ESS Business Package Error: Period type not allowed for profile ESS
Hi,
We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
Critical Error:
Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
Any ideas on how to fix this issue?
Regards,
Jojo
Hi Jojo,
Have you solved the problem? If yes can you please help me even I am facing the same error.
this is very help full to me .
Thanks and Regards,
Shilpi.
Similar Messages
-
ERROR OGG-01148 programming error, data type not supported for column
I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support -
I have created scripted calculation view
I can add parameter in aforesaid calculation view
It fetches me right result
But when I am to call aforesaid calculation view from odata service I am getting following error:
ERROR zcustsearch/services/AutoComplete.xsodata
Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view.
Any solutionsDon't reference it via the catalog object. Otherwise only the runtime Column View will be seen. Instead you should specific the view as the repository object. This means no schema and use package path::view name. Like this example from the SHINE content:
service namespace "sap.hana.democontent.epmNext" {
"sap.hana.democontent.epmNext.models::CV_SALESORDER_YEAR_COMPARISON"
as "salesYear"
keys generate local "ID"
aggregates always
parameters via entity "InputParams"; -
Rules are not allowed for jobs with set 'archive edited messages only' flag.
Hi,
We are on AEX 7.4 and have enabled user defined search and also setup archiving. Even though the retention period has expired but still the messages are not being
archived.
We see following issues:
1. Unable to setup archiving rule in Runtime Work Bench, we are getting following error:
Rules are not allowed for jobs with set 'archive edited messages only flag.
2. Unable to set the expiration of messages using the following link.Each time we specify the number days it shows the same number of
messages expired.
http://XXXXX:50000/MessagingSystem/job/reorgdb.jsp
3. However if we click on "remove messages" button the messages are getting deleted which tells me that the messages are not matching any
archiving rule hence are being removed.
Any pointers to the above issue are appreciated!!!
Thanks,
RajeevHi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen. -
Class type not defined for this object type
Hi Friends,
Could u please guide me ?..We have a requirement to extract some data from classification system.
This is related with class type 023 - Batch
I want to use the following parameters in CTBW.
basis datasource :Z_BATCH_ATTR
class type : 023
object table :MCHA
Datasource type : ATTR
I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
The only way I'm being able to make this work is changing object table from MCHA to MCH1.
This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
Do you know what should I do to solve this?
Thanks in advanceHi,
I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
As I'm trying to extract Batch attributes from "AUSP" Table.
I have given class type= 023
Obj Table= AUSP
But not sure which "basis datasource" I need to select.
Thanks,
Satish -
Table type not defined for table control "T_CONTROL" (Custom table)
Hi All,
I m facing a problem in ITS mobile service.
The Table control designed by me in R/3 (Module pool program) is
not getting displayed in ITS mobile page.
It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
Can you please let me how this issue can be resolved.
With Regards,
MaheshCONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
try using this....
Regards
Vasu -
Error : Wage Type is not allowed for personnel SG grouping for WT 3
Hi All,
When i am trying to create wage type Degree allowance i am getting error like below.
WT xxxx is not allowed for personnel SG grouping for WT 3 (from 01.09.2006 to
31.12.9999)
Message no. PG 074
Diagnosis
In the "Personnel Subgroup Grouping for Primary Wage Types" view
(V_001P_K), the employee is assigned to personnel SG for primary wage
types 3. However, this grouping is not valid for wage type xxxx in the
period from 01.09.2006 to 31.12.9999.
Please let me know where i needs to check.
Thanks.try to change the start date and try like 01.01.1990 like this
juss chk and update -
Error in RFx : Item type 'Service' not allowed for this Item
hi , experts,
We use SRM7.0 in Standalone scenario .
i get an error when i transfer SC to RFx : Line 0001: Item type 'Service' not allowed for this Item .
if someone kindly tell me how to correct this Error.
another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
reagrds
claudHi Claud,
SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
Thanks and regards,
Ranjan -
Error-local collection types not allowed in SQL statements
TYPE WEEK_NUM_T IS VARRAY(10) OF VARCHAR2(10);
vc_weeknum WEEK_NUM_T;
SELECT DISTINCT to_char(y.week_number_in_year) BULK COLLECT INTO vc_weeknum
FROM DD_TMP x, TIME y
WHERE x.DATE_TM = y.ORACLE_DATE;
INSERT INTO TMP_HOLD
(SELECT *
FROM TMP
WHERE DATE_TM IN (SELECT * FROM TABLE(vc_weeknum));It seems like the TABLE() function don't work. What is the workaround?You haven't provided enough of your code to tell, but you are probably trying to use a pl/sql type instead of a sql type. Please see the reproduction of error, then correction below.
