ESS error for Personal data and Family members

Hi,
I am having an error in ESS For pesonal data and Family members.
The error message is
Acritical error has occured.Processing of the service had to be terminated.Unsaved data has been lost.
PL contact you sytem Admin
An exception error has occured that was not caught error key RFC_ERROR_SYSTEM FAILURE.
Thanks
Sasikanth

Check the table V_T7XSSPERSUBTYP.
Also check by the t.code HRUSER if the user have an employee assigned.
Check the log using the T.Code ST22.
Please You should do a trace using the t.code ST01
Hope this help you.
Regards

Similar Messages

Personal Data and Address for Country Grouping 99 - error on ESS

Hello All,
I have configured personal data and address infotypes in ESS for the country grouping 99.
I have done the following config
1. Assign Screen Structure to Infotype Versions
2. Define Active Subtypes and Use Case
3. Define Country-Specific Applications
4. Created a Z service and then assigned this service to subarea.
I made use of US service and copied to z.
after the config when i log on to the portal and check the personal data or address links am getting the error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
the st22 dump is
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
Can any one pls help me

http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
check the steps in above link
and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
INFTY - Now specifies the infotype.
USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
Page 2
SUBTYPE_TAB - Here, you will find a list of the subtypes that have
already been checked and that are correct.
You then find the subtype in METADATA-SUBTY. However, you must move up
one subroutine in the call hierarchy in advance to do this.
This data makes it easy for you to identify the infotype and the subtype
and correct the inconsistency by making entries in the tables mentioned.
ie
T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
for
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
Zeitb = '3'

Issue in confirmation links for personal data ESS application (CA)

Hi All,
We have implemented EXIT button configuration for ESS applications and the Exit button along with 'Go to Home page' link is navigating to custom created page in portal.
The configuration done earlier for ESS applications like Address Update, Family Member/Dependents works fine.
We got a new service added (Personal data) & tried configuring the Exit button for this application also.
Some how the exit button doesnt seem working for Canada besides it working for US.
Please help in figuring out if there is any cause of the Exit button not working for personal data application for molga 07 specially. Adding to it, the links for confirmation screen are also not working for the same application
Appreciate your help.
Thanks

Hi,
As per your Req.....
Its seems to be the Services exits that are county specific Services .........mease the Molga ( country Code ) is set for this services is "US"
That Y its working fine .....
But as per your REq you want this Services working for the Molga 07 ...
I thikn for this you need to set the Molga 07 in the contry specific home pages......
Then it will work fine

I have 2 iPhone 4S's, one is personal, one purchased by work for me. Can I use the same iTunes account to sync both phones while keeping the contacts that are synced as separate lists for personal phone and work phone, but also allow same apps for both?

I'm hoping someone out there knows if I can use 1 apple ID and 1 iTunes account to sync 2 different iPhone 4S's - one for personal use, and one for work use. I would like to be able to sync with the same music and app's on both, but need to keep the contacts and calendars completely separate between the 2 phones since I don't want personal data on the work phone or work data on the personal phone. Can you help me figure this out?

Yes!
Luckily, if you be very careful and pay attention to what you have selected in itunes, you can separate these things
Basically, in iTunes, there are tabs at the top for Summary, info, apps, etc..
These tabs control PER DEVICE what syncs between itunes and the device.
Therefore, you can plug iPhone 4S #1 in, and select to sync contacts with address book, then do so. Then plug iPhone 4S #2 in, and not choose to sync with address book. iTunes will keep these settings separate. However, in that situation for music and apps, you would check to sync both on both, in order to get all music and apps on each.
The only thing to watch out for, each computer 'user' has only one set of address book and ical, meaning that if you want to sync both phones to the computer, but dont want to mix contacts, only one phone will be able to sync contacts and/or calendars. Basically, each category in the Info tab will only hold one device's information, so you CAN do contacts with iPhone 4S #1, and calendars with #2.

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

Will Backup be updated for iCloud for Personal Data & Settings?

