ESS 50.4. doesn't work - Which T-CODES are contained in ESS?

Hi guys!
I have troubles with my ESS 50.4.(ITS based version).
When I click some links (for example My Qualification Profile), the ITS screen of the ESS iView shows the message: "The Internet Transaction Server could not start the transaction "MY_QUALIS" because of the following error: transaction MY_QUALIS ios unknown."
So I want to try create Transaction iView for these error screens.
Can you help me, where to find the list of these TCODES?
Thanx a lot!
Peter

Peter,
It should work without you having to create a transaction iView. There are basically two different types of transactions in that ESS package - one requires the service file and html templates to exist on the ITS (which I suspect are the ones you are having trouble with), and one which doesn't.
Have you tried publishing the MY_QUALIS service from the backend system to your ITS instance via IACOR? Or you could just run report W3_PUBLISH_ALL_SERVICES in R/3 to publish everything to the ITS...
Regards,
John

Similar Messages

My phone's earphone doesn't work which was bought from USA last month,the china apple store didn't accept the free repaired,so what can i do now?

my new iphone5s's earphone doesn't work which was bought from USA last month,probably it was cause by falling down on floor insidentally one day before I came back china , the problem is ,the china apple store didn't accept the free repaire even the phone was bought only one month age, I was so disappointed and realized the iphone 5s is so fragile,although I previous iphone4 which was also bought from USA 4 years age, it also fell down many times, it still works well now. what can i do now? send it back to USA for repairing? if like that,it will take almost two month to finish the all processes,that not only waste the time spent on the way, also waste expense on the expense,the important prlblem is, I can't use the phone during the repairing~ please give me a solution as soon as you can ,thank you very much!

You can send it to someone you know in the US to have them take it in for service or you can get on a plane and take it there yourself. You can not ship it to Apple in the US for service.

Addition doesn't work until both inputs are initialized?

I'm using a Logitech web camera to take pictures. I want to operate in either of two modes:
1) Overwrite - each picture taken replaces the previous one
2) Accumulate - each picture taken is added to the previous one (pixel by pixel)
The attached .doc shows a simplified version of the VI
It's working fine except for one thing ... I can't start out in "accumulate" mode. I have to take one picture in "overwrite" mode before "accumulate" mode will begin to work. If I try to begin in "accumulate" mode, the display just sits there blank regardless of how many pictures I take, until I take one in "overwrite" mode.
Does this must mean that the addition function doesn't work until both inputs are initialized? If I initialized the shift register to an array of zeros would that fix it? I tried it and it didn't seem to help, but maybe I need to make sure the initialization array is the same size as the picture array?
Thanks
Eric Coppock
[email protected]
Ball Aerospace & Technology Corp
Attachments:
accumulate example.doc ‏47 KB

Look up the rules for addition and you will find that when you add two arrays, you can only add elements that exist(in both arrays). Otherwise, there is nothing to add. If your shift register is uninitialized, then that's your problem.
Two solutions:
1... If you know the size ahead of time, then initialize an array of that size with zeroes, and wire that to the outside of your shift reg.
2... You could detect I = 0, and replace the array with your new data on the 0th iteration, regardless of the mode switch. In other words do not perform an ADD if there's nothing there yet.
Either one of these is preferable to using the data from an uninitialized Shift reg. The data might not exist, or it might be leftover from your last run an hour ago.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

HT5622 What do to when you buy app and it doesn't work even though you are billed.

What to do when you buy an app and it doesn't work after you were billed

Start a ticket here: http://expresslane.apple.com
Go to iTunes, iTunes Store.

SetMaxInactiveInterval() doesn't work fine when there are a few sessions

I'm using setMaxInactiveInterval() to set different values for sessions in
          program. When I test it, it works fine if there are only one or two
          sessions. But if there are more sessions, say nearly 10, they will be
          expired randomly such as at around 2 minutes when set to 3
          minutes(setMaxInactiveInterval(180)). BTW, my server is WLS6.1
          Any suggestion? Thanks a lot.
          Hattie


Why not keep things simple and create a shortcut on the user's machine that uses this target command:
\\SRV2\d$\dir1\subdir1\subdir2
Simply because dir and subdirs are no constants.
Just imagin you have a webpage that looks like this :
Proj. #   Custommer    directory    bunch-of-other-stuff
4538      Microsoft        \\SRV2\Big_contracts\US\2014\software   etc
4539      Nokia             \\SRV3\Prototypes\EU\2012\hardware      etc
4540      So-else          \\SRV3\Big_contracts\EU\2013\software etc
Instead of the full path you have a small folder icon (to save space). And clicking on this icon will bring you directly to said path.
It was extremely convenient, very user-friendly. And it has been working for over a decade, and today my users are frowning...
I think you are pushing psexec.exe beyond its limits.
No, it's working perfectly on Win XP. I just find it too sad that it no longer works on Win 7. I view this as a regression.
When you run it the way you do it you actually do open a further Explorer process but it remains invisible to you because it runs in the background.
No, the user does get a new explorer windows that pops to the foreground. The
only trouble is that it opens in "My Documents".
Of course I could (try and...) teach them to right-click, copy the link, paste it in an explorer and so on, but they are going to hate me.
Thank you

