ESS Benefits Participation overview print form HRESS_BEN_CONF

Hi
We are trying to use the print form HRESS_BEN_CONF for benefits participation overview. However, when clicking on the print icon, a pop-up comes out with no pdf form. HRESS_BEN_CONF exists in SFP but not showing up on ESS. Configurations all look ok.
Is there any checks thats to be done?
Thanks

in Standard it will point to SAPScript form HR_BEN_CONF.
You can change this to point to Adobe Form.
Maintain the form name HRESS_BEN_CONF and check the ADOBE radiobutton in table  V_74HL_1

Similar Messages

  • ESS, Benefits Participation Overview

    Hello All,
    We upgraded from ITS technology to Net Weaver EP5.0 and are now having problems with the participation detail failing to show in the participation overview for some insurance plans (IT0168).
    The detail for all standard plans shows in the portal.  However, for those plans where the coverage amount is calculated in standard user exit PBEN0011, no detail is showing.   Only the plan name and coverage type are visible.  The coverage amount and employer credit is not visible.
    Has anyone else had this problem?  If so, could you please advise us how to solve.
    Best regards,
    Janice

    Wauw....that is an old version of the SAP Portal.....
    1. Check your User-exit.....is there something wrong with it.
    2. Check for sap-notes.
    J

  • Benefits Participation Overview : No valid target content area found Error

    HI
    We are on EHP7 and using Portal 7.4
    I am getting following error when clicking on "Status" column in "Benefits Participation Overview"
    Thanks

    Yes, This Note solved my issue.
    Regards,
    Abhishek.

  • Reg:- Customization of ESS Benefits Enrollment Overview page

    Hi All,
    I have a requirement to customize the <b>Overview</b> page of <b>Add/Change Dependants and Benefeciaries.</b> I need to change the text of the buttons, "<b>New Father</b>", "<b>New Mother</b>", "<b>New Child</b>" and "<b>New Emergency Contact</b>". I have imported the ESS Business Package into NWDS.
    The problem is, I do not know the exact DC used to make changes to these changes. Can someone help me on the same? Please provide me the DC which is being referenced in this scenario.
    Thanks in Advance,
    Pavithra

    Hi Pavithra,
    Youc an use the FPM view to edit the texts of buttons. Just Go to the iview where you want to change the text in Content ADMIN--> Portal Content. Right click and preview it. After previewing use CTRL+Right Click by focusing on the button. There you can change the name of button.

  • ESS - benefits

    We are setting up the ESS --> benefits --> Participation overview. Would like to know if the data/screen fields displayed in the participation overview (after picking up a plan in the radio button) can be controlled. In othe words, I am looking at the IMG config for ESS --> benefits but don't see any node where the participation overview related information can be controlled/configured.
    Basically would like to know where all this is happening and if needed how can the screen data/fields be managed.
    Thanks,
    Mark

    I doubt if there is such an option in IMG..Have you checked <a href="https://wiki.sdn.sap.com/wiki/display/profile/2007/07/17/EnhanceStandardESSPersonalInformationUIwithout+modification">this</a>
    entry by Markus Klein?
    ~Suresh

  • Benifits Participation Overview - No valid target content area found

    HI
    I am getting following error when I click on "Status" column in "Benefits Participation Overview" screen.
    Please help.
    Thanks

    Yes, This Note solved my issue.
    Regards,
    Abhishek.

  • Benefits Participation Print Confirmation Form

    There is a Print Confirmation Form link on the Benefits Participation page that brings up an adobe form with a benefits summary. Where that form is located, maintained, and how can it be changed?
    Edited by: David Keiser on Feb 25, 2009 12:33 AM

    Hi,
    Go to Flexible Admin-->Form setup -->Assign templates to form types.
    And also in
    ESS >Home Page>services-->EMPLOYEE_FLEXBENS_PRINT_FORM & EMPLOYEE_FLEXBENS_PARTICIPATION
    Resources-->EMPLOYEE_FLEXBENSPARTICIPATION_SERVICE
    Here give the URL for Benefits Participation.
    Kind Regards,
    Saisree.S

  • Critical error in Participation overview of enrollment benefits.