-- reprouction of error:
scott@ORA92> CREATE TABLE tmp_hold AS SELECT * FROM dept WHERE 1 = 2
2 /
Table created.
scott@ORA92> DECLARE
2 TYPE WEEK_NUM_T IS VARRAY(10) OF VARCHAR2(10);
3 vc_weeknum WEEK_NUM_T;
4 BEGIN
5 SELECT DISTINCT deptno
6 BULK COLLECT INTO vc_weeknum
7 FROM emp;
8
9 INSERT INTO TMP_HOLD
10 SELECT *
11 FROM dept
12 WHERE deptno IN
13 (SELECT * FROM TABLE(vc_weeknum));
14 END;
15 /
(SELECT * FROM TABLE(vc_weeknum));
ERROR at line 13:
ORA-06550: line 13, column 31:
PLS-00642: local collection types not allowed in SQL statements
ORA-06550: line 13, column 25:
PL/SQL: ORA-22905: cannot access rows from a non-nested table item
ORA-06550: line 9, column 3:
PL/SQL: SQL Statement ignored
-- correction:
scott@ORA92> CREATE OR REPLACE TYPE WEEK_NUM_T AS TABLE OF VARCHAR2(10);
2 /
Type created.
scott@ORA92> DECLARE
2 vc_weeknum WEEK_NUM_T;
3 BEGIN
4 SELECT DISTINCT deptno
5 BULK COLLECT INTO vc_weeknum
6 FROM emp;
7
8 INSERT INTO TMP_HOLD
9 SELECT *
10 FROM dept
11 WHERE deptno IN
12 (SELECT * FROM TABLE (CAST (vc_weeknum AS week_num_t)));
13 END;
14 /
PL/SQL procedure successfully completed.
scott@ORA92> SELECT * FROM tmp_hold
2 /
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
scott@ORA92> -
Hello,
Did anyone ever have the same error message 'Payments are not allowed for business unit (6000,568)' so that he can tell me what I did wrong?
I get this message when I click on 'add' on the regular or epress deposit pages
I have set up the payment options at BU Level so I have no idea what to do know.
Regards,
StijnI forgot to creae the group type P ....
-
Message no. AK005 - Asset is investment measure, transaction type not allow
Dear All,
I am getting following error while transfering Investment AuC to Main Asset.
Message no. AK005 - Asset is investment measure, transaction type not allow
I searched the Forum and got some input.., but in that I have a clarification.
Please see my doubt and the forum input.
Internal Order as Investment Measure:
Can you explain me Step 10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88 once again.
How we can give the Receiver Main Asset master in KO88. In KO88 we can only provide the Internal Order. But that Internal Order is already settled to AuC in Step 8.
Please guide me.
Thanks.
Regards,
nms
Re: Settlement of cost center to final asset ?
Posted: Oct 27, 2009 11:40 AM
Hi,
Are you doing any settlement using the AUC asset ?
Normal practice is to Create an Auc Asset and settle cost to Auc. Once the asset is ready for use, finally settle the Auc to final asset.
This can be done in two ways like - line item settlement / investment measure.
Below are steps in two scenarios :
Internal Order as Investment Measure:
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
c. Planning Profile - OKOS
d. Budget Profile - OKOB
6. Create an Internal Order - KO01
a. With the Investment Profile (Step-2)
b. AuC automatically created by the system using Asset Class given in the Investment Profile
7. Post the amounts to IO - FB01
8. Settle the amounts to AuC from IO (Prcg type: Automatic) - KO88
9. Create the Main Asset - AS01
10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88
AuC using Line Item Settlement:
1. Define the AuC Asset Class (with Line Item Settlement) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Order Type (Overhead) - KOT2
4. Create an AuC-Asset (using Step-1 Asset Class) - AS01
5. Create an Internal Order - KO01
a. Assign the AuC u2013 Asset in Settlement Rule in IO
6. Post the amounts to IO - FB01
7. Settle the amounts to AuC from IO - KO88
8. Create Main Asset (using Step-2 Asset Class) - AS01
9. Assign the Main Asset in IO (Step-5) - KO02
10. Settlement AuC u2013 Line Item List - AIAB
11. Settlement AuC - Receiver - AIBU
VVRnms,
Your message is not very clear - while you have mentioned at what stage are you getting the above-mentioned error message, you haven't mentioned exactly what you were trying to do. The fact that you are getting this error is a straight-forward indication that you are attempting to do something that SAP does expect.
However, answering your query about how to use KO88, you have to settle the AuC to a FA (fixed asset, with asset class other than AuC ), as that will close the open AuC, transfer the value from the AuC to the FA and from this point onwards, all transactions will happen to this FA. Your statement "in KO88, we can only provide the Internal Order" is incorrect.
Hope this helps.
