id

Hi Experts,
I have converted message 06 28 to error to not allow to create PO in back date. Now i want to allow some User ID's to create PO in back date. Is it possible ??
Regards,
Manish Jain

Yes. Use versions function.
After having saved the message categories as different versions, you can assign a version to certain users. This results in the same message appearing as an error message for one user, but as warning for another.
For this purpose, you must assign the parameter ID "MSV" and the version number to the relevant user master records.

When I try to play a dvd Macbook Pro I get a box with the message,This function is only for activated users. To activate go to Preferences and Donate" That took me to Mr. Gecko"s Facebook page wanting me to donate $1.99! Does any one know what this is? H

When I try to play a dvd on my Macbook Pro I get a box with the message " This is only for activated users. To activate go to preferences,donate" this takes me to Mr. Gecko's facebook page asking me to donate $1.99-$4.99.
Any clues on what this is, and/or how to bypass it? If I can report this to someone? Thanks

Sure sounds like malware, unles you installed something from a questionable site, then it's still malware but in a payware form as playing DVDs is free on Mac's.
Unless the DVD has software on it perhaps?
Does this work on any movie DVD or is this a special kind of DVD with software on it from someplace?

ESS - Create Expense Report Link is missing for few users

Hi,
We are on ECC 6.0 Ehp 3 with EP 7.0.
We are using the ESS and in that Standard SAP provided Travel and Expenses Module.
For few of the users, the Create Expense Report link is missing eventhough the user is assigned with the Traveller Role
SAP_FI_TV_TRAVELER
Request you to let me know if any setting needs to be done in the back end/infotype to make the Create Expense Report link visible in the portal.
Appreciate your help.
Thanks and Regards,
Sekar

Hello,
Same happened on our side. User is already set with the proper roles, with the correct info types but when logging in the Portal- she, too, could not view the link for Create Expense Report (which is supposed to Create an expense report for a trip without a travel plan).
When i use my userid, and just switch personnel number to her number, I could create an expense report on her behalf.
That made me conclude that her traveller roles are fine.
Pls help.

WinX missing for domain users

Hi,
I currently deploy some Windows Server 2012 R2 in a test environment and I have a strange issue.
If I logon with a local user, I can use (Win+X) or the "menu" when I right click on the Windows icon.
With a domain account, I don't have anything...
If I copy the folder C:\Users\Administrator\AppData\Local\Microsoft\Windows\WinX to my profile, it works but I don't understand why I have to do that manually (or with a logon script) for each user.
For information, I don't use roaming profile.
Am I missing something?
Is it a normal behavior or a bug ?
Thank you

Hi,
Based on your description, I understand that you can’t see a context menu when click “Win+X” keys.
à
If I logon with a local user, I can use (Win+X) or the "menu" when I right click on the Windows icon. With a domain account, I don't have anything...
Would you please use another domain user account (or domain administrator account) to logon and then check
if encounter the same issue?
à
If I copy the folder C:\Users\Administrator\AppData\Local\Microsoft\Windows\WinX to my profile, it works
Did you mean that the WinX folder wasn’t existed when this issue occurred? This issue seems to be caused by
the corrupted or missing WinX folder. Please refer to following thread and check if can help you.
Problems
with new start button right-click context menu
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Fonts missing for random users on random computers

Hello, We're running network home folders (10.4.9 and 10.4.10 client - 10.4.10 server) and recently there's been weird issue with fonts for certain users on certain computers disappearing.
These users can use other computers and other users can use these computers without a problem, but something with the specific user on the specific computer is screwing with the fonts. You can see them all in /Library/Fonts, but when a word processing app is used (Word, Appleworks, iWork, etc), the font list has only about 20 fonts.
Anybody have any ideas?

Hi
On the Server create a folder in the Shared Items folder and call it Library, create another folder within that folder and call it Fonts. Copy all the fonts you wish your network users to use into that folder. Launch Server Admin and make sure Guest Access is enabled for the AFP Service. Go back to WGM and share that folder and use standard POSIX to apply permissions. Make admin the Owner with Read/Write privs, admin as the Group with Read Only privs and Everyone with Read Only privs.
By default when you create new share point, Guest Access is enabled for AFP and SMB. Leave these as they are. You disable FTP sharing if you wish. Select Network Mount and authenticate using the Directory Administrator account. Enable Network Mounting of the newly created share point and set it for Shared Library Use.
For the setting to take effect restart the clients.
Tony

Breadcrumb - is Missing for different User

hi
when i logged in as a administrator, i can view the breadcrumb its working superb. But when i logged in as a different user. the breadcrumb is missing.
I am using custom master page, where my breadcrumb is located.









thx in advance

This is usually some kind of authentication issue.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Trash sounds missing for one user

Whenever I put something into the Trash or empty it the system trash sounds no longer seem to work.
Both Trash sounds work with other user accounts but not with mine which is the main Admin account.
All other system alert sounds work OK on my account - it is only the Trash sounds that do not.
I have tried repairing permissions and re-installing the 10.4.10 combo update but to no avail.
Anybody have any clues?
Edit: This is on my intel iMac
Message was edited by: Adam Rickets

I also have lost sound related to emptying the trash (and possibly others), but only from some accounts.
I have verified the "play user interface sounds" is checked.
I notice that even in the sound control panel when I move the "Alert volume" slider there is no confirming sound, but there is when I adjust the slider for "output volume".
How did you "empty the cache in the library"?

Missing message mapping in SXMB_MONI

Hi All,
I am doing a mapping from XI to 2 receivers CRM proxy and JMS adapter.
When I executed the whole process, I can see success flags in both XI MONI with 2 nodes one for receiver grouping and other for response. The request message mapping node is missing. When i checked CRM MONI for the same message, the inbound message payload is blank. What could be the reason for the missing message mapping IN sxmb_moni.
Thanks

Hi,
Are you copying the source xml from message test tab to trigger the scenario.
If so you need to remove <messages> <message> node from the input type.
Always the root of your input xml should be your message type name.
Regards,
P.Venkat

ESR: Message mapping tab is missing for my user id.

Similar Messages

Maybe you are looking for