ESS: empty screen

Hello,
I'm just implementing ESS on an EP6 / ECC 6 (both on the highest av. service pack)
If I start ESS in the portal I see the homepage framework properly but if I click an an application group f.e. time management I get only empty screens.
Can anybody help please?
Thanks
Eric
P.S.:
I have imported the necessary packages ESS and XSS and deployed (they are shown in in the Content Manager).
I have configured the JCos and tested them successfully.
In the HR System I have an user with unlimited rights and an attached personal id.
I use the Homepage Framework from client 000

Hi Eric
As I understand
1. You can view the home page tab (overview) where there are links to areas like time management, personal data etc.
2. when you select time management you view blank page.
if above is correct then
1. check the if there are services and resources attached properly in the home page frame work.
2. What is the ERP(R3) authorization given to the user with which you are using to access ESS.
We had a similar issue which was due to ERP authorization. Please ask your security consultant to activate and attach SAP_ESSUSER_ERP05 role to your user.
PLEASE MAKE SURE YOU GENERATE THE ROLE BEFORE ACTIVATING.
We have been able to resolve such issues before. Do reply.
regards
Barin
Edited by: Barin Desai on Apr 15, 2009 1:04 PM

Similar Messages

  • Empty Screen after logging into portal

    Hi,
    I have installed SAPNetweaver 2004S,  SP9 trial edition.
    After logging into portal , Masthead and Tool area are visible and reamining part is empty screen . Toplevel navigation , detailed navigation, desktop innerpage are not getting displayed.
    Can somebody please help me in resolving this.
    Regards
    Venkata Chithirala
    Message was edited by:
            Venkata Chithirala

    Hi
    The portal display creates problem when you try to access the portal using the IPADDRESS instead of the host name for the portal.
    What you can do is make a entry in the hosts file for the portal server and then try to access the portal using the name given in the hosts file.
    http://servername:<port>/irj
    servername is the entry which you have given in the hosts file.
    Dont use the IPAddress while accessing the portal, if by chance you are using it.
    This shoud solve your problem.
    Regards
      Sumit Jain
    **Reward with points if useful.

  • Custom Validation in ESS Edit Screen

    All,
    We have a requirement in ESS Address screens that all country users should key in only English Data. We are in SAP ESS SP12 and all the Address Components are in WD Java. The validation on all the address screen fields for this requiement has to be handled and give an error message back to the user.
    The Options that I Checked out were:
    1) Handling the Validation through BADI HRPAD00INFTYUI or HRPAD00INFTYBL.
    2) Handling the validation in WD Java layer inside the country spoecific components isConsistent method of the Detail View Component controller
    Which is the best place (ABAP or JAVA) to handle Custom validations on the Edit Screen and give back message to the user? Please suggest if any other better options are available other than the above mentioned ones.
    Regards,
    Nagarajan.

    Hi,
    Both are doable if you are good in java and have NWDI ,handling validations in the wd java layer is easy. If you are good in ABAP you can handle in ABAP.It depends on how you write your code, if you do validations in java and if your validation fails you can show errors to user right away which will reduce your call to backend at isconsitent method for checking the errors.
    Thanks,
    pkv

  • When I open iTunes on my iphone5 it shows only empty screen he cb I fix the issue..help

    When I open iTunes on my iphone5 it shows only empty screen he cb I fix the issue..help

    The screen is completely blank in the app ? Have you tried closing the app via the phone's taskbar and/or done a soft-reset to see if it then displays anything ?
    Closing an app : Force an app to close in iOS - Apple Support
    Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • Adding an ABAP Webdynpro app to the ESS overview screen

    I am trying to add an ABAP webdynpro page to the ESS overview screen, I have managed to add URLs without a problem and have found a tutorial to add Java Webdynpro pages however this does seem to apply to ABAP webdynpro.
    Thanks
    J

    Julian,
    what problem are you facing in adding.
    you can create an iview for the WDA application and in the HomePage Framework you can create resources and services which will point to that iview and add that service to the ESS Overview.
    Thanks
    Bala Duvvuri

  • How can we get Empty screen as a output list

    Hi Experts,
      when executing the program I want to display an empty screen (as a output list) instead of error message . How we can do? let me know.
    Thanks in advance.
    Silviya T

    Hi Thomas,
    Is u have such a requirement either u can use a sucess message i.e. type s with no text.
    REPORT ZSAC_TEST1 message-id 00.
    message s000.
    Or try using this
    write:/ 120 '.' .
    the o/p screen looks like blank.
    Hope this helps U.
    Regards
    Sachin Dhingra

  • Need inputs form experts on ESS Overview Screen

    Hi all,
    1) I need to add customized pictures on the ESS Overview screen i.e., New Pictures to be displayed for each services
    (How should i add Customized pictures in "Picture Resource:...
    in Area Page)
    eg: Against  Employee Search customized ICON to be dislaye
    presently it takes   "EMPLOYEE_SEARCH_PIC"
    2) Also there are few links when i am clicking on those it opens in the New Window. Can anyone pls suggest how to restric this?
    Regards
    Vijay
    Edited by: Vijay Mohan on May 29, 2008 12:39 PM

    (1) Best way....store your pics somewhere (like KM for instance which is quick and easy). Config your own Homepage Framework server (to point to the location of pics), then create a resource in config for each pic (giving you server id you configed and any other path info), then assign YOUR resource as the pic to use for the area. This is similar to storing pages as detailed here:
    Using KM documents for XSS Area Page text
    (2) This can be either (a)the resource has been defined with a window parameter of "_blank" which means "open in a new window" or (b) as the above user said, controlled on the iView of the service (which is rare but is possible).
    Hope this helps, Vijay!

