ESS -CLaims

Hi ALL ,
we are doin configuration for ESS claims in ECC 6.
Our screen has Reimubersement types then request types and scheme type.
for some employees we are able to see 3 reimbursement types namely LTA, office expences and medical but for some this dropdown box shows only 1 or 2 options.
please telll me from where we configure reimbursement types in claims
if its depends upon ESG then wher we maitain
thanks in advance

thanks for the reply.
i have checked that table but still i am unable to understand how it is reflecting in drop down of reimbursemnt types on ESS page

Similar Messages

ESS Claims - Requested value Rs. 20000 is greater than balance eligibility

Dear All,
While Approving the ESS claims request getting a error message Requested value Rs. 20000 is greater than balance eligibility value 0.00.
Help in solving this issue.
Regards,
Potru.

Hi,
This is a correct error. Please check the balance amount in infty 45 for the particular loan type. The loan request should not exceed that.
Hope this helps
Regards
Roy

ESS Claim Advance Approval screen showing incomplete list of requests.

Hi Friends,
In ESS Claim Advance Approval screen we are facing this issue.
When approver opens the screen for approving the request.
The list of requests appear but its not the complete list.
There are also 2 sucess messages that get displayed.
112 records found for the selection
Only 10 of 112 records loaded which meet the selection criteria
Users are able to see the rest of the request at r/3,
also if they approve the first 10 request then they are able to view the next slot of requests.
Any guidance as where the configuration for this could be checked.
Regards.
Edited by: SAP Portal Deve on Sep 20, 2011 2:41 PM

you mean number of requests in UWL?
Please specify
http://help.sap.com/saphelp_afs64/helpdata/en/56/15681955744ec8877931c56607ec35/frameset.htm
Edited by: Siddharth Rajora on Sep 20, 2011 8:08 PM

Error in ESS claims Functionality

Hi all,
We are on track for implementing Standard ESS Claims Functionality.
While taking advance there is no issue but when we go for Claim Against
Advance it is throwing error as
1. LTC Block Start and End Year not maintained in V_T511K
2. There is no eligibility for any of the dependents for LTC scheme (SLTA:CA:LTC:20110326).
While debugging we have come across that while call function to
HRXSS_IN_CL_SLTC_ELIGIBLITY there is no begda maintained in parameter
ifd_edate = pds_reqdt-trnsd-begda but when we see in table V_T511K LCT
Block start and end dates are maintained. PLs guide .
Component details
SAP_HR 604
Portal Version
EHP1 EP 7.01
Regards,
Soni

Dear soni,
Can you please send config steps for LTC claim via ESS.
Urgent requirement Please help.
send to kseenu019 at the rate gmail dot com
Thanks and Regards
Srinivas

ESS Claim Application Behaviour

Hi ESS Experts,
I have configured Claims Functionality.
Now when I am trying to raise new claim request, system is not displaying Dropdown LOV's. It was properly and i was able to update records in R/3.
We have not done any changes in Configuration .. I am using Java Application for Claims ..
and the strange thing.. when I am checking with same user using Reimbursement Approval Link then system is showing the LOV's..
I don't know why system is not showing LOV in one link but in other its is showing.
Please suggest solutions.
Thanks
Puneet

Issue resolved by self. There was some JCO connection error.

ESS Claims: Reimbursement types not appearing in portal

Hi ESS Experts,
I have done al the configuration required for Claims functionality and it was working fine also.
Now I am not able to see cliam list in ESS application. I using Java Application.
T7INT9 and A9 tables are cofigured and eligibility is showing in HINCREMS also
Kindly provide the solution.
Thanks
Puneet

Hi,
Execute the report HINCREMS with out giving any Reimbursement type in the selection screen and let us know the result.
Regards,
Jyothi

ESS Claim and Reimbursement

Hi
I am not able to get drop downs for claims and reimbursement type in ESS, has configured R/3.
Pls. guide.
Thanks

Please check in SPRO you have maintained the help for this.

Error in ESS Claims: Field outlook cahracetrs have not been maintined

Dear Experts,
We are having an error in the ESS qualty ..in the Reimbursement and claims screen. When we click on this link we are getting a warning message "Field outlook cahracetrs have not been maintined".Only default reimbursement types LTA and Medical allowance are appearing in the drop down for reimbursement type. All the paroll allowance groupings and claims configuration have been done. Please let us know the possible cause for the error.
Note: The problem persists in Quality but working fine in Sandbox

Any inputs??

