ESS - don't use some componants

Hi,
I have installed ESS into the portal and the application works fine.
I can navigate into ESS application, create travel requests etc ...
But ESS application is too complete. I would like to hide some ESS componants (by example the "Employee Search" part).
Is there a way to do this without developping ? A portal configuration or a configuration into the Spro of R3 ?
Thanks in advance

Hi Siva,
Thank you for your reply.
I tried to do the manipulation you described, but I can't do it. Into the portal, In Content Administration, I opened the iView (named Overview) and the page (named Overview) that contains iView. I pressed the right button of the mouse with the control key, but nothing happens. Do I have well done all the steps ?
(I send you a screenshot of the overview IView.)
In fact, what I want to do (Into the overview iview) is to keep only the functionnalities "Working time" and "Travel and Expenses". I want to suppress all the other functionnalities (Employee Search, Benefits and Payment, Career and Job, Purchasing ...).
Is there a way to do this without developping ? I also looked at the IView properties, but I have not found any properties to use in this way.
Regards
Jean-Philippe

Similar Messages

Can i use some other company's locked iphone? or can i get official unlock from apple? cause i had iphone but it got water damage and don't want to pay crazy amount of money to get brand new...

can i use some other company's locked iphone? or can i get official unlock from apple? cause i had iphone but it got water damage and don't want to pay crazy amount of money to get brand new...
and i m getting locked phone from my family memeber for free. but he's with some other carrier. so can i get official unlock for that phone. please help me with this.
thank you

Only the original cellular provider can authorize unlocking. You will need to contact them to determine if they offer unlocking and if the phone qualifies.

HI my mac is low on memory and i want to erase some apps that i don't use in the iTunes media folder that i have already eraed from itunes

HI my mac is low on memory and i want to erase some apps that i don't use in the iTunes media folder that i have already eraed from itunes
how do i erase them without going one by one checking names???

There is no way to automatically select the unused apps. But, you can go go through your apps library and hold the command key as you select each app you want to delete to get them all at once.

HT5787 i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

It's not stolen ,that iphone came from canada to Egypt and me activeted it last night i got the acc from the owner
Thanks for Replay Mr

There is already a component with ID OAInternalInsertedFlexibleContentList. Please use some other ID.

We are trying to create a flexible content in OAF personalization but cannot save due to error.
There is already a component with ID OAInternalInsertedFlexibleContentList. Please use some other ID.
Personalization Flexible Content > Create item

Hello,
The ID cannot be same for any of the component in that Page. You might have another InternalFlexibleContent list in some other region. OA Framework will not accept it.
Use different id for it and it should work.
Yadnesh
(Hit like or Coreect if you feel so. It encourages user to participate)

Some component with an unsupported version is trying to use NI Spy

This problem is intermittent. In GPIB Configuration, Network settings, when I select the IP address of GPIB ENET/100, I get this NI Spy message: Some component with an unsupported version is trying to use NI Spy. Please contact National Instruments for an update. Do I need to update the firmware of GPIB/ENET100? The current version is B.9.

Hello,
Try uninstalling 488.2 driver, then uninstall MAX and then reinstall the 2.1 version for 488.2 from CurrentGPIB driver versions. Also make sure you are the administrator while you uninstall and reinstall.
I have not seen this problem happen before so I hope uninstalling and reinstalling helps solve this problem.
Please feel free to email me back incase you have further questions.
Good luck and have a great day!
Koninika
National Instruments

Connecting iPOD classic to TV using Apple Component cable

I have a 80g ipod classic and an apple component AV cable. I am trying to connect this to an TV with component video inputs. This TV is not an HDTV. I have attached the bl gr r cables in the correct position. I am getting a scrambled picture for NTSC and a split picture for PAL. based on my location I am sure that I should be using NTSC.
I brought my iPOD into a local apple store and he was able to plug it in to an HDTV there with no problem so I'm pretty sure that niether the ipod or the cable is defective.
My question is:
Is the ipod classic only compatible with an HDTV using the component cable? If so, will it work using the composite cable?

