ESS - EIC employee intraction center in Personal Information Seetings

Hi Experts,
what are things need to be done from r3 side to active on ESS EIC (employee intraction center) in personal information.
i have gone thru help.sap. i didnt find any seeting from r3 what to be done.
can anybody help me on this issue.
thanks,
regards
Vijai

Hi Experts,
anyhelp

Similar Messages

  • EIC Employee Interaction Center Implementation

    Hello
    We want to implement EIC. However, I do not have any resource to start with. It is the first time I have come across EIC.
    The EIC component is installed with ECC 6.0. We currently do not have Solution Manager.
    Can someone assist on how and where a newbee should start for EIC implementation?
    Regards
    Yash

    5) I believe this is your first EIC implementation Paul. Was there any source of EIC Knowledge for Implementation apart from the help documentation? Could you suggest any online resources or books that have helped you or would help me ? Any cookbooks ?
    This question was for Paul so I will let him respond but there are multiple cookbooks as I have been involved in ramp up projects for EHP1, EHP2 and EHP4 (all of which have new EIC functionality) but they are copyrighted and property of SAP and it is my understanding that they cannot be shared. Enclosed are some blogs that I have written that "hopefully" contain some help for a new implementation.
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/16245
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/15923
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/15210
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/14882
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/14555
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/14554
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0063786550DB10417459621364924182End?blog=/pub/wlg/13538
    6) What kind of basis support is needed for setting up EIC ?
    Basis support is needed in a part time role for an EIC project to set up environments, copy baseline config from client 000, activate services, apply OSS notes, web dispatcher, RFC destination configuration, enhancement packages, implement business packages, portal definition etc. Sorry about the formatting....not sure it is showing up this way.

  • EIC-- Employee Interaction Cente-- UNCAUGHT_EXCEPTION

    We have installed EIC, on SAP EIC 6.O
    When we execute the EIC, by transaction "HREIC" we have a runtime error on the abap system transaction "ST22":
    The web client is shown good in the internet explorer but we have the runtime error
    The exception 'CX_SFW_SWITCH_EXISTENCE' was raised, but it was not caught
    anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_WEBCUIF_SWITCH=============CP' has to be
    terminated.
    Do you have any idea?

    Thanks Manuel
    In my test landscape everything works fine, and i don´t have this problem. I have it on production
    I checked that both tables have the same entries in my test landscape and my production landscape.
    Do you have any other idea to check, please?
    Thanks for your help!

  • Process to restrict an employee to change personal information in ESS

    Hi,
    As per the requirement, in ESS, Personal information should be in Display mode but here employee can change his personal information like Bank details [IT0009], Family details [IT0022], Address [IT0006] etc.
    So please guide to restrict an employee to change personal information in ESS.
    Thanks,
    Abay

    Hi,
    Thanks for the update.
    Do you have any document on the same?
    Thanks,
    Abay

  • Personal Information produces a Portal Runtime Error

    When we access the portal and click on Employee Self-Service > Overview >  Personal Information > Display Personnel File
    It displays a Portal runtime error - Exception ID: 05:0#_29/9/10_0080_3746050
    Please advice.

    hi,
    search in the portal log for an error "29/9/10_0080_3746050" by using e.g the log viewer oder portalurl:port/nwa
    Please post the Error text here.
    Regards,
    Kai

  • Issue in ESS Personal Information iViews

    Dear Experts,
    I have an issue with ESS Personal Information details. The issue is the personal information related iViews such as Bank information , personal id, address iViews are only displays a road map and a button in disabled mode. Its doesn't display any data.
    But my Employee search iViews are working fine.;
    Any idea about this issue?
    Thanks,
    Ram

    Im getting exactly like below in Bank information iView
    [1] -
    [2]--[3][4]--
    Overview Edit Review and Save Confirmation
    <Previous Step> <Exit>.
    Please help me out!
    Ram

  • ESS Personal Information not working

    Dear All,
    Here we have ECC 6 and EP7 SP10, we have uploaded BP ESS 1.0 SP 7.
    For ESS Personal Information workset, iViews for Address, Bank Information, Family Information and Personal Data is showing a page in which it is given steps which are
    1     Overview   2 Edit   3 Review and Save   4 Confirmation
    Previous Step      Exit
    And also in SPRO setting for Personal information under ESS head is missing
    Employee Self-Service-->Service-Specific Settings --> Personal Data , there is no personal Data link.
    Kindly help me what needs to be done for Displaying iViews of Personal information and getting the link for Personal Data in SPRO under Employee Self Service.
    Regards,
    Sidhartha Chatterjee

