ESS Error e - Employee cannot see the line manager

Hello,
I am new to ESS/MSS. I just have been forwarded the query where an employee can not see his line manager. The manager can see him in his employee list.
Your assistance would be greatly appreciated.
Many Thanks

Hi,
Please check whether the employee is able to see his manager in ECC using standard FM ASR_GET_LEADER.
Thanks
Mustafa

Similar Messages

Cannot see the components in ESS after import it into CBS

Hi all:
After we import ESS 100 ( in ECC ) into JDI. Then in NWDS we can see the configuration, but we cannot see the components inside the ESS repository.
In CMS - Transport Studio, we have done the check-in, Development, Consolidation, there are all sucessful.
Anybody can give us some help ?

Hi Jain.
In Development Configurations Perspective
Inactive DCS
I cannot see the design components which I import from CBS
Another question is I meet with problem when I try to activate this ESSTrack in Activation View .
Retrieving pending activities failed: CBS Server Error: The compartment for given software component is being initialized( internal code: BS_SC_META_DATA_NOT_AVAILABLE)

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Error message: "iTunes cannot read the contents of the iPod."

I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

My suggestions, when Restoring the iPod.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
Disconnect all other USB devices, except the mouse and keyboard.
Stop all other programs except iTunes.
Good Luck!

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Why we cannot see the created tracks in NWDI?

We created 3 tracks(A,B,C) in our NWDI.
However,
1) only one track( track A) is showing up;
2) Developers can check in their code into TrackB and TrackC without
error messages BUT we cannot see the code change any where.
So TrackB and C are existing but invisible.
Please help. Thanks! I'll give points
null

Hi,
if you give space in filter ,,, you won't able to see any track ....
clear space and search
Regards
Ben

Urgent:Why we cannot see the created tracks in NWDI?

We created 3 tracks(A,B,C) in our NWDI.
However,
1) only one track( track A) is showing up;
2) Developers can check in their code into TrackB and TrackC without
error messages BUT we cannot see the code change any where.
So TrackB and C are existing but invisible.
Please help. Thanks! I'll give points.

Hi,
if you give space in filter ,,, you won't able to see any track ....
clear space and search
Regards
Ben

Error code: 2147778144 Cannot find the QE property.

I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together. The following were two approaches I knew of to try:
1) using Crystal "unmanaged URL reporting":
a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
2) using the Coldfusion <cfreport> tag:
<cfreport report = "AOC_Summary.rpt"
dataSource = "#variables.dsn#"
username = "userid"
password = "pswd">
{AB145_AMTS.REC_MONTH} = 5 and
{AB145_AMTS.FISCAL_YEAR} = 8
</cfreport>
I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML. The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's. So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work. This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
Management is now telling me that producing the report in HTML is acceptable. I am now trying to set up a demo for management. When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
CrystalReport Integration Exception.
Error code: 2147778144 Cannot find the QE property.
Error source: Crystal Reports ActiveX Designer
I have tried searching the SAP site to find more information on this error message to no avail.   Any guidance would be greatly appreciated.
Regards,
:)mary
Edited by: Mary Fowler on Aug 21, 2008 7:21 PM

I found my mistake. Used wrong .rpt file. (head drooped, tail between the legs)
Thank you for being here!
:)mary

Error Message= x Cannot find the HTML help browser installed on your system.

Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!

Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Cannot see the infoareas through Bex

Hi:
I have requested for and got BI Admin access for a Dev APO server (SCM 7.0). I tried to logon to the Bex query designer but cannot see the infoareas (or the cubes underneath them). There are several infoareas and cubes on the server when I look at them through RSA1.
What am I doing wrong and what should I request for?
Also, the report designer does not come up for some reason. A window is coming up saying that the report designer stopped working, etc. (this is the standard windows message when a program takes too long, etc.)
Appreciate your help with both of these issues.
Satish

The infoareas should show up regardless of whether we have built a query or not. I worked with the security and after a step by step analysis, could finally get to see the infoareas.
Regarding the other issue with Report Designer, it was the same problem described in the thread below
Error message in Report designer "Activate Default Theme: 0TRADESHOW"
The issue was that unless the theme was added through transaction RSOR or RSORBCT, it was acting up when it was trying to come up. After the theme was added, report designer came up fine.
Thanks everyone,
Satish

I like to download e-cards with animation. . However, I cannot see the animation

I like to download animated e-cards, but cannot see the animation.

Rita, welcome to the forum.
It sounds like you need to install Adobe Flash Player.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HT201272 I purchased the August 2012 edition of Consumer Reports and I get an (Error During Download Cannot start the download because the file is missing or invalid)

I purchased the August 2012 Edition of Consumer Reports and I get (Error During Download Cannot start the download because the file is missing of invalid)

Contact support and see if they cna give you a fresh copy. It's probably with the file..

Cannot see the tabbed Page.

Hi,
I want to display two tabs. One for Insert and another for Delete. i have 2 pages one for insert and one for delete.
The following is the setup that I have done.
Functions:
Name: XXHR_NEW_JOB_FAMILY
Type: SSWA jsp function
Html Call: OA.jsp?page=/xxc/oracle/apps/per/selfservice/deployperson/webui/NewJobFamilyPG&OAHP=JOB_FAMILY_HOME&OASF=XXHR_DEL_JOB_FAMILY
Name: XXHR_DEL_JOB_FAMILY
Type: SSWA jsp function
Html Call: OA.jsp?page=/xxc/oracle/apps/per/selfservice/deployperson/webui/DeleteJobFamilyPG&OAHP=JOB_FAMILY_HOME&OASF=XXHR_DEL_JOB_FAMILY
Menus:
Name: NEW_JOB_FAMILY_MENU
Type: HTML Tab
Function : XXHR_NEW_JOB_FAMILY
Name: DEL_JOB_FAMILY_MENU
Type: HTML Tab
Fucntion: XXHR_DEL_JOB_FAMILY
Name: JOB_FAMILY_HOME
Type: Home Page
SubMenu: NEW_JOB_FAMILY_MENU (Prompt: Insert)
SubMenu: DEL_JOB_FAMILY_MENU (Prompt: Delete)
Name: COLT_MGR_SELF_SERVICE_MENU (Responsibility Menu)
Sub Menu: JOB_FAMILY_HOME
After doing this setup, I cannot see the new menu and i cant navigate to the page.
Can any one help me finding the error in my setup so that I can get the link to my page and I can get the tabs displayed.
Thanks in Advance,
Kaushik

Thanks Aj and Reetesh,
But when i directly add function to responsibility as below, i can see the link to the page.
Fucntion:
XXHR_NEW_JOB_FAMILY
Prompt: Insert
After doing so i can see the link on the menu list and i can navigate to the page. I think there is something missing in my setup can you help by giving the details of how to define menus and functions if i want to see the tabbed page do the setup so that i can see the page.
thanks in Advance,
Kaushik

TS1702 I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

Click the Bookmarks icon in the Safari toolbar.
On the right hover your cursor just above the line where you see Bookmark and Address. When you see the small white hand drag up or down as needed to reveal your Bookmarks.
edit by cs

ESS Error e - Employee cannot see the line manager

Similar Messages

Maybe you are looking for