ESS-Changing dependent information

Hi gurus,
If the employee changes his dependent information on ESS is there any standard workflow which triggers and goes to administration. When administrator approves that informations should be updated on R/3.
Can we use BP ERP2004(Clock in/Clock out) ivew in EP 7.0(we are downloading BP ERP 2005).
Regards,
SAP

whether its manager or adminstrator, really depends on your workflow setup for PCR.
For leave ESS, after the workflow is completed ie approver(manager/HR admin), a program needs to be run to update into ECC/R3.
I believe its the same for PCR, you need to check out this on your system.
hope it helps

Similar Messages

Process to restrict an employee to change personal information in ESS

Hi,
As per the requirement, in ESS, Personal information should be in Display mode but here employee can change his personal information like Bank details [IT0009], Family details [IT0022], Address [IT0006] etc.
So please guide to restrict an employee to change personal information in ESS.
Thanks,
Abay

Hi,
Thanks for the update.
Do you have any document on the same?
Thanks,
Abay

Volume Drop Problem (changes depending on how held)

The speaker volume on my iPhone changes depending on how it's being held. I surely hope this isn't considered a "feature". Held at a diagonal angle tilted backward, the volume drops considerably. It seems to play normal only when fully flat, or vertical.
Anyone else have this problem also? I'm considering exchanging it for another.

Don't you think it might just be a little useful to know what normally happens? I mean, you do realize that some phones sound silent when you tilt them a mm, while other phones sound almost the same no matter where you hold them. You do get that the difference in volume for the iPhone speakerphone when placed on a solid surface is much more dramatic than the changes in volume most other phones have due to placement, thus it's not something everybody thinks of right away.
Nobody tried to tell you that the sound waves were effected by gravity and the phone would be louder if you held it over your head right?
Read the first post again and think about it; 'speaker' refers to any sound emitting device like the 'headset', 'earpiece', or 'speakerphone speaker'...which you might even call the 'speaker speaker' or just 'speaker', regardless of how you define the parts; other people toss around the terms as if they are interchangeable. The post just says speaker.
If you are so bright then why are you asking a question at all? You know that if you move your body and the phone at the same time the volume shouldn't change. I mean..sure gravity does make the soundwaves drop quicker and all that so when you walk up an angled driveway the phone needs to adjust the volume, but that's only a little bit...not 'considerably' right?
Let's think for a second (or less for some of us). First, 'I was concerned some engineer mightve mistakenly thought of this as some cockamami "feature"'. Know what? It's a good idea. I wouldn't half mind a phone that could adjust the volume when I moved it to or from my ear or body. Seamlessly changing from the EARPIECE to the SPEAKER would be a great thing too. Things like switching from the bluetooth HEADSET to the SPEAKER are nice touches. I think you have an advanced model or a special feature.
It's also a little difficult for people to know how much your phone changes in volume when they can't hear it. It's not like there's a recording or some empirical data like 'hey, when I tilt my phone at a 45 degree angle it drops 20 decibels'.
As to 'reflected acoustics?!?!', I think the post starts with "speaker volume" and continues to 'when fully flat, or vertical'. Fully flat sounds like your phone is sitting on a table, shelf, or the floor and since I don't put my phone on a block then lay down on the floor with my ear above it to make a call I think the description sounds more like the speakerphone portion than the ear 'speaker'. Stating what the SPEAKER should do when normally performing in answer to a question should be considered informative and useful because : If you knew what the speaker was supposed to do you would not have asked.
Yeah, you never know who is using an iPhone or posting in the forums, but it doesn't take very long to read through the posts and find the information you want when you post a clear question in the first place.
I don't consider my phone a derogatory TLA, but if that's what you think of the product then I hope you enjoy your old phone.
Don't let the bass fall on your foot on the way out.

I have a new email address and was successful in changing that information on line but my phone and iPad does not recognize the new address and I cannot update anything. It also does not accept the password associated with the old email address/Apple ID

I have a new email address and was successful in changing the information online but cannot change it on my iPhone 4S or iPad. When I try to fix the problem it requires me to create a new password and now I can't remember that either.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT5787 My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

Contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

Can't change any information in my Apple ID except my name

I have had my Apple ID for years - during .mac and Mobileme and I have always had the same ID.
Now when I try to update any information except my name it doesn't show any change at all.
I can't update my phone numbers or edit/delete/add alternate email addresses and emails for verifying email accounts are not sent?
My Apple ID is fully working - no problems at all with anything.
It is just that I have changed my phone numbers and alternate email address and now I can't change it in my Apple ID.
Please notice that I am NOT trying to change my Apple ID - I want to keep the primary email address and Apple ID just the way they are (my [email protected] address)
I just want to be able to add and delete alternate email addresses and to be able to verify them.
The support from Apple's side on this issue is very unacceptable - they will only talk with me if I am on an Apple Care plan.... or charge me.
How can they even think of charging people for their own malfunctioning services??
I REALLY hope that I can get a solution from you guys!!

I am having the SAME problem.
I just switched to the Icloud merge today. I too have had a .mac account for quite some time.
I need to change my alternative email and some other info, as well as my time stamp is wrong for emails in my inbox and I can not change anything about my account in general.
Heck, I don't even know WHERE to look to change my account information.
Again - I want to change account information, NOT my Apple ID.
The email problem is very concerning since it's about 6 hours off and I needed to reply to some contacts in a timely manner. I have no clue when they could have been sent in real time.

