ESS connecting to two clients

We have one requirement:
We have one portal NW2004s with deployed ESS business package and currently it is connected to one client 100 of an ECC system.
Now the requirement is to connect ESS to another client 110 on the same ECC6.0 system and end user should be able to access both
Clients depending on the assigned role.
Let me know if it is possible.
Regards
Mani

Hi,
It is not possible... If you configure both clients ... you will get more problems ...
We got same situation for CRM & portal....
We are maintain different portal systems ....
Regards
Ben

Similar Messages

Connection between two clients

Hi,
I want to get some guidance on connection between two clients. Suppose I need to connect client 500 with client 900 in the same system without changing the logical names.
Thanks & Regards
Nabarun

Nabarun -
It almost sounds as if you just want an RFC to go from one client to the other. RFCs (SM59) are not client dependant so you can create one in any client. You can create one with the system name and point it to the client number using a specific user and password. I would recommend for security it be a communications user and not a dialog user depending on what you will be sending between the clients. However, the user will need the correct permissions and again, depending on what you are trying to accomplish, it may have to be a DIAG user although I would be wary. Then create a 2nd RFC pointing back to the other client. For example...
RFC 1
System Name = <System>
Client = 500
User = <userid in clnt 500>
RFC 2
System Name = <System>
Client = 900
User = <userid in clnt 900>
Then when you are in client 500, there is a path/connection to client 900 via that clients ID and password and vice versa using the appropriate RFC. Again, with out more info on what you are attempting, this may be your solution. Hope this helps. Good luck
Regards,
Zecher

Connecting multiple ECC Clients on same ECC system to BW system(s)

Hello.
We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
Thanks very much for whatever comments you might provide,
Geoff.

We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
No its not at all a bad practice

Two clients in XI system

Hi all,
Actually client 100 is created in Production .while installation in java engine its through some error, we are not able to continue the installation & we are not able to connect the jave engine with client 100.So that we created the new client 101 and we made the client copy again and started installation its completed succesfully.So there is any issue that of two client in production system & Can we will delete the 100 client in the production system is there is any issue.
pls help me in this ASAP.
Kind Regards,
Gopinath.

hi,
if you don't have any messages yet
delete it and start the installtion once more
it may help to prevent many problems <b>in the future</b>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Problem connecting only iFolder client

Hi everyone,
I begn with iFolder 3.8 and I've a problem with connecting the client.
For information, I've 3 separate iFolder servers, two of them work perfectly !
So, on one, I can't connect the Windows Client, I've an error "iFolder can't connect, please check the informations" (translation from french).
If I try to connect on the web access, it's OK, no problem with that.
The Simias.log file says that the connexion is successful with the client but it's not...
I try to reinstall the server several times with simias-server-setup, ifolder-admin-setup and ifolder-web-setup but no effects.
If someone as already experienced this and solved this problem, thank you for your help.

OK, so I've solved my problem after hours.
I tried to reinstall completly the server and then, it works !
To conclude, if your iFolder server doesn't work at the first time, don't try to debug, format and reinstall.

2 clients of 1 apo system connecting to 2 clients in same ECC system

Hi
We have a requirement at our end as below-
1)We have 2 clients in our APO Developement system and they are using BW functionality of APO
2)These 2 clients need to talk to 2 different client in our ECC System for ex:- APD has 2 clients(100 & 200) and ECC has two clients(101 and 201).
We need APD 100 to talk to ECC client 101 and APD client 200 talking to ECC client 201.
The query is - Is this possible to do the same .
If yes,can anyone guide me with some required documents

Hi sunny
One more query :-
The scenario is we want to connect 2 APO systems to 2 different clients of same ECC box
For Ex:-
ECC 100 ---> APD100
ECC 200 ---> APT200
There is only 1 ECC box with 2 clients.
I am not sure if we have some restrictions with regards to BW of APO connecting to 1 ECC box.
Do you have any idea if there are some issues while doing it as we will have 2 APO-BW client talking to 2 clients in ECC
Thanksbasisadmin

Gprs connection between two mobile phones

Hi
is it possible to make a gprs connection between two mobile phones without a server(pc...)? when the answer "yes" please give me an exapmle...

I'm not sure, I'm just connecting some facts. I'm talking about Siemens S55. It has implemented sockets (both client sockets and server sockets). The phone, when connected via GPRS has IP address (Siemens' netmonitor reports it..). But i've never tried to use server-socket on my mobile.
So it seems that it is in fact possible on some handsets. (AFAIK nokia 6610 and similar does not support sockets...)

Direct connection between 2 clients without any configuration!

