ESS Family Data - can't remove field Date of Birth

Hi to everyone.
I have a problem with ESS Personal Information part - Family Data.
In portal we don't need field called "Date of Birth" witch is mandatory and must have an information.
My question.
How and were I can remove this field or make it not required?
Jury

Hi Jury,
You have to modify the webdynpro Java code to remove the date of birth field.
It cannot be done thru configuration as far as i know.
Regards,
Sharadha

Similar Messages

How can I remove birthday date on my iPhone 4

How can I remove birthday date on my iPhone 4

Find the person whose birthday you want to delete in your contacts and check if their birthdate is there. If yes, simply edit the contact and delete the birthday field.

Can you remove a date and time stamp off a photo that has already been taken?

Can you remove a date and time stamp off a photo that has already been taken?

only with Photoshop or similar software that offer some clone/heal feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Can I remove the date and time from an image taken on my Powershot SX510 HS for printing?

Natalie1, Once the photo is processed in the camera with the date stamp, it's permanent to the photo. The camera will not have that as a layer to turn off and on at will. It's much easier to add the date/time stamp to a shot for printing then it is to remove it. You will need some editing software such as Photoshop Elements, or Gimp (free), to remove the date/stamp. These software's can do a pretty reasonable job to remove any unwanted elements from the photo. Canon also has their Digital Photo Professional software that comes free with the camera, but it's not as easy to get the nice results of the Photoshop Elements. The change you make with these software's will remove the date/time stamp unless you only mask (layer) it. Steve M.

Natalie1, Once the photo is processed in the camera with the date stamp, it's permanent to the photo. The camera will not have that as a layer to turn off and on at will. It's much easier to add the date/time stamp to a shot for printing then it is to remove it. You will need some editing software such as Photoshop Elements, or Gimp (free), to remove the date/stamp. These software's can do a pretty reasonable job to remove any unwanted elements from the photo. Canon also has their Digital Photo Professional software that comes free with the camera, but it's not as easy to get the nice results of the Photoshop Elements. The change you make with these software's will remove the date/time stamp unless you only mask (layer) it. Steve M.

Can Not Remove "with" Data from Calendar Event Details

I currently have a Palm Tungsten|E2. For a short time I used to sync it with my work computer; this was before they replaced the computer (lease was up) with a new one where it was locked down and I could not reinstall the Palm desktop. Since then I have been syncing it with my home computer that runs MS Vista. Just recently I have noticed that when I create new Calendar events on my Palm, they all get a new "With:" data line (and a user from my old job) after sync'ing with my home computer. Selecting this "With:" entry brings me to a screen that allows me to select from a list of people I may "Done", "Reply", or "Reply All" to; although selecting either reply only causes a fatal error that requires a soft reset (button on back of machine). Looking at the event through the desktop software shows no data point so that it may be cleaned.
I would like to know why my desktop software is adding this person to a "With:" data point to all new entires I create on the Palm hardware, how do I turn it off and keep it from doing it in the future.
Steve
Post relates to: Tungsten E2
This question was solved.
View Solution.

Are you sync'ing the new device to the same username in Palm Desktop as an older device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Looks like you may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Post relates to: Palm i705

PSA data - can we revert back data in PSA ?

Hello friends ,
Can i revert back the data from PSA - somehow the request has been deleted from PSA.
In our system , we refresh the PSA after every 15 days , and I need a request which is older than 16 days .
When i click the PSA , I am not able to find out this request , because it is deleted from PSA .
Is there any way , where can i revert back the request in PSA.
Plz note , i can not load the data from source
Regards

HI,
In case you know the technical name of the PSA table, you can try to check in SE16 if data is available in the table.
Normally when psa is deleted only a logical deletion occurs i.e. a delete flag is set and when all the requests from the partition get deleted the data gets physically deleted.
Hence you can check and in case data is aailable in table you can download the same and use flat file to load it.
Hope it helps.
Regards,
Nitin

Each time master data full load removes previous data and load with new ?

We load company code (0COMP_CODE) master data (full load).
1st day, we check company code master data, the record count is 150, 2nd day, the record count is 90. It sounds like the master data full load each time would clean the previous data and load with new data, am I right? If what I guess is right, then what setup is controlling this?
Thanks

I dont think it does cleanup.
MD records in the new load simply overwrite the records already present in the master data.
I mean if same record comes again its overwritten.If new record it gets added.
I wouldnt expect number of records to reduce drastically from 150 to 90.
Maybe before MD activation records could be more(as there will be both M(modified) and A(active) records).
cheers,
Vishvesh

Can you remove XMP data from .eps files in Illustrator-CS5.5?

