ESS/MSS on SAP Portal Blank screen instead of IViews.
Hi,
ESS/MSS roles are visiable on portal but when I assigned it to my own user I could not see the iViews we are getting blank screen please screen.
Please help us.
hi,
you need to create user in the backend system and you need to map user in backend using SSO by either logon tickets or User mapping.
if you have not created user then to create user in backend follow following steps:
Please follow this steps to setup ESS/MSS in Portal.
Configuration Settings for ESS
Create Infotype 0105 for all Employees
Use
To link a user in the portal to the employee in the backend, the employee master records must be extended. The portal user information is stored in the backend in the communication infotype 0105, subtypes 0001 (System User Name SAP System (SY-UNAME)) and 0010 (E-Mail).
Prerequisites
u2022 The users MANAGER and EMPLOYEE are mapped to the relevant portal users, ideally by SSO, so that they have the same name.
u2022 You must have created personnel numbers in the SAP system for the relevant employees.
u2022 The following roles are assigned to your ERP user which should be mapped to the employees: SAP_EMPLOYEE, SAP_EMPLOYEE_ERP, and SAP_EMPLOYEE_ERP05. The latter is a composite role for all country specific functions. You can select only the specific country role for your user and delete the other roles.
Procedure
1. Choose the following:
SAP Easy Access Menu Human Resources u2192 Personnel Management u2192 Administration u2192 HR Master Data u2192 Maintain
Transaction PA30
2. Enter your employeeu2019s personnel number
3. In the direct selection section, enter infotype 0105 and choose the Create button.
4. In the subtypes for infotype u201CCommunicationu201D dialog box, select 0001 and then Enter.
5. In the field ID/Number, enter the ID used to log in to the portal
6. Save your entry.
7. Return to the Maintain HR Master Data screen.
8. Keep the infotype 0105 in the infotype field and choose Create.
9. In the subtypes for infotype u201CCommunicationu201D dialog box, select 0010 and then Enter.
10. In the ID/Number field, enter the email address and save your entries
11. Repeat steps 2-10 for employee 91000067. ID/Number MANAGER.
also Jco connection needs to be configured..
Regards,
Jigar Oza
Similar Messages
-
Only Appraisals of year 2010 are shown on ESS, MSS in SAP Portal
Hi,
I have a problem on my enterprise Portal. I have 2 iview's configured which uses an standard WebDynrpo Abap application of ESS and MSS to show "Employee Documents". The problem is that there are only shown "Employee Documents" of year 2010, but not of year 2011. We have some appraisals on status "In course" and "clompleted" for this year, but these don't appears.
The configuration of the 2 iview's are the following:
Iview name: Appraisals
Application name: HAP_START_PAGE_POWL_UI_ESS
Configuration name: HAP_START_PG_POW_ESS_AC
Platform: Web Dynpro for ABAP
Iview name: Team Appraisals
Application name: HAP_START_PAGE_POWL_UI_MSS
Configuration name: HAP_START_PG_POW_MSS_AC
Platform: Web Dynpro for ABAP
Anybody knows where should I modify date range, or configuration to be shown all "Employee Documents"?
Thanks in advance.
JavierHi,
Finally I cleaned cache of applications OSA-POWL-ESS and OSA-POWL-MSS, whith report POWL_D01. After I modified queries for these applications on transaction POWL_QUERY (OSA_MSS_IN_PLANNING, OSA_MSS_IN_PROCESS, etc).
With this, I solved the problem!
Thanks for helpful.
Javier -
Problems with Integrating SRM, ESS/MSS into one portal 7.01
We are having major problems with integrating SRM, ESS/MSS into one portal 7.01?
Do we need to have a support portal for each.
We created test users for systems but sometimes we lose the users for no apparrent reasons. Very strange. Please advise and if you have new documentation regarding SAP Portal Authorization it will be helpful.Hi
Please search on SDN for integrating SRM, ESS/MSS in Portal.
Regards
Arun -
I want sap easy access screen as an iview in the portal
Hi ,
I want sap easy access screen as a iview in portal ,how can i do it.
I used SESSION_MANAGER tcode and created a transaction iview but it is going to rs00 tcode screen,
PLZ help meHi
I have created an iview with tcode Session_Manager and it is working fine.What is this txn rs00? When I check this tcode in our ECC 6.0 system, it says rs00 does not exist.
Check your system setting and iview config again.
Regards
Prabhakar Lal -
MSS within SAP Portal: Organizational Structure
Hi!
I would like to set up MSS within SAP Portal.
What are the customizing steps to set up the Team, Budget, Projects, Planning?
How to create/map the Organizational Structure?
