ESS CATS user exit not triggered

Hi,
I am making some validations on the time sheet using enhancement cats0006, but that user exit is not triggered in the portal, in ESS.
I have my project activated through tr. CMOD, the user exit is triggered in R/3 using transaction CAT2.
What could be the reason ?
Thanks,
Stefan
Edited by: Stefan Kolev on Jan 24, 2012 10:51 AM

Solved

Similar Messages

ESS CATS User Exit

Hi ,
We are using ESS - Record Working Time service to track employee time.
We have used CATS user exits CATS0006. The standard ESS functionality calls this user exit on "check" , "save", "release" "refresh" actions on ESS screen. So the functionality in the user exit is executed multiple times and this does not work in our scenario.
Is a way to perform certain actions upon saving the time to the database from ESS ?? or how can I distinguish between "check" and "save" actions in the user exit.
Pat.

Hi Pat,
You may simply check SY-UCOMM to determine which action has generated the execution of your User Exit.
The value of this system variable will provide you the information of function that was called by the user.
Cheers,
Thierry Bodson.

Notification User-Exit not triggered

Hi all,
We have configured the system to automatically create a notification when creating an order (Define Notification and Order Integration)
However, when saving the order (without accessing the notification) we find that the Notification save user-exit (QQMA0014) is not triggered.
Has anyone found a work-around for this?
Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=328408]
PeteA

Pete,
It is a common issue. The logic of not calling this exit being that it can prevent notification save and that is not desirable when created in conjunction with the order.
No specific workaround that I know. Depending on what you exit does it might be possible to duplicate the logic into one of the order exits/Badis. Alternatively into a notification exits that is called - generally at create rather than at save - QQMA0025 for example.
-Paul

User-exit not triggered(variable)

Hi mates,
I have two variables A (fiscal year), B(calmonth interval) and both of type user-entry(replacement type). I defined C varible of type user-exit(replacement type). In C, i'm reading A & B values and checked whether B's interval is in A.
eg: A input is 2007 (means 04.2006 to 03.2007).
B input interval 03.2006 to 10.2006.
In C i'm checking whether B's interval is in A (fiscal year).
Based on B's value, dynamically i have to show input & output layouts. I defined one function module for C, but it's not triggering after entering input values in plng folder.
How to trigger user-exit immediately after user enter input values? (without selecting dependent input or output layout tabs, these input or output layout uses varible B interval values for dynamically showing calmonth columns).
Previously i defined few varibles like above, there user-exits triggered only after i choosing related input or output layout tabs.
thanks,
Raju

The user exit written in the variable will be triggered if that variable is used anywhere in folder or layout or function or called in the logic of any other variable. In your case, C is not used anywhere that why it is not executing this code. For the required functionality, you have to create planning function of type exit and place this code. Run this function on layout open or folder opening something like this.

User Exit that triggers for Change operation

Hi All..
I want a user exit which triggers when I enter into an infotype(2001) from tcode PA30.
My actual requirement is to show the field REFNR in display mode.
By using the exit PBAS0001 exit0001 I can make the field REFNR in displaymode for create operation.
But in change operation of the infotype the exit is not getting triggered.
Regards,
Anji.

chk these
Transaction Code - PA30                     Maintain HR Master Data
Enhancement/ Business Add-in            Description
Enhancement
PBASRP01                                PA: User exit distributed reporting
PBAS0002                                PA: Enhancements for Personnel Administration - Menu
PBAS0001                                PA: Pers.Admin./Recruitment: Default values and checks
PARA0002                                Enhancement for Calculating Annual Salary; IT0008,14,15
PARA0001                                Enhancement for Determining the Number of Periods
HRRPAI01                                User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
HRPC0001                                HR: PC download authorization
HRPBAS01                                User Exit for HR Master Data
Business Add-in
HRPAD00_PREM                            Definition of User Exit for Collective Search Help PREM
HRPADUS_PBAS_0001                       Customer Exit for Message handling
HRPAD_SUBTY_CHECK
HR_F4_GET_SUBTYPE                       HR: Entry help for subtypes
HR_FAST_ACTION_CHECK                    Check fields on the fast entry screen
HR_INDVAL                               HR: Indirect wage type valuation
HR_SET_PKGAB
HRPAD00_RECOG_SCREEN                    Employee - Recognition Screen
HRPAYXX_DELETE_PERNR                    BAdI for Reports Deleting Personnel Numbers
HRPAD00_PAPM                            Definition of User Exit for Collective Search Help PAPM
HRPAD00_GET_AF_0008                     Additional Fields for Basic Pay Infotype (0008)
HRPAD00_ENTRY_LEAVE                     HR_ENTRY_DATE and HR_LEAVING_DATE
HRPAD00_ADRS                            HR: Address formatting
HRPAD00MGEACTIVATION                    Activation Action BAdI for Global Employees
HRPAD00INFTY                            Update / Infotype maintenance
HRPAD00AUTH_TIME                        Time Logic in the PA Authorization Check
HRPAD00AUTH_RECORD                      Spanish Data Privacy Law: Exit for Recording
HRPAD00AUTH_CHECK                       HR: Authorization Check
HRIV_REDUCE_AMOUNT                      Reduction within Indirect Valuation

Which user exit is triggered on Save of CV01N/CV02N

I have some requirement to be triggered on the Save of a document using CV01N/CV02N.
I found three exits in the transaction EXIT_SAPLCV110_001, EXIT_SAPLCV110_002, EXIT_SAPLCV110_003 but none of them get triggered on Save even though I have activated the enhancement.
If someone knows which user exit gets triggered on Save of CV01N/CV02N please let me know.

