ESR objects after re-importing SWCV into ESR from SLD
We created two SWCVs in SLD and imported into ESR.
I_MYCOMP_SWCV_ONE
I_MYCOMP_SWCV_TWO
I created few design objects like DTs MTs SIs like dtA, dtB, siC in I_MYCOMP_SWCV_TWO
but later, for some reason, to enable usage of objects of I_MYCOMP_SWCV_ONE to be used/referenced in I_MYCOMP_SWCV_TWO, we had to create dependencies in sld, something like I_MYCOMP_SWCV_TWO depends on I_MYCOMP_SWCV_ONE,
after we defined the dependency in sld, the SWCVs need to be reimported into ESR, and my previous design objects dtA, dtB, siC will be lost if i reimport I_MYCOMP_SWCV_TWO
is there any wayout, in which all my previous objects will not be lost, (so that i need not re-create manually) after importing I_MYCOMP_SWCV_TWO
thanks,
Madhu.
>>>they will not be lost for sure (you you reimport without deletion)
thanks, when we try to reimport without delition.. we got below message.
A software component version with the name I_MYCOMP_SWCV_TWO already exists
To update the SLD information, use the relevant menu option in the editor for software component versions
But it is possible to update SWCV from the content from the sld.
that served the purpose.
thanks again.
Similar Messages
-
On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo
I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks -
I imported photos into iPhoto from my iPhone, however i cannot access them. When clicking on iPhoto Library where they should be stored the folder is blank but if i open up iphoto from the dock menu they appear. I had to create a new folder just to access them. help please, because making a new folder takes up unnecessary space.
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected. -
I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.
Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected? -
I have moved my iPhoto to an external hard drive. so now I have to have the external hard drive connected to my laptop to view the photos. Now when I want to import photos into iPhoto from my media card, I don't have room to connect both devices at the same time as the usb ports are side by side. How do I import my photos from the media card to the external hard drive now?
First transfer the photos to a folder on your MacBook using Image Capture in your Utilities folder. Then move them to iPhoto.
BTW, you might want to invest in a cheap USB hub. -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
How can I import video into iMovie from a DVD?
How can I import video into iMovie from a DVD?
Thanks,
Doug DavisYou can do this with a free app called MPEG Streamclip and a $20 quicktime component from Apple.
See detailed instructions here.
https://discussions.apple.com/docs/DOC-3951 -
How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
<Email Edited by Host>chrisfromgoodworth clatford wrote:
How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
Possibly. Media Go supports a variety of music formats, some of which can be imported in to iTunes and then synced on to an iPhone, however some of its formats cannot be imported in to iTunes.
See http://mediago.sony.com/enu/supported-file-formats/ for a list of formats supported by Media Go. iTunes for Windows supports MP3, AAC, WAV, and can import and convert WMA files as well. However iTunes does not support ATRAC, or FLAC.
Furthermore, if some of your music has been bought from an Internet music store it might be procted by DRM. If so it cannot be imported in to iTunes.
To do the importing you would either drag the music files in to iTunes, or tell iTunes to open them. See http://support.apple.com/kb/ht1347 -
How to bulk import data into CQ5 from MySQL and file system
Is there an easy way to bulk import data into CQ5 from MySQL and file system? Some of the files are ~50MB each (instrument files). There are a total of ~1,500 records spread over about 5 tables.
ThanksWhat problem are you having writing it to a file?
You can't use FORALL to write the data out to a file, you can only loop through the entries in the collection 1 by 1 and write them out to the file like that.
FORALL can only be used for SQL statements. -
Iphoto unexpectedly qyuits. This began after dragging photo's into iphoto from scanner
iphoto now unexpectedly quits. This began after dragging photo's into iphoto from scanner
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.
here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs. -
Trouble importing video into iMovie from External HD
I have video from my Panasonic Full HD camera. I have already transferred the video off the camera and onto an external hard drive. When I try to import the video into iMovie those files are grayed out. Does anyone have any idea how to make this work?