Thank you very much!
regards
JürgenYou just need to use the transaction PPome and see where his position maintained
on organisation
And for the spro
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vie
MSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)
Then you have to check the IMG step # Object and Data Provider ->
Object Provider -> Define Object selections:
MSS_LTV_EE_ALL:
Rule for Root Objects: MSS_LTV_RULE1 (Team: Employee's Organizational Un
Rule for Target Objects: MSS_LTV_RULE2 (All Employees)
MSS_LTV_EE_DIR:
Rule for Root Objects: MSS_LTV_RULE1 (Team: Employee's Organizational Un
Rule for Target Objects: MSS_LTV_RULE5 (Team: Employees in an Org. Unit
MSS_LEA_EE_ALL:
Rule for Root Objects: MSS_LEA_RULE1 (Absence: Employee's Organizational
Rule for Target Objects: MSS_LEA_RULE2 (All Employees)
MSS_LEA_EE_DIR:
Rule for Root Objects: MSS_LEA_RULE1 (Absence: Employee's Organizational
Rule for Target Objects: MSS_LEA_RULE5 (Absence: Employees in Org. Unit
Then you can check the rules for object selection: IMG #Object provider
define Rules for Object selection
MSS_LTV_RULE1: evaluation path SAP_MANG
MSS_LTV_RULE2: SBESX
MSS_LTV_RULE5: MSSDIREC
MSS_LEA_RULE1: SAP_MANG
MSS_LEA_RULE2: SBESX
MSS_LEA_RULE5: MSSDIREC
This is meant for Team calendar with respect, But this is more or less same with other views as well -
How can I call ECC 6.0 data as ESS/MSS in to Portal?
Hi One and all,
I have ECC 6.0 and portal. How can I Call ECC 6.0 data in to portal?
I have questions please clarify these...
By using sm59 can I assign RFC connection? how?
What is SSO? Is it mandatory to access portal?
Should SLD exist? If yes how can I check wether it is existing or not?
Where can I configure SLD?
Are JCO's established in the portal automatically or do we need to configure those?
when Iam maintaining JCO's I didn't find JCO's. Whats the problem?
what are the Tcodes in ECC for checking ESS/MSS in portal?
I need MSS and ESS configuration steps can any one send me link?
Tomoro I need to give demo on this can any one help me?
Thanks,
Naresh.Hi Potru,
Here is the good URL for ESS configuration
ESS Configuration
http://help.sap.com/erp2005_ehp_04/helpdata/EN/80/7d6641df6c7f47e10000000a1550b0/frameset.htm
SLD Configuration (this is SAP Basis Team Responsibility)
http://help.sap.com/erp2005_ehp_04/helpdata/EN/8f/a5284203845a33e10000000a155106/frameset.htm
Single Sign On Configuration Steps
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/dd9b9ce80311d5995500508b6b8b11/content.htm
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20913057-efe2-2b10-2391-949c27ac910d
You need to Configure JCO connections(this is also Basis Team Responsibility)
Path: SAP Portal---Content Administration--->WebDynpro
Let me know if you need any more clarifications.
Thanks and Regards,
Abhi. -
Dear Experts,
The client has Indian Payroll and Organization Management implemented in R/3.Now the client wants to go for ESS and MSS module.I am new to the ESS MSS module.As a demo I have asked to configure it in IDES.Beofre configuring it in IDES does EP consultant have any role in that.Please tell me what role does EP consultant have and in which phases?. What are the dependencies of SAP HR consultant on EP consultant and ABAP Consultant
Also to start my configuration in ESS MSS please guide me from where to begin with.In case if u have any configuration documents,Please share. Does the SAP Press book on ESS MSS helps?. Where can I find relevant material for this configuration.
Thanks In advanceHi,
Yes, EP consultant and ABAP consultant require for bit configuration.
SAP Press book will help upto certain but I would suggest refer SCN document to configure ESS and MSS.
Initial steps briefly:
1. Activate the business functions ( HCM_ESS_WDA_1 and HCM_MSS_WDA_1 if EhP5 using t code - SFW5.
2. Active the services ( Called as application) using T Code SICF. Here, EP consultant may require. But you can also do the same.
3. View the standard application (services) using test service option.
4. If you want to use Launch pad then configure ESS Role using LPD_CUST.
5. Copy standard ESS menu to ZESS and assign to application HR*ESS*MENU using SE80.
Here, you will require ABAPer.
6. Assign Portal ESS and MSS role to user.
7. Also assign SAP*ESS*EMPLOYEE role to ECC user using SU01/PFCG.
This are the major steps to start basic ESS and MSS application. Further you have to configure application configuration.
Hope this will help. Please let me know further details required.
Thanks,
Ketul -
ESS/MSS PCR Forms Portal 7
We plan on having a requisition form created which will have a number of fields including position and job information. Once the requisition is approved, then the user can begin completing the new hire form. When they come to the position field on the new hire form, can we default the position number entered on the requisition form? Somehow we need to link the position number with the created requisition.
We were not sure you could pull data from one form to another or if everything has to come from the SAP backend.Hi
Please search on SDN for integrating SRM, ESS/MSS in Portal.
