ESS MSS leave workflow problem when updating IT2001 & IT2006

Dear all,
We have one issue in our production portal leave system. Hospitalization leave was applied for 22.06.2011 to 28.06.2011. Workflow was done properly. I checked workflow log also. It was done properly. But some how Infotypes 2001 and 2006 were not updated at all for the leave applied. I don't understand what could be the problem. I checked the leave table PTREQ_HEADER. I could see the below statuses.
1. SENT
2. APPROVED
3. ERROR
4. POSTED.
I want to know how the update to IT2001 & IT2006 missing. Is there any special program to post the data to IT2001 and IT2006 .
I appreciate your inputs.
Regards,
Venkat.O

Hi,
Hmmm, clearly there had been some problems due to the ERROR status. Do you know who managed to fix the problem (and how) (for example check the POSTED line in table PTREQ_HEADER and check last changed (or similar) field. Maybe someone tried to manually handle the error and caused the problem. Could you get some more information about the error in PTARQ?
Actually from my point of view this is not a wokflow problem at all. Could you just ask the HR guys to fix it? Isn't it possible to make the infotype entries directly with PA30?
Regards,
Karri

Similar Messages

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

I have a problem when updating applications on iOS 7.0.2

I have a problem when updating apps on iOS 7.0.2 to go to the appstore I get the update but only tells me open, not update, I have to uninstall and reinstall te app and gives me the option to update. Sorry my bad english

I am in the process of installing 9i on SUSE Linux 7.2. The only Linux that is certified to run 9i. The machine is is a fresh install of SUSE. I am running into the same problem. I ran through the first make problem by going to a shell and invoking a make -f oemagent.mk. Built the library just fine. Got errors when trying to run make -f ins_rdbms.mk. Not sure why the installer or the command line is having problems.
Not sure if I can just hit Ignore and go on????
Any help would be appreciated. You would think 9i would spread like butter on their "Certified" platform.

I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

Hlep.. Problem when updating aspx templates

Hi there, I-m having a huge problem when updating pages from
a .asp template, it replaces my 1 line of code
with <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %> and errases the resto of the
attributes i have on each page, making it unfunctionable.
Does anyne know why the template when updating does that?
thanks for your help

Hi Suman,
The changes are getting lost when i logout and login back to SAP.
In Current session i am able to see the changes. But changes are lost as soon as i end up my session,
but this is happening only in case of template box width. All other changes are retained between my various SAP sessions.
So wanted to know if any other value is over-writing the template box width values.
Regards
Manpreet Singh

I have problem when update to belle the folder of ...

I have problem when update to belle the folder of games disappear?? c7
I need to solve ??? Plus

Do you mean that pink folder w/ the controller icon on it? I lost that too on my N8. Actually, lost all of the folders that came with Anna like Applications & Music. Wish I could get them back as now I can only make the generic yellow folder which isn't as aesthetically appeasing.
However, reading articles on Belle there was a picture of a Belle N8 with the games folder shortcut on the homescreen - so maybe it still exists & I just cannot find it.
Good luck & I'll let you know if I figure this out.

Validation problem when update a row in OAF

created a application using OAF. No problem to create a row, when tried to update the row, received the following error message:
oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key
2) Steps to Reproduce
select a row from search result page for update, after change the value and apply it, received the following error message:
oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key

yes. it is the EO based VO page. Create and Update used same VO and no problem to create the row, had problem when update the row.

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see spec

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree

ESS/MSS Leave Request Issue

Hello All Experts
We have implemented ESS/MSS. Everything is working fine except the Leave Request approval. The approval request comes to the approver's inbox.When we try to open the approval request, the webdynpro application is getting but there is no data in the same. I mean the webdynpro application which is launched is blank.
Could anyone please try to help me how to make this webdynpro application up and running ?
We are using EP 7.0 with ECC 5.0
TIA,
Vivek

Hi Chuckie/Ton Groot,
As mentioned in post by Ton Groot,
I navigated to System Administration --> System Configuration --> Detailed Navigation --> Universal Worklist Workflow à Universal Worklist - Administration
I get a list of
Universal Worklist Systems
System Alias       Connector Type                       Action            Activate
AdHocSystem |   AdHocWorkflowConnector |                        | Deactivate
SAP_ITS_XSS |   WebFlowConnector           |   Re-Register    | Deactivate
ActionInbox     |   ActionInboxConnector        |                        | Deactivate
When I click on Re-Register button under Action, I get the following message
Item type registration was successful for the following systems:
- SAP_ITS_XSS (WebFlowConnector)
I have also cleared the cache by navigating to Cache Administration Page
Still the issue remains.
TIA,
Vivek