    Dear Awadh,
    I am able to see Own Data in SPRO.
    Issue is that while running Personal Information --> Address iView, the page which is being shown is like this
    [1] -
    [2]--[3][4]--
    Overview           Edit         Review and Save      Confirmation
    <Previous Step>   <Exit>.
    and no data is being Displayed.
    The same is the case for other iViews of Personal Information like Bank Details and Family Details.
    But for Personal Data iView it is giving this error
    "<b>failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'"</b>.
    kindly tell me what needs to be done to resolve this issue.
    Regards,
    Sidhartha Chatterjee

  • ESS - Personal Information

    Hi All,
    In ESS, when an employee sees his personal information from infotype 2 such as Name, DOB, SSN. Is there a way in which some fields can be hidden. for example, we would like SSN not to be displayed whereas other fields, name and DOB -want to be displayed?
    Thanks,
    Mark.

    Have you checked this <a href="https://forums.sdn.sap.com/click.jspa?searchID=2887786&messageID=2868949">Thread</a> ?
    ~Suresh

  • ESS Personal Information Services

    Hi,
    We are in planning to upgrade our existing ITS version to the latest webdynpro version ESS services. We will be implementing for 13 different countries. I can see based on the delivered Business Package that the iviews are based on specific countries (at lest for personal information). Due to this, i assume that i'll have to create 13 different roles (based on countries) and assign accordingly to the users (either this or use groups). Can someone confirm this? By the way, how is the checking being done against the user? Thanks
    Regards

    Hi Nahoj,
    The country-specific apps works with the country grouping information from SAP User. To assign the country grouping, set the MOL parameter in the ABAP User.
    In the customizing side you disguise this information through 2 entries:
    - All services:
    Employee Self-Service > General Settings > Homepage for Self-Services > Services > Define Services
    - Country-specific services:
    Employee Self-Service > General Settings > Homepage for Self-Services > Services > Define Country-Specific Services
    You can maintain/remove services inside your countries of application, but if still that not cover your requirements, you can add a country-specific app service from another country (check this link: [Reuse Country-Specific Applications|http://help.sap.com/erp2005_ehp_04/helpdata/EN/6d/5e207f3bb547aebdd1399aaa3d23d7/content.htm]).
    When a User enter to Portal, after read Portal's Role, it reads the country grouping and display the services enabled from All Services + services enabled from Country-specific services for the corresponding User's country grouping.
    Regards!

  • ESS:  International Personal Information Iviews (ignore Molga)

    All -
    Interesting situation at my current client.  We're doing an upgrade to ERP 2005 from 4.6C.  In the client's initial implementation (global implementation I might add), the Implementation partner set up with the system with all employees in Country code 10.  They designate the country at the personnel subarea level (if you're scratching your head in confusion then join the club...lol).  They implemented ESS a few years ago and did a repair to the function module which fetches the users HR data to point to an alternate table that has the personal subareas, this of course worked for the old version because design time was done in R/3 for that specific ESS service.  Fast forward to today and design/runtime happens on the frontend and of course there are country specific iviews for personal information scenarios.  There isn't time unfortunately within the upgrade project to fix the MOLGA mess so we're trying to find a solution within the webdynpro to have it ignore molga.  Any suggestions?

    Hi Nakul,
    1) For the various countries for which SAP provides the iViews for Address, either we have to have multiple iViews for different countries, or identify one country and link its resource to other countries. (in which case all employees regardless of where they come from, would see the same screen.
    That's right! In SAP Help you have the complete list:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1c/ae6b40dde0980ae10000000a155106/content.htm
    a little tip: i think as a workaround to avoid lose country functionality you can hide non-mandatory fields and rename labels through iview Personalization (Ctrl + Right Click in Preview mode), in order to match screen of different countries
    2) For countries that do not have SAP iViews, we again identify the closes country screen and configure it in Country Specific Settings.
    Which again means, my current setting (1 Portal {Role Definition}, 1 Workset, 1 Page 1 iView) for Address for all employees and still show country specific screens by resolving molga wont work anymore?
    Portal always works with MOL/UGR parameters by using std services/resources/iviews, etc.
    As an alternative, you can build a custom services/resources/iviews and then avoid this call (i'm talking about relate a one particular iview with a new resource, and this with a new service).
    But i suggest maintain a simmilar behaviour to std, thinking of future upgrades and to get the advantages of functionality already built...
    All the best