The dock is only good so you can use the remote. I don't know what the problem is with your Standard TV's with Component Inputs ... I've tried two different ones, also different brands, and they worked. I did make sure to change the iPod Video Settings to "TV Size = Standard". If it's set to Widescreen, that may account for the problem.
Otherwise, I'd suggest returning the Component cables and getting the Composite ones ... or just get the Composite ones as well. Personally, I think Apple totally screwed us all over by not just adding ONE dang Composite Video out cable to the AV Cables and allowing the Component Out to have a HD/Standard switch, much like most of the Game Console AV cables available. I don't know why they didn't do this, especially since we've got about 2 years before EVERYONE starts upgrading to HD. I guess they're just hoping to rake in some extra money by not making the Component AV Cable more capable.

Can i switch off my tc everyday when i don't use it? can this create troubleshot?

i want to switch off my time capsule every night (when i don't use my mac). Can this create troubleshot??

Opinions vary on this.
One camp reasons that if Apple designed the product to be switched off regularly, they would have included an "Off" switch on the device, or at least a means to turn it off from your computer. None of these options exist.
The same camp believes that it is better for an electronic component to be left on rather than powered off and powered back up constantly, which places more stress on the electronic components.
It's just like the engine in your car, they reason. It gets the most stress when it starts up. Reducing the stress prolongs the life of the device, but it uses more gasoline.
The other camp believes that it makes no difference whether you power up and power down on a regular basis, and they argue that this saves gasoline (electricity) as well.
But, this same group has trouble explaining why, if the device should be powered on and off regularly, that there is no "On" or "Off" switch on the device.
It is a fact that turning off the Time Capsule will force it to lose its connection to the network. Then, it has to re-establish that connection again when it powers up. Usually, it does but the chances of connection issues increase when you do this.
It is pretty clear what Apple wants you to do. But, it's up to you to decide what you want to do. If you also power down the modem every night, then you might try powering down the Time Capsule as well. This will save some electricity.
If you start to see that the Time Capsule is losing its network connection fairly often, then maybe you only turn off the Time Capsule when you will be away for longer periods of time.

How to play recorded videos using FLVPlayback component?

Hey Guys,
     I recorded videos using fms and i want to play them using FLVPlayback component. I've done some research but i cant find something
useful, I tried this code :
     flvplayback.source = "rtmp://localhost/appname/instancename/video";
     this code is not working. Am i doing it wrong or something? Can anyone please point me on the right direction!
    Thanks in advance!
Randy

You may like to use this tutorial for your purpose:
http://en.wikibooks.org/wiki/Beginner's_Guide_to_Adobe_Flash/Video/Using_The_FLVPlayback_C omponent
Here, in the content path you need to put your URL, also make sure that the instance name exist and provide the FLV extension in the url.
Hope that will help you.

Time Machine formatted itself on my external drive despite pressing "Don't Use"

I have an external hard drive that has been in use on/off for years. I even had backups on it (not using Time Machine). I mounted this hard drive, it was taking a while to mount. A prompt came up to ask if I wanted to use this drive as a time machine backup. I said "Don't Use". It hanged. Meanwhile, I opened disk utility twice. Both I had to force quit. After a while I relaunched finder.
Assuming it would cancel the time machine prompt. Only when did the finder eventually relaunch that the drive mounted to see that all my files where gone and looking in Thermal under ls -a to see their we're spotlight and time machine files along with some oddly named thing. About 1GB Is in use on the drive(I had much more that a gig on it). It is a TB drive
Here is the output from the ls -a on the volume
._.com.apple.timemachine.donotpresent
.com.apple.timemachine.donotpresent
.Spotlight-V100
.fseventsd
.Trashes
USBCˆö?␀.␀€␀
._.Trashes
Anyway would a tool like this (http://www.cgsecurity.org/wiki/TestDisk) help get back my files and format back to what I had previously? Or I am going in the wrong direction? What should I do?
Thanks. If you have any questions please reply below

Thank you Thomas,
I should have mentioned that the drive is formated as FAT32 and I ran verify disk on the drive and this error keep coming up until I stop the process :
"2013-02-16 12:06:23 +0000: / has entries after end of directory
2013-02-16 12:06:23 +0000: Truncate? no
2013-02-16 12:06:23 +0000: Extend? no"
Will the tools mentioned in you post work with FAT 32? I am looking at Data Rescue 3 becuase of the FileIQ functionality since I know I have obsure file formats on there
Does this help or it is irrelevant?

