ESS Error- User Username Does Not Exist in this Period

Hi all,
I am getting the error as follows when I tried to get into any of the Sub iview like Address, Change Own Data etc
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
  User <Username> does not exist in this period  
I saw a thread but it doesn't resolve that error.
Actually I didnt assign my user to any employee.Is it mandatory to assign an employee to the user in PA30 because my user is a test user.
Then in the logon ticket the name should be same as my userid in portal and ECC.
Please this is very important gimme some good suggestion.

Hi  Jayesh,
Thank you. It was solved but while tried to access 'Change Own Data'. I am getting the error like
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
  An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE 
Please give me some suggestion.
Thank you.

Similar Messages

  • Employee Self Service ESS User username does not exist in this period

    Hi,
    1. I have created portal user and mapped to ECC6 user.
    2. I have linked the ECC6 user in PA30 in 105 infotype/subtype 001.
    3. the Begin Date / End Date is right.
    but still,
    <b>Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.</b> 
    <b>   User <username> does not exist in this period  </b> 
    Please let me know if there is anything i have to do.
    Thank you,
    Boobalan

    Hi,
    I have assigned the PA30 infotype and also checked the validity of the employee and the R/3 user. but still i get the same error.
    i have also went to the administrator console /webdynpro/welcome/welcome.jsp
    I have also given the new username in the JCo Connection which has been created tempority. It shows the same error. I could find that it is not related to PA30, as the new user was not assigned while testing.
    Before and after changing of the personalize of the user also it is showing the same error.
    Please let me know is there anything.
    <b>I have cheked in R/3 by typing the Transaction Code PZ01, it shows the same error.</b>
    Regards,
    Boobalan
    Message was edited by:
            Boobalan S

  • ESS Error - User id does not exist

    Hi All,
    When the user click on personal information - Emergency address link on the portal, user gets error "user XX does not exist in this period".
    This proble is only for this particular user.
    on the back end an abap dump with following error message is encountered.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO 
    Exception              CX_SY_REF_IS_INITIAL           
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it    
    has                                                                            
    come across a statement that unfortunately cannot be executed.                  
    I checked the data is maintained in IT0105 an IT0002 correctly. Even the table V_T7XSSPERSUBTYP has value for IT0006 with correct usecase.
    The user has a hiring date of 13.07.2009 and IT0105 also has the start date as 13.07.2009 can this be  the reason? Since the validity is not for complete month?
    Please advise what could be the possible reason for the above error. How to solve the problem
    Regards,
    Swati

    Hi,
    you have to map the EP user to an employee at the backend for the ESS services to work.
    Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
    This will solve the issue.

  • User does not exist in this period

    Hi ,
       I am facing the problem when i access Overview -> Who's who
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User <Username> does not exist in this period
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:267)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:222)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.hr.wiw.FcWiwBusinessLogicComp.onInit(FcWiwBusinessLogicComp.java:217)
         at com.sap.xss.hr.wiw.wdp.InternalFcWiwBusinessLogicComp.onInit(InternalFcWiwBusinessLogicComp.java:414)
         at com.sap.xss.hr.wiw.FcWiwBusinessLogicCompInterface.onInit(FcWiwBusinessLogicCompInterface.java:115)
         at com.sap.xss.hr.wiw.wdp.InternalFcWiwBusinessLogicCompInterface.onInit(InternalFcWiwBusinessLogicCompInterface.java:298)
         at com.sap.xss.hr.wiw.wdp.InternalFcWiwBusinessLogicCompInterface$External.onInit(InternalFcWiwBusinessLogicCompInterface.java:358)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.hr.wiw.selection.VcWiwSelectionComp.onInit(VcWiwSelectionComp.java:212)
         at com.sap.xss.hr.wiw.selection.wdp.InternalVcWiwSelectionComp.onInit(InternalVcWiwSelectionComp.java:206)
         at com.sap.xss.hr.wiw.selection.VcWiwSelectionCompInterface.onInit(VcWiwSelectionCompInterface.java:162)
         at com.sap.xss.hr.wiw.selection.wdp.InternalVcWiwSelectionCompInterface.onInit(InternalVcWiwSelectionCompInterface.java:144)
         at com.sap.xss.hr.wiw.selection.wdp.InternalVcWiwSelectionCompInterface$External.onInit(InternalVcWiwSelectionCompInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Kindly help me to solve this problem.
    Thanks
    Jibin

    Hi,
    you have to map the EP user to an employee at the backend for the ESS services to work.
    Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
    may be the dates were correct but the user maintained incorrect entry in IT0105...wrong username...
    This should solve your issue.

