ESS Error after imported EA-HR 602

Hi all,
I was imported enhancement pack 2 for single component EA-HR (602) as requested by client to use function "HCM Processes and Forms" according to sapnote below:
Note 1024326 - Corrected UI for role HR administrator available
HCM Processes and Forms:
The following technical components are prerequisites for HCM Processes and Forms with Enhancement Package2 (EHP2):
EA_HR 602 (imported)*
BP ERP05 HR Administrator 1.11 (imported)*
All the requirement that addressed in below sapnotes had been checked before proceed:
Note 1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0
However, we encountered problem accessing ESS in Portal after we imported EHP2 for EA-HR:
ERROR LOG
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Syntax error in program SAPLPTRA_UTIL_MAIN      error key: RFC_ERROR_SYSTEM_FAILURE
We ran a consistency check for program SAPLPTRA_UTIL_MAIN and encountered syntax error:
ERROR LOG:
Function Module PTRA_UTIL_WELCOME_SCREEN_GET
Statement "RP_IMP_C1_TC" is not defined. Check your spelling. .
According to change document of the program, it was modified during importing of ehp2 EA-HR.
Currenrt Support Package Level :
Component     Software Component      Level
SAP_ABA                    700                     0015
SAP_BASIS            700                     0015
ST-PI                    2005_1_700     0006
PI_BASIS                    2005_1_700     0015
SAP_BW                    700                     0017
SAP_AP                    700                     0012
SAP_APPL            600                     0013
SAP_HR                    600                     0029
EA-IPPE                    400                     0013
FINBASIS                    600                     0013
EA-RETAIL            600                     0013
EA-PS                    600                     0013
EA-HR                    602                     0000
EA-GLTRADE            600                     0013
EA-FINSERV            600                     0013
EA-DFPS                    600                     0013
EA-APPL                    600                     0013
Do we missed out any prerequisite support packages?
Appreciate if any advise providen.
Thanks.
BR,
Nancy

Hi Nancy,
From your system component information, EA-HR still in SP 00.
You are recommended to import SP for EA-HR ehp2 once installed EHP2 package.
You may try to import support package for EA-HR and let c if it works.
Help me dapao. Thanks
BR,
Terry
Edited by: Tow Terry on Mar 20, 2009 4:40 AM

Similar Messages

Error after import external webservice(RFC) wsdl url to Process Composer

Hi all,
I try to use RFC webservice in my BPM as below:
1. Expose RFC as webservice using CAF (import external service RFC and then create application service use this external service)
2. Define Destination in NWA.
3. Create a Process Composer project, and import the external webservice(RFC) wsdl file as service interface in the project.
After importing, i get error : the port type specified for the ...binding is undefined. Check port type name and ensure it is defined.
If i import another external service, not RFC (such as business object), there is no error.
My system is NWCE 7.11
Thanks in advance,
Sinh.
Edited by: Sinh Nguyen Van on Jul 20, 2009 8:29 AM

Hi Bharath,
Below is content of wsdl url and error message, thanks
Error message:
The 'zfm_rfc_caf_as' port type specified for the 'zfm_rfc_caf_asBinding' binding is undefined. Check the 'zfm_rfc_caf_as' port type name and ensure it is defined.
wsdl url :
- <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as" xmlns:b0="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as">
<import namespace="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as" location="http://sinhnv-lap:50000/zfm_rfc_caf_as/zfm_rfc_caf_asBeanImpl?wsdl=binding&mode=ws_policy" />
- <service name="zfm_rfc_caf_as">
- <port name="zfm_rfc_caf_asBindingPort" binding="b0:zfm_rfc_caf_asBinding">
<address xmlns="http://schemas.xmlsoap.org/wsdl/soap/" location="http://sinhnv-lap:50000/zfm_rfc_caf_as/zfm_rfc_caf_asBeanImpl" />
</port>
</service>
</definitions>
Edited by: Sinh Nguyen Van on Jul 22, 2009 4:18 AM

RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load

Hi;
I imported Support Package SAPKW70022 but after import data load from MSSQL gives error RSM2052.
How can I solve my problem.
Best Regards.

Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK

Color/Picture Error After import to LR4.4

After importing RAW FIles from my 5D3 into LR4.4 on my (fresh installed) win7 PC it looks like this:
has anybody seen that before and/or has an idea why? I tried it with the same files on a actual mac and there were no problems at all.
thx
martin

thx for the answer!
for now i can rule out the CF Card.
i used the same reader, but i'm not 100% certain for now, since i sometimes have to plug it in twice on the mac (but yeah that could be a prob with teh mac as well). i test it with another one tonight. also another hard disk as destination.
thx again for your fast answer!
martin

Receive an ORA-01403: no data found error after importing

After making changes to an application and exporting it and importing it into another applications (copy of the app) on the same server I recieve this error.
Error Single Sign-On Procces Failed
However if I export and import the application to a different server it works fine.
This is done in APEX
Thanks,
Joyce
Edited by: user11806126 on Aug 21, 2009 1:53 PM

Again, please tell us your first name and show it in your forum profile to help us. Thanks.
I asked you before to provide the versions of every major component in your configuration (apex, database, etc.).
After making changes to an application and exporting it and importing it into another applications (copy of the app) on the same server I recieve this error.Is it relevant that you made changes to the application or does this problem manifest itself with unchanged versions of the application that you export and then import/install into the same apex instance? Did you install it in the same workspace or a different workspace?
If you can install the application into your workspace on apex.oracle.com we might be able to find some clues.
Scott

Navigator display returns error after import

I am able to run the export/import successfully (while attempting to transfer an entire application from one instance to another).
However, when I browse through the Navigator on the target instance, I get this error:
An unexpected error ORA-01422: exact fetch returns more than requested number of rows occurred when executing default_action action of the APP datasource. (WWC-38130)
Any ideas?
Thanks.

I am sure, It created another provider, with same name.
Easiest solution for this problem would be restore backup, remove providers from destination which you are planning to import from source.
I know this is not the solution anybody is looking for, but after spending good time to look for tables where the providers are stored & other referencing entries in different tables.
It will take you for ride. If you want to go for one.
Vikas

Connect-MsolService error after importing MSOnline module

I'm receive the following error when I run Connect-MsolService -
Exception of type 'Microsoft.Online.Administration.Automation.MicrosoftOnlineException' was thrown. + CategoryInfo : OperationStopped: (:) [Connect-MsolService], MicrosoftOnlineException + FullyQualifiedErrorId : 0x80090345,Microsoft.Online.Administration.Automation.ConnectMsolService
+ PSComputerName : xxxxx
Background - I am using powershell to manage Active Directory, Exchange and Sharepoint Online user data. I have an SSIS package that dynamically builds arguments passed to powershell scripts for creating new and updating existing AD user data, adding/updating
necessary security and distribution groups for each user, enabling exchange mailboxes, and passing custom attribute data to Sharepoint online user profiles.
In effort to maintain the purity of the SQL server running the SSIS package, dynamic sessions are created to servers having the modules necessary for import. This allows me to do all of the things mentioned above without having to install the different modules
on my SQL server.
My final hurdle is automating the Office 365 licensing. To script licensing assignments I create a session to our server having the necessary MSOnline module and import it giving me access to the Cmdlets, like Set-MsolUserLicense. However, before I can use
the Cmdlets I have to connect to the MSOLService.
When I run Connect-MsolService, the credentials modal pops as expected, the appropriate credentials are entered (which have been verified a thousand times over), and I receive the error shown above.
These commands all work fine when I run them from the server where the MSOnline cmdlets are installed, but return the error when run post successful import-module on my SQL server.
Here are the commands used for establishing the session and importing the MSOnline module -
$securePassword = ConvertTo-SecureString $Password -AsPlainText -Force
$cred = new-object -typename System.Management.Automation.PSCredential -argumentlist $Username, $securePassword
$outputSession = $Null
foreach($session in Get-PSSession){
if(($session.ComputerName -eq $Server) -and ($session.Availability -eq "Available")){
$outputSession = $session
if ($outputSession -eq $Null){
$outputSession = New-PSSession -ComputerName $Server -Credential $cred -Name 'MSOnline'
Invoke-Command -Session $outputSession -ScriptBlock {Import-Module MSOnline}
Import-PSSession -session $outputSession -module MSOnline -AllowClobber
Connect-MSOLService is the only Cmdlet giving me an issue using these methods. Any help you can provide will be appreciated.