  • Family Details in ESS personal information

    Hi gurus,
    how to edit the family details in ESS personal information .
    when i click on family details link it is showing me spouse , child details
    beside child and spouse details there is a edit button, when i click on edit button it is showing the information in display mode,
    i want to change this to edit mode so than employee can change and save his family data.
    Note:- i have searched SDN , what i found is ,how to hide that edit button
    throw some light on this.
    Regards
    K Naveen Kishore.

    Hi Navin,
    Looks like some one has made fields readonly.
    1. It can be done via personalization
    2. It can be done from NWDS
    Do the personalization and make the fields required fields editable.
    See tish help link on how to do personalization.
    http://help.sap.com/saphelp_nw70/helpdata/en/42/ed3ce7f8593eebe10000000a1553f7/content.htm
    Make sure ur user id has the Content Admin role and the valid pernr attached.
    Regards
    Yugandhar Reddy

  • Message Handling for Personal Information application on ESS Portal

    Dear Experts,
    JAVA webdynpro applications are attached on portal for Personal Information, Whenever employee changes his personal Information like personal details, address , Family details after pressing 'SAVE' button I want to display custom message.
    I have gone through this post Personal data changes in ESS portal 
    1) Class CL_HRESS_PER_DETAIL is not triggering.
    2) BADI  HRPAD00INFTYBL is triggering on 'REVIEW' button only & it is only showing error message , I want to show successful message.
    3) BADI  HRPAD00INFTYDB  is triggering on 'SAVE' button but method  IF_EX_HRPAD00INFTYDB~UPDATE_DB don't have any message handling parameter.
        I tried with class cl_hrpa_message_list  in UPDATE_DB  method   its not showing any message.
    Please Help.
    Thanks & Regards,
    Bhushan

    Hi Yugandhar,
    If possible I want to change message as shown in screen shot, If it is not possible to change it I have to show additional success message "The Changes you made were sent for HR approval".
    Thanks & Regards,
    Bhushan

  • Ess personal information workflow

    Hi
    We have requirement that when ever a employess edits his/her personal informations in ESS, a workflow should route the changed information to a reviewer to approve the changes. Once it is approved, informations should be moved to backend system.
    Can someone tell me how to achieve it?
    Thanks
    Nash

    I think you have to identify whether any event is triggered when you are changing the Employee Information.
    Check with SWEL Tcode.
    Thanks
    Arghadip

  • Can't see the ESS Additional Personal Data link within Personal Information

    Hi All,
    For some reasons, I can not see the Additional Personal Data link within the ESS Personal Information iView. I have checked the Homepage framework and the existence of the iView in the PCD and everything appears to be fine.
    Do I need to assign any additional infotype to my id or give myself specific authorisations to see this link?
    I would really appreciate if you could provide an answer to my query.
    Thanks,
    Vibhu

    Hi,
    I think mostly you have maintained the data in PA30 Transaction and had data in Info type 0105.
    After this try to check with your EA-HR patch and SAP HR patch in the services. If  both are not maintained at the same patch levels such type of problems will occur.
    Regards,
    kishore.

