ESS Java Iviews vs. SAP GUI for HTML Templates

Hi
We are currently implementing ESS in 4.6c using ITS. We are planning on using the standard delivered ESS services and some custom iviews. We are planning on creating the custom iviews in Java as we can re-use when we upgrade to WAS6.4.
Can we use both Java iviews via a JCo (similar to MSS)and the standard delivered ESS services using ITS ?
Do we need create internet services for the Java iviews that will connect with R/3 thru Jco ( Is it the same as SAP GUI for Java)?

Just got of a project where we implemented ESS/MSS on R/3 4.6 using custom iViews in JAVA. Basically we developed one iView template that can be configured using attributes for different services. Each service can be used for ESS and MSS. This decreases frontend development work quit a lot because for most new services you only need to develop RFC's and then configure the iView to use those RFC's and the metadata.
Depending on you timeline you will either need one frontend and one backend resource. You can use one resource if that person knows JAVA and ABAP but it will take longer to finish the service or you can have multiple resources if your timeline requires to have multiple services finished at the same time. You can mail me directly if you have more questions: [email protected]

Similar Messages

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Which role that Take a iview use SAP GUI for HTML need ?

hi all
    i made a transaction iview use the sap gui for html,and this ivew add a role,the role add a user.and the user had only this role.when i use the user logon the portal,it will give me a error message:
portal runtime error....
   whether it need another necessary role?
   and when i take the user to mapping user.i can't found any system that i had configration.
    but i can do all use admin user .
   what i can do?

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Problem with SAP GUI for HTML

Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
Basha

Hi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya

Launch Approval Appraisal Documents in Iview format not SAP GUI for HTML

Hi,
Sorry iam not sure whether this is the right place to post this question.
I have a requirement where i need to change the appearance of UWL tasks related to appraisal approval.
Whenever a user clicks on approve apraisal tasks it is popping SAP GUI for HTML and taking to the backend showing Performance appraisal display.Our client are in need of normal iview rather than sap view( sap gui view).
I have identified the tasks related to approval appraisal.The tasks in the backend are
approval appraisal - perf appraisal - ts91000005, URL generation - ts12300108 , Submitted obj - WS 91000003.
i have created an iview based on http://xxx.xxxx:8000/sap/bc/bsp/sap/hap_document/documents_todo.htm?sap-client=xxx&sap-user=xxxx&sap-language=E
i have given the ID and iview PCD link in SWFVISU.Reregistered UWL again and logged in as a test user.When clicked on Appraisal approval i can see the appraisals completed.It wont allow us to edit.All hap_documents are BSP pages.
I guess i did something wrong.
i have followed these links.
http://wiki.sdn.sap.com/wiki/display/ERPHCM/PMSworkflowsin+UWL
Error: Launch appraisal Workitems in UWL in Portal...
Appraisal approval after completion not possible in BSP
Please let me know the procedure to show the approval items in a normal iview format.
Thanks in advance.
Chakri.

Chakri,
You will probably have to change the XML being used in your UWL. Go into the ItemType portion for the PM task and check/set the following properties
connector="WebFlowConnector"
defaultAction="launchIView"
Check if your Action tags within the ItemTypes have the following properties
name="launchIView" handler="SAPAppLauncher"
Check whether the Property within Action tags is linked to your BSP view that you want to trigger when the task is clicked
For e.g. <Property name="SAPIntegrator" value="ROLES://portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/....."/>
Once you change your XML dont forget to re-register your ItemTypes to the connector you are using.
Good luck
Pooja

Image not displaying properly for SAP GUI for HTML transaction iview

Hi,
We have a sap gui for HTML iview for transaction REORRR in portal. After giving enough inputs this leads to Business Document Navigator screen(part of Document management) where i need to display a document(.jpg image in this scenario). When i double click on the image it is opening on the right side of the screen but in a compressed format where in we need to scroll down to see the image. But i would require the image to display with out scroll bar or in a new window.
When i change the format of the iview as SAP GUI for Windows the image is opening in a new window.
I would like to know whether there is any configaration settings either in portal or in Document management side. or is this any limitation of the SAP GUI for HTML scenario.
regards
Bharat.

Hi,
You can open this iview in a new window make the setting in the iview properties that will allow the iview to be opend in a new window.
Regards,
Vamshi.

How to hide the menu bar from a Transaction iView (SAP GUI for HTML).

