ESS 50.4 on Internal ITS 6.20 with ECC 6

We are using ESS 50.4 on ECC6 with internal ITS. It is working well except for a mouseover message when the user places the mouse over a pushbutton in the applications for Address, Personal Information, Bank Information, and Family/Related persons.
The mouseover message says 'Pushbutton deactivated' even though the pushbutton has not been deactivated.
Can this be fixed via the portal or through ICF or in SE80?
What development causes a message on a mouseover of a pushbutton when using SAPGUI for HTML?
Is it an ICF variable setting, an ITS CSS issue, a portal issue, or something else.
The ITS parameters are set to:
~singletransaction=1
~webgui=1
~webgui_simple_toolbar=128
~generateddynpro=1
~popups=1
Is there some other parameter that would prevent the mouseover message from appearing?
Also, the web status menu appears when the user right clicks in the screen. How to stop this from appearing?
Thanks for any suggestions,
D. Maupin
University of Kentucky

Hello Donna,
I would like to ask you to have a look at SAP note [1263586|https://service.sap.com/sap/support/notes/1263586] (Quick info on screen button contains text "deactivated"); it has been released a few days ago. It seems that this note is what you are looking for.
Thanks and regards,
Cris

Similar Messages

ITS version compatabiity with ECC 6.0

Hi Experts,
I have to install ITS (server components) at one of my client side to some transaction on web, earlier they were using R/3 4.6 and they switched to ECC 6.0
Please tel me which ITS version is comatable with ECC 6.0
I installed server components (ITS) from R/3 4.7 cd pack but i was unable to publich internet services from se80, (published successfully message on status bar but no service in the c:\program files\SAP\ITS\6.20\service folder)
Then I tried to install ITS from ECC 6.0 cd pack but i was unable to install it. the setup.bat file ask for sapinst.exe file but its not in the CD(i also checked in another ECC6.0 pack )
I dont no which one is compatable with ECC6.0, i have to generate web services for some customised transactions, can anyone tel me how to solve this pproblem of installation or if any other way to generate web services please tel me the procedure...
Regards
Manish

Instead of PZM3, use the Homepage Framework to launch your ESS offering (HF is configured in the IMG and tied to the XSS Java components that will need to be installed as well). You can run ESS standalone in this manner although SAP frowns on it (hey, they want to sale the portal! haha).

Migrating Services From External ITS to Internal ITS

Hi All,
We are migrating from External ITS 2.0 (SAP R/3 4.6B) to Internal ITS 6.0 (SAP ECC 6). Can anyone tell me on how to migrate services which are there in External ITS to Internal ITS, so that the same External ITS services are visible in SICF or SE80 Transaction.
Thanks and Regards In Advance,
Sidhartha Chatterjee

Hi Sidhartha,
As Klaus recommend, you should start with help.sap.com.
I would also suggest doing a search in this forum, for similar threads like your. There are many of them, with good links and tips.
I think a very good practical start to understanding the internal ITS is to read Durairaj Raja's excellent webblog, "Running your first ITS WebGUI application in SAP Netweaver 04 ABAP Edition", /people/durairaj.athavanraja/blog/2005/08/21/running-your-first-its-webgui-application-in-sap-netweaver-04-abap-edition--nsp
regards,
Jørgen

ESS with Internal ITS

We are using ESS 50.4 on ECC6 with internal ITS. It is working well except for a mouseover message when the user places the mouse over a pushbutton in the applications for Address, Personal Information, Bank Information, and Family/Related persons.
The mouseover message says 'Pushbutton deactivated' even though the pushbutton has not been deactivated.
Can this be fixed via the portal or through ICF or in SE80?
Thanks for any suggestions,
D. Maupin

Donna,
Those parameters look about right for the WEBGUI service, but not so much for the ESS services you mentioned.
I just had a look at one of the few remaining ITS based ESS services we still use (PZ03 Bank) and the parameters we have set in SE80 and SICF look like this:
~AUTOSCROLL      0
~GENERATEDYNPRO      1
~LANGUAGE
~LISTSCROLLING      0
~LOGIN
~PASSWORD
~POPUPS      1
~STYLE      DHTML
~TRANSACTION     PZ03
~WEBTRANSACTIONTYPE EWT
The mouseover messages seem to work fine for us with those parameters, maybe try setting one of yours the same way and see if that helps.
regards,
John

Application Server Session timed out (-11) (lack of debug in internal ITS)