  • User does not exist in this period / ESS does not work anymore ;-(

    Hello experts,
    starting any ess application on portal side (leave request), I get the follwoing error code:
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User TESTUSER does not exist in this period
    Starting application personal data I get the message: "There are no services in the area."
    I know, that this error has often been discussed in this forum. So I check the hints I found, but I could not solve my problem.
    The HR user TESTUSER is assigned to the portal user TESTUSER in IT0105 and the user is not exceeded.
    TESTUSER got SAP_ALL on HR side.
    The error appears for all users, that worked propably a few days before.
    Login on portal side and HR works. ESS overview is shown for TESTUSER. For a user that has not a login to HR system it does not appear. So the single singn on (SSO) between portal and HR system seems to work.
    The ESS applications worked fine until two days ago. Portal guys said, they had not done any changes on portal side.
    Where could the error occure on HR side? How can I recognize if any changes have been made on HR side?
    Thank you for your help.

    TX HRUSER seems not working.
    Using the function 'Set Up and Maintain ESS User (Overview)' in TX HRUSER with my test-PERNR it is shown under 'Employees with deleted users'.
    Clicking on it I got the Information:
    PERS.NO: 12345678 (i.e.) NAME: Test User FROM: 01.01.2011 TO: 31.12.9999 USER: Name:  FROM: TO: User does not exist.
    But in IT0105 the PERNR is assigned to user TESTUSER in that period.
    When I try to assign  PERNR to TESTUSER with TX HRUSER under 'Assign Employees to Existing Users' I read the follwing information:
    USER: TESTUSER Name: FROM: 01.01.2011 TO: 31.12.9999 USER GROUP: IT PERS.NO.: NAME: FROM: TO: no employee assigned.
    Trying to 'assign employees' I get the message 'Error occurred when creating relationship for user ESSUSER-B to employee'.
    Please create the appropriate assignment manually in HR master data.
    But I have assigned it manualy in IT 0105.
    Concurrent employment (CCURE PAUIX) is not activated.

  • Web Service error: User [oc4jadmin] does not exist in system

    Attempting to create a HelloWorld Web Service (WS) using JDeveloper 10.1.3 and deploying to OAS10g 10.1.3. Create the WS, deploy to OAS10g, test the Service from OAS10g - not a problem!
    Then enable WS-Security and specify a cleartext password - ONLY. Then when test it from OAS10g I get the following output (HTTP Analyzer): User [oc4jadmin] does not exist in system.
    Which is patently false as I login with oc4jadmin!
    Anyone have an idea what is going on here???????
    THANKS - Casey
    P.S. Thanks in advance for any help

    Casey, see if either of these help:
    Securing a Web Service Client Using WS-Security (viewlet)
    http://www.oracle.com/technology/products/jdev/101/viewlets/101/xesecureunitedloanclient_viewlet_swf.html
    Securing Web Services using JDeveloper and WS-Security
    http://www.oracle.com/technology/products/jdev/101/howtos/securews/index.html
    Oracle JDeveloper 10g (10.1.3) Documentation: Working with Web Services
    http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CJAEHFJD/vtTopicFile.adfdevguide%7Cweb_services%7Ehtm/

  • IT105 warning message "user does not exist in this period"

    Does anyone know if we can change the warning message on IT105 subtype 0001 to be an error message?  This is causing an issue when HR are entering the User ID before it's been created in SU01, so sometimes there is a mismatch.
    Hope you can help, thanks in advance!