  • RFC Call Error - from Portal End - For ESS Personal Information service

    Hi,
    I am getting "Syntax error in program SAPLHRXSS_PER_MAC                       ., error key: RFC_ERROR_SYSTEM_FAILURE  " error Message on the portal (ESS--->Personal Information Screen).
    When I did RFC trace analysis (using ST 22) this is what i get.
    Can you let me know what could be the issue.
    We are running HR Backend(Support Pack 15,ecc 5.0).
    Portal (EP 6.0 SP19, ESS 100 (SP 10)).
    Could you please let me know what could be the issue ?
    Syntax error in program "SAPLHRXSS_PER_MAC ".
         What happened?
              Error in ABAP application program.
              The current ABAP program "SAPMSSY1" had to be terminated because one of the
              statements could not be executed.
              This is probably due to an error in the ABAP program.
              In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
              in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
              "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
              Author and last person to change the Include are:
              Author "SAP "
              Last changed by "C5069405 "
         What can you do?
              Please eliminate the error by performing a syntax check
              (or an extended program check) on the program "SAPLHRXSS_PER_MAC ".
              You can also perform the syntax check from the ABAP/4 Editor.
              If the problem persists, proceed as follows:
              Print out the error message (using the "Print" function)
              and make a note of the actions and input that caused the
              error.
              To resolve the problem, contact your SAP system administrator.
              You can use transaction ST22 (ABAP Dump Analysis) to view and administer
               termination messages, especially those beyond their normal deletion
              date.
              is especially useful if you want to keep a particular message.
         Error analysis
              In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred:
              "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
         How to correct the error
              Probably the only way to eliminate the error is to correct the program.
              If you cannot solve the problem yourself and you wish to send
              an error message to SAP, include the following documents:
              1. A printout of the problem description (short dump)
                 To obtain this, select in the current display "System->List->
                 Save->Local File (unconverted)".
              2. A suitable printout of the system log
                 To obtain this, call the system log through transaction SM21.
                 Limit the time interval to 10 minutes before and 5 minutes
                 after the short dump. In the display, then select the function
                 "System->List->Save->Local File (unconverted)".
              3. If the programs are your own programs or modified SAP programs,
                 supply the source code.
                 To do this, select the Editor function "Further Utilities->
                 Upload/Download->Download".
              4. Details regarding the conditions under which the error occurred
                 or which actions and input led to the error.
         System environment
              SAP Release.............. "640"
              Application server....... "srv006"
              Network address.......... "167.116.230.56"
              Operating system......... "HP-UX"
              Release.................. "B.11.11"
              Hardware type............ "9000/800"
              Character length......... 8 Bits
              Pointer length........... 64 Bits
              Work process number...... 1
              Short dump setting....... "full"
              Database server.......... "srv006"
              Database type............ "ORACLE"
              Database name............ "H81"
              Database owner........... "SAPR3"
              Character set............ "en_US.iso88591"
              SAP kernel............... "640"
              Created on............... "May 21 2006 20:29:01"
              Created in............... "HP-UX B.11.00 A 9000/800"
              Database version......... "OCI_920 "
              Patch level.............. "129"
              Patch text............... " "
              Supported environment....
              Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
               10.2.0.."
              SAP database version..... "640"
              Operating system......... "HP-UX B.11"
              Memory usage.............
              Roll..................... 16128
              EM....................... 4189928
              Heap..................... 0
              Page..................... 0
              MM Used.................. 629192
              MM Free.................. 3558216
              SAP Release.............. "640"
         User and Transaction
         Information on where terminated
              The termination occurred in the ABAP program "SAPMSSY1" in
               "REMOTE_FUNCTION_CALL".
              The main program was "SAPMSSY1 ".
              The termination occurred in line 68 of the source code of the (Include)
               program "SAPMSSY1"
