ESS IView access to ERP - login page displayed and not access possible
Hello Colleagues,
we have to setup Employee Self-Service (ESS) Portal as well ERP.
All required steps seems to be performed but we still facing one access issue.
If I try to enter the Link My Employees under SAP Portal > Employess Self-Service > Travel and Expenses it get an web login (ITS) from the ERP system and not direct access to the service. In addition I am not able to login with defined user an password.
If I try the to enter the service directly (test service) at transaction SICF on the ERP (ECC) System itself it works fine as well with defined user and password.
If both IE Browser Windows are open, then I am able to see the service (empty table) unter My Employees at portal after click again under Link SAP Portal > Employess Self-Service > Travel and Expenses > My Employees.
So I think the general connectivity works fine but some thing still wrong with maybe IView access/permissions/roles?
Any Ideas?
Many thanks in advance!
Regards,
Jochen
This means that your Single sign on is not working correctly.
Things to check:
1. From Portal System Administration - for the system object created for connecting to the backend system - try to perform the connection tests and make sure they pass.
2. Access your portal with a Fully Qualified Domain Name (for example: myportal..mysubdomain.mydomain:port/irj/portal instead of just myportal:port/irj/portal) - this should most likely resolve your issue - since you see the error only for WD4A applications.
3. Make sure that the host name you have configured in the portal system and the host name with which you access your portal are in the same domain.
Also, check the SSO related profile parameters in the backend system:
login/accept_sso2_ticket=1
login/accept_sso2_ticket=0
login/password_change_for_SSO=0
Thanks,
Shanti
Similar Messages
-
Limit access to Apex login page
Hi,
We are deploying an application to our users. I need to limit access to Apex login page f?p=4550 to some predefined Ip adresses. Any ideas on this?
Best regards,
Onur.How exactly the APEX engine forces a '404' to be returned, I am not entirely sure. Perhaps it sends back the Response with the Header Status set to 404 ?Yes, with this process on the login page.
begin
if not #OWNER#.wwv_flow_security.ip_check then
#OWNER#.wwv_flow.g_unrecoverable_error := true;
sys.owa_util.status_line(404, 'Page Not Found');
sys.owa_util.http_header_close;
end if;
end;Scott -
Cant access router's login page
my macbook cant access the router's login page,but i cant access the internet through this wifi
here is some info i think may be useful
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 80:e6:50:00:a0:c6
inet6 fe80::82e6:50ff:fe00:a0c6%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:20
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:21
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 82:e6:50:00:cc:00
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 5 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 6 priority 0 path cost 0
nd6 options=1<PERFORMNUD>
media: <unknown type>
status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 02:e6:50:00:a0:c6
media: autoselect
status: inactive
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.2.1 UGSc 28 0 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 34 2643545 lo0
169.254 link#4 UCS 1 0 en0
169.254.71.63 74:2f:68:73:6d:e UHLSW 0 0 en0 281
192.168.2 link#4 UCS 2 0 en0
192.168.2.1 94:c:6d:30:49:de UHLWIir 29 178 en0 1029
192.168.2.101 localhost UHS 0 0 lo0
192.168.2.102 74:2f:68:73:6d:e UHLWI 0 0 en0 290
If some people cant help I'll really appreciate.What I did was a hard reset... (hold reset for 10 or 30 seconds then while holding, unplug unit then release reset button. After 10 more seconds, plug unit back in.)
Between that and using the TFTP program, I was able to get back into my management screen. You will have to reconfigure your router after that. Be sure, if you have a dedicated ip on your computer, you temporarily set it to obtain everything automatically incase your set ip doesnt correspond to the default settings for your router. Then once everything is back up, you can change you ip settings on your PC back to what you had, if any. -
When I access my website by cellphone, my desktop design format is displayed, and not the cellphone format which I designed. What can I do?
Hi
In Muse, go to File menu-> Site properties, select Phone layout and make sure the option in given screenshot is checked,
Do let me know if you have any question. -
Website page displays and javascript runs correctly in IE8 but not in Firefox 3.6.10
website page displays and javascript runs correctly in IE8 but not in Firefox 3.6.10
Can you post a link?