Dear Sirs,
I get the error message below, when I try to run a IAC through internal ITS. The IAC worked for a while (<30 minutes), and then suddenly this error appeared.
I can see that this error message has been asked about previously, but then in connection with statefull/stateless BSP applications (e.g "Session timed out thread", on this forum May 31 2005).
In this thread the solution is apparently to alter the 'rdisp/plugin_auto_logout', is this the case for us as well?
I have read Error handling using the ICM , but not able to actually beeing able to pinpoint the problme.
All our other IAC are working it is only a problem with one of them. The problem is still valid even if I log on with different user, and the error is still there now even after two hours. The problem transaction is a altered version of the WSTA, and I am able to get the first screen where I enter the store number.
Any tips or suggestions to pinpoint the error?
+400 Session timed out - please log in again
Application Server Session timed out (-11)
Error:     -11
Version:     6040
Component:     ICM
Date/Time:     Thu Apr 27 14:13:56 2006
Module:     icxxthr_mt.c
Line:     1719
Server:     xxXXXt_TXX_XX
Detail:     Session does not exist+
In SM21 :
+Transaction Canceled ITS_P 025 ( 0x2103: Interpreter: The input contains errors. )
Documentation for system log message D01 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T200 message and the parameters.
Additional documentation for message ITS_P               025 Template interpretation terminated - internal error &1
No documentation exists for message IT025+
Best regards,
Jørgen

Dear Sirs,
The error has been solved. It was a matter of an illegal input sendt to the RetailHeaderFunction.
However, this makes way for another question.
On the standalone ITS, it was possible to get error messages which indicated where the code contained errors, when it was runned.
How is it possible to make the internal ITS gives better feedback (errors?), and show where the error is?
Jørgen

ESS Its version in SAP ECC 6.0

Hi Guys,
I would like to use ESS its version on WAS 7.00.
With WAS version, I've only integrated ITS (not standalone), activate a webGui Service but I don't know how to start an ESS services on an integrated ITS architecture.
Eg.
in old system with ITS 6.20 and SAP 4.7, we called a service with "http://<hostName>.mycompany.it//scripts/wgate/pzm3/!".
Have any ideas?
Thanks everybody.

Hi Antonello,
SAP note 870126 might be of interest.
Thanks and regards,
Dieter

Cprojects 3.1 and internal ITS

Dear Sirs,
we are usign cprojects 3.1 in conjunction with internal ITS on WAS 6.40. In accounting and other places where there are links to SAP transactions, when clicked, they open a new window with the following url.
host/scripts/wgate/webgui/!?Calling parameter
However on the internal ITS this has changed quite to:
host/sap/bc/gui/sap/its/webgui?Calling parameters
I need to change the calling URL of cprojects in order to get cprojects to work with internal ITS. I have not seen any way to do this in customizing. Any ideas?
In note 668808 cProjects: HTTP error 404 when calling R/3 transaction, there is reference to a error with the ITS calling URL (how to force it to lower case). The corrections is done to METH CL_DPR_OLR3_WORKCREATE_URL_TRANSACTION
My plan is to rewrite this meth to use the new its path, however is this the correct way to do it? Or are there any other way to do it?
Regards,
Jørgen

Hello,
if the SAP server which are running FI/CO (accounting integration) does not have a standalone ITS, and is running WebAS 6.40 or higher, you can activate the ITS. I will not go into how this is done, as a fast search on sdn will provide you a much better answer.
The internal ITS is not a pre-requiste for calling controlling cockpit (or other transactions) from cProjects; the pre-requiste is an ITS server. However, whether this is a standalone or internal one does not make much of a difference.
regards,
Jørgen.

Internal ITS, ITS_ERRMSG_EXCEPTION SAPMSYST

Dear Sirs,
I am currently facing an issue with an IAC based on the standard WSTA (some modification to the IAC) program by SAP. It runs quite well, but it looks like out of a 500 user sessions I have got three similar short dumps.
The error message is,
Es wurde eine Fehlermeldung von WebAS empfangen. Fur das Grundbild der Fehlermeldung (Program: "SAPMSYST" Dynpro-Nummer: 40) wurde kein Template gefunden, der ITS service musste deshalb abgebroten worden. Beseitingen Sie nach Möglichkeit die FEhlerursache. Erst wenn die Feherursache beseitigt ist und damit die Fehlermeldun von Web nich mer gesendet wird, ist dieser ITS Service wieder lauffähig.
I know the answer generally is to active ~webdynpro 1 (it is currently 0). However as I understand it this will only make the error appear more sensible. I can not understand why it only happens 1/100 times, could it be something to do with scarce resources?.
Does anyone have any input on where to start looking for the error, what is the normal errors concealed by the error.
I am aware of note 859213 Integrated ITS, error messg on transaction selection screen, however if does not give an answer. We are on the recommended stack/patch level.
best regards,
Jørgen