    This message is hardcoded as a warning in the method CHECK_USERID_EXISTENCE. Like it was suggested above, you will need an access key to change it into a message type 'E'. Other option is to do this validation via the AFTER_INPUT Method of the BAdI HRPAD00INFTY.
    ~Suresh

  • Pcuigp.xssfpm.java.FPMRuntimeException: User J2EE_ADMIN does not exist

    Hi colleagues,
    We are getting the following error in Personal Information of ESS(Employee Self Service)
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User J2EE_ADMIN does not exist in this period
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:267)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:222)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverview.onInit(VcPerAddressUSOverview.java:302)
         at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverview.onInit(InternalVcPerAddressUSOverview.java:287)
         at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverviewInterface.onInit(VcPerAddressUSOverviewInterface.java:187)
         at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface.onInit(InternalVcPerAddressUSOverviewInterface.java:152)
         at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface$External.onInit(InternalVcPerAddressUSOverviewInterface.java:236)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
    System configuration is EP7, Oracle database.
    Could you please assist me to resolve this issue.
    Thanks & regards,
    Pavan.

    Hi,
    you have to map the EP user to an employee at the backend for the ESS services to work.
    Go to transaction HRUSER and check whether an employee is connected to this USER_ID.
    If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
    Check the start DATE and the END date of the same PERNR of infotype 105 subtype 0001
    This will solve the issue.

  • ESS mixed up users & ESS user not existing in this period

    Hi all
    I really hope you can help me in one way or an other. I am still quite new to SAP and SDN so have a bit leniency
    At my company we have two demo system here and my job is right now to implement the ESS scenario. We have on the one side a EP 7.0 SP 09 and and on the other side an ERP 2005.
    There have been allready the needed Business Packages for the ESS scenario deployed.
    My job is right now to implement the ESS scenario between the EP and the ERP.
    But I got nearly the same problems. Every time i am going to test some ESS- iViews, for example:
    ESS->working time->leave request (iview)
    or ESS->employee search ->change own data (iView)
    the following Massage appears:
    "User MISTRY does not exist in this period"
    <b>And now something really wired!</b>
    I am <b>logging into the system with the user "stefan"</b> (which is has the super admin role) <b>but the user wihch is reffered in this message is an user from another admin</b> (also super admin, but he was the person who deployed the Business Packages).
    So now i don't get further... i searched already on SDN and service.sap.com , i found a JDI /NWDI Cook book...but all of these doesn't really help me out...
    BTW: is that the ESS cook book you were talking about?
    Perhaps one of You allready knows a solution or another purchase (starting point) i could investigate ...
    Thanks very much for your efforts !!!
    Kind and best regards
    Stefan

    And here is the Exception itself:
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    User MISTRY does not exist in this period
    User MISTRY does not exist in this period:
    <b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User MISTRY does not exist in this period
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:257)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:220)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
         at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
         at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
         at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onInit(FcCodBusinessLogicComp.java:188)
         at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onInit(InternalFcCodBusinessLogicComp.java:355)
         at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onInit(FcCodBusinessLogicCompInterface.java:115)
         at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.onInit(InternalFcCodBusinessLogicCompInterface.java:147)
         at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.onInit(InternalFcCodBusinessLogicCompInterface.java:215)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
         at com.sap.xss.hr.cod.start.VcCodStartComp.onInit(VcCodStartComp.java:168)
         at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartComp.onInit(InternalVcCodStartComp.java:145)
         at com.sap.xss.hr.cod.start.VcCodStartCompInterface.onInit(VcCodStartCompInterface.java:161)
         at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface.onInit(InternalVcCodStartCompInterface.java:144)
         at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface$External.onInit(InternalVcCodStartCompInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java(Inlined Compiled Code))
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java(Inlined Compiled Code))
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java(Compiled Code))
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:222)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1280)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:552)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:596)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:827)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:683)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    </b>

  • Target 'install' does not exist in this project ",this is the error i get..

    i get this error when i try to install ,with the command : ant install,
    a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • Target 'install' does not exist in this project (TOmcat)

    i get this error when i try to install a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!
    Message was edited by:
    TheBeginner_77

