ESS Claims workflow ws18900023

Dear friends,
Need steps to trigger WS18900023.config part done.is there any standard class for it.standard task 18900010 added in swfvisu.
Thanks in advance.

Hi Sridhar
Kindly check whether the Workflow is maintained as a General task or not. to check that proceed the following steps
T-code: PFTC
now u need to click on the step to view the complete details
now we need to click on Attributes button & select General Task option and click on transfer button to complete the task. and to make them active we need to click on Generate button.
after Clicking on Generate make sure you activate the workflow
Hope this Info will be useful
Cheers
Pradyp

Similar Messages

  • Determining second level approver for travel expense claim workflow

    Hi Experts...
    In Travel Expense claim workflow,we are using two level Approval.The employee has to enter his data for expense claim through ESS..Then expense claim is submitted and sent via workflow to the Travel department. Travel Dept verifies the expenses against the bill and approves the claim by selecting the next level approver and attaching the scanned copies of the bill.
    I made copy from the standard workflow WS20000040.
    How can i select the next level appover in first level approval step???
    Is there any FM or BAPI or BADI???
    Please help me ...
    Thanks in Advance
    Regards,
    Hemalatha.

    Hi Hemalatha,
    I have small tricky workaround to find out the second level of approver.The Standard Rule available can reused again by passing manager's Position.i.e
    After first level completed , store manager position in container variable and pass it to the same task rule so the task is sent to the manager's approver .
    Message me if needed more details.
    **Award Points if useful

  • ESS Claims - Requested value Rs. 20000 is greater than balance eligibility

    Dear All,
    While Approving the ESS claims request getting a error message Requested value Rs. 20000 is greater than balance eligibility value 0.00.
    Help in solving this issue.
    Regards,
    Potru.

    Hi,
    This is a correct error. Please check the balance amount in infty 45 for the particular loan type. The loan request should not exceed that.
    Hope this helps
    Regards
    Roy

  • ESS Claim Advance Approval screen showing incomplete list of requests.

    Hi Friends,
    In ESS Claim Advance Approval screen we are facing this issue.
    When approver opens the screen for approving the request.
    The list of requests appear but its not the complete list.
    There are also 2 sucess messages that get displayed.
    112 records found for the selection
    Only 10 of 112 records loaded which meet the selection criteria
    Users are able to see the rest of the request at r/3,
    also if they approve the first 10 request then they are able to view the next slot of requests.
    Any guidance as where the configuration for this could be checked.
    Regards.
    Edited by: SAP Portal Deve on Sep 20, 2011 2:41 PM

    you mean number of requests in UWL?
    Please specify
    http://help.sap.com/saphelp_afs64/helpdata/en/56/15681955744ec8877931c56607ec35/frameset.htm
    Edited by: Siddharth Rajora on Sep 20, 2011 8:08 PM

  • Ess/Leave Workflow Still In Process(In a specific snario when Escalated )

    Hi Guru's,
    I have a problem with Ess/Leave workflow.
    when the leave is applied from the portal which is triggering workflow and reching to the right agent and when the leave is withdrawn , then which is completing the workflow which is fine.
    Recently i have added Escalation functionality using deadline monitoring which is working fine.
    But when the leave request is escalated and withdrawn from the initiator is not changing the status of the workflow to be completed and still continuing in the Still In Process.
    To complete the workflow ,there is an wait event after the approval process which is waiting for the status change for posted or withdrawn or error and working fine when the work item stayed with the direct manager and no escallation is happend.
    When Escalation happend and the leave is withdrawn the status is changing in the workflow container to withdrawn but the event is not firing in the wokflow which needs to be triggered to complete the workflow which is not happening and the work item keeps on escalating to the other managers.
    Please help me ASAP and let me know if anybody not clear about anything.
    Regards,
    Raj.
    Edited by: rajasekhar bhupathyraju on Sep 6, 2010 11:46 AM