Then we can take a look. -
How can I have a Pages document that is shared with me under my Pages section and not open it with the link?
Try this.
Open the document and select and copy a few pages, say ten pages.
Open a new blank document and paste the pages you copied into that.
Save it with a new name.
Work on those new pages to see if the problem has disappeared.
If this helps, continue breaking up the large file in to smaller chunks and working on them
You can of course later reverse the process and merge the files into one new one.
This suggestion is based on my experiences with large Word files. Breaking it up in to smaller chunks does two things. First, if there is any corruption in the old file, the new copies might escape that. Second, the Mac is faster handling the smaller chunks. -
My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again.
Hey Charyasmin,
Thanks for the question, and great troubleshooting so far. You’ve definitely taken the proper first steps. To continue to troubleshoot, the following articles may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M. -
I am trying to change my password, but not remember the security questions and not access recovery email. Please give me a solution.Ana Maria Cappatto Simoes/ F. 11.50414433
Welcome to the Apple Community.
1. Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
2. If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
3. If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
I recently gave my old mac air (purchased new 2011) to my friend. I want to change the mail settings so that he can access his mail from the application and not mine. So far we have gone to mail then preferences then general and changed the email address to his but upon relaunching the mail application, it didn't seem to have worked. The mailbox was empty of either his or my emails. Ali
Follow these instructions: What to do before selling or giving away your Mac.
Your friend will need to install his own OS X system as weill as purchase his own App Store software. He/She cannot use yours. Since the machine has been wiped your friend can configure his/her own Mail account. -
Why is E on display and not 3G?
Why is E on the display and not 3G?
If resetting the network settings, then it's because you're out of the 3G coverage zone or 3G is down in your area. Check to make sure you are in a 3G coverage area and if you should be, contact your carrier to see if there is a problem.
-
Not able to access the portal login page and idenetity console page
Hi all.
I installed PS 6.1 on a new Solaris 8 Box. DNS is not configured for this box.
I use netscape browser on the solaris boz to test my installation - everything is fine
issue:
When i tried to access the amconsole or amserver/UI/Login application, it bombs with the following exception.
but i can see the default webserver page (or any static html for that matter).
any clue?
10/28/2003 03:22:22:776 PM EET: Thread[Thread-195,5,main]
ERROR: Exception occured
java.lang.Exception: Service URL not found:session
at com.iplanet.services.naming.WebtopNaming.getServiceURL(WebtopNaming.java:180)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:686)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:668)
at com.iplanet.dpro.session.Session.getSession(Session.java:540)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:73)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:280)
at com.sun.identity.authentication.service.AuthUtils.getOrigLoginURL(AuthUtils.java:1546)
at com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:253)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:783)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:434)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:312)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:282)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)I am facing the same problem. I am using Custom Authentication module. When I access the login page for this custom authentication module I got this error. I have DNS entry and added the IP Adress in the host file too. Anyone tell us, what could be the problem?
-
Am not able to get the Access manager 7- login page
I have installed Access Manager and configured it was worked. but i did the Policy agent cofiguration for Access Manager after that i couldn't login to Access manager ie /amserver while on trying http://localhost:8080/amserver/UI/Login
am getting the following error
exception
javax.servlet.ServletException
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:300)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
java.security.AccessController.doPrivileged(Native Method)
com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
root cause
java.lang.NoClassDefFoundError
com.sun.identity.authentication.server.AuthContextLocal.(AuthContextLocal.java:140)
com.sun.identity.authentication.service.LoginState.createAuthContext(LoginState.java:1121)
com.sun.identity.authentication.service.AuthUtils.getAuthContext(AuthUtils.java:310)
com.sun.identity.authentication.service.AuthUtils.getAuthContext(AuthUtils.java:250)
com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:325)
com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:981)
com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
sun.reflect.GeneratedMethodAccessor115.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
java.security.AccessController.doPrivileged(Native Method)
com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
please any do some need full to solve this problem
regards
vimalraj.sGuys,
This is a common problem that I have noticed when policy agent is installed on the same DAS (Domain Admin Server of Sun java Application Server) instance where access manager is installed.