              of the source code of program "SAPMSSY1" (when calling the editor 680).
         Source Code Extract
         Line     SourceCde
            38     
            39     module %_rfcdia_call output.
            40         "Do not display screen !
            41         call 'DY_INVISIBLE_SCREEN'.
            42         perform remote_function_diacall.
            43     endmodule.
            44     
            45     module %_cpic_start.
            46       if sy-xprog(4) = '%RFC'.
            47         perform remote_function_call using rfctype_external_cpic.
            48       else.
            49         call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
            50         perform cpic_call using convid.
            51       endif.
            52     endmodule.
            53     
            54     
            55     form cpic_call using convid type c.
            56       communication send id convid buffer header.
            57       if sy-subrc eq 0.
            58         perform (sy-xform) in program (sy-xprog).
            59       else.
            60         message a800.
            61       endif.
            62     endform.
            63     
            64     form remote_function_call using value(type).
            65       do.
            66     *   test if sy-xprog and sy-xform are set
            67     *   sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
         >>>>>         call 'RfcImport' id 'Type' field type.
            69         perform (sy-xform) in program (sy-xprog).
            70         rsyn >scont sysc 00011111 0.
            71       enddo.
            72     endform.
            73     
            74     form remote_function_diastart.
            75       do.
            76         call 'RfcImport' id 'Type' field rfctype_rfcdia.
            77         perform (sy-xform) in program (sy-xprog).
            78         "Parking position for next request
            79         rsyn >scont sysc 00011111 10.
            80         "ALternativ : Free mode
            81         "COMMIT WORK.
            82         "SYSTEM-CALL FREE MODE 0.
            83       enddo.
            84     endform.
            85     
            86     form remote_function_diacall.
            87         sy-xcode = '%_@no@'.
         Contents of system fields
         Name     Val.
         SY-SUBRC     0
         SY-INDEX     2
         SY-TABIX     0
         SY-DBCNT     0
         SY-FDPOS     0
         SY-LSIND     0
         SY-PAGNO     0
         SY-LINNO     1
         SY-COLNO     1
         SY-PFKEY     
         SY-UCOMM     
         SY-TITLE     CPIC and RFC Control
         SY-MSGTY     
         SY-MSGID     
         SY-MSGNO     000
         SY-MSGV1     
         SY-MSGV2     
         SY-MSGV3     
         SY-MSGV4     
         Active Calls/Events
         No.   Ty.          Program                             Include                             Line
               Name
             2 FORM         SAPMSSY1                            SAPMSSY1                               68
               REMOTE_FUNCTION_CALL
             1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
               %_RFC_START
         Chosen variables
         Name
             Val.
         No.          2     Ty.      FORM
         Name      REMOTE_FUNCTION_CALL
         %_DUMMY$$
                 2222
                 0000
         SY-REPID
              SAPMSSY1
                 5454555322222222222222222222222222222222
                 310D339100000000000000000000000000000000
         SYST-REPID
              SAPMSSY1
                 5454555322222222222222222222222222222222
                 310D339100000000000000000000000000000000
         %_ARCHIVE
                 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
         TYPE
              3
                 0000
                 0003
         SY-XPROG
              SAPLSYST
                 5454555522222222222222222222222222222222
                 310C393400000000000000000000000000000000
         SY-XFORM
              HRXSS_PER_CLEANUP
                 455555545544444552222222222222
                 82833F052F3C51E500000000000000
         %_SPACE
                 2
                 0
         No.          1     Ty.      MODULE (PBO)
         Name      %_RFC_START
         %_PRINT
                  000                                                                                0 ##
                 2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
         RFCTYPE_INTERNAL
              3
                 0000
                 0003
         Internal notes
              The termination occurred in the function "ab_genprog" of the SAP
              Basis System, specifically in line 1374 of the module
               "//bas/640_REL/src/krn/runt/abgen.c#10".
              The internal operation just processed is "CALY".
              The internal session was started at 20070502223335.
              Program name.........: "SAPLHRXSS_PER_MAC ".
              Error message........: "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown.".
         Active Calls in SAP Kernel
         Lines of C Stack in Kernel (Structure Differs on Each Platform)
         ( 0)  0x40000000016d6a8c   CTrcStack2 + 0x2bc  [dw.sapH81_DVEBMGS33]
         ( 1)  0x40000000016d67c0   CTrcStack + 0x18  [dw.sapH81_DVEBMGS33]
         ( 2)  0x4000000001d41438   rabax_CStackSave__Fv + 0x100  [dw.sapH81_DVEBMGS33]