Now that MobileMe has shuttered, the Backup prgram is useless to backup personal data and settings from my Macs. It appears that iCloud will only backup data from IOS devices. I am unhappy that the feature set for the Mac has, in effect, been reduced.
Yes, I could use Dropbox or the like, but you can't put your personal data and settings in it because the data has to be in certain folders for the OS.
Any news, information or ideas about this? Is this addressed in 10.8?
Robertok

No one here can say what Apple will or will not do.
If you want my guess, I say there is no chance at all of Backup getting rewritten for iCloud.
Allan

Flexiblization for Personal data

Using flexibilization for personal data in EREC6.0, I added the SSN to SAP/HRRCF_PERS_DATA/PERSDATA_M.BSP in context - EXTERNAL and made it optional. Regenerated the URL.s.
The issue is that the added field for the candidate is not appearing on the Candidate BSP.
Any ideas would be appreciated.
Regards,
Sunil

Hello Nikita,
when creating the link for your customer application you had to define a new logical application in table T77RCF_LOG_APPL. These applications are authorization checked. The authorization object herefore is P_RCF_APPL field RCF_APPL. In the standard role for the external candidate SAP_RCF_EXTERNAL_CANDIDATE you find it under Human Ressources -> Applications in E-Recruiting. Here you define the authorization for startpages (IDs) and logical applications.
Best Regards
Roman Weise

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone.

User login report in Active Directory for specific date and time

I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply please

You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity. Thanks

As per adobe agent chat representative, the following question is posted on the fórum to obtain an answe from adobe.
What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity.
Thanks
<moved from downloading,installing,setting up - kglad>

Illustrator is not working as it should...
I want them to compare the original size and date of creation with what I have installed on my computer... I have installed several times with my original CD and I tried once downloading the files from the adobe site (using my own license). I suspect the files has been modified or renamed on my laptop by an external unauthorized user causing the malfunction of the application.
Customer services does not support CS3 anymore and the updates / patches in the adobe site does not solve the problem... They redirect me to the forums for support...
Presently, my problem is that after creating a swatch and drag it to the swatch panel, it does not fill as it should a new form... Now, after deactivating and activating my license the swatch seems to fill the new form but when the filter that the swatch has is persistence in the next filling object created even though a different color is being used as a fill (X)... Help in the creation of a swatch over the internet just complicate the issue.
That's why I would like to know whether updates on my product are being received or files are being replaced without my knowledge...
Thanks...
PS Do you know how to contact a staff adobe employer on the forums?

Change Time Constraint for Personal Data InfoType

Hi,
How to change the Time Constraint for Personal Data InfoType.
I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
Thanks

Hi,
you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
ex:- without personal details like names no personnel will exist in an organization.
regards,
Soori

Back up of personal data and settings

I've upgraded to Yosemite and have been hounded by back up to back up my personal data and settings to idisk which it informs me hasn't been done since 2008. This is curious and clearly off base but should I do anything in response? And, how does one stop the backup prompts?

You need to have a backup, preferably 2 on 2 separate drives. Oops happen.
Time Machine Versus Clones and Archives
Commonly Used Backup Methods

Approval process for Personal Data Change in ESS

Hi Experts,
We need to implement approval process from Manager whenever the employee changes his Personal Data through EP in ESS.
Is there any standard method or process for doing that. Or any way of doing it without customization.
Thanks
Ash

Hi,
Do the Admin Personalizations in Portal, follow the note
1234273 and do the Personalization accordingly.
Hope this helps.
Cheers-
Pramod

Install Window 7 Via BOOTCAMP and create extra partitons for Personal Data

Hello All;
I'm new to Mac, Just purchased the MBP Mid 2012 non retina 2 months ago.. and upgraded to Mountain Lion 10.8.2
I'd like to Install Winows 7 via BOOTCAMP and have extra 1 or 2 partitions (ExFAT) on the same drive for my personal data, any advise on how to do this properly... I tried in many different ways but always ended up hitting the wal..
Appreciate the help.

Won't work.
http://www.apple.com/support/bootcamp/

How to change the   Success Message for Personal Data Screen in ESS

Hi,
       While saving the Personal Data in the ESS I want to chage the Success message.When I check the DC , Message Class i am not able to find the the particular string.Can any one please guide how to find the Success Message String   for this Personal Data Screen or Which BAPI I have to check .
Regards
Alexi

Hi iidhya ,
Please find the code below
    public boolean onEvent( )
    //@@begin onEvent()
    String event = fpm.getEventData().getEventName();
          if (event.equals(IFPM.EVENT_ADD)){
               wdThis.wdGetFcPersInfoInterface().setModeForCreate(selectedSubtype);
          }else if(event.equals(IFPM.EVENT_EDIT)){
               wdThis.wdGetFcPersInfoInterface().setModeForEdit(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          }else if(event.equals(IFPM.EVENT_REMOVE)){
               wdThis.wdGetFcPersInfoInterface().setModeForDelete(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          return true;
    //@@end
Regards
Alexi

ESS error for Personal data and Family members

Similar Messages

Maybe you are looking for