I wan to make a system act like hamachi or logmein (websever & clients).
I have a webserver on the internet and two client from different networks connected to this webserver, now i want to make directly connection between these clients without any configuration on router. I think it is possible because all infomation about clients network could be got from http request which they send to server. But i don't know what exact fields in the header of http request that i need and how to set them to create connection between clients. I need some ideas about this issue.
Edited by: tulous on Nov 20, 2008 7:40 PM
Edited by: tulous on Nov 20, 2008 7:41 PM

tulous wrote:
I know, so if you want to use a remote control tool such as: VNC, remote desktop you must config on router or server. But even if you had a proxy(permit port 80) when you type www.sun.com you will get data from it, this data was sent from Sun to your proxy and in some way the data was return to your browser. So i think if we have enough information(it come from the webserver) we could init a connection between 2 client. An example of this is Hamachi.
At first 2 hamachi clients connect to a server of hamachi, when they have their id, a tunnel between 2 clients was established without any configuration on proxy(certainly that server did not deny port of hamachi). From now 2 clients can exchange data not through the server. The same in logmein, you can remote desktop any where with zero configuration, but the speed is guarantee because they contact to server for query information, but the data was transmited directly. Sorry if i make mistake.It doesn't work the way you think.
There is a proxy or you have to have one side listening with a ServerSocket and have ports opened as needed. You can't create a Socket connection on server A between clients B and C and then pass it off to clients B and C and magically they just talk to each other.
It does not work that way. It is impossible to do it that way.

[urgent]communication between two client.

currently i am developing an online game, i only own one computer at home,so i got a problem of how to make two client connected together?in case, there is a lot of clients here,now i wish that client1 do something, client2 will see it, how this can be done, how my server program tackle client1 and client2's IP address, so that client2 only communicate to client1 but not the other client? can please have any guidance on it. i really headache about this problem. please help. can i have some any simple example code to help me had better understanding on this problem? thanks a lot

well,you best don't let the client comunication each other
because the client open up some port and listening will got some problem
the custom solution is through the server , all client must be through the server to communicate
client1 <---> server <---> client2
if client1 connected to server ,and the server will take some
information ( client1's ip , username etc.) to the database.
client1 and server will keep connection
when the client1 is connected to server ,it will got the information about client1 , of course server also
take the information as client1's to the database,at this time,the client1 will get the client2's information
then,finished the client's information exchanged

RFC BETWEEN TWO CLIENTS IN DEVELOPMENT

hi everyone,
here connection is already exists in between two clients(development) now i have to transfer ztable from client 1 to client2.
if any body have the steps and code please guide me.
Best regards,
Sunil

Hi,
Log on to your destination client (where the form doesn't yet exist).
Transaction SE71, menu option Utilities -> Copy from Client.
Fill in the name of the form, the client number where it already exists, and the name of the copy (it can be the same of different to the existing form).
Execute.
This will prompt for a package for your new form, which can be different to the original.
Job done.
Regards,
Nick

Is it possible to connect to two different clusters?

Hi,
I was wondering if it was possible to connect to two different clusters from the same process?
What I would like to do is to able to get some cache on the first cluster and others on a second cluster. The cache-config DTD doesn't seem to forbid the definitions of several remote-cache-scheme. So I should be able to map all "c1-*" caches to the first cluster and all "c1-*" caches to a second cluster...
Is it possible?

Thanks,
Yes I'm connection via extend.
Could you give me an example of such configuration? I've made a test from a C++ client with the following client config:
====================================================================
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>c1-*</cache-name>
<scheme-name>extend-1</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>c2-*</cache-name>
<scheme-name>extend-2</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
<scheme-name>near-c1</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-1</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<near-scheme>
<scheme-name>near-c2</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-2</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<remote-cache-scheme>
<scheme-name>extend-dist</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001413</address>
<port system-property="tangosol.coherence.proxy.port">4321</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
<remote-cache-scheme>
<scheme-name>extend-paul</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001412</address>
<port system-property="tangosol.coherence.proxy.port">4131</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
========================================================================
if I do a CacheFactory::getCache("c1-Test"), the log shows a connection to the 1st cluster
if I then do a CacheFactory::getCache("c2-Test"), the log shows a connection to the 1st cluster and not to the second cluster
What did I do wrong?

11g Multiple Rpd on one BI server connecting to two different data marts

Hi
Did anyone tried and successfully implemented multiple rpds on one bi server. I have similar requirement in one of the clients place.
1. Install OBIEE 11g with vertical scaling( reason client doesnt want to spend extra money on additional server licenses) and would like to utilize the powerful existing servers.
2. Install 2 rpds on One BI Server and connect to two different datamarts.
3. Create two PS and provide two links to have two different reporting environments.
Appreciate with any pointers. I am very clear on Vertical Scaling and bumping up the Bi , PS and Java Hosts components. I saw a post with successful implementation of the same functionility in 10g and nothing in 11g. I already reviewed ritmanmeed blogs but did not give a complete picture of successfull implementation.
Thanks

Hi,
Yes, it is possible to have two different .rpds on one BI Server but then you need to set up two different Presentation Servers.
Refer the below threads for more information.
Re: multiples RPD in one server
Re: Multiple RPD & Multiple Presentation service instance on single BI Server
https://forums.oracle.com/forums/thread.jspa?messageID=9189677&#9189677
Can i put two rpd files in nqsconfig init file in BI Admin
Hope this help's
Thanks
satya

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

I just bought a new iMac and now I am trying to use it as a screen for my Macbook pro, but it don't have a Mini DisplayPort the new model only have Thunderbolt which my Macbook don't have. Is there any way to connect this two mac's anyway??

I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??

Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables.

ESS connecting to two clients

Similar Messages

Maybe you are looking for