HELP NEEDED: ESS Sick Leave Workflow

Hi ESS/MSS Gurus,
Good day!
I am a newbie workflow consultant currently working on enabling ESS-MSS for a client. In summary, here are their requirements:
1. Leave Requests and Clock In/Out Corrections - Upon initiation of employee request, the work item is sent to the manager for approval. Regardless of the decision (either approve or reject), the employee will be notified via an email notification
2. Sick Leave Requests - upon initiation of employee request, the work item is sent to the company doctor for approval. Regardless of the decision (either approve or reject), both the employee and his/her immediate manager will be notified via an email notification
Here are some details regarding how I went about it:
1. Leave Requests and Clock In/Out Corrections - Created a copy of workflow WS12300111 and included send mail steps after TS12300097 (Approval Process) to notify the work item initiators.
2. Sick Leave Request - Created a copy of workflow WS12300111 and included send mail steps after TS12300097 (Approval Process). The approval process is pointed to the Position Company Doctor. After which a step was inserted after the approval process which uses a customized method (using FM SWX_GET_MANAGER) to determine the employee's manager. Then send mail steps are executed for the employee and the manager
3. Clock Corrections and Sick Leave/Leave Requests belong to the same Rule Group
During testing in our sandbox client I was able to successfully test all of the workflows. However, when I migrated the changes into our pseudo-QA system, I cannot launch the Sick Leave workflow from ESS. I encountered the following errors in PTARQ (standard leave request and clock in/out correction are ok):
1. Scenario 1: applied leave coincides with the working time of the employee
   "Document created with information: P2 848: Absence encompasses planned work time
2. Scenario 2: when only the total nmber of hours is entered for the applied sick leave date
   "No document created: HRTIM_ABS_REQ 094 Indentical clock times were adjusted, Check the entries"
3. Scenario 3: applied leavedoues not coincide with the working time
   "Document created with warning" HRTIM00BLPRETRO 001 Time entry triggers retroactive accounting in payroll"
For all cases, no work item was created in the back end.
I would like to tap unto your wealth of knowledge and experience on how to address such errors. I need to determine if this is a misstep in the workflow, HCM, or ESS/MSS configuration to better isolate the errors.
Your immediate response is highly appreciated.
Regards,

you dont need a custom WF first of all, You can directly use standard one cause we have a standard mail program
called rptarqemail
ie
The mails will be directly triggered to the mail address once you run rptarqemail.
Please check if you are running the report using the option since last
run. The procedure is usually this :
1. Create a Leave Request
2. Execute the report RPTARQEMAIL.
3. Approve the Leave Request.
4. Execute the report RPTARQPOST.
5. Execute the report RPTARQEMAIL.
Now to determine different approvers for different types of leave you can use the option of badi PT_GEN_REQ
IF_EX_PT_GEN_REQ~FIND_RESP_AND_DEFAULT_NEXT_PRC.
Method FIND_RESP_AND_DEFAULT_NEXT_PRC of badi
PT_GET_REQ might be utilised here.
Please have a look at the method
CL_PT_REQ_SEARCH_NEXT_P~SEARCH_NEXT_PROCESSOR.
If you are implementing the badi then make sure you copy all the methods
and implement the one, as mentioned.
also note that
Standard Leave request application offers the following options to
determine the Next agent. This specifies whether and how the next agent
of a leave request is to be determined.
Last Agent: The system reads from the database the last agent to have
had requests from this employee.
Line Manager: The system uses the organizational model to determine the
agent.
Last Agent, Then Line Manager: If no agent is entered in the database,
the system then uses the organizational model to determine the agent.
No Calculation/Manual Entry: The system does not determine a next agent.
Employees can enter an agent manually.
However if the customer has a different requirement, the BADI PT_GET_REQ
method FIND_RESP_AND_DEFAULT_NEXT_PRC is provided for this purpose.
the message you get is correct and its a information message which will not stop leave request, they depend upon customisation which can be hidden too
check here
http://wiki.sdn.sap.com/wiki/display/ERPHCM/LeaveRequestCustom+Messages

ESS/MSS leave approve view is diaplaying as error

Hi All,
We are using ESS/MSS for leave request and approval process.
We did neccessary configuration for the same. I have created leave request in ESS successfully and the same request displayed as item in UWL/Task. When try to approve, by clicking the link, it throws an error.
The error details are : 503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Mon Jan 16 14:31:49 2012
Module: http_j2ee_mt.c
Line: 820
Server: eppilot_KHE_11
Error Tag:
Detail: Cannot reach external Application Server on eppilot:51111
When i try to preview the Iview 'leave reuqest approval' as a stand alone(from Content administration), its shows the approval view perfectly . even i tried to approve from their , its approving perfectly. But the Leave request approval view is not displaying when manager click the link to approve in UWL/Task.
Kindly help.
Thanks,
Venkat