What is the icon on the far right that looks like a circle and has a small number that changes depending on the website page? in the bottom right edge of

I am wondering what this thing is.
It is an icon located on the far right of the page next to the search toolbar. It is shaped like a circle with a number on the bottom right edge. The number changes depending on which tab I have opened. An empty tab has no number. This page results in a 1. I have another page open which results in a 4. The number shows white in a small orange box. The circle is outlined with a thick black line. What does this icon indicate?
Thank you.
John

Hi John, I'm guessing that icon is created and updated by an extension. I'm not sure which one, though. Maybe something that is tracking the trackers, like Lightbeam? Have you tried hovering your mouse over the icon to see whether a tooltip appears, or clicking it?

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command.

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.

If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection.

I can't change any information for any songs in my library, everything is just greyed out. How can I get the ability to edit my song information?

I can't change any information for any songs in my library, everything is just greyed out. How can I get the ability to edit my song information?

I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt!

ESS Change of Address REQUESTED process

Hi all,
I had ESS Change of Address working since 2003. Now, I am having issues. Don't know when something changed, but in last year.
Any answers to any questions would be appreciated and if I need to clarify, by all means, let me know and I will break it down. I see an OSS Server Message coming anyway...
When I org designed a Change of Address WF in 2003, a user would (Edit OR Delete) a record, then it would create 2 locked records, and send only 1 REQUESTED event to start my WFs. HR would verify new record, unlock new record would automatically delimit old, and all is golden.
1.
Via Portal, user Edits address record, it creates 2 locked records in pa0006, and NOW it sends 2 ADDREMPUS->REQUESTED events. I think there is an oss note to stop 2 REQUESTED events in in srv pk 43.
SAP Note 1565056 - Function HR_EVENT_CREATE is triggered twice
Corrects WF from being called twice?
Also, if our HR service center processes the new locked record, it is not automatically delimiting the old record. Can't navigate to it in PA30 because it is already delimited and it is causing a lot of locked records in system. Can't get to it using nav left / right button because it is delimited. From my notes, HR svr cntr should only see the new locked record, verifies, unlocks, then that action is supposed to delimte the old without HR actually unlocking both. This ring a bell?
2. I have the same issue with Delete, except it only starts 1 WF, when it locks. Still trying to figure out why 'sometimes' it does not lock or raise REQUESTED or locks and no REQUESTED event. Elusive little bugger!
3. 1 day rule? If HR unlocks all records and then user makes another change on same day as updated by HR personnel, I get a locked record and no REQUESTED event.
This is not working right!
OSS notes? And more importantly, is this indeed how this "supposed" to work?
We are on ecc6 and hr srv pk 604-41.

So, this is same solution for both PA30 and the call from Portals?
Oss Note 0001565056:
When an infotype record is maintained in the transaction PA30, the function
HR_EVENT_CREATE ('Create Event for Employees and Applicants using Infotype
Operations') is called twice.

Changing file information for music

I have some mp3's on my computer, and I've noticed that if I right click them and select "Get Info", in the "More Info" section there is information like album name, genre, authors, title, and so forth. My question is, how do I change this information? I know that you can drag a file into the iTunes library and change it from there by right-clicking and editing it, but is there a way to change this information outside of iTunes, so that when I select "Get Info" for a file that has not been imported into iTunes, it says the album name and song title and so forth that I want it to say, and not the one it's set to now? Can I change that information?

You need to edit the mp3 ID tag. You can do this in itunes, or you can use a seperate program. The finder is not an mp3 tag editor. I use itunes, but there are others.
google "os x mp3 tag editor" (without quotes) you'll find some.

ESS change own data

Hi SDN.
Hi,
We can update field USRID IT0105 subtype u2018CELLu2019 via ESS change own data service . But how can we make this field just for display (not change)?
Best regards,
Maria João Rocha

Hi Maria,
Login to your portal system (make sure you have content admin role assigned).
Locate the iview in PCD that you would like to personalize.
(ESS iviews should be under Portal Content - Content Provided by SAP - End User Content - Employee Self-Service.)
Right click on the iview and preview it. Once the iview is loaded, use Control + Right click on the UI element you would like to customize.
Save your changes and make sure to make your changes "final".
Thanks,
Shanti

I don't live in Italy anymore but in Switzerland and I can't change this information to do my payment

I don't live in Italy anymore but in Switzerland and I can't change this information to do my payment. How can I do to change the country ?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

Numeric format changes depending on Driver Version

Scenario: JAVA application accessing Oracle 8.1.6 with last Oracle 9.2.0 JDBC Driver (classes12.zip) JDK1.3.
We have found numeric format changes using old oracle.zip and new classes12.zip.
With oracle.zip value 0.346 is returned
With classes12.zip value .346 is returned.
Why the format change depending on the driver version?
Is the new format the right one?
Many thanks.

If you're working in CMYK, "softproof" your colors by choosing View->Overprint Preview. Note the keyboard shortcut
If you're working in RGB, make sure the Creative Suite color management is synced. This is done through Bridge. May I suggest looking that up in Adobe Help.

Changing file information quest

I have the Rhapsody To Go service, which allows me to transfer as much music as I want for 5 bucks a month. This service also does the music transferring for me, no Creative Mediasource required. So my question is:?After transferring music to my player (getting a Vision M) with Rhapsody, can I?then use Creative Mediasource to change file information and tack on album art to music files?

yes i do beli've you can if not use wmp

ESS-Changing dependent information

Similar Messages

Maybe you are looking for