Regards
Arun -
NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine
Hello,
with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maintenance costs (administration overhead for evry portal). For a small Customer i will build one Portal for all. It is possible e.g. to use the BI Portal with ESS/MSS and as full portal?
Best regards,
PatrickHi,
So you would like one BI installation with both the ABAP and the Java-stack with the full BI-functionallity and additionally the XSS-component and set it up to work against the ECC ABAP-only system ?
I think the scenario would actually work, but:
1) You might get future problems if you want to upgrade your BI-system and not the ECC-system.
Is it possible to run the old XSS-components in the new java-stack ?
2) You might get future problems if you want to upgrade your ECC-system and not the BI-system.
What if the new version of the XSS-component demands certain java-components which the BI-system do not have.
So my recommendation is still to run the java-stack on both systems.
ECC with the XSS-java-components and BI with the Bi-java-components.
This way you do not lock yourself into a corner and each system can be upgrade independent of the other. -
ESS / MSS -- Error in Portal while Accessing Who's Who (Urgent)
Hi Gurus,
I get the following error while accessing who's who, please clarify
Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.whoiswho/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.whoiswhoapplication failed
some where inside the error log it gives that
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.whoiswho/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.whoiswhoapplication)
Is this becasue of the unavailability of change authorization?
We have'nt actually started the config.
SeraHi,
This is because you have to give end user permissions for the portal user ot access the objects.This is an issue with permission.
refer the note 939412 for solution.
Regards,
Sharadha -
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1047350 /questions/1047350]''
Like the title says. I close a tab I'm done with, and I get a tabless white screen instead of it switching to a tab that's already there. I also get a blank page new tab along with previous ones when I start up firefox. Likely started after updating, but I can't be sure.On the about:newtab page in the upper right hand corner, is there an option to change the blank page to Classic or another option?
Does this happen in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]] -
MSS Customizing Steps for MSS within SAP Portal
Hi HCM-experts!
I would like to integrate MSS functions within SAP Portal.
Where can I find the suitable technical documentation describing the steps with tcode/reports, SPRO steps for:
- Team Calender
- Assigning the user to Organization and to Staff
- Budget
- Projects and Planning functions
Any technical information will be very appreciated!
HolgerPlease go to help.sap.com
here is the link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm -
Taken photos with phone which show in album but when I click specific photos or try to send them it's just blank white screen?checked in photo stream and it's white blank screen there too
Denny
The following is from a person and not a device generated generic reply.
1. This is not Adobe, Rather user to user. We are all visitors here.
2. Your description of "Elements 12" sounds like you are working with Photoshop Elements 12 (photo editor) and not Premiere Elements 12 (video editor). Somehow your thread got posted in the Adobe Premiere Elements Forum. You have posted in the wrong forum. You want the Adobe Photoshop Elements Forum. Please see link.
Photoshop Elements
3. You can re-post your thread at the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
4. Be prepared to give more details....are you working from the Elements Organizer 12 and selecting photos from there to edit in the Editor and then send them back to the Elements Organizer or other?
ATR -
Getting blank screen instead of login screen for HFM
Hi,
i am trying to login into HFM, once i click the launch application, i am getting the Blank screen? i am not getting the login screen.
what is the possible reason for this error?
Thanks in advance
KiranAre you able to see the log in screen of Shared Services?
Rgds
Payous999 -
Getting blank screen instead of login screen for workspace
Hi,
i am trying to login into workspace, once i click the launch application, i am getting the Blank screen? i am not getting the login screen.
what is the possible reason for this error?
Thanks in advance
KiranHi John,
Thanks for response.
if proxy settings are wrong not able to connect to any web related or we can not access only particular?
john, is there any chance java related problem for getting blank login popup browser.
Thanks in advance
Maybe you are looking for
-
Write-through limitation and putAll
Please find the quote below from developer guide, particularly this one In other words, if two cache entries are updated, triggering calls to CacheStore modules sitting on separate cache servers, it is possible for one database update to succeed and
-
I want to share with you my observations at the French SATIS as far as cameras go. In one word: SONY WON THE CAMERA WAR. This year they introduced the EX3, the Z7, the HVR 270 and the Z5. If you add to that the EX1, as well as the classic V1, Z1 and
-
End-user license agreement is not working on mac
I recently updated the Adobe Reader (free version) on my mac, however when I try to open pdf files, it says that it can't be opened because I need to accept the End-user license agreement, but it does not open. i tried removing the Adobe Readerand re
-
Re: Find Host Name thru Forte
At 1:42 PM 5/21/96, <@ig4.att.att.com:[email protected]> wrote: Hi, What is best way to find Hostname under forte on Solaris 2.X platform within Forte? Thanks in advance, [email protected] one quick way would be to issue a RunCommand with the command
-
This happens all the time and I dont use the audio all that much. Yes i can disable the audio but synching it back aagin is not an easy process. I thought the iPad stayed on the same network and last used network, my iPad cahnges in the middle of say