Hi Andy,
Thanks for your reply.
As per the SAP Note 779075,
I have changed in SWFVISU same as below.
TS12300097 WebDynpro Java
                APPLICATION LeaveRequestApprover
                DYNPARAM    wi_id=${item.externalId}
                PACKAGE     sap.com/ess~lea
TS12300116 WebDynpro Java
                APPLICATION LeaveRequest
                DYNPARAM    wi_id=${item.externalId}
                PACKAGE     sap.com/ess~lea
The application "LeaveRequestAdmin" is not released. Use transaction SWFVISU to delete the following entry:
TS12300104 WebDynpro Java
                APPLICATION LeaveRequestAdmin
                PACKAGE     sap.com/ess~lea
1.After that , in Universal Worklist configuration, I have selected the row..system alias 'SAP_WedDYnpro_XSS' Connector type 'Web flow connector, clicked the re-register button. I got the folowing message :
Item type registration was successful for the following systems:
- SAP_WebDynpro_XSS (WebFlowConnector
2. After that i have cleared the cache.
But still i am getting the same error message, when i click the leave request item. Kindly help.
Thanks in advance.

ESS/MSS Leave Request

I am working ESS/MSS, we are deployed all the Business packages in the portal and once we open Leave request application
"There are no Customizing settings for absence type"
The above Error displayed,is there any configuration is required for R/3. if yes, can any one please help me
Regards,

Hi,
Have you configured the basic settings in TM like Absences, Attendances, AQ types. To achieve the absence types in ESS, you need to configure the absence types in R/3.
Good Luck
Om
Reward it, if u feel helpful.

Problem when Updating the Challan (J1INCHLN)

Dear Expert,
I am facing problem when i am updating Challan throught 'J1INCHLN'. I debuged the 'J1INCHLN' and got the problem that TDS line item in BSEG table and TDS line item in WITH_ITEM does not match.
Thank you in advance,
Denish Patel.

Hi,
This error also comes if you donot mention Business Place and Section code during the transaction. Please check whether
you have defined business place and section code and assigned to your company code and also entered them during
transaction.
Regards,
Sadashivan

[HELP] Problem when update 1 unicode form

hi all,
I got a problem when I update unicode form :(
so, I have already tested my web application (Struts-ibatis-velocity-tiles) on my PC (tomcat 5.5.12, mysql 4.1 - utf8 default, JDK 5.0), everything was okie. I could update 1 unicode form (the form which contains unicode characters - firstname, lastname). I use 1 filter for output and input, below is my web.xml:

<filter>
<filter-name>Set Character Encoding</filter-name>
<filter-class>filters.SetCharacterEncodingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>UTF-8</param-value>
</init-param>
</filter>

<filter-mapping>
<filter-name>Set Character Encoding</filter-name>
<servlet-name>action</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>Set Character Encoding</filter-name>
<servlet-name>velocity</servlet-name>
</filter-mapping>
but ... when I deploy and run it on eatj.com, mysql4.1 - utf8, jdk 5.0, I couldn't update unicode form, my last name and first name fields couldn't be saved with unicode characters (utf-8) ...
what happened :( ... Is this problem of hosting or my web application ??? :(
help me :(
thanks in advance,
bowlkhin

You need to install the bc package. Apparently the script uses bc to calculate some integer values.
Brian

ESS/MSS leave reques Enhancement

Hi,
I am trying to do some enhancement to ESS/MSS Development Component in the NWDS, but it is not getting reflected. can someone help me out to resolve this issue..??
Thanks
Angshuman

Hi Praveen,
Extended notifications for SAP Business Workflow notify users by e-mail or SMS about work items that need to be processed. Notifications are sent to the relevant user in the form of messages. At present, e-mail messages (HTML or text-only) and SMS messages are supported.
Well I would say its not the base for all mails but surely for notifications.You can send mails even without configuring it.You can try it out in dev by creating a simple workflow with mail step.For mails you need to maintain the SCOT settings and evn that is done by BASIS guys so...u need not worry about it.
Also , for extended notifications i would suggest you to go through this link
Link:[http://help.sap.com/erp2005_ehp_04/helpdata/DE/d5/581ee8d56f1247bf34cfcd66d16d81/frameset.htm]

ESS MSS leave workflow problem when updating IT2001 & IT2006

Similar Messages

Maybe you are looking for