Thanks, Malar. We'd hope to accomplish the connection without having to install anything locally. However, after much trial and error and discussion with Microsoft support team we settled on that the components must be installed locally to work.
So, we finally gave up attempting to use the tools from a remote server, installed the MSOL sign-in assistant and the Azure Active Directory module for Powershell locally and were able to complete the connection.
Rocky

Error after importing PAR file into NWDS

Hi Experts,
I have imported a par file into my NWDS worlspace . While building the project it's giving the following error .
import javax.servlet.http.HttpServletResponse can't be resolved .
While i am organizing the importa , the same import is getting deleted and i am getting a new error as follows .
The project was not built since its classpath is incomplete. Cannot find the class file for javax.servlet.http.HttpServletRequest. Fix the classpath then try rebuilding this project.
jdk1.5 has been configured correctly inside NWDS and i have tested it also .
Can anybody help me out regarding this .
Thanks in advance .

Hi Jain,
Just right click on project to properties->java build path-> add external jars add the jar file servlet.jar.
Venkat.

Error after importing a Resource .xml file

Hellos,
We are moving from development to test.
I wanted to load the Scripted JDBC Resource we have developed. We exported the Resource from idm/debug, removed the id='xxx' elements and then imported the .xml file via Configure/Import file.
Now, I get the error:
ErrorError
java.lang.IllegalStateException: Error attempting to decrypt: Error initializing Encryptor: Missing required Encryption Key: F9388B0C42691A37:7A11431D:1166721AE86:-7FFC
when trying to access the resource in the test environment...
It is a database resource so it has an user/password pair, maybe the Password is causing me grief.
What is this error meaning and how do I resolve it?

greenfan88 wrote:
It is a database resource so it has an user/password pair, maybe the Password is causing me grief.
What is this error meaning and how do I resolve it?That's the point. Password is encrypted with a particular key. Remove password and reenter it on the resourceform.
You could also export the ServerKey from dev, but that seems to be not a good solution (at last, not for me).
regards, M.

Error after importing report

Hi all,
I created a Discoverer report on one instance. One new folder (joined with two old folders) and one new workbook was created. I exported the the following files:
1) business area definition
2) old folder joined with new folder
3) old folder joined with new folder
4) new folder.
5) the workbook.
Before I run the installation script I deleted the the old folders from new instance where it was supposed to be moved. The report is working fine on old instance. I run the installation script and it worked properly (no error in any installation log), now when I run the report i get the error message.
Cannot join tables used in the workbook. Item dependency ".................join shown here........................." not found in EUL. EUL on both the instances are same and one instance is replica of other but when I move the report to that intance it start giving error.
Can anybody tell what am i doing wrong? What could be the error?
Regards,
Usman

Well, I am confused. I don't understand your export step 2 and export step 3 (which seem to be duplicates as well, for some reason).
My normal approach would be to export the business area (step 1) and then export the workbook (step 2). I also don't delete objects out of the target instance. Whether that deletion is leading to your problem, I do not know. Would think not, but could be wrong.
By trying to export selected objects in the EUL as your approach instead, it is possible that you may have missed exporting an object that you needed to export. I am saying that is a possibility - not saying it actually happened. Oracle documentation is not clear on what they mean when you select "business area definition". I doubt this is the issue actually, but I could be wrong to think that.
If you go into Discoverer Administrator in the new instance and select the business area that is involved with this problem, what do you see? I am thinking to look at the join definitions you see for the old folder, and the join definitions you see for the new folder. Write down what you see. Then log off and log into the old instance. Look at the join definitions for both the old folder and the new folder. Are there any differences? You may have to actually look at the join properties for each join on each folder as well, looking for a difference. Especially if maybe you have an internal id difference between the two instances.
Are you sharing folders among business areas? That could be an issue if you are. I started out doing that, only to stop when I ran into problems with promoting from development to test. What can happen is this. Create new Business Area A. Populate iwth folders. Create new Business Area B. Use share folders function to populate with some (but not all) of the A folders. You also create some new folders for B, and join shared folders to new folders in B. A also has joins between shared folders and folders not shared. Shared folders carry the joins across business areas. So if I promoted B before A, I would get an import error because I was trying to import a B folder that had a join to an A folder that did not exist in the EUL. Not saying that is your problem here, but that is why I ask if you might be sharing folders across business areas.
It sounds like either you are missing something (either from the delete or not being exported) or you might have an Discoverer internal id problem, is what I am thinking off the top of my head. Do you have the EUL business area and workbooks installed? If so, you might try using those to see if you can identify the issue. Otherwise this may be a situation where you need to log a service request with Oracle support. It may take someone who can look at your actual data tables to figure out what is going on (something we on this forum cannot do).
Good luck.
John Dickey
Edited by: John Dickey, McCarthy on May 28, 2010 1:17 PM

Permanent error after import IOkit framework

i'm new in this forum.
I'm trying to work with light sensor in iphone but the only framework that permits it is IOKit.
i tried to add the framework follow this guide:
http://ios-blog.co.uk/tutorials/iokit-an-introduction/
but xcode returns me some error.
Error's List: http://pastebin.com/TMimhsXF
i linked the framework in Build Phases and after this i downloaded the header and put in search path(/Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/IOKit.framework) the path .
Now afterward i put the framework ( path of framework)in the framework folder. But when i compiled it xcode returned this error and if i try to remove that framework the problem persist.
How to resolve this problem?