    Hi All,
    This query is related to the benefits. Now we have opened for enrollment.
    After enrolling into some benefits, when the User is clicking on the Participation overview, he is getting the below error.
    Critical Error
    A critical error has occurred. Processing of the service had to be terminated. Unsaved data has been lost. Please contact your system administrator.
    Details cannot be determined for related person 91/01
    Please guide me as to what data is missing or what needs to be maintained?
    Regards,
    Pooja

    can you check the dependents are maintained correctly in 21 for this pernr

  • FlexBens:Open Enrollment/Print form- No correct adjustment reason specified

    Hi Experts,
    Need help on Flexible benefits of UK.
    I have done all the necessary configuration, but somehow im facing the "No correct adjustment reason specified" on the ESS pages of FlexBens:Open Enrollment & FlexBens:Print Form Screen. However, im able to view Participation screen.
    Also, i have maintained 171 and 378 aswell. but still this error comes. I have used Tcode HRFBN0001 for enroll ment from R/3. Its working fine here. Also I looked in functional module HR_BEN_ESS_RFC_ENRO_REASONS. Data is shown properly.
    I doubt if this is an authorization issue. If anyone of you know what should be the portal Role to access Flexible Benefits ok UK. or if you think the reason is something else, the please share with me your thoughts.
    Regards,
    Pranitha

    Hello Bhargava,
    Please assign/ Configure General Benefits Information (Infotype 0171) for PERNER.
    Go thru this link it will help you
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/7e/8a62e6545711d1891c0000e8322f96/content.htm]
    Thankyou,
    Regards
    Vijai

  • ESS Benefits and Payments

    Hi,
    I am getting the following errors when i click the "FlexBens: Open Enrollment" as well as "FlexBens: Print Form" on ESS benefits and payments
    No correct adjustment reason specified:
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No correct adjustment reason specified
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.xss.hr.fbn.enrollmentreasons.VcFlexBensEnrollmentReasons.isConsistent(VcFlexBensEnrollmentReasons.java:206)
         at com.sap.xss.hr.fbn.enrollmentreasons.wdp.InternalVcFlexBensEnrollmentReasons.isConsistent(InternalVcFlexBensEnrollmentReasons.java:174)
         at com.sap.xss.hr.fbn.enrollmentreasons.VcFlexBensEnrollmentReasonsInterface.isConsistent(VcFlexBensEnrollmentReasonsInterface.java:183)
         at com.sap.xss.hr.fbn.enrollmentreasons.wdp.InternalVcFlexBensEnrollmentReasonsInterface.isConsistent(InternalVcFlexBensEnrollmentReasonsInterface.java:152)
         at com.sap.xss.hr.fbn.enrollmentreasons.wdp.InternalVcFlexBensEnrollmentReasonsInterface$External.isConsistent(InternalVcFlexBensEnrollmentReasonsInterface.java:228)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:507)
    We are on ESS 6.0, EP 7.0.
    Thanks for your help...

    Hi Sharadha,
    Thanks for your quick response, i followd your steps now i am getting diff error.
    Flexible benefits is not activated for benefit area 10:
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Flexible benefits is not activated for benefit area 10
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.xss.hr.fbn.FcFlexBens.reportRFCError(FcFlexBens.java:1104)
         at com.sap.xss.hr.fbn.FcFlexBens.reportRFCError(FcFlexBens.java:1070)
         at com.sap.xss.hr.fbn.FcFlexBens.callRFCInitSelection(FcFlexBens.java:1364)
         at com.sap.xss.hr.fbn.FcFlexBens.readPlanSelection(FcFlexBens.java:525)
    Thank you..

  • Participation Overview iView

    In Portal ESS> Benefits and Payments > Participation Overview iView is not showing "Flexible Spending" as one of the listed plans.
    Please advice.

    http://help.sap.com/erp2005_ehp_03/helpdata/EN/1b/36834071adc65de10000000a155106/frameset.htm
    Use
    This service enables employees to view a list of plans in which they are currently enrolled. However, because this service is date-dependent, employees must first specify the desired effective date before their Participation Overview is displayed. Upon specifying that date, employees gain an overview of all benefit plans in which they chose to participate as of that date.
    From the Participation Overview, employees can select any particular plan in which they are enrolled, then review the details that are in effect for that plan on the specified date. For example, among other information, employees can review the planu2019s cost, coverage and participation period, as well as dependents and beneficiaries, if applicable.
    You can check here in trans code as well HRBEN0006.

  • Participation Overview-ECC 6.0

    Folks,
    We are planning in implementing self services and have installed the business packages for ESS. Is there a configuration guide available for how the individual services are configured? When I go to the link in the Portal side for the Participation Overview, it is blank. I have found config in the IMG and see a EMPLOYEE_BENEFITPAY_PARTICIPATION in the V_T7XSSSERSRV table. Shouldn't this work by default? I want to see what is delivered. What hooks the V_T7XSSSERSRV table to the link in the Portal? How do I find the generated URL or link for this service? When I go to a bsp app in se80 (e.g. HAP_DOCUMENT) - I see a URL in the Attributes that I can test. Is there a way to test the EMPLOYEE_BENEFITPAY_PARTICIPATION generated URL before I event test via the Portal application?
    Kind regards, Heather

    Is there a configuration guide available for how the individual services are configured?
    The documentation is available at each node of the IMG for the specified step. Past that, there is also the http://help.sap.com documenation for your specific version (which you did not list above).
    As for the specific Participation Overview  service....if you linked your userid to an employee record and that employee has benefits, you should see this. No special set up required. ESS config for Benefits is probably the "slimmest" of all.....you basically just set up a library of URLs and link those to plans and plan types....not much more...the rest is all dependent on actually benefits configuration outside of ESS.
    Hope this helps.