ESS Claims UWL error

Hi All,
I have configured the Claims service in ESS and i am getting the work item in UWL in approver's tasklist. But when i click on the task item, it redirects to SAPR3 EASY ACCESS MENU and gives the error that WORKITEM CAN ONLY BE EXECUTED USING THE PORTAL AND UWL.
I have maintained the SWFVISU transaction for taskid TS18900010 and given the APPLICATION NAME and PATH. But still no use.
Can anyone plz advise on this
Thanks and Regards
Reshma

Hi Reshma,
I think there is an error in the configuration. Could you give a bit more info? Which workflow are you using (standard or custom?). What system are you on ECC?
I also checked for the task you mentioned, but it is not available in ECC 5.0.
Also when you cross post in different forums mention this in your post.
Regards,
Martin

ESS - CLAIMS ERROR

Hi One & All,
Hope everyone is doing good.
I have one issue when creating Claims request from ESS through Portal.
When I click Create in Reimbursements / claims application, I have selected the Reimbursement type & Request type, then It is giving error message saying: " You Cannot create more than 0 requests in a SLTA: date YYYYMMDD. Creation cancelled.
Please help me how can I solve this?
Regards,
KSanj.

Hi,
Does it look like a standard error?
We have made an enhancement for achieving this as we did not find any solution for controlling the creation of open TI if it is more than 10 requests.
Not sure how much will this help. But please check here.
In WD Component : FITE_VC_GENERAL_DATA, Component Controller,
Method : ON_INIT, On the Pre Exit of this we have controlled this by checking table PTRV_PERIO.
Please check and let me know if you found useful.
Cheers,
Raj
Edited by: Rajagopalan Kannan on May 2, 2011 12:04 PM

Standard Workflow Tables for ESS Claims

Hi Experts,
We have configured the ESS / MSS Claims process in R/3, Portal and Workflow. Once I am applying claim in portal and approving the claim. I am running the standard program to update the infotypes. Now my query is, where these datas will be stored in the backend. When the user is required to view the datas how should they might check these datas except through infotype. I have checked the standard tables there is no data available.
Kindly reply me as soon as possible.... So that I have process it further
Regards,
Kannan
Edited by: Kanna83 on Dec 21, 2011 6:35 PM

Dear Siddharth,
Thanks for your valuable reply.
But in the table T77WWW_CLTRANSD we are not able to see any records getting stored.
How to view the records in the table T77WWW_CLTRANSD?
Can u let us knw that the table T7INCLM_ADV_TRNS ( Claims & Advance Transaction Table ) will get updated or not???
Is there any report to update the table T7INCLM_ADV_TRNS.
Please let us knw.
Thanks,
Nalla B.

ESS Claims Problem

Hi,
I am working on ESS / MSS Claims, the problem i am facing is
when the applicant calim for say 2400 where his eligibility is 2400
he is able to send the claim request to Appover & the request is reaching the approvers inbox,
but when the approver tries to approve the request it is giving the following error...
" Requested amount 24000 is greater than balance eligibilty amount 0.00 "
in appover level it is checking for the balance amount of applicant , which is not correct.
Can any one tell me why the system is checking the balance eligibilty amount of applicant at the approver level ?
Waiting for ur reply ...
Regards,
Srinath

Hi All,
I even checked the UWL XML content for Webflow connector.The particular Task ID for claims is registered there.CHeck the following .Do I have to add anything here?
<ItemType name="uwl.task.webflow.TS18900010.sap_R3%130" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="sap_R3%130" externalType="TS18900010" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ClaimAdvanceRequest_IN"/>
            <Property name="WebDynproDeployableObject" value="sap.com/essinclaims"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
Please help.

BADI'S & User-Exits for ESS Claims

Hi All,
Can anyone provide me the list of user-exits & BADI that gets triggered when claim is raised from ESS.
Example when user click's on apply button.
I want to do certain validation when employee raises the Claim from ESS.
Useful answer will be rewarded.

Solved by my own

Problem in processing the ESS Claims work item in UWL

Hi All,
After Employee raises the claim request ,work item is coming to Manager's UWL Inbox but the problem is it is not coming as a Hyperlink , it is not opening the approval window even if we click the item , it is not even coming as a hyperlink.
Please help.

Hi All,
I even checked the UWL XML content for Webflow connector.The particular Task ID for claims is registered there.CHeck the following .Do I have to add anything here?
<ItemType name="uwl.task.webflow.TS18900010.sap_R3%130" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="sap_R3%130" externalType="TS18900010" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ClaimAdvanceRequest_IN"/>
            <Property name="WebDynproDeployableObject" value="sap.com/essinclaims"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
Please help.

ESS Claims workflow ws18900023

Dear friends,
Need steps to trigger WS18900023.config part done.is there any standard class for it.standard task 18900010 added in swfvisu.
Thanks in advance.

Hi Sridhar
Kindly check whether the Workflow is maintained as a General task or not. to check that proceed the following steps
T-code: PFTC
now u need to click on the step to view the complete details
now we need to click on Attributes button & select General Task option and click on transfer button to complete the task. and to make them active we need to click on Generate button.
after Clicking on Generate make sure you activate the workflow
Hope this Info will be useful
Cheers
Pradyp

ESS -CLaims

Similar Messages

Maybe you are looking for