Hello Klaus,
first of all I would like to thank you for the very good answers which you always seem to give.
As for the ~webdynpro it was a typo :=).
The service is migrated from standalone ITS to Internal ITS, and the same a dynpros is covered (same templates, same parameters). Would you think that is probable that this error has been exsisting at the standalone ITS as well, and have just been discovered now. Or is this something which may have been caused by the internal ITS migration.
Our big problem is that since the error is rare, even though if we set ~generatedynpro 1, if the long error appear on the end user side. It is unlikely we will be able to get the long solution? (as the users probably will forget to send it to us).Or will the long solution be available in some central log which we can read.
And just to double check, there are no downsides on setting the ~generatedynpro 1?. If it not, I guess best practice should be to set it on every IAC.
Best regards,
Jørgen Ruud

Internal ITS

Hi everybody!
We try to migrate the an application which is on a ITS server to the internal ITS of a WAS. This is working w/o any problems beside that we can not change the design of the search help. How can I change this? Are there any descriptions?
Thanks in advance for your answer..
Bye Markus

I moved the question to ITS Forum.

Internal ITS, IAC and PocketPC Browser

Dear all,
we have some self written IACs running on a PocketPC. After migration to WebAS 7.0 with internal ITS the IACs quit with "Browser version not supported". There is no problem running these IACs in the Browser, they are all classic IACs with just HTML code. No JS and so on. Anybody an idea how to tell WebAs not to throw the exception?
Kind regards
Roman Becker

Hi Roman,
SAP note 972116 deals with that issue.
Thanks and regards,
Dieter

Internal ITS - service CATW not running

Hello Experts,
I want to migrate from external ITS to the internal on ERP2005. The internal ITS seems to work, at least service webgui looks ok.
What I need most is the CATW (timesheet) service. I have published it in SE80, in SICF I have added several parameters in the Gui-Configuration, now the service starts but what I get is not the "IAC-look" of CATW, but I get the transaction CATW which opens in the webgui. (looks exactly like in the gui when opening transaction CATW.
Any hints and tips for me?
I just want the Cats regular (ITS version) of the timesheet which uses the CATW service templates.
best regards,
JOhannes

Johannes,
Thank you for your quick reply. At first I tried looking for Aliases in SICF, and couldn't see any for sap/public/bc/its/mimes (although I don't know how to find an internal alias sorry) so I created an external alias sap/public/bc/its/mimes to point to default_host/sap/public/bc/icons which in SE80 Mime Repository looks as though it's where s_b_copy.gif is, but that still didn't let CATW find s_b_copy.gif so I went back to SE80, Internet Services, CATW. There I created s_b_copy.gif under CATW > Topic 99 > Mime Objects > ICONS which is where I find other .gif files which work, e.g. DELETELINE.GIF. I then changed template 1000APPCORE so that teh code for s_b_copy.gif looked like the code for magnify.gif which is:
<a href="#" onclick="javascript:OkCode1000('COPYTARGET')"><img src="`mimeURL(~service="CATW", ~theme="99", ~language="", "icons/s_b_copy.gif")`" border=0 alt="`COPYTARGET-TIP`"></a>
I published CATW again, and when I start the service, s_b_copy.gif still doesn't show, but when I look at it's properties it's the same as for magnify.gif which is <server>/sap/public/bc/its/mimes/CATW/99/icons/magnify.gif
I'm obviously misunderstanding something as I thought this would get the icon displayed. Any thoughts what I'm missing please ?
Thanks again,
James.

Log file (access.log) of the internal ITS

Hello,
anybody know how to access the logfiles of the internal ITS. In particularly im looking for the log file access.log which you had for the external ITS accessable over the ITS admin page http://<servername>/scripts/wgate/admin/!
The log file loged all users and the transaction they accessed over the time in the format
2006/10/21 18:39:16.093, 0 #197349: IP ???.???.???.???, -its_ping
Thanks in advance,
Kai Mattern

hi
good
go through these links, i hope these ll help you to solve your problem.
http://www.hp.com/hpbooks/prentice/chapters/0130280844.pdf
http://help.sap.com/saphelp_46c/helpdata/en/5d/ca5237943a1e64e10000009b38f8cf/content.htm
thanks
mrutyun^

How to use Web Filters methodology with Internal ITS with NW2004s

ITS 6.2 will no longer be supported going forward with the upcoming NW2004s. Only internal ITS will be supported with 2004s. However, since PAS APIs are not available with Internal ITS, Can any one give some clue on how we can use the Web Filters methodology for use with Internal ITS with 2004s.