Best solution is to deploy your application on a different DAS and configure / install policy agent for the new DAS.
If web server is used for Access Manager, Deploy your application on a different instance.
Alternatively, follow these instructions.
Assume that you have policy agent binary installed on /opt/SUNWam/policyagent/ j2ee_agents/am_as81_agent.
When policy agent is configured, it creates a new configuration folder named agent_001.
1. Login to DAS and remove the class path changes done by the policy agent installer.
These are the class path to remove:
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/agent.jar
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/amclientsdk.jar
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/locale
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/agent_001/config
2. Add these to the class path to the end of the class path suffix. NOT AT THE START
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/agent.jar
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/locale
3. Insert amclientsdk.jar to the classpath. Insert this before agent.jar but after am_*.jar files (am_sdk.jar,am_services.jar,am_sso_provider.jar,am_logging.jar )
4. open amConfig.properties . Add this line to the bottom of the file.
com.sun.identity.agents.config.location=/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/agent_001/config/AMAgent.properties
Above line points to the policy agent configuration file.
5. last but not the least:
a. Make sure that an agent is created in Access manager with the same name and password as the one that you gave when installing policy agent.
b. Set property com.sun.identity.agents.config.filter.mode = SSO_ONLY in AMAgent.properties. This will help initial testing of the configuration.
c. Above configuration is for Unix. But shouldwork for other OS as well.
Best of Luck
KK -
Create a login page that does not link to database
Hi,
I am really new to muse and would like to seek some help....sorry if any similar questions have been asked.
I am making a website interface for my assignment, and i need to create a login page,
how can i make a text box for entering the login ID and the password? and how can i add a login button?
By the way, this does not have to link to a database, it is just a template........so the solution using codes may not help i guessHi,
check this thread Re: Can I create a login/password protection in Muse for a HTML5 page or two? -
Exchange 2010 OWA login page customization does not work
Where can I post a question regarding Exchange 2010 OWA login page customization? The customization worked before running updates, now all users navigating to the OWA page see the default configuration.
Hello,
You should ask in the
Exchange Previous Versions - Administration, Monitoring, and Performance forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Reader 11 Page display will not stay on "view single page"
Hello,
Running Windows 7 x64 Reader 11.0.0. When opening any pdf document it opens with page display on enable scrolling. I want it to always open on view single page.
Under Edit -> Preferences -> Page Display the Page Layout is set to single page and Zoom to fit page.
Any idea what i'm doing wrong? Pretty sure that is how i have had it set since Reader version 2 or so.
Thank you,
Mg.Until Mozilla straightens this out, you can go to:
Tools > Options > Security > Unclick "Block reported web forgeries"
That should give you relief
Maybe you are looking for
-
Can you tell which device downloaded a purchase from the App Store?
When you have multiple devices using the same AppleID, is there a way to tell which device downloaded a particlar song or in-app purchase? If so, can you please tell me the steps. Thank you
-
Clarification on the GSS-TSIG supported zone transfer in MS-DNS.
I have one clarification on the GSS-TSIG supported zone transfer in MS-DNS. I tried the following scenario in zone transfer, Configure my DNS server(supports GSS-TSIG algorithm for Zone transfer) as primary for a zone 'test.com' Configure MS-DNS as
-
Best way to change the actual physical dimensions of an avi file?
Hey all, So I'm trying to figure something out, and it seems like it SHOULD be a simple thing... but I haven't been able to find the answer. I'm importing an avi file (from Poser 9) into AE 5.5. The dimensions are 1200x900. There need to be 48 copies
-
How to fetch table_names along with the result
Hi all, I want to find strucural differences between two kinds of tables . One is original table and another one is archival table . All archival table names will have different name from original tables. Please tell me how to get table name in the b
-
video is not working - can listen to you tube but not see video content any suggestions?