ESS-Hide field for a specific Subtype

Hello,
I am on EP7.0 ERP05 NW04s and trying to modify the Bank Informations page for ESS. What I want is to display Dollar Amount field on the Banks Overview page for Other Banks...but when I try to add that field in the Bizcards overview page ,it shows up for both Main Bank and Other Banks ,...
therefore I want that this field should be hidden for Main Banks and displayed only for Other Banks..
Any help would be highly appreciated.

Hi everyone, Issue resolved
BADI: CUSTOMER_ADD_DATA
Method: CHECK_ALL_DATA
While saving, this method will be hit. We need to check for KNA1-KTOKD = ‘XXXX’, if yes, then check if KNA1-KATR3 is blank.
If it is blank, then display the error message ‘Attribute 3 has to be maintained for XXXX in Additional Data’

Similar Messages

Hide field for " Change Number". RMMG1-AENNR " in MMR

Hi,
In MM01 and MM02, i want to hide field for " Change Number".
I tried in OMSR and OMS9, but i could not find field "RMMG1-AENNR".
Hw to make it hidden.
Uts
Edited by: Utsav.agra on Jun 1, 2009 9:17 AM

Check is your problem can be solved by Screen or transaction configuration?
T Code is SHD0

Hide field for applications of ESS

Dear Experts.
We have several type of employees in the company. Employees A1 and A2. The company want that for the employees A1 the portal display all the fields for the service of Address, but for the employees A2 the portal hide two fields in the service of Address.
How can do this?
Regards
Carmen

Hi Bala.
I differentiate these employees by the filed Employee Group(P0001-PERSG).
When you says create two applications, Is do the that suggestion Stuart:
"Ctrl and Right Mouse Button (WD Personalization) , This is user level personalization "
Or When you say create two applications is modify the applications using WD Java ?
The applications are the following for Mexico(MX):
Personnal Information ===>
                                           Address] Address
                                           Bank Information] Bank Information
                                           Document: Personal Data] Personal Data
Best Regards.
Carmen

Hide fields for IT0006 is not working correctly

Hello all,
I am trying to hide following fields in IT0006 for poland.
P0006-TELNR
P0006-ENTKM
P0006-WKWNG
P0006-BUSRT
P0006-ENTK2
P0006-HSNMR
P0006-POSTA
I have set up feature p0006 properly iand selected right buttons in T588M.
There is no alternative screen (2046) available for poland. User parameters are also correct for MOLGA and UGR.
However, when i go to PA20 or PA30, the above fields still appear on the infotype screen.
When i do same settings for another country, the screen is hiding these fields ( for example China).
Can you please guide ?
Thanks in advance
JG
Edited by: joy gomez on Apr 26, 2010 7:04 PM

Hello Joy, Please check the module pool you are using is correct one and the return value of the feature P0006 is maintained in the table t558m. I had the same issue with poland infotype. We afterwords took help of abaper - abaper hided it by screen painter - licence key is required for that.
Jaydeep
and p0006 not only saved but activated
Edited by: Jaysaphr on Apr 27, 2010 6:39 AM

Reading T588M hide fields for MOLGA/feature/variable key & HIDE custom flds

Hi
    I have requirement to read hide fields from T588M . As we can hide filed in T588m and we already have written a program in which it called certain feature from PE03 for IT0002 and hide the filed based on the user authorization . Now I have introduce another field which some how the same as in SAP standard screen , for some good reason and according to business process it was not full filling the requirements . So I introduce another field. Now what we want in PBO of IT enhancement it stop certain users to see that fields using feature ( Tr.Pe03 Feature p0002 ) . In feature we have programmed that it call our customized program and check the authorization as mention earlier .
Herere my questions
-     Do you guys have any other good option to control that?
-     If some how I manage to read feature using FM HR_FEATURE_BACKFIELD in PBO
-      After reading feature I am accessing the table T588m to make sure for certain feature which field is hide or not as in table T588m I can see the fields like +-, , how can I make sure which field is refer to what I also find the FMS
-      HRPAD00SCREENCONTROL
-      HR_READ_T588M_WITH_PME04
-      HR_T588M_CUSTOMIZING
-      HR_T588M_GET_DYNPRO
-      HR_T588M_GET_FIELDATTRIBUTES
-      HR_T588M_SAVE
-     But the above Fm also not fulfilling my requirement. As I was thinking that I read the fields , SAY if standard field is hide in the feature , I can loop at my screen and hide the custom field which I enhanced in IT0002.
Right now Im debugging the standard code how its reads the T558M , and I got some clue .. But it looks like long path I mean reading some screen fields.. Include program is L0PXVF01.
Now my question is do you guys have any good solution, it might possible Im doing it using the short path .. ( Cuz I wna use my security program as its using feature )
Let me know if u have some idea
Thanks
Saquib Khan