Regards
Gulshan -
Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F
Hi Gurus
I have created a webdynpro abap application in which these steps
1. Application triggers the workflow and workitem got created through FM1.
2. Workitem loads up webdynpro abap application from portal or outlook by changing settings in SWFVISU transaction.
3. Application completes the workflow by calling FM2.
Here FM1 is SAP_WAPI_START_WORKFLOW which returns the workitem id. When I am giving the same workitem id in function module SAP_WAPI_WORKITEM_COMPLETE , it is giving me error that Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F
My workflow has only one activity step which is mapped with class CL_PT_REQ_WF_ATTRIBS and method DUMMY. I have checked the synchronous method.
Please let me know how can I correct it.
With regards
Manu SharmaHi
You need to give the workitem id of the dialog task which has been configured in SWFVISU. You will get this workitem id via application parameter in your Webdynpro method.
Wokflow will be completed, if all the steps has been executed
Vinoth
Edited by: S Vinoth on Oct 27, 2010 10:08 AM -
Set type COMM_PR_UNIT is not allowed for product type
Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa RodríguezRosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish -
Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'
Hi All,
I created the wsdl for mobile and I tried to send a SOAP request from Altova XMLSpy. However when I geive the wsdl in 'wsdl file location' I receive the following.
File http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.scenarios.setup/vPac.sap.B1Mobile/001sap0003_sap.B1Mobile.wsdl is not valid.
Invalid XML schema: 'Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'.'
Error location: wsdl:definitions / wsdl:types / xs:schema / xs:element / @type
Any Idea?
VangelisHi,
it seems that Altove did not cope with defaultNs prefix that is used for marking default namespace.
just look up in your <xs:schema > tag what namespace prefix is used for your namespace - you shall find there something like this
<xs:schema xmlns:ns0="your.namespace.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
and replace prefix defaultNs with prefix of your namespace (in example above it would be ns0)
There might be several usages of defalutNs iside of WSDL (at least in my case were two) so replace it everywhere using same approach
Best regards, Artem -
PLS-00642: local collection types not allowed in SQL statements
Hi,
I want to retrieve empno in plsql table.
Now based on the empno in plsql table I want to retrieve thier deptno in another plsql table/varray.
SQL> declare
2 type vdeptno is table of number;
3 v_deptno vdeptno;
4 TYPE e_tab is table of PLS_INTEGER INDEX BY PLS_INTEGER;
5 empno_tab e_tab;
6 Begin
7 Select empno bulk collect into empno_tab FROM emp;
8 FOR i in empno_tab.FIRST..empno_tab.LAST
9 LOOP
10 dbms_output.put_line(empno_tab(i));
11 Select deptno into v_deptno
12 FROM emp
13 where empno=empno_tab(i);
14 END loop;
15 END;
16 /
Select deptno into v_deptno
ERROR at line 11:
ORA-06550: line 11, column 21:
PLS-00642: local collection types not allowed in SQL statementsAny other way to do the same.
TwinkleWhen you use this method ...
type vdeptno is table of number;
v_deptno vdeptno;
You need to allocate space to the object prior to inserting into it , (use .EXTENDS for this). Or you need to initialize it while declaring it.
or try the following
SQL> declare
2 type vdeptno is table of number;
3 v_deptno vdeptno;
4 TYPE e_tab is table of PLS_INTEGER INDEX BY PLS_INTEGER;
5 empno_tab e_tab;
6 Begin
7 Select empno bulk collect into empno_tab FROM emp;
8 FOR i in empno_tab.FIRST..empno_tab.LAST
9 LOOP
10 dbms_output.put_line(empno_tab(i));
11 Select deptno bulk collect into v_deptno
12 FROM emp
13 where empno=empno_tab(i);
14 END loop;
15 END;
16 /
Edited by: user9276238 on Jun 14, 2010 3:26 AM
Maybe you are looking for
-
ITunes does not want to import folder
Hi there. Vista Prof with latest iTunes. I lost my harddrive without any backups of the songs on my iPod. I have read a couple of replies to people with the same problem. One was to import the songs via the "Add folder to library" option. Before I ch
-
How to remove E-Business Suite R12?
On Solaris10, there are the R12 instance -- file system and a db. And there is a different home of Oracle 10g with a few DBs installed. How can I completely remove these? I do not have the Oracle installation CDs of these. I think about: remove the O
-
Problem accessing clicksoft webservice in SAP System
Hi All, We are currently integrating SAP system with Clicksoft. For that, we have received WSDL file from Clicksoft and we are trying to create consumer proxy in SAP system. But, getting error " Attribute "Transport" in <SOAPbind:binding> has incorre
-
Pages show differently in FF 3.5.3 and IE 7
Hi, Since the first ever DW, I haven't had too much trouble with the different displays of a site by FF and IE however ... I have a client who wants everything to be exact in both browsers and I am having great difficulty achieving this. I understand
-
Page-based localization currency not working in crystal report.
Hi, I was trying to test out the page-based localization. [https://boc.sdn.sap.com/node/8501|https://boc.sdn.sap.com/node/8501]. All is well datetime, numeric formatting but the currency symbol is not changing. It always get the symbol in the regiona