    Helo Every one,
    thanks for your inputs,
    I m not sure that wether i explained properly or not.But i will try to explain more elobrately.
    My leave request workflow is Zworkflow which is working fine in the production.Recently in the last month business request for escalation of leave request when direct manager not approved with in the time frame.
    So i added latest end to the Approve task which uses the ABAP class CL_PT_REQ_WF_ATTRIBS and Method Dummy.
    So the task has 3 outcomes one is deadline reached,process obsolete and processed. and after that i added a loop which will create new work item when escalated.
    When i apply a leave on the portal the workflow is triggering and stopping in the Approve step in the log which is fine and when i with withdrawn the leave without any escallation it is taking one of the brach Processed which i mentioned above and reaching to the event and completing the workflow which is 100%.
    When the direct manager doe'nt approve then it is escallating to the next level manager which is fine.Once the escallation happen and the leave is withdrawn by the Employee(Initiator) then it is not taking any of the 3 paths which i mentioned above and not reacting at all.But the status in the workflow container REQ.STATUS is changing to "WITHDRAWN".
    The same thing is happening for the APPROVE once escallation happens.It keeps on escallating even the leave is approved and posted in the database.
    Please reply me if you are not clear.
    Thanks,
    Raja.

  • ESS -CLaims

    Hi ALL ,
    we are doin configuration for ESS claims in ECC 6.
    Our screen has Reimubersement types then request types and scheme type.
    for some employees we are able to see 3 reimbursement types namely LTA, office expences and medical but for some this dropdown box shows only 1 or 2 options.
    please telll me from where we configure reimbursement types in claims
    if its depends upon ESG then wher we maitain
    thanks in advance

    thanks for the reply.
    i have checked that table but still i am unable to understand how it is reflecting  in drop down of reimbursemnt types on ESS page

  • Error in ESS claims Functionality

    Hi all,
    We are on track for implementing Standard ESS Claims Functionality.
    While taking advance there is no issue but when we go for Claim Against
    Advance it is throwing error as
    1. LTC Block Start and End Year not maintained in V_T511K
    2. There is no eligibility for any of the dependents for LTC scheme (SLTA:CA:LTC:20110326).
    While debugging we have come across that while call function to
    HRXSS_IN_CL_SLTC_ELIGIBLITY there is no begda maintained in parameter
    ifd_edate = pds_reqdt-trnsd-begda but when we see in table V_T511K  LCT
    Block start and end dates are maintained. PLs guide .
    Component details
    SAP_HR 604
    Portal Version
    EHP1 EP 7.01
    Regards,
    Soni

    Dear soni,
    Can you please send  config steps for LTC claim via ESS.
    Urgent requirement Please help.
    send to kseenu019 at the rate gmail dot com
    Thanks and Regards
    Srinivas

  • Need Ess/Mss Workflow Scenarious tutorials ?

    Friends,
               Can u Send me the links for downloading the ESS / MSS workflow scenarios... I searched in the net and the forum i didnt get the correct link... Hope u guys ill help....

    This describes a simple HCM Forms WF Scenario:
    [url]http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/45/74f4abd6e74d7aaaa4cc02c81be7c5/frameset.htm[url]

  • ESS and Workflow Integration?

    Hi Expert,
    Can somebody tell me what is the correlation between ESS dan workflow, does ESS has the same exact effect as the GUI? I mean if someone who access the GUI changed somebody address then the WF will be triggered, but what if the employee him/herself change the address? would the same WF triggered? or we have to write another one?

    Hi vijay,
    Check out this links,this might help u better.
    http://help.sap.com/saphelp_erp2005/helpdata/en/c5/0fab358b096510e10000009b38f839/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/44/2bc9367a23fb68e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/cf/5e9b38f8236e6de10000009b38f842/frameset.htm
    Regards,
    Nagarajan.

  • Custom ESS Advance Claim Workflow

    Hi,
    1. I have a scenario in ESS: Advance Claims, where in we need to n-level Approval.
    Could any one throw some light on this ?
    2.As of now I have activated the standard wf template, WS18900023, for one-level approval,  and it is getting triggered.
    But, when the approver approves the request, the status shown in the Request Creator's inbox is:
    Request Phase : In-Process
    Request Status : Partially Approved
    But, if a request is rejected,  the status is :
    Request Phase : Completed
    Request Status : Rejected
    I have implemented a BADI: HRPBSIN_NEXT_APPROVER with the logic, just to determine the
    method IF_AC_NEXT_APPROVER~GET_NEXT_APPROVER.
    IFD_ALGRP = 'NLE5'.
    EFD_APERN = '969'.
    EFD_APGRP  = 'DEFAULT_GROUP'.
    IFD_ALGRP = 'NLE5'.
    EFD_APERN = '6601'.
    EFD_APGRP = 'DEFAULT_GROUP'.
    endmethod.
    3. Can any one tell me, where the workflow template (WS18900023) is being retrieved from, when the claim request is created?
        I mean, by means of any configuration or std code ?
    Thanks,
    Sai.