1- Well Im thinking that I have to compare T558M on the base of Feature and variable key . And see that standard field is hidden... if it is .. I want to also HIDE my custom field ....
2- For our feature "p0002" , we have developed a custom code in which on the basis of variable key and user profile it get executed and also see wther that person has authorization to see that standard field or not . if say that person doesnt have authorization for that field I can also hide mine custom field.
I just got the test login and Im going to test it by add/removing security roles .
<b>
I tried that out but if Im looping at screen , its behaving same for both users . Cuz there is nothing which tells ok for this user fild is hidden in T558m and its open for other one..
Also, is there any FM if I pass Dynpro # , molga and variable key , it return me T588M hidden fields ...
I already tried the above FM
This looks like to work but not working for field
HR_T588M_GET_FIELDATTRIBUTES</b>
Thanks for valuable input!!
Saquib

HIDE AREAS FOR COUNTRY SPECIFIC ESS

Dear Expert.
I have the following issue.
In the company we have employees in several country. For one of this country some Areas ie. Career and Job will be not enabled.
I found issue similar and a solution in the following post:
[Applications of ESS |Applications of ESS]
In the previus post:
Bala Suggests
Do an implicit enhancement in this Fm HRXSS_SER_GETMENUDATA to hide the area for a particular country
Tiberiu Sasu Suggests:
You create two overview area group pages in the backend: ZAreaA and ZAreaB. ZAreaB does not contain the service link to Travel and Expenses
in roleA you configure the iView "Overview" to point to ZAreaA
in roleB you configure the iView "Overview" to point to ZAreaB
The question is:
If I use the option of Tiberiu, when the Basis Team do an update for the Business Package of ESS, we hot can have this update. ??
What is a best practice for solve this issue, having in count the SAP guidelines?
Thank in advance for your help.
Best Regards
Carmen

Hi,
I'd strongly agree with Bala.
The enhancement is relatively simple - I've done the same thing for several systems.
I have found, however, that the best way to drive the enhancement is by reading the user's security roles. This way access to the area can be granted/removed by the same process that grants access to any/every part of the system.
- Chris

Hide fields for activities when they are opened via Activity Monitor

Hi,
In CRM 5.0, my requirement was to hide a number of fields from activity display via transaction CRMD_ORDER & CIC0 (SAPGUI based transactions). I achieved it by using screen variant. I assigned my screen variant to different transactions (CRMD_ORDER, CIC0 etc.), and things were working fine.
But when I open activity monitoring report (transaction S_AE2_89000019), search for some activities and open an activity by double-clicking in the report, the hidden fields become visible. Although, the transaction being displayed in CRMD_ORDER.
I couldn't enable my transaction variant for transaction S_AE2_89000019, obviously because this is a report transaction which in turn opens activity when we double-click on the grid.
Any idea how to avoid these hidden fields being displayed via S_AE2_89000019?
Regards,
Kaushal

Hey Kaushal,
Let me first inform you the following:
1) Transaction Variant are associatated to Dialog transactions only......Which means when u call report which eventually refers the same transaction even then the transaction variants is not called....
For the whole transaction variant to workout, you need CALL transaction " ..."....
2) The transaction S_AE2_89000019 is not a dialog transaction, its a parameter transaction which eventually calls a report AQZZ/SAPQUERY/SMCRM_REP_ACT1==
3)This report in turn uses the call to FM CRM_1O_CALL_FOREIGN which launches that crmd_order transaction screen and not crmd_order transaction..
You can enchance that report by creating a z report and inside that z report you can fulfill your requirement..
Inspire ppl by reqwarding..
Regards,
Anand...