Background:
I'm using font software called Typetool 3 and Illustrator CS5.5.
I am using these on Windows 7, 64 bit.
This is entry level font software released by Fontlab.
This software accepts artwork through the .eps file format in both theory and practice.
However: it refuses illustrator CS5.5 .eps files.
When I looked at this I came up with two highly interesting things: First- CS5.5 illustrator files are roughly 13 times the size of CS5 files, of this type (a simple font glyph-comparing a 29-30 kbfile to a 420-450 kb file in cs5 and cs5.5 respectively).
Thing two came from looking at what that data was (by opening it in a text editor). It appears that some of the data XMP data, illustrators data for tracking things like who created the file, copyright, and other. In document info many of these fields were blank. I'm sure this isn't the only issue because my exported xmp data is 64 kb large, but it does account for a chunk of the file.
The main question being: Can this xmp data; which for my purposes is redundant, because I have to put copyright and other data in the font, be removed or not included at the point of document creation?
The technical question being:Can the file be saved in a manner which will allow it to be exported from adobe CS5.5 and imported into Typetool 3?
Things I've tried:
In saving .eps file: removing document headers, previews, color data, saving as different versions of the language. Basically saving it without all settings.
In saving .ai file: saving without any settings checked (without compression, pdf editting, ect.) and saving it to a different level of illustrator.
I do not know enough about postscript programming to navigate the file or remove the offending data. Nor do I have time to do this over multiple glyphs.
As a matter of opinion I do not like that my software is including potentially identifying information (which is one of the intents of XMP data, to provide identification) without notifying the creator, let alone allowing me to keep it from doing that. I would not mind or bother-except for the fact its messed up an established workflow. If someone editted this data without my knowledge, say with a virus or heaven forbid manually, it would be also be bothersome. Having a check that identifies that I am sending this data out would give me something to know if this situation was in fact happening. Additionally for a situation like mine-communication between programs in a closed environment where no other users are involved, its unnecessary and wasteful... like putting gold rims on what is intended to be an oxcart.
I'm planning on going to Fontlab for later this week, as it is as much thier issue as it is Adobe's. From what I know XMP is both a useful and popular technology- having a workaround for this situation seems like it would be a good idea. If necessary I can attach some working files for comparision.

I would save it as EPS (version Illustrator 3). This should be compatible to almost any software that takes EPS.

How can I remove safari data from shared iCloud account?

Before iOS 8 and family sharing I was using a single iCloud account shared among several Apple devices in my household. Now that we are all using our own separate Apple Accounts I want to delete shared data from other devices that were using my iCloud account. For example, my wife and I both have data synched with iCloud (the same account) for Safari. Now that her phone has been switched over to her own AppleID, I want to purge the data stored in my icloud account from her device. When I open Safari on my phone, I can see a list at the bottom of tabs that my wife had open on her phone at one time in the past. That list will never get updated now that she is using her own account. So how do I purge old data from other devices off my iCloud account?

If she's on a different account now, Safari data from the previous account should no longer be on her device. iCloud tabs, on the other hand, will persist from a device that is no longer sharing the account for 14 days, after which they are automatically cleared. (This is coming from iCloud, not from her device.) You might try waiting a couple of weeks and see if they aren't automatically removed.
If you're still concerned, you could always ask her to go to Settings>Safari and tap Clear History and Website Data. This won't clear her iCloud tabs from your device though; you'll have to wait for that.

How can I remove all data from the iPhoto app?

I wanted to reset my iPhoto library and remove all places, faces and events recognized from the pictures, so I copied my iPhoto library to a hard drive and then deleted it and emptied the trash. Copied the data to iPhoto again and took a look. The library was exactly the same. When I saw my activity monitor I realised there were just 12 gigabytes remaining in my hard drive (I'm using a 128GB Macbook Air) and before doing all this there were 47 gigabytes remaining. My iPhoto library is about 35GB, and I think I didn't replaced the library, I duplicated it. I'd really like to know if someone can help me finding the other library and deleting it, because I'm getting out of space in my mac.

Your post is not clear
I wanted to reset my iPhoto library and remove all places, faces and events recognized from the pictures, so I copied my iPhoto library to a hard drive and then deleted it and emptied the trash.
OK
Copied the data to iPhoto again and took a look.
Exactly what does this mean?
Probably your best bet is to run your iPhoto library on an external drive
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Can't remove AutoFill data

There are some user names that are stored in Safari's AutoFill that I want to remove, but I can't. When I highlight them and click "Remove," nothing at all happens. There are others, however, that I am able to remove. Any idea why some are stuck? Even clicking "Remove All" does nothing. I do have MobileMe set to sync my Keychains but I can't see why that would prevent me from removing these things from one computer and having it sync.

thanks, carolyn!
for the record, this isn't handled as elegantly as apple usually handles things. deletion should work in safari, regardless. most people are unaware of the keychain. if the feature exists in safari's preferences, it should work. period.
otherwise:
- we should be asked if we want the items also removed from the keychain; or
- we should be directed to the keychain.
no matter what, there shouldn't be buttons in safari's preferences that produce no result at all.
thanks again.

