ESS Leave request : Asks for login and password.

Hello,
We are on R/3 4.7 and ITS 6.2 with EP 50.4.
We are using the SAP Inbox service here integrated with portal. (BWSP).  I am able to see the SAP Inbox along with workitem.
When I am selecting the workitem  (leave request came in inbox for approval)  and  clicking other than execute button on it i.e. attachments, forward, Replace or resubmission it is working but when I click execute button it is once again asking me the login  and password to enter SAP system.
If I enter the same again works properly.
We are having   ITS 6.20 and UWL supported ITS 6.4. So we must go through BWSP only.
Kindly reply for the following.
Thanks and regards,
Gaurav J.

Solved by basis people.

Similar Messages

  • Access .mdb asking for login and password in Crystal Reports.

    Hello Experts,
    I am VERY new to Crystal reports and I am am having a Major problem running a VERY simple report.
    First off I am using Visual Basic 2008 to create a Crystal Reports Application...
    I am using the Report Wizard to create and the Northwind database as my database or OLE DB(ADO).
    The provider I am using is the"Microsoft Jet 4.0 OLE DB Provider".
    I am NOT entering a User ID or Password in the wizard and the Access file is NOT protected.
    Everything seems to work fine and I can see the report in the "Main Report Preview" but when I start Debugging to see the report in the form it prompts for a User ID and Password....
    If i type nothing and just hit finish it says "Logon Failed"
    If i hit cancel no report is generated..
    I have been messing with this for days now...
    I have tried using Visual Basic 2010... Same results.
    I have tried Office 2003, 2007, and 2010... Same results.
    I Have uninstalled and reinstalled Visual Basic 2008...
    My professor suggested this link to fix: http://support.microsoft.com/kb/888734
    This does not work either... Nor do I have "Typing Tutor Deluxe" by Global Software Publishing installed...
    PLEASE HELP ME so I can learn Crystal Reports!!!!

    Please help with this!!!
    I can design a Report in Crystal Reports 9...
    Then Load it into VB and it works fine...
    I CANNOT use the wizard in VB to design a report that works when i try to debug!!!

  • New Imac. I get rid off login password from security and account and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

    New Imac. I get rid off login password from security and accounts and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

    First, reset your password as follows.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.
    If you're being prompted to authenticate when making changes to files inside your home folder, continue as follows.
    Back up all data now.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Junked old macbook for a new one. changed apple id password from a different mac. i want to login and it asks for name and password. no matter what i type i cant seem to login. any way help?

    junked old macbook for a new one. changed apple id password from a different mac. i want to login and it asks for name and password. no matter what i type i cant seem to login. why cant i just enter my apple id and password. or is there a way to change whatever name and password are on the new one from another mac so i can login. anything helps...thanks

    Just open System Preferences>Users & Groups and unlock the preference pane with your root password.
    Set the New Account to be an Administrator and fill in the rest of the data and then click "Create User".
    I would suggest using this user to be YOU with admin capabilities. I wouldn't use the root user - too much damage could occur if you're not sure what you're doing. If you have files, etc., that you want to move to this account, simply but them in the Shared folder - or if you 'rescued' some old files and the like from your 'trashed' MBP, you can put them in your NEW admin account folders.
    Hope I've explained myself well - call back with any questions!
    Clinton

  • SSO Configuration not working - Still asking for Userid and password

    Hi Guys,
    I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
    For Testing SSO I did following steps on portal:
    System Administration > Support > SAP Appliction > SAP Transaction
    Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
    Instead of SE12 screen, I get Logon Screen asking for USERID and password.
    I should be getting SE12 screen directly without entering USERID and PASSWORD.
    I tested with Transaction iView (SE12)  and getting the same logon screen. After entering userid/password  it displays SAP Easy Access menu instead of displaying SE12
    Please help.
    Thanks a lot.
    mini

    Hi Sandeep.
    Thanks for your reply. Here are the answers to your questions:
    1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
    2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
    Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
    3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN. 
    In RZ10 it has 3 parameters:
    login/accept_sso2_ticket = 1
    login/create_sso2_ticket = 2
    icm/host_name_full = sapecc6.tri.com 
    4. What is the result when you test the system connection?
    WAS & ITS Connections are successful.
    Connection test for Connectors is giving following results:
    Results
    Retrieval of default alias successful
    Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
    My Connectors Details:
    Application Host : sapecc6
    Gateway Host : sapecc6.tri.com
    Gateway Host : 3301
    SAP Client : 800
    SAP Client : EC7
    SAP System Number : 01
    Server Port: 3201
    System Type: SAP_R3
    I am using same userid for Portal and backend.
    5. Are the 2 systems that you want to configure SSO in the same domain?
    I am trying to connect R3 to Portal.
    Please give me directions to fix the problem.

  • Why it is keep asking for Username and Password but i didn't use any username and password with my database.

    Why it is keep asking for Username and Password but i didn't use any username and password with my database. Please help me i m very frustrated right now please help anybody. I m new in this.,

    Hi,
    Please check below threads:
    Crystal Report Layout asking for Login Info
    SAP B1 ask for credentials to print or to preview Crystal Reports report

  • Sharepoint2013 Stop asking for UserName and Password

    Hi,
    I have Installed New sharePoint2013 Server , I face Issue that Sharepoint Site keep asking for UserName and Password aeach Time.
    I set as  windows authentication in both IIS and Central Administration ,
    and I configure The IE and I set Automatic Login with Current Username And Password and I put it in Trusted site  and nothing  change.
    I also have sharepoint 2010 server and when I configure it like above it
    stopped ask me for UserName and Password ,
    Can any one help me what maybe  the problem in SharePoint server2013.
    thank you,,,