  • ESS Benefits open enrollment - Issue

    Hi,
    When we click on the benefits open enrollment link, we do not want some of the plans to be displayed to the ess user. Is there any way to control it ( SPRO or BAdI ).
    Env - EP 7.0, ECC6.0
    Thanks,
    Ravi

    I posed the same question to an ESS consultant who responded with the following:
    "The plans presented in benefits enrollment (PZ14) and Participation Overview (PZ07) are list output from ABAP.  You can go into the program and select or exclude some of them based on certain criteria.  I've seen customers extend the Plan infotype to add a flag field to make it configurable to show, not show a given plan."
    Since specific instructions weren't given, I wouldn't consider the issue answered.
    However, I can provide the following work around:
    Due to the fact that different populations have different open enrollment period timeframes, and all populations have been configured under one benefit area...we decided to create an "Open Enrollment Adjustment Reason" for each group instead.  Thus, the Adjustment Reason permissions will only display the plans we want the employee to see via ESS.  Prior to the open enrollment period for the population, we will run the Mass Adjustment Reason report to create IT378 for all relevant employees.  The OE offer will appear as another Adjustment Reason under the Enrollment service in ESS.

  • ESS Benefits Generic Enrollment - Different behavior backend v/s portal

    We are using the ESS Benefits generic enrollment service for enrollment kicking off the adjustment reasons on IT 0378.
    Here is the configuration set up, trying to simplify to explain the matter. We are on ECC 6.0 with EHP2.
    1.  Configured one plan type in savings category.
    2.  Within this plan type,  configured 2 plans.
    3.  Configured all other related configuration to set up the 2 plans.
    4. Configured the adjustment reason and the appropriate plan type created in step 2.
    5.  Created the required adjustment reason on 378.
    In HRBEN0001 transaction via backendwe can  see the 2 plans configured within the plan type.
    But when Trying to enroll from ESS - only one plan can be seen for that plan type, the other plan is not shown at all.
    OK - eventually, debugged and found this piece of code in FM HR_BEN_ESS_FILL_SELECTION_DISP.  The 2 different plans are there until this piece of code takes one of them Off...
      CODE -
    3.) Reduce entries to one entry per type and period
      delete adjacent duplicates from selection_display_gt
        comparing pernr
                  barea
                  bpcat
                  pltyp
                  begda
                  sprps.
    CODE -
    This FM is called only for ESS application and not for backed program.
    What we do not understand is why is it behaving differntly on backend v/s portal.
    Any information or experience with this form any one of you will be highly appreciated.
    Thanks.

    Siddharth,
    Thanks for your reply. Yes ESS has its own FMs.  The UI, user exits, BADIs etc are different for backend v/s front end.
    What we are not clear with, is the different behavior in core functionality --  i.e. When the adjustment reason is processed from the backend using HRBEN0001 - The 2 plans within the Plan Type are available for elections. BUT the same adjustment reason for the same penr when processed from  ESS - there is just one plan available for elections.
    It's clear from the code, that it is deleting one plan and this code is within the FM which is called only from ESS.  But we are still not sure why it should behave differently i.e. 2 plans via backend v/s one plan  via ESS. 
    Wanted to see if anyone can share any information if they have a similar benefits set up .. 2 plans within one plan type FOR savings plan category and then having a adjustment reason set up.
    Regards.

  • Change the content in Benefits participation area

    HI,
    In the benefits participation area under show benefits general links. There is some text. I want to change the text. I did not find the text in home page frame work service.
    How can I change the text to some other.  Is it comes from Web Dynpro or home page frame work. How can I change it.
    This is the text I want to change it.(Participation Overview reflects the benefits you are/were enrolled in as of the date you enter below.  Enter the current date to see a list of the benefits you are currently enrolled in. )
    2. Is there any way I can move the plans only to benefits main page.
    Regards
    Mark

    Hi,
    In the benefits participation area under show benefits general links. There is some text. I want to change the text. I did not find the text in home page frame work service.
    How can I change the text to some other. Is it comes from Web Dynpro or home page frame work. How can I change it.
    This is the text I want to change it.(Participation Overview reflects the benefits you are/were enrolled in as of the date you enter below. Enter the current date to see a list of the benefits you are currently enrolled in.
    --> can you provide a screenshot, technical information about the service (name of iview), your system (ehp4 ehp5?) and the architecture you use for Navigation (OBN, HPF?).
    2. Is there any way I can move the plans only to benefits main page.
    --> can you elaborate more detailed what you want to do? I don't have benefits in my system so I can't verify what you might mean. Screenshot would help as well here.
    Cheers, Lukas

Maybe you are looking for