Hello all,
I have created a simple SAP Transaction iView of type SAP GUI for HTML. This iView has the Menu bar that has the buttons: Menu, Back, Cancel, and System. My requirement is, I dont want to see the menu bar that has these buttons. How do I go about it? Please advice.
Note: My iView is a SAP Transaction iView and not IAC service related iView.
Thanks
Vicky R.

You'll want to set the parameter ~webgui_simple_toolbar in your webgui service.
It is a binary parameter with the following values/options:
0 : Hiding the page header completely (not recommended)
1 : Standard setting
This is the recommended standard setting in which the title and the menu bar below it with the [Exit] and [Help] button and the application buttons are displayed.
2 : Displaying the title line
4 : Displaying the buttons [Exit] and [Help]
8 : Displaying the active system buttons on the screen ([Back] and [Cancel])
16 : Displaying the system menu
32 : Displaying the application buttons
128 : Deactivating the information block in the status bar (new)

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

Transaction iView - SAP GUI for HTML-blank on some systems

Hi,
I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be?
Thanks and Regards,
Reena

Hi Reena,
Have a look at the product availability matrix:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
IE 7.0 may have some problems if using it with ITS. Ensure that IE are all on the same version (6.0 for example) and the same service pack. We have everyone using IE 6.0.2800.1106 and it works fine now.
Regards,
Nick.

Transaction Iview - SAP GUI for HTML

Hi,
In SAP transaction iviews - SAP GUI for HTML in portal there is a possibility to go to menu,other transactions from the transaction field.Is there any way to remove the Menu button and hide the transaction field from transaction iview.
Please suggest.
Thanks,
Rajani

Hi Rajani,
Transaction iview which will control the menu,cancel buttons in SAP GUI for HTML
the url provided by Damian contain the solution for your requirement.
If you are looking somthing different then pls explain the requirement
Just let us know which specifiy buttons you want to show in transcation IVEW.
Thanks,
Anil

Problem With SAP GUI for HTML iView

Hi All,
I have created a transaction iView(SAP GUI for HTML) for the T code SE12, when I view the iview, it get loaded for the first time and if I log out and when i again login to the portal and view the transaction iview it is not getting loaded. If I clear the cache(By pressing Ctrl+F5) the same iview get loaded.
Could any one help me in solving this problem
Regards
Sivaprasath

Hi Shiva,
For SAP transaction iViews better to use SAP GUi for Windows option instead of SAP GUI for HTML.
Hope it helps for you..
Cheers
Phani

Connect to SAP R/3 using SAP GUI for HTML through saprouter

Hello,
I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string, but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
Thanks in advance.

thanks, I can get the data from SAP R/3 to crystal report.
but still dont know how to do the second question mentioned in previous message:
once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted.

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Change standard SAP GUI for HTML theme to portal theme

Dear Experts,
I have created transaction code for SAP GUI HTML for a custom report program developed in SE38.
We have created a URL iView in Websphere enterprise portal. The Transaction executing well and there are no issues.
But the SAP GUI HTML uses SAP Standard theme. I wanted to change the input field background color which is similar to our portal theme.
Please let me know , how to change the theme of the standard SAP GUI for HTML.
Thanks in advance.
any solution will be greatly appreciated.
Best regards,
Prabhu

Hi Sushil,
Could you please elaborate in detail with steps.
Thanks for your help .. Greatly appreciated...
Best regards,
Prabhu

WebDynpro with embedded SAP GUI for HTML transaction

Hello,
I have been given a requirement for a WebDynpro application that will have some links and figures at the top and underneath that there will be a SAP GUI for HTML transaction visible. What is the best method for handling this type of scenario? This is a 7.0 portal connecting to ECC 5.0 on the back-end.
Thanks,
Bert

Hello Bert,
I would have implemented your scenario in following way:
1. Create a transaction iView in portal using SAP GUI for HTML.
2. In the web dynpro application, you have multiple choices to use the transaction iview created in above step.
         a. Use a IFrame UI element giving it the portal based url for the transaction iview
         b. Use POrtal Navigation API to navigate to the transaction iview.
         WDPortalNavigation.navigateAbsolute(
         "ROLES://portal_content/com.sap.PageNavigationProject/com.sap.TargetPage",
            WDPortalNavigationMode.SHOW_INPLACE,
            (String) null,
            (String) null,
            WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
            (String) null,
            (String) null,
            [<url params>]
Hope this helps you.
Regards,
Prasanna

ESS Java Iviews vs. SAP GUI for HTML Templates

Similar Messages

Maybe you are looking for