A long time ago, but yesterday i have had time to try again to setup the MacMini server properly. But no luck.
sudo changeip -checkhostname
gives me:
Primary address          = 192.168.1.** (i don't know it's save enough to put this IP complete on the net)
Current HostName      = server.beeldenstorm.be
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success           = "success"
So their is something wrong. But how to repair the DNS?
MacMini server is working properly on our local network, but outside not. I have done the port forwarding.
Another problem is that i have read that for the server to work properly we have to use fix IP address.
So, that's what i am doing. But in that way their is no internet connection at all.
So, no updates and ... .
Lookup and Ping test, outside our local network:
http://beeldenstorm.be/doc/lookup-and-ping.pdf
Why is this so irritating and are there soo many problems on forums?
I know: because most of us are not network/server specialists.
But Apple sells this server app like a app for everybody, easy to install?
Thanks for help.

When differences in parameters in SICF and SE80? (internal ITS)

Dear Sirs,
When using the internal ITS it is nessicary to maintain parameters in both SICF and SE80.
In a case where it is a difference between the two, eg. ~theme 99 (SICF) and ~theme 90 (SE80), which will be the controlling one? (which has presedence over the other?)
Is it needed to set all the parameteres in SICF, or is it possible to set a bare minimum (~transaction and ~theme) and then set the rest in SE80. (as SICF can be out of the developers reach).
Best regards,
Jørgen Ruud

Thank you Klaus,
as usual a very good answer. I was under the impression that the parameters had to be maintained both places, which I found a bit strange.
Thanks for clearing this up to me.
Best regards,
Jørgen.

Unable to activate Internal ITS

Hi,
I recently installed WAS 640.
I tried activating the internal ITS, but somehow I am not able to do this correctly.
I have referred to all the SAP Notes I could find.
Also went through all the discussions in this forum.
Steps I have tried are:
1) SICF: Activated the Webgui and it00 services. Also activated its-->mime
2) Checked the parameters itsp/enable =1 and icm/server_port_0 is also correctly set.
3) I have published the Services "SYSTEM" and "WEBGUI" from SE80. Also Published ITS to site INTERNAL.
Could not find the service: SHUFFLER, hence sould not publish it in SE80. Is this required? How to resolve this issue?
When I test the webgui service from SICF, it opens the Web Browser, asks for User/Pass and then shows an Error Page which reads: ABORT_MESSAGE_STATE.
No System Dumps created at this time. SM21 shows Transaction Canceled ITS_P 001 ( ). One or two more entries were in German, and said something like: Path not correct(or not found) and one read: SAP Gui for HTML, service not found.
I don't remember correctly, maybe I can check that later and post here if required.
Can someone please help me with this?

I have done all the confiuguration that is available in all blogs, threads and guides for ITS on WAS 6.40.
But when trying to test the webgui service from SICF, I get the same error as mentioned in the first message in this thread.
I have checked the traces in dev_w0 and found the following:
M Sat Oct 27 14:46:53 2007
M        ***LOG W02=> & [itsphttp.cpp 1098]
W        *** ERROR => plugin: failed to parse header field path [itsphttp.cpp 591]
M        ***LOG W07=> & [itsphttp.cpp 592]
W        *** ERROR => plugin: parse named header fields failed, rc = 1 [itsphttp.cpp 241]
W        *** ERROR => plugin: ItspHttp_ParseHeader failed, rc = 1 [itsphttp.cpp 150]
W        *** ERROR => plugin: ItspHttp_HeaderFields failed. [itspagat.cpp 909]
W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 179]
W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   674]
W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    803]
M    ***LOG W03=> [itsplxx.c    804]
W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    806]
W    *** ERROR => Raise Last error:[1 from: itspxx.cpp :675] [itsplxx.c    1008]
W    *** ERROR => RaiseError ITS_P:01 [itspxx.cpp   675]
Does nobody know of this?
Please help.
Shitij.

ESS 50.4 on Internal ITS 6.20 with ECC 6

Similar Messages

Maybe you are looking for