It is all my video of my son's first year since birth!It is very important that when you transferred the video off the camera, you kept all files and folders from the camera. If you did, you can open iMovie and use FILE/IMPORT FROM CAMERA ARCHIVE and navigate to the folder that contains the contents that you removed from the camera.
In the future, open iMovie and use FILE/IMPORT FROM CAMERA. This will bring up an import screen. There you can click a button that says Create Camera Archive. This will automatically get you all the files you need off the camera, and it gives you a good backup.
You can also import directly into iMovie from this screen.
If you did not preserve the contents of the camera - for example, you just copied the .mts files, but did not copy the rest of the files and folders, you will need a third party app to convert the .mts files so that iMovie can read them. Two apps that people use for this are ClipWrap and Voltaic HD. They are pricey, but if you did not copy the full camera contents, this may be your best bet. -
How do you import photos into iPhoto from an iPhone?
how do you import photos into iPhoto from an iPhone?
1 - with iPhoto open connect the iPhone to your Mac with its USB cable and import.
OT -
Insufficient authorization to import software component version from SLD
hi guru
i can not import software component version from SLD into ESR. once the software component version has been chosen, a message will be displayed, Insufficient authorization to create object ElementTypeId: 0, Name: SALES, Vendor: sap, Version: 1.0, GUID: 32e93300b3e511decc06ecae0a421877, after CREATE button has been clicked.
any ideas? thanks
Edited by: Stephen Xue on Oct 8, 2009 12:00 PMHi Stephen,
If you want to create the SWCV and import that SWCV to the IR/ESR then your user having either one of the below roles.
SAP_XI_ADMINISTRATOR
SAP_XI_CONTENT_ORGANIZER
Go to transaction SU01 and give your user name and click on display.
Now click on Roles tab, here you check the above roles are appearing or not, if not then you don't have privilizes to do that things.
If you don't have that credentials then contact your BASIS guy.
FYI
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards
Ramesh -
After reinstall of OS and new HDD, can't import JPGs into iphoto from my SD card
My HDD failed - so I installed new HDD, reinstalled Snow Leopard and had Time Machine copy all my backed up content to my White Macbook (2007).
All my content is back - events etc in iphoto. But I just tried to import 200+ pictures from my camera's SD card, a process that has always worked flawlessly .... The thumbnails appeared blank on the Import screen. After clicking Import, and seemibgly going throufgh every picture, the error message was thatfiles could not be imported - The files are in an unrecognizable file format.
Any ideas? Any help much appreciated.
Thanks, JohannesAs a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Maybe you are looking for
-
IPad Notes App. not syncing with iMac
I just set up my new iMac and began to sync my iPad (3rd Gen.) to the iMac over the iCloud with WiFi enabled. Seems like everything syncs except for the Notes App. on the iPad. When I open Notes on my iMac, I see "updating" listed on the title bar
-
Why does my While loop not work?
I was using the SetInterval timer but this kept causing problems getting the timing right, So I thought - get the loop to work infiitely... var cond=0; while (cond !=1){ $("#DivStage1").fadeIn(1000); $("#DivStage1").delay(6500).fadeOut(500); //8000 $
-
In Process Order status "SETT" Settled
Hi After settlement of Process Order, system status (SETT - Settled) of Process Order is not updating atomically. After settlement of Process Order, Process Order allow only in Display mode & there is no posting allow against settled Process Order.
-
Rounded Corner Text Box in iWeb 2.0 - just like this site
As you can see on this very apple site the corners of its main boxes are rounded. In iWeb you can't make your text box rounded unless you place your text in a rounded corner shaped box. However for formatting purposes the shaped box won't expand or c
-
I entered an invoice from a foreign vendor who billed in foreign currency but wants to get paid in US dollar by bank transfer. The system correctly converted the foreign currency to US dollar. But in automatic payment run, it did not pay the vendor.