Can you remove Meta Data using Acrobat 7

Mac OSX
Acrobat 7.0
Hello,
Is this possible. If not is it available in another version?
Thanks

I think I found out how to do this. I would appreciate if someone could confirm the accuracy of this.
File > Document Properties > Descriptionl > Additional Metadata > Advanced
Select the data and click Delete, click OK.

The "write key" configuration file vi use of "trim string" prior to writing the data can modify any string data written.

I tried to use the config VIs to record some front-panel settings for later restoration, one of which could be a single space character (part of a string parsing system).
I soon discovered that whenever I tried to save that single-space value to an INI file, only a null string was saved.
After doing some digging I discovered that buried in the Write Key vi is a worker vi called Config Data Modify that uses Trim String on the string data before it is written to the file and that's what was eating my string character. I don't know whether this is a bug or a feature but there are at least three ways to fix it.
1) Assuming you want to leave the library VIs alone, you can pre-process any stings sent to "write key" to replace all spaces with "\20" and then post-process all strings read using "read key" to replace all instances of \20 with spaces.
and if you don't mind modifying the library VIs, either to save/use under a different name or to stick back into the library in a modified state (caution - can cause problems when you move code to another machine with an un-modified library) then...
2) You can yank the trim-string out of the Config Data Modify vi and hope that it does not have any undesirable side effects with regards to the other routines that use Config Data Modify (so far I have not found any in my limited testing)
or
3) You can modify the string pre-processing vi, Remove Unprintable Chars, to add the space character to the list of characters that get swapped out automatically.
Note that both option #1 (as suggested above) and option #3 will produce an INI file data entry that looks like key="\20Hello\20World\20" while option #2 produces an entry that looks like key=" Hello World "
The attached PDF contains screenshots of all this.
Attachments:
Binder1.pdf ‏2507 KB

Hi Warren,
there's a 4th option:
Simply set the "write raw string" input of the write key function to TRUE
This option only appears when a string is wired to that function!
Just re-checked:
I think it's a limitation of the config file format. It's text based and (leading) spaces in the value are "overseen" as whitespaces. So your next option would be to use quotes around your string with spaces...
Message Edited by GerdW on 05-02-2009 08:32 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Whether Shopping cart delivery date can be in past date!!

Hello SRM Gurus,
There is a requirement from my customer, it may be strange.
The requirement is : Shopping cart (requestor) should be abe to save having delivery date as a past date and PO in SRM with same past date.
Is there any BADI available or programming is required?
Pls post your sugesstions.
Regards
Madhan

i think you can do this config . 584 message ready made available for you as E . now you can turn to W
and do lot of testing for entire procurement cycle.
.. it may give some trouble approval time too. check it up
IMG activity 'Influence Message Control' (Enterprise Buyer -> Cross-Application Basic Settings -> Message Control):
Select the line with business object BUS2121 and double-clicking on 'Message Control'.
                    Message cl:   BBP_PD
                    No. :          584
                    Text:         W
Save the new entry.

Reinstall Data Warehouse to remove test data

We are wanting to go live with SCSM soon, hopefully in a couple of weeks.
Unfortunately, we don't have the infrastructure in which I was able to setup a test and production environment. I've managed to remove the test data out of the ServiceManager database via the SMLets, but we are wanting to remove the test data out of the
data warehouse as well. I've attempting manually deleting from the database (I know unsupported), though this did not work and just gave many database errors (as expected).
What I'm wondering is if it's possible to uninstall/reinstall the DW. Upon reinstall, I know I would need to likely re-register it with SCSM.
In doing this, will all of the custom classifications/statuses/templates/etc stay in place?
Once installed, would all of the sync jobs pick up as expected and sync the current data in the Service Manager (No incidents/Changes/etc) to the DW?
We have all databases/Service Manager/Portal running on one server. DW running on a 2nd server.
If anyone could provide some insight around this, it would be much appreciated. Any direction towards documentation would also be great!
Thanks

The best scenario (and my recomendation) would be to export and take backup of all your management packs, reinstall the entire Service Manager environment and import them again. In that way you should be able to get a fresh, functional Service
Manager and all your settings would be retained.
However, to answer your question, you would need to:
- Unregister with SCSM DW
- Uninstall DW
- Delete the three DW databases
- Install DW
- Register with DW
This would not affect any settings in your SCSM environment and you would have an empty DW.
Regards
//Anders
Anders Asp | Lumagate | www.lumagate.com | Sweden

ESS Family Data - can't remove field Date of Birth

Similar Messages

Maybe you are looking for