How to see which company codes are affected by a WT

Hello Community,
Hope you all are doing well, I would like to consult you because I have this situation, I want to know what company codes are affected by a particular WT in an specific country, is there any report or Transaction or do you know a way to do it? I tried by launching the WT report in a large period for country area with the wt that I want to check but the problem with this is that it may exclude a company code that can have the wt active but was not generated under the period. Please your assistance.
Thanks in advance for your time

Efrain,
Not exactly sure your requirement, however there is a transaction code PC00_M99_DKON which will show you the wage assignment. On the selection screen enter your country code as 10 if running for USA and the wage type. Execute it.
When you run it for a particular wage type and expand the results 'source system' then you will see the associated Company code for which the wage type is applicable.
Hope it helps you.
Thx,
Ashish

When publishing imovie to you tube password doesn't work which password are they asking for you tube or apple

I've done this before and it has worked, but now it's not working.

Youtube. Apple ID has nothing to do with publication on Youtube.

Script doesn't work, if GUI subscreens are collapsed

Hello all,
I am to code some scripts to automate some boring, but necessary steps in trainings. Unfortunately my scripts don't work ("The control cound not be found by ID"), if the GUI looks different compared to the reording phase (e.g. other tabs are selected or subscreens are collapsed).
The problem with the tabs could be solved by clicking on the needed tab regardless whether it is already open or not.
But I was not able to solve the problem with the collapsed subscreens. Clicking on the "Open subscreen"-button without looking at the current status doesn't help. The state just toggles and noone can say, whether its closed or open afterwards. Furthermore, according to the API-Doc, there is no possibility to check, whether a control is available or not. Is that true? If there was a method, I could make use of an if-clause to click on the "open subsreen"-button conditionally.
Has anyone good advise for me?
Thx a lot!
Klaus

I found another possible issue while looking at a similar problem. I was unable to execute a PowerShell script as a Task Scheduler action, even though the script ran correctly when logged into Windows as the target user and running within PowerShell.
Task Scheduler would consistently display the 0xFFFD0000 error when I nominated the script in the task's action arguments using what I believed to be normal PowerShell quoting rules:
-ExecutionPolicy Bypass -File 'D:\full path\to\script.ps1'
PowerShell acquiesced and Task Scheduler fired off the task immediately and without issue when I changed the quotes I used from single to double:
-ExecutionPolicy Bypass -File "D:\full path\to\script.ps1"
Dropping to a command prompt and executing the full command immediately revealed the problem:
D:\>C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -ExecutionPolicy Bypass -File 'D:\full path\to\script.ps1'Processing -File ''D:\full path\to' failed: The given path's format is not supported. Specify a valid path for the -File parameter.
Notice the strange use of two single quotes before the path and one single quote after.
The moral of the story: When feeding the full path of a script to PowerShell as a command line parameter,
use double quotes!

Headphone Jack doesn't work and internal speakers are stuck in mute.

So I have an 18' macbook pro with a 2GHz Intel Core i7 and running version Mac OS X (10.7.5). I recently dropped my computer off my lap while my headphones were still in. The headphone jack smashed into the computers headphone output jack I took out the headphones and they still work but now no matter what pair of headphones I use I cannot hear anything when plugged in. As well when I take out the headphones the sound output does not switch back to internal speakers but says Digital Out. I know the speakers work because when I was messing the out jack because I read when a red light is on inside the jack (which it goes on and off) means it is stuck in mute. That however has not worked so far and neither has putting in and taking out the headphone jack.

Use OnyX to clean your system and User cache files. It's free to download. Just click on the "Automation" tab, check the boxes and run it.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Username search doesn't work properly if there are spaces in the username

I was experimenting with the watch user widget and you have to select a user from a list of users based on a search.
The problem is that spaces are not respected in the search so that you can't easily set up a watch on a user name with spaces.
Two examples that I tried were b noir and katrina s.

I actually just set up my watch user for you, p, saw your post title and wondered if you were looking for me. I have the same sort of trouble.
My workaround for this (and also constraining discussions search on my posts) is to not refer to the drop down list. Instead, I click the wee blue "Select People" link next to the field. In the Username Lookup thingy that comes up, I type b noir into the Username field, and then click Lookup. That'll bring me up.
I agree it's not easy. Took me quite a while to work out the procedure.