         ( 3)  0x4000000001d4dbf8   ab_rabax + 0x1f68  [dw.sapH81_DVEBMGS33]
         ( 4)  0x40000000018cc09c   ab_genprog__FPcPvUii + 0xdbc  [dw.sapH81_DVEBMGS33]
         ( 5)  0x4000000000d3b4cc   newload__FPcP13TmpSubpoolDirUi + 0x29c  [dw.sapH81_DVEBMGS33]
         ( 6)  0x40000000016a7324   ab_LoadProg__FPcUi + 0xec  [dw.sapH81_DVEBMGS33]
         ( 7)  0x40000000016831fc   ab_link + 0x334  [dw.sapH81_DVEBMGS33]
         ( 8)  0x40000000015694d4   ab_rfcimport + 0xccc  [dw.sapH81_DVEBMGS33]
         ( 9)  0x40000000018cff98   ab_jcaly__Fv + 0x598  [dw.sapH81_DVEBMGS33]
         (10)  0x4000000000f98df8   ab_extri__Fv + 0x17a0  [dw.sapH81_DVEBMGS33]
         (11)  0x40000000016ab2d8   ab_xevent__FPCc + 0x38  [dw.sapH81_DVEBMGS33]
         (12)  0x400000000189c9a8   ab_dstep + 0x120  [dw.sapH81_DVEBMGS33]
         (13)  0x4000000000ed4c00   dynpmcal + 0xd0  [dw.sapH81_DVEBMGS33]
         (14)  0x4000000000ed1554   dynppbo0 + 0x1e4  [dw.sapH81_DVEBMGS33]
         (15)  0x4000000000ed0af4   dynprctl + 0x43c  [dw.sapH81_DVEBMGS33]
         (16)  0x4000000000ecb7a0   dynpen00 + 0x2118  [dw.sapH81_DVEBMGS33]
         (17)  0x4000000000fa598c   Thdynpen00 + 0x6a4  [dw.sapH81_DVEBMGS33]
         (18)  0x4000000000fa49b8   TskhLoop + 0x50d8  [dw.sapH81_DVEBMGS33]
         (19)  0x4000000000f999f8   tskhstart + 0x1e0  [dw.sapH81_DVEBMGS33]
         (20)  0x4000000000d42194   DpMain + 0x484  [dw.sapH81_DVEBMGS33]
         (21)  0x400000000220d41c   nlsui_main + 0x14  [dw.sapH81_DVEBMGS33]
         (22)  0x4000000000992794   main + 0x14  [dw.sapH81_DVEBMGS33]
         (23)  0xc000000000020ab0   $START$ + 0xa0  [/usr/lib/pa20_64/dld.sl]
         List of ABAP programs affected
         Index     Ty.     Program     Group     Date     Time     Size     Lang.
              0     Prg     SAPMSSY1          0     06.11.2003     20:53:07         18432     E
              1     Prg     SAPLSYST          1     10.05.2006     09:57:38         30720     E
              2     Typ     SYST          0     04.12.2000     14:54:51         27648     
         Directory of Application Tables
         Name                                     Date       Time       Lngth
             Val.
         Program      SAPMSSY1
         SYST            .  .            :  :          00002404
         ABAP Control Blocks (CONT)
         Index     Name     Fl     PAR0     PAR1     PAR2     PAR3     PAR4     PAR5     PAR6     SourceCde
           118     CLEA     00     0035                                   SAPMSSY1
           119     CLEA     00     0036                                   SAPMSSY1
           120     CLEA     00     0037                                   SAPMSSY1
           121     MESS     00     001C                                   SAPMSSY1
           122     ENDF     00     0000                                   SAPMSSY1
           123     -
         00     0000                                   SAPMSSY1
           124     PERP     00     0001                                   SAPMSSY1
           125     PERP     02     0000                                   SAPMSSY1
           126     WHIL     00     0002     0000     0000     0000     0000     0000     0000     SAPMSSY1
           130     WHIL     00     0003     0000     0000     0000     0000     0000     0000     SAPMSSY1
           134     BRAN     05     000E                                   SAPMSSY1
           135     CALY     00     0003     0038     002A     0005     002B     0000     0000     SAPMSSY1
         >>>>>     CALY     02     0000     0039     8000     0000     0000     0000     0000     SAPMSSY1
           143     xper     02     0000     0010     0011                         SAPMSSY1
           145     PERP     80     0000                                   SAPMSSY1
           146     SYSC     1F     0000                                   SAPMSSY1
           147     BRAX     00     FFEF                                   SAPMSSY1
           148     WHIL     00     0004     0000     0000     0000     0000     0000     0000     SAPMSSY1
           152     ENDF     00     0000                                   SAPMSSY1
           153     -
         00     0000                                   SAPMSSY1

    Hi,
    The error is occuring in the program file SAPLHRXSS_PER_MAC.
    In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred 
    in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:      
    "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."    
    Information on where terminated                                              
        The termination occurred in the ABAP program "SAPMSSY1" in               
         "REMOTE_FUNCTION_CALL".                                                 
        The main program was "SAPMSSY1 ".
    This place  where it has terminated is highlighted in bold letters.                                       
    form remote_function_call using value(type).   
      do.                                          
      test if sy-xprog and sy-xform are set      
      sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
    <b>    call 'RfcImport' id 'Type' field type.     </b>
        perform (sy-xform) in program (sy-xprog).  
        rsyn >scont sysc 00011111 0.               
      enddo.                                       
    endform.                                       
    Thanks,
    Manoj

Maybe you are looking for