Why are you using MacOSX10.6.sdk if you're building an iOS app?

Error After Importing Transport Request ( DEV to QA)

Hi Experts,
I have transported APCO, AREA and IOBJ. Now I'm transporting Infosource for Master Data. For testing purpose I've transported 0EMPLOYEE (transfer rules & transfer structure).Its failed with return code 8.
The following log was displayed..
Data element for InfoObject TXTMD could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. When creating such a data element for InfoObject TXTMD errors occurred. The data element should be of type CHAR and length 000040.
Procedure
Check the log.
Check the data element /BIC/OW_###################### in ABAP Dictionary. Activate data element /BIC/OW_###################### there, and, if necessary, check the activation log.
Error when determining a number from object BI_TSDTEL and number 01
Message no. RSAR711
Diagnosis
When determining a number from number range object BI_TSDTEL and number range interval 01 an error occurred.
Procedure
Ensure that the number range object BI_TSDTEL and number range interval 01 have been created and free numbers made available.
Data element for InfoObject TXTMD could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. When creating such a data element for InfoObject TXTMD errors occurred. The data element should be of type CHAR and length 000040.
Procedure
Check the log.
Check the data element /BIC/OW_###################### in ABAP Dictionary. Activate data element /BIC/OW_###################### there, and, if necessary, check the activation log.
could anyone tell me what are the actions should be taken prior to transports to Quality/Production.
Please provide inputs for this .........
Thanks&regards
SK

Hi Bhanu,
Thanks for your reply, but in this case I am getting the same error message for
the following objects also.
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Data element for InfoObject AUFNR 0PM_ORDER could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject TXTMD could not be created
Data element for InfoObject EVDAT 0DATE could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
As per the note given by you I would like to know about BI_TSDTEL. Because when I am trying to created number range for this object its showing pop-up that objects can only created by SAP package and these objects could not be saved under local package.
Please tell me the procedure for this, how can I solve the above problems.
Thanks & Regards
SK

Front end application error after import script run successfully in R12

Hi ,
i got an exception in R12 environment.
i developed one simple OAF page and deployed in apps import script run successfully.
but when i am opening that page in Front end it will give an exception.
That is
Exception Details.
oracle.apps.fnd.framework.OAException: Could not load application module 'tflsm.oracle.apps.po.per.server.TflsmAM'.
## Detail 0 ##
JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
i will check all the class files and xml files of Application Module below top, all are there in the server top(below top)
/u02/TST22/apps/apps_st/comn/java/classes/xxfls
but i got the exception.
is there any different structure in R12.
i.ein the server top /u02/TST22/apps/apps_st/comn/java/classes/xxfls (Here my all class files in Binary mode and xml files in ASCII mode)
only CLASS files are needed or XML files are also need.(i am moving all CLASS and XML files)
could you please help me on this.
Thanks with Regards,
Muthu

Muthu,
This issue usually occurs when the AM.class file is not available at the given location. Try to find out on the server whether this
tflsm.oracle.apps.po.per.server.TflsmAM exists.
If still the problem persists then go for redeployement by deleting the existing one.
Regards,
Gyan

Urgent:Error while importing project in ODI..plz help

Hi All,
We are getting below errors after importing the project folder.
In interfaces having file as source datastores, we are getting below errors
1) On source datastore,its giving error that "could not build the property panel for an object".
2) On requesting for data of source datastore it is showing:cannot display data: datastores are not on the same data server
3) On executing the interface its giving below error:
--the object no longer exists
Also, we are not able to see any field of source datastore(technology-File) in Source panel in the interaface after we imported project.
Message was edited by:
user625028

Make sure that, you might have selected Duplicate mode while importing
and data stores id may be different .

Transport Error when Importing appset in target system

We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
      Start of subsequent processing ... 20110519104427
      End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
      Start of................ 20110519104506
      End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

ESS Error after imported EA-HR 602

Similar Messages

Maybe you are looking for