Opening of PDF using PAR component

Hello
I'm trying to display a pdf in the portal. The data for the pdf has to come from the backend. My question is as follows:
We've developed a ADOBE print form in R/3 and developed a FM which calls this form.
1. What should be the data type of the parameter that is returned to the portal after executing the FM. Should it be XSTRING or something else?
2. How do we open the pdf in portal.
There are certain posts from Detlev and Prakash Singh which speaks on this. But I could not figure it out. Can somebody please give a sample CODE for opening the pdf?
Note: I'm using PAR component for the display.
There is a mention of some weblog of Prakash :
Create an excel file from JAVA using HSSF api
But I'm unable to locate this weblog. Can anybody please help me out as I'm stuck.

Forgot to mention that I dont want to use iText api's.
Thanks
Aditya

HT204053 I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?

I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?

You can access, usually under the Apple (icon) menu in the main desktop
window, note item with name "About this Mac" & click on that, to see more
information about your computer, its OS X version, and other. The system
version and build model are there. Do not post a serial number.
If you are setting up Mail in a Mavericks OS X 10.9.x system, there often
is access to information in the Help viewer from the main menu bar, or
in an open mail application. If you have a Gmail or other account, that
info is often on their home page where setup and help are located.
The settings of each email account may vary according to their provider;
so you would have to change your computer to accept them. An older
link to a general look at that issue, change IMAP to POP, is covered here:
https://discussions.apple.com/message/16770816#16770816
While that may not answer your question, you could use the info in
your Mac OS X system Help viewer and use its search; or maybe
a Spotlight search to see an answer online.
You have to learn some basic things in order to actually use these...
and it helps to expand that so you won't have to pay for tech service
on things you can do yourself in a few minutes, beyond easy stuff.
Of course, you're hearing this from a guy with no ISP email, ever.
So mine are web-mail only; & I never save email to a computer.
PS: If you have a new Mac with an AppleCare plan, you may be able
contact Support for help. Ask someone (for 90 days, or up to 3 years
if the Plan was extended) there at AppleCare, for their guidance.
http://www.apple.com/support/contact/
Good luck & happy computing!
edited

Trying to get into the app store and it asks for my password. The problem is that it is showing an Apple ID I don't use ghosted in. I can't figure out how to use my correct ID.

Trying to get into the App Store to update some apss. It asks for my password but the problem is that it is showing ghosted an Apple ID I don't use. Can't figure out how to fix it.

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

I have the option to actualization of iMovie, but I can`t no change the Apple ID, the e-mail its appearing I don`t use anymore, how may I delete that e-mail address?

Dear People,
I have the option to do the actualization of iMovie for my MacBook pro, but I can`t no download that because the Apple ID don`t let me change the e-mail address, there is an e-mail address that I don`t use anymore since long time a go, when I'm log in with my Apple ID, and I try to download the actualization, the system request again to log in, with the old e-mail address, and have no option to change the e-mail address for the right one, some body may help me?

Take a look at this Apple doc -> Frequently asked questions about Apple ID
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See How to change your Apple ID password if you'd like more information.
If that doesn't work for you, contact Apple via Express Lane.

Using some GPS apps kills my cellphone provider's signal?

Hello Guys,
I bought a brand new iphone 4s 16gb and recently I have a problem that has turned very annoying. Let me give you a background story:
I downloaded "Waze" app and worked fine for over a week. After that it suddenly started to tell me that, it couldn't find my location and that the GPS was not working. When I looked up to the status of my provider's signal (top left corner) I realized that it was being reseted every 20 seconds or so, making me unable to have a solid connection with my provider. This meant that I was either unable to use internet or making phone calls. I call my service provider to check if the issue was on their part, but they told me my iphone was forcing a connection because the GPS signal was not found. I isolate the issue and realize that Waze is the one breaking my signal and making the gps go crazy. I even try using the MAPS app and it doesn't happen, if of course, I don't use Waze first. So my question is: "Is there a work around for this issue? or is some issue with GPS over IOS 5?"
Thanks in advance

Hey,
Thanks for the quick answer. I checked the option on my phone but it is off. I also have to mention that once I use Waze, and try to use Maps the behaviour continues. Nevertheless if I turn on Airplane mode, in order to kill the signals completly, and then turning it back to off it starts working again with Maps. I suspect its an icompatibility with Waze and Iphone 4s.

ESS - don't use some componants

Similar Messages

Maybe you are looking for