  • MSS Status overview displays empty screen

    Hi
    We are configring the MSS PCR under the Team workset.
    Under PCR when the option for Status Overview for Personnel Change Requests  are clicked, I get an empty screen.
    Is there any additional configurations required?
    We are using EP7.0, ECC6.0 (nw2004s)
    Thanks for your help
    Regards
    Madhu

    Hi Ulrike,
    I replicated exactly the steps your described but do not see the same system behaviour. On my system, just after creating the cart, in the section 'Approval status details for selected item', the status is 'No user decision'.
    I searched notes and messages and found nothing related to this issue.
    Can you send me screenshots showing exactly the steps you followed just to make sure I am following same steps in the replication.
    Cheers,
    Siobhan

  • I have a new hp tower running windows 8.1 and have been trying to install the adobe reader.  The installer downloads (1meg) and I choose to run it but it just sits with an empty screen.  I've checked task manager and it takes up memory but does nothing.

    I have a new hp tower running windows 8.1 and have been trying to install the adobe reader.  The installer downloads (1meg) and I choose to run it but it just sits with an empty screen.  I've checked task manager and it takes up memory but does nothing.  After letting it run for 3-4 minutes I kill the task.  What can I do to get the reader installed on this machine?  I've tried using chrome, firefox and explorer and get the same results with each.

    Try the offline installer from http://get.adobe.com/reader/enterprise/

  • In iMovie when I move my curser through pictures in the project, I have an empty screen or it shows the first picture only..what might be the problem?

    In iMovie when I move my cursor through pictures in the project, I have an empty screen or it shows the first picture only..what might be the problem?

    Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097

  • Empty screen at starting webclient

    hi *,
    we're getting an empty screen, when starting the crm2007 webclient. by empty i mean that the skin is loaded, i can recognize the L-structure, the back-button is also visible and at the position where in standard skin normally used to appear a picture there is only written 'Hello, I am empty      Hello, I am empty'... but there ain't no navigation bar or functional links...
    any suggestions?
    regards, tom

    Ho Thomas,
    Could you please try the following:
    a) On SAP standard menu -> right click on 'Favorites' folder -> select 'Add Other Objects' -> select 'BSP Application' from pop-up -> enter BSP Application = CRM_UI_FRAME, Description = Log-on Page and Start Page = default.htm -> save
    b) Double-click on Log-on Page (favorites folder) -> enter USER = CRM USER (example: CRMUSER01), enter Password = xxxxx ->
    should display your business role specific new CRM WEB UI
    Please note that you have to try 5/6 times - if you are activating CRM WEB UI for the first time due to the default time out session. You can  monitor the process in SM50...
    Once again, I strongly suggest you to check the link which I forwarded to you to make sure that all the steps have been taken care...
    Still, you are having the problem - please don't hesitate to let me know...
    Cheers,
    Peter J.

  • Hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

    hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

    I had the same problem but looking at what everyone else said, I simpley slowly started to click on all the tabs in the app store, let them load completely, and then clicked back to the updates afterwards. It worked after a little while

  • Iphone 4S signalsabout the update, but when you try to update shows an empty screen

    Iphone 4S signalsabout the update, but when you try to update shows an empty screen

    It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

  • Communication Types missing from ESS Address screen

    We are using the standard Web Dynpro iView for Address (under Personal Information) for ESS.  However, there are no fields on the screen for the Communication Type fields that are on infotype 0006 (P0006-COM01, P0006-NUM01, P0006-COM02, P0006-NUM02, etc.).
    Is there some type of configuration that has to be entered on the iView properties to assign the communication type to each P0006-COMxx value (such as COM01='CELL')???
    Any help would be appreciated!  I haven't been able to find anything in OSS or here in the SDN forums that explain how you make the Infotype 0006 Communication type fields available in the Web Dynpro app.
    Thanks!
    Shannon

    Thank you for your answer!
    I have an SAP PDF presentation named "The New Architecture of Employee and Manager Self-Services (ESS & MSS)" which has a screen shot of the ESS Address screen.  In this document, the screen shot shows an input field for "Cell Phone".  (This presentation is showing the newer Web Dynpro screens, but I do not see a reference as to which ESS business package was used for the screen shots.)
    When I saw this screen shot from SAP, I thought that maybe there was a way to include the communication type fields by defining somewhere which communication type should be used for each field (suchas COM01=CELL,COM02=FAX1, etc.)
    If anyone else has actually seen the Communication Types on the screen, just as the SAP presentation shows, please let me know!  I am curious if these were shown in a earlier release of the ESS Web Dynpro apps.

  • Empty screen after output

    Hi all
    I m facing one problem as i have developed a program and executed it and i got the output everythinh if fine till here. But when i m coming back(F3) from the output i m getting one empty screen and again i have to press F3 to come to selection screen. What will be the problem. actually it is a smartform but it is not empty page i m getting.
    pls help....

    got the solution.

Maybe you are looking for