DLL created with LV 7.1 Application Builder doesn,t work when analysis subVIs are present

I'm looking for a solution of the following problem.
The DLL created by the "sum1.vi" source works properly, while the DLL create by "sum2.vi" always gives a zero result.
The "sum2.vi" source contains an additional "Hanning Window" VI (not wired), that seems to be the cause of the problem.
If I delete the Hanning VI and re-build the DLL, the same works fine
Is there a solution or is it not possible to make Labview DLLs when containing analysis VIs as filters, windows, FFTs, and so on?
Thank you for your answers.
N. Roberto
Attachments:
sum1.vi ‏12 KB
sum2.vi ‏14 KB

Roberto N. wrote:
Thank you Jordan, I'm using Labview 7.1.
Anyway I've resolved the problem by adding the "lvanlys.dll" file (present in "..\Labview 7.1\resource\lvanlys.dll" path) as support file in the building process. Now the DLL containing the analysis functions works correctly.
Natalino Roberto
Ok, you probably got lucky since the lvanlys.dll seems to implement that function directly. However most Advanced Analysis functions are just redirected by lvanlys.dll to the Intel Math Kerneal Library that gets installed with LabVIEW 7.1 and higher. The only way to get that properly installed with your LabVIEW executable or DLL is to create a LabVIEW installer in your Application Builder and make sure to select under "Installer Settings->Advanced" the "LabVIEW Run-Time Engine" and the "Analyze VIs Support". Then use that installer to install your DLL on another computer.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

My ToggleButton doesn't work anymore! (code)

I've extended JToggleButton to toggle the visibility of a JFrame. Click it once, the button is selected and the frame is visible. Click it again, the button is deselected and the frame is hidden.
At least that's how it used to work! I recently lost a hard drive and restored all my projects to a fresh RedHat 8.0 install with Gnome and j2sdk-1.4.1_02-fcs. Previously I was running Mandrake 8.1 with Ximian Gnome and j2sdk-1.4.0-rc. Now when I activate the toggle button, the window appears; but when I click it again, it remains activated and the window is not hidden. Both windows flicker though.
I have run into weird problems with various window managers in the past, like not respecting the modality of a dialog. Having just upgraded my whole environment, though, I don't if it's a quirk of the WM, a bug in the SDK, or what.
Could somebody test this code and tell me if it works?
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
public class ToggleTest {
public static void main(String[] args) {
     JFrame toggleFrame = new JFrame("Toggle Test");
     JFrame buttonFrame = new JFrame("Toggle Test");
     JPanel panel = new JPanel();
     panel.setBorder(new javax.swing.border.EmptyBorder(20, 20, 20, 20));
     JLabel label = new JLabel("This is only a test.");
     panel.add(label);
     toggleFrame.setContentPane(panel);
     toggleFrame.pack();
     toggleFrame.setResizable(false);
     panel = new JPanel();
     panel.setBorder(new javax.swing.border.EmptyBorder(30, 30, 30, 30));
     panel.add(new PanelButton(toggleFrame, "Click Me!"));
     buttonFrame.setContentPane(panel);
     buttonFrame.pack();
     buttonFrame.setResizable(false);
     buttonFrame.setVisible(true);
private static class PanelButton extends JToggleButton {
     private final JFrame frame;
     public PanelButton(JFrame f, String label) {
          super(label);
          frame = f;
          /* initial button state */
          setSelected(frame.isVisible());
          /* when frame closes, deselect button */
          frame.addWindowListener(new WindowAdapter() {
               public void windowClosing(WindowEvent e) {
                    setSelected(false);
          /* when button is toggled, show/hide window */
          addChangeListener(new ChangeListener() {
               public void stateChanged(ChangeEvent e) {
                    frame.setVisible(isSelected());
} /* end inner class PanelButton */
}

I changed the button's ChangeListener to an ActionListener and it works.
Now I'm not sure if it ever worked. I'm pretty sure it did, but I went through my incremental backups and it's always been a ChangeListener.

Now my MS Office doesn't work because powerpc applications are not supported by Lion. what now?

Does this mean that I have to purchase a new version of MS Office that is supported by Mac chipset? Wish I'd known that before purchasing Lion. Is there a way to work around this?

There are already plenty of threads on this subject. Just search PowerPC or Rosetta and Lion.
Yes, you have to upgrade the nearly decade-old software.
No, there isn't a workaround, although there are alternatives to Office.

Itunes+iphone doesn't work! all files are grey!

i connect my iphone to itunes and all the files are grey!
i can't select any of the files and i cant transfer any new files.
please help!

If you have selected only sync checked music then it will sync only what is checked.
If you have it set to sync certain playlists then you can add and remove songs to the selected playlists and sync.
If you have manually managed music selected you can drag and drop.
Here is an article for manually manage music and a link to the manual:
http://support.apple.com/kb/HT1535
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

Thief pre order DLC code on xbox one doesn't work say's code has already been used?

I picked up my pre order of thief today after I installed it I entered the code for the DLC and it tells me the code has already been used, I also tried it on xbox.com and I got the same message
someone please help
thanks

Hello Gamers,
I am sorry to hear of the difficulty you are having with your pre-order bonus codes. While this is not our desire to provide any issues with their codes, we have a process in place to provide you with direct support for just such an occasion. You can get the full details here, but I'll put the main points below for your direct use.
If you are seeking customer service with a pre-order code, we are here to help. Just send us the following information via private message to our Gaming-BBY inbox (click that hyperlink to bring up a private message already addressed to that inbox):
Message Subject: Game Title & Platform
Message Body: Include...
• Proof of purchase (Customer Service PIN from in-store receipt or BestBuy.com order #)
• Email address (the one you provided for the code)
It is very important that you include all of the above information for the fastest service.
Thanks guys!
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

ESS 50.4. doesn't work - Which T-CODES are contained in ESS?

Similar Messages

Maybe you are looking for