You can use BADIs.
You can use DOCUMENT_MAIN01.
Go to SE18. Display 'DOCUMENT_MAIN01.
On the menu bar, Click on Implementation > Create.
Give your own implementation name starting with Y or Z.
There's a method called BEFORE_SAVE in this.
It has all the data DRAW, DRAD, DRAZ etc as Changing Parameters.
So you will be able to manipulate that data in that method.
Activate the implementation And you are good to go.
Reward if helpful.

How this user exit MWMRF102 triggered in tcode LM05

how this user exit MWMRF102 triggered in tcode LM05. could somebody help for this procedure
thanks in advance
rakesh

Hi Sairam,
Goto the program for transaction VL10G.In that u make a seach for the user-exit
USEREXIT_PREPARE_LAYOUT_FILL.Then write the logic inside tht.U will need an access key for that.
Reward points if it solves ur query or answer is helpful
Thanks
Chinmay

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

User-exit not getting triggered in VA32

Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.

Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks

User Exit not getting Triggered in Quality Server

Hi,
In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
which is getting triggered in Development server.But when I moved it to Quality,
The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
and that in turn is assigned to Project, still the problem persists.
Can any one suggest me what could be the problem.
Regards,
Kiran B.

Kiran,
Check the Project of that enhancement is active or not. not the enhancement.
<REMOVED BY MODERATOR>
Satish
Message was edited by:
Alvaro Tejada Galindo

User exit not getting triggered while creating the vendor

Hi all,
I wanted to extend the idoc(crermas01) according to my reqiurement.
But when I am trying to create a vendor using the IDOC cremas01 the user exit EXIT_SAPLKD01_001 is not getting triggered.
Can anybody tell me the reason why it is happening so...........
Thanks and regards,
Vinil.

Is your Idoc generated after the execution?
Where is you break-point, it is inside EXIT_SAPLKD01_001. Please note FM EXIT_SAPLKD01_001 will not be called unless it is implemented using project (CMOD) and project is active.

User exit not stopping

Hi All,
I am MM consultant, i need help with user exit.
I am trying to test if one user exit M06B003 would be triggered before saving the Purchase Order in ME21n.
I have gone to SMOD, opened this user exit, it opened a function module by name EXIT_SAPMM06B_001.
In this function module there wasa include module ZXM06U18.
I have selected a beak point on this include.
and created a newsesion with ME21n.
when i fill up all details, and saved, it got saved and gave a PO number, it didnot stop at that user exit.
what might have went wrong. this exit is not yet used, not atleast once.

Hi Vinay,
Not sure about the exit you're using. However it's important to have in mind that the user exits works only in determined code functions. For example, that exit you're using maybe it doesn't goes through when you save the document. Maybe it's for the validation when you enter some field in the PO.
You should check if this is the case. If this scenario does not fit to your requirement you should try to find another exit for the moment of saving the document with the data you need.
Hope it helps.
Regards,
Gilberto Li

User Exits / BADIs triggered during the Material document creation

Hi Experts,
Can anybody tell me the User Exits / BADIs /Possibilities that can be triggered during the Material Document Creation which can be used to update the Equipment Master User Statuses.
Thanks,
Sangeeta.

Hey Sangeeta,
Try these User Exit's
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Using Enhancement MGA00001 (Function Exit : EXIT_SAPLMGMU_001 ) you can validate & Change your Material Document Number.
Badi's
BADI_EAN_SYSTEMATIC
BADI_GTIN_VARIANT
BADI_MAT_F_SPEC_SEL
BADI_MATERIAL_CHECK
BADI_MATERIAL_OD
BADI_MATERIAL_OD
BADI_MATERIAL_REF
BADI_MATNR_CHECK_PVS
BADI_MM_MATNR
BADI_MM_MATNR
CDT_CHECK_MATERIAL
MG_MASS_NEWSEG
MG_MASS_NEWSEG
WRF_DISCONT_FACT_E
Note: This is for transaction code MM01, MM02 & MM03.
Regards,
Saravanan M

CATS user-exit

Hello,
We have added a custom field (say cust01) to the CAT2 transaction to enter working time and it works fine. However, when absences are entered, we would like to have this cust01 values at the staging table. But based on certain situation we do not want it to be transferred to the time infotype.
Is there any user-exit to analyze the data in staging tables like PTEX... and decide what needs to be transferred to the infotypes.
Thanks in advance for all your information.
Regards,
saplover

Hi,
Check this thread for the user exits in CATS.
Re: User exit in CAT2
Regards,
Manoj.

ESS Pa30 user exit

Hi All,
I am new to Portal and ESS but need to duplicate a user exit we have on PA30..
I.e. we have an exit that catches when a users benefits are updated and loads a custom table, as well as a few other things, i was hoping the when this info was updated on ESS that it would fire the same exit, but it does not it is directly getting updated without trapping the user exit.
So thoughts on what exit ESS calls when you update PA30 info?
Thanks!
-Jason

i did try implementing that badi, as well as HRPAD00INFTYBL
but i am finding that they only catch on the review and modify step, not the save step.. i may be using the wrong method, but i don't think so.
-Jason

ESS CATS user exit not triggered

Similar Messages

Maybe you are looking for