    Dear Vivek,
    Thanks for your response.
    Actually, the workflow is being triggered. So, why do we need to call this RFC function module ?
    Also, even, if we call this RFC function module, what parameters do we pass to the wf template?
    One of the wf container element in the std wf template - WS18900023 -Request ( ZAMCLASS ) whose type ' CL ABAP Class ' does not exist in the system.
    So, how do we populate this container element?
    Thanks

  • Standard Workflow Tables for ESS Claims

    Hi Experts,
               We have configured the ESS / MSS Claims process in R/3, Portal and Workflow. Once I am applying claim in portal and approving the claim. I am running the standard program to update the infotypes. Now my query is, where these datas will be stored in the backend. When the user is required to view the datas how should they might check these datas except through infotype. I have checked the standard tables there is no data available.
              Kindly reply me as soon as possible.... So that I have process it further
    Regards,
    Kannan
    Edited by: Kanna83 on Dec 21, 2011 6:35 PM

    Dear Siddharth,
    Thanks for your valuable reply.
    But in the table T77WWW_CLTRANSD  we are not able to see any records getting stored.
    How to view the records in the table T77WWW_CLTRANSD?
    Can u let us knw that the table T7INCLM_ADV_TRNS ( Claims & Advance Transaction Table )  will get updated or not???
    Is there any report to update the table T7INCLM_ADV_TRNS.
    Please let us knw.
    Thanks,
    Nalla B.

  • ESS Claims UWL error

    Hi All,
    I have configured the Claims service in ESS and i am getting the work item in UWL in approver's tasklist. But when i click on the task item, it redirects to SAPR3 EASY ACCESS MENU and gives the error that WORKITEM CAN ONLY BE EXECUTED USING THE PORTAL AND UWL.
    I have maintained the SWFVISU transaction for taskid TS18900010 and given the APPLICATION NAME and PATH. But still no use.
    Can anyone plz advise on this
    Thanks and Regards
    Reshma

    Hi Reshma,
    I think there is an error in the configuration. Could you give a bit more info? Which workflow are you using (standard or custom?). What system are you on ECC?
    I also checked for the task you mentioned, but it is not available in ECC 5.0.
    Also when you cross post in different forums mention this in your post.
    Regards,
    Martin

  • ESS Claim Application Behaviour

    Hi ESS Experts,
    I have configured Claims Functionality.
    Now when I am trying to raise new claim request, system is not displaying Dropdown LOV's. It was properly and i was able to update records in R/3.
    We have not done any changes in Configuration .. I am using Java Application for Claims ..
    and the strange thing.. when I am checking with same user using Reimbursement Approval Link then system is showing the LOV's..
    I don't know why system is not showing LOV in one link but in other its is showing.
    Please suggest solutions.
    Thanks
    Puneet

    Issue resolved by self. There was some JCO connection error.

  • Error while approving time sheet in ESS using workflow

    Hi Experts,
    We have created a data entry profile for ESS time recording and in that we have used the  standard task id TS20000460 for SAP workflow with auto determination of recipient. Whenever employee enters the time and save it the workflow is trigring and its going for manager's approval. But however when manager trys to approve it's throwing below error.
    Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.mss/com.sap.pct.erp.srvconfig.CatsApproval/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.ManagerApprove failed.
    Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.mss/com.sap.pct.erp.srvconfig.CatsApproval/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.ManagerApprove failed.
    I have maintained below mentioned configuration.
    I have created a Approval profile and assigned the same to managers using CATS_APPR_PROF user parameter.
    Please help in rectfying the problem
    Regards,
    Koutilya A.K

    check in the portal if the ID's exist
    Also, check if the manager has authorization's in the portal for the objects

  • ESS Claims: Reimbursement types not appearing in portal

    Hi ESS Experts,
    I have done al the configuration required for Claims functionality and it was working fine also.
    Now I am not able to see cliam list in ESS application. I using Java Application.
    T7INT9 and A9 tables are cofigured and eligibility is showing in HINCREMS also
    Kindly provide the solution.
    Thanks
    Puneet

    Hi,
    Execute the report HINCREMS with out giving any Reimbursement type in the selection screen and let us know the result.
    Regards,
    Jyothi

Maybe you are looking for