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • JSPM phase error : admin/user/SID does not exist

    Hi ,
    There is an error message while opening the JSPM
    Phase error report:
    "cannot read secure store properties .could not set up secure store.property admin/user/SID does not exist.msg.util.dyn.0003.com.sap.security.core.server.secstore.secstoreFS get string value
    com.sap.security.core.server.secstore.secstoreFS.Not found exception could not find a record key "admin/user/SID" in the store com.sap.security.core.server.secstore.secstorefs"
    checked the config tool secure store and found no entry maintained for /admin/user/SID.
    How to add the new entry in config tool and what is post entry procedure
    Thanks a ton

    Hello Daniel,
    You can maintain the Administrator user in secure storage using the config tool.
    By default, the value for this config tool property is user Administrator. However, when using the ABAP Engine for persistency, this user is J2EE_ADMIN.
    Following are the steps:
           1.      Start the Config Tool.
           2.      Select secure store.
                    The configuration for the secure storage in the file system appears.
           3.      Select the key admin/user/<SID>.
           4.      Enter J2EE_ADMIN in the Value: field and choose Add. 
           5.      Select the key admin/password/<SID>.
           6.      Enter the password for J2EE_ADMIN in the Value: field and choose Add.
           7.      Save the configuration.
    The corresponding link is mentioned below:
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/b7ceff3e40fd42be3a6503236f9746/content.htm

  • Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.

    We are on mySAP ERP 2004, and using ESS 60.2 version.
    In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
    "Service EMPLOYEE_ORGCHART_SERVICE does not exist".
    Has anyone come across this?
    Any suggestions on how to fix this is highly appreciated with points.

    Hello John,
    The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
    Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
    Service Short Key - EMPLOYEE_ORGCHART_SERVICE
    If its not there then you need to create one entry like this:
    Service Link Text    Orgchart                                                    
    Service Type         WebDynpro application                                       
    Link Resource       EMPLOYEE_ORGCHART_SERVICE
    Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
    This entry will have following details if its exists(else create with following details):
    Resource Key         EMPLOYEE_ORGCHART_SERVICE
    Description     Orgchart                           
    Server                                             
    Directory Path  sap.com/ess~org                    
    Object Name     Orgchart                           
    URL Parameter                                      
    Window Name          Orgchart                      
    Window Properties                                  
    URL for PCD Page:
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
    After maintaining these entries it should work.
    Regards,
    Shubham

  • Error System "Item does not exist. It may have been deleted by another user"

    Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
    This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
    Sometime User can not save item , it show that error
    This List not have workflow and code
    Please let me know what is the issue ?

    Hi,
    Greetings. THis is a known issue and see the links for resolution
    http://support.microsoft.com/kb/972225
    http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
    Please remember to click 'Mark as Answer' on the answer if it helps you

Maybe you are looking for

  • INSERT 'PAGE BREAK' AT CHANGE IN EACH TOTAL

    Hi... Does anyone know a way of inserting a page break at each change in a total on a report, so when the report is printed it prints each section (i.e. each time it finds a total) on a separate page. I also want to print the report title on each pag

  • Wireless not working on boot

    I have an older PC (so it's not moving much...), and I'm trying to set up wireless connection trough a USB wireless adapter (Ralink Technology, Corp. RT2501USB Wireless Adapter). I have the correct drivers installed, and everything set up (doulbe che

  • Why does my camera have dark spots?

    The camera displays several dark spots when the camera is open. The photos taken also show these spots. Any help?

  • Q: Auto file naming in TextEdit possible?

    I've just come over from the 'Dark Side' having been freed from the 'MicroSith' Empire and I'm really enjoying my two new Macs. I'm taking some extra time to set it up like I want. I'm interested in productivity. Is there a way to cause TextEdit to t

  • Reg Selection Screen Events

    Hi Friends, I have 3 input field  and two radio button in my selection screen, On clicking the first radio button, the sum of two fields should be displayed in the third input field. Similarly when i click the second radio button, the multiply of two