    Hi,
    Try following these steps:
    Adding the site to Local Intranet Zone: 
    Navigate to Tools > Internet Options
    Under Security tab, navigate to Local Intranet > Sites > Advanced. Enter the URL of your SharePoint site and click Add. Uncheck theRequire server
    verification (https:) for all sites in this zone box and click Close
    Adding the entry to the Credentials Manager: 
    Go to Start > Run and type in control keymgr.dll to open the Windows key manager.
    Alternatevily: navigate to Contorl Panel > User Accounts > Manager Windows Credentials
    Select Add a generic credential
    Add your SharePoint site URL, login and password to the corresponding fields. If this entry already exists, edit it to have your login credentials. 
    Reboot the computer.
    If you are missing the Add button, you may want to modify Windows Registry to be able to save the password.
    Note: for editing Windows Registry, administrator rights are required. Editing Windows Registry is not safe and you will perform it at your own risk.
    In Windows, go to Start > Run and enter regedit.
    Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\.
    Find the DisableDomainCreds entry. A value of 1 (enabled) will prevent you from saving new credentials. 
    Change the value to 0 and reboot. Now you should have the Add button available. Note that 0 is the default value.
    Also check the LmCompatibilityLevel entry. It should be set to 3, which is the default value. If you have another value, change it to 3. If it does not
    work with 3, then also try it with 2.
    Reboot the computer to apply changes.
    Ref: http://hosting.intermedia.net/support/kb/?id=1668
    If this helped you resolve your issue, please mark it Answered

  • Ask for Username and Password while Opening an Applet

    Can we code such a way that , While we open an Applet , It should ask for User and password and upon sucessful validation , the Main applet must be loaded !
    Any Suggestions Please !
    Thanks .....

    public class FirstApplet extends Applet {
         private boolean authentified = false;
         private SecondApplet applet = null;
         public void init() {
              System.out.println("FirstApplet: init()");
              authentified=authentificate();
         public void start() {
              System.out.println("FirstApplet: start() "+authentified);
              if (authentified==true) {
                   applet=new SecondApplet();
                   applet.init();
                   applet.start();
         public void stop() {
              System.out.println("FirstApplet: stop()");
              if (applet!=null) applet.stop();
         public void destroy() {
              System.out.println("FirstApplet: destroy()");
              if (applet!=null) applet.destroy();
         private boolean authentificate() {
              System.out.println("FirstApplet: authentificate()");
              // ask the user for username and password
              // check the password, if it's ok, return true
              // if it's not okay, return false
              // how to do a login window, see
              // http://www.codeguru.com/java/articles/510.shtml
              return true;
    }

  • I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

    I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

    Try
    https://iforgot.apple.com

  • I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account.  On my ipad it logs into my original email account and I see no where to log into another email account.  If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to.  It did not send to back up email account either.
    Can I log into 2 email accounts on my ipad where it says mail at bottom?
    Can I have 2 apple ids?
    If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
    (won't let me)
    If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

  • I'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

    i'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

    If it is asking for an APlle ID password for an ID you do not recognize then you have stumbled upon the Activation Lock feature of IOS7.
    Read more about it here:
    http://support.apple.com/kb/HT5818

  • RE1000 asks for username and password

    I have the RE1000 installed as extender for my WRT110 router. I was told by Linksys live chat tech that this would be suitable for our home network. When in the family room or on patio (where I have weak WiFi usually), the Extender shows on my iPad in the list of available WIFI and has excellent icon (the router usually has one or two bars and goes in and out).
    When I try to access the Extender on my iPad, it asks for username and password but will not take it. Should I run setup again or what? 
    Solved!
    Go to Solution.

    in setting up the range extender, it will give you the option to connect to your network. so essentially, you will not have to define/ specify the settings manually. the purpose of the range extender is to extend the signal of the main network, not create a separate network of its own.
    i suggest that you RESET the range extender and run the setup wizard again. make sure to connect the device to your network. once the devices have synced up, you will be able to fully utilize this device.

  • Why asking for username and password once entered

    Hi!
    While configuring a new account in Outlook 2010 from Internet it asks for username and password one more time even after entering it once at the beginning of the account setup.
    Can anybody provide some details. Can't the automatic setup take the entered credentials once for all?
    Exchange 2010 and 2013
    Thanks.

    Hi,
    Based on my experience, the credential issue can be caused by the connectivity issue.
    Thus, let’s check if Outlook Anywhere connection is well by using ExRCA:
    https://testconnectivity.microsoft.com/
    Thanks,
    Angela Shi
    TechNet Community Support

  • ITunes asking for username and password on XP

    iTunes asking for username and password on XP

    hi all,
    this was due to the password sitting at database level i made it to sec_case_sensitive_logon=FALSE.
    it worked thanks...

  • Problem with iWeb asking for username and password to access my public site

    Today for some reason anyone trying to access my site is being asked for username and password. I have made no changes that would require a password. My site has always been public.

    I am having the same problems. My site is public, I checked the settings on the public folder on MobileMe to ensure that it was public and did not require password protection either. But for some odd reason, even though I didn't change anything, my site's pages seem to require a user name and password to get into them. If one continues to click cancel, the page continues to load.
    This does not happen every single time, but it happens more often than not. I have tried this with my iMac, Macbook, as well as my iPod Touch, and I get this on all machines. My brother has tried logging in from another location using his Macbook Pro, and he gets the password prompt as well.
    I tried turning on password protection to the site and uploading the changes, then disabling password protection and reupping the changes once again. I've tried uploading entire site, instead of just changes, but the problem continues to persist. I definitely need this issue solved since this site is important to me.
    The site url is: http://www.globalwinetour.com
    Does anyone have any suggestions to rectify this, or does anyone have any idea what is causing it? Am I missing something here? Am I doing something wrong? Please help me out!
    Many thanks in advance!

Maybe you are looking for