ESS & MSS users in ECC 6.0 into portal

Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
Daya

Open the door and let them in. *grin*
Not sure what you are really trying to ask. ESS and MSS are just grouped content in the portal itself. Your portal users will have portal ROLES assigned to them for ESS and/or MSS. These in turn will tie to backend security roles in ECC.
Now, "where" your users come from will depend on your portal configuration...like setting them to be authorized via Active Directory, an SAP system, etc.
Kinda like this....
user->UME source->portal role(s)--->backend security role(s)

Similar Messages

How to get the ESS & MSS users in ECC 6.0 into portal

Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
Daya

Hi,
You need to have SSO in between ECC and portal and use ABAP engine as your UME.
then ECC users can directly login to portal using the same user id and password.
Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
Thanks,
gopal

ESS/Mss user creation

Hello,
We are implementing ESS/MSS for our client.
Objects have been finished in Development and Quality.
Now we need to move things to production.
Now there is one doubt in my mind.
As per our client there will be around 100 SAP Users who will get SAP GUI installed on their machine.
But for ESS MSS all the employees of organization will be eligible.
Which will be around 500.
Now my doubt comes with Licensing issue.
How does SAP tackle such situation.
As a implementer of SAP do I have to bring some practice into consideration.
Does SAP charge for every licence they give to client at same cost !
All employees will not require SAP GUI on their machines. They will only access ESS/MSS.
We use same UME database for R/3 and Portal system.
Please clarify on my doubt.
Thank You

Thanks Siddharth..
As an implementer for ESS/MSS.... I have made separate roles in R/3.
For ESS:
Z_SAP_EMPLOYEE_ERP (Copy of Composite role....given by SAP for ESS)
For MSS:
A separate role in Portal.
And one role in R/3 with following authorization objects for ESS and MSS:
B_NOTIF    <OBJ> Follow-Up Functions for General Notifications
I_QMEL     <OBJ> PM/QM: Notification Types
PLOG       <OBJ> Personnel Planning
P_HAP_DOC <OBJ> Appraisal Systems: Appraisal
P_ORGIN    <OBJ> HR: Master Data
P_ORGINCON <OBJ> HR: Master Data with Context
P_PERNR    <OBJ> HR: Master Data - Personnel Number Check
S_BDS_DS   <OBJ> BC-SRV-KPR-BDS: Authorizations for Document Set
S_RFC      <OBJ> Authorization Check for RFC Access
S_SERVICE <OBJ> Check at Start of External Services
S_USER_GRP <OBJ> User Master Maintenance: User Groups
Now when Basis team will create a user for ESS.
They will give Z_SAP_EMPLOYEE_ERP role and Authorization role that we created....
other than this do I need to take care for anything else... in user creation process.....

ESS/MSS applications from ECC 6.0 on a SL as ECC 5.0 + EP7.0

Hi all,
We have a "strange" situation on the client and I need you help or guidance.
We are implementing Portal and ESS/MSS on a system landscape as ECC 5.0 for the back-end system and EP 7.0 as front-end.
My problem is if the ESS/MSS iViews which have the data source as ECC 6.0 or higher are available and if yes how their behavior will be on such environment? We should expect errors or bugs or lousing functionalities or restrictions on it?
Perhaps the first point will be if we can implement them? The client wants specific applications like time accounts or appraisals. I should mention to you the client has decided to make an upgrade of the back-end system to ECC 6.0 but is not decided yet when. In the meantime we already start the project for ESS/MSS base on the current system landscape.
What do you think?
Any help will be highly appreciated.
Thanks in advance,
Eugen

I got my answer. You may implement XSS applications as for ECC 5 even on EP 7 but you'll face limitations in functionalities and face lots of tech issues and abnormal behavior from xss applications. Not the ideal system landscape.

Is ESS/MSS configured in ECC 6.0 ??

Hi all,
     Please let me know whether ESS/MSS is configured in the ECC 6.0 by default and if it is how to check it and start working on it.........
Thanks & Regards
Jerry

hi if you have ECC 6.0 it does not mean that you have ESS MSS already configured.
all you have to do is to install ESS MSS to your portal server (EP WAS).
if you are trying to check if some one has already installed it or configured it then you will have to logon to portal and check in PCD -> content provided by SAP
here you will find Employee self service Folder.
if not then you have to deploy the ESS MSS BP.
The link have been changed or revised check this fresh download link for BP
there are mainly 3 BP which you need to install. Make sure you install SAP PCUI_GP 600 first then ESS & MSS.
goto: https://websmp203.sap-ag.de/support
Click on SAP Support Packages - Entry by Application Group
Follow the link goto -> Support Packages and Patches -> SAP Application Components -> SAP ERP ->
SAP ERP 6.0 -> Entry by Component -> SAP XSS (Self Services)
Here you can select the Patch which you want to go after your initial installation which was SP09 i.e
For ESS
Under -> SAP ESS 600 you will get the ESS BP
Click on #OS independent -> supoose you want to go for SP13 then download
SAPESS13_0-20000512.SCA----> SAP ESS 600 Support Package 13 &
SAPESS13P_2-20000512.SCA---->Patch for SAP ESS 600 Support Package 13
similarly for MSS
Under -> SAP MSS 600 you will get the MSS BP
Only      SAPMSS13_0-20000503.SCA---->SAP MSS 600 Support Package 13
Similarly for SAP PCUI_GP 600
Under -> SAP PCUI_GP 600 you will get the SAP PCUI_GP BP (Remeber this BP must be installed first)
only      SAPPCUIGP13_0-20001215.SCA---->SAP PCUI_GP 600 Support Package 13
Also Check : https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=31476
if you have any other questions feel free to ask.
Cheers!!
SJ.

ESS / MSS Implementation for ECC 5.0 (ERP2004)

Hello,
We are preparing to implement ESS/MSS for ERP2004. We are using EP6.0 SP9. The notes for both ESS and MSS business packages refer to OSS Note 761266 regarding the versioning of XSS components. Are the patches for the XSS components supposed to be deployed to the portal environment, the ERP2004 environment, or both? The three patches mentioned are:
PCUI_GP05_1.sca
ESS05_1.sca
MSS05_1.sca
Should these be installed in the portal, ERP2004, or both?
Thanks,
-Matt