Hide Fields for Applications WD ABAP Travel

Dear Experts.
I have the following doubt:
Is posible hide the fields enclosed in the box red using configuration of the following image for the application WD ABAP (Change Travel Request):
[Image|http://img513.imageshack.us/img513/1859/hidefields.png]
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITE_UI_SUMMARY
Window Information: AMOUNTS
View Information: AMOUNTSVIEW2
Configuration ID: F3C03EF7AE5E8F48A716EECAFD7E99BD
I tested using personalization (Ctrl + Right Clic), but this hide the label Total Travel Expenses, but not hide the values 0,00 USD and 560.000,00 COP.
I created a Implementing Enhancements in the View, delete the Element, but this not work and display message of error. I checked the following information of help:
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
And undo the element deleted
Someone have a suggestion for solve my issue?
Regards

Dear Expert.
The method CREATE_AMOUNT_UI have three methods:
me->add_currency_uielement(
iv_attributevisibility = l_attributevisibility
io_container = io_container
iv_currency = iv_currency
iv_design = l_design
iv_id = l_id
iv_indextoinsert = l_indextoinsert
iv_color = l_color
CLEAR l_id.
CONCATENATE l_idprefix 'amount' INTO l_id.
me->add_amount_uielement(
iv_id = l_id
io_container = io_container
iv_indextoinsert = l_indextoinsert
iv_attributevisibility = l_attributevisibility
* iv_amount = l_amount "MAHN1310083
iv_amount = lv_formatted_amount "MAHN1310083
iv_design = l_design
iv_color = l_color
CLEAR l_id.
CONCATENATE l_idprefix 'minus' INTO l_id.
wd_this->add_minus_uielement(
iv_id = l_id
io_container = io_container
iv_indextoinsert = l_indextoinsert
iv_attributevisibility = l_attributevisibility
iv_show = iv_minus
iv_design = l_design
iv_color = l_color
ENDMETHOD.
In runtime I did clear the value of the fields l_id and L_ATTRIBUTEVISIBILIT = VISIBILITY.TRIP_TOTAL.
But the system follow showing the field Total Travel Expense.
I want know what is the attribute that I should change for not display this label and value/?
Thank in advance
Regards
Carmen Guerrero

Error in ESS Mandatory field for Address(0006) Sub type 1

Hi Experts ,
       I configured certain fields as mandatory fields in the tables V_T588MFPROPC & V_T588MFPROPS for Address(0006) sub type 1. It is working fine in my development system and quality system . The same configuration is moved to production , it showing the error "fill all required fields" . Aprat from th V_T588MFPROPC & V_T588MFPROPS any other table to configure for mandatory filed.
with regards
Renjith

Hi Renjith ,
Kindly check the below,
1. check the badi implementation of HRXSS_PER_BEGDA
2. Check whether the note 1044777 is implemented in system
     1044777 -   Inconsistency in date handling of ESS PersInfo
3. Also this may be because of back end data also, try to create a new set of data with all the required fields and try to   edit     the same in portal because most of this issue may occur because of data.
Regards,
Meera

How do I change the text of a specific MESSAGE field for a specific Alert

I want to change the text for the "Message" field (10.2.0.5 OEMGC) for the "Blocking Session Count" alert that shows up in Notifications.
Does anyone know where the text is stored? I do not find it in Preferences>Rules in the Console nor in any obvious views or tables in the OMS.

What is the Agent version monitoring the Database for which this alert is raised?
You need to apply the fix for Bug : 9110313 to the Agent on the database machine.
Refer to Note 9110313.8: Bug 9110313 - Metric clear alerts reported when warning and critical threshold are crossed

How to restrict the search help given to a field for a specific program ??

Hi,
I have one search help which is attached to a field.
This seach help is using a Z table and showing values perfectly for one program where I attached earlier.
The same fields and Z table I am using is some other related program where user wants to see the restricted values only.
I am not getting, how a search help can be restricted.
I try to take a example of it.
If in first program the search help values are:
Material           Level
Orange              1
Mango               2
Grapes              3
Now in the second program user wants to see only levels not the material. I Have given only two colums for understanding purposes not all .
Please suggest what are the possible ways we can do it.
Thanks right now.
-=Maddu=-

Hi,
Use this event
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_cc.
PERFORM company_code CHANGING p_cc.
FORM company_code CHANGING p_cc.
DATA: dynpfld_mapping LIKE dselc OCCURS 0 WITH HEADER LINE.
REFRESH gt_bukrs.
SELECT * FROM t001
INTO CORRESPONDING FIELDS OF TABLE gt_bukrs.
LOOP AT gt_bukrs.
**ST AS ON 08.09.2006
    AUTHORITY-CHECK OBJECT 'ZREP_TMF'
          ID 'BUKRS' FIELD gt_bukrs-bukrs
          ID 'VKORG' FIELD gt_bukrs-bukrs
          ID 'VKBUR' DUMMY
          ID 'SPART' DUMMY
          ID 'VTWEG' DUMMY.
   AUTHORITY-CHECK OBJECT 'ZREM_ORG'
         ID 'VKORG' FIELD gt_bukrs-bukrs
         ID 'VKBUR' DUMMY
         ID 'SPART' DUMMY
         ID 'VTWEG' DUMMY.
**ST AS ON 08.09.2006
    IF sy-subrc NE 0.
      DELETE gt_bukrs.
    ENDIF.
ENDLOOP.
dynpfld_mapping-fldname   = 'BUKRS'.
dynpfld_mapping-dyfldname = 'BUKRS'.
APPEND dynpfld_mapping.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = 'ZREM_AGENCY_REPORT'
      dynpnr          = '1000'
      dynprofield     = 'COMPANY'
      value_org       = 'S'
    TABLES
      value_tab       = gt_bukrs
      return_tab      = return_tab
      dynpfld_mapping = dynpfld_mapping.
ENDFORM.                    " sale_org
Reward points

Count of fields for a specific date

Hi.
I have a report that is running on parameter field of date range. I have the report grouped by that same date range. The dates showing up on my report are payroll dates. So since there are two payrolls in one month I see both. For example:
5/8
5/18
I then have another group below the above date for "Type" of check "amount" and "count". So the report looks something like this when I run it:
5/8
Type#1      $5000.00               / 100 people
Type #2 -   $6000.00              / 85 people
5/18
Type#1       $5300              /102 people
Type#2       $6600             /60 people
Grand Total:                     $22900
So far, everything works great and this is all good.
I now want to add two fields to the report (without changing my main report data (above) and since the fields are from the same table, I created a subreport for each field. I have an "added to payroll date" and a "taken off payroll date" field. And since I just want a count per payroll date of the number of people added/taken away, I created a subreport for each date (they exist in the same table).
I linked the subreports to the main report by checkdate since that is what it is grouped on... and I did a "count" formula to provide me with the count of people. (I also added a group to the subreports so the records are grouped by checkdate.
The total number for MAY is correct, but it is not putting the correct # of added and taken off in the respective check date?
Confused yet?
Its doing this:
5/8             added 50 / taken away 60
Type#1      $5000.00               / 100 people
Type #2 -   $6000.00              / 85 people
5/18         added 100/taken away 20
Type#1       $5300              /102 people
Type#2       $6600             /60 people
Grand Total:                     $22900
The total # of Added "150" in this example is correct, but it is distributed incorrectly... same for the taken away. What am I doing wrong?
Also, can anyone think of another way of doing this outside of the two subreports I just created since my report runs really really slow now?
Your help is much appreciated
Thanks
Using Crystal-8

Please re-post if this is still an issue

How can I avoid displaying specific extended field from a specific template

Hi,
I have created two extended field in Rfx page . I have 6 Rfx templates . These two extended fields are appearing in all the 6 templates . I want to display the extended fields for some specific templates . How can I do it ?
Best Regards
Swastik

Hi Swastik,
Your requirement is very much possible by Page Customization.
In Page Customization when you add the field for Hidden = yes
there are more attributes : Dimension Field , Dimension Field Type, Dimension Value
In this put
Dimension Field = DISPLAY_NAME
Dimension Field Type = Object Referance
Dimension Value = click search help to select your template.
Create this for each and every Template you reqiure to Hide the field.
Hope this solves your case.
Regards,
Vaibhav

How to hide fields in Infotype 16 for Molga 28

Hi Guys,
I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
Regards,
Navneet

Hi Harish,
I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
"EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
Regards,
Navneet

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

ESS-Hide field for a specific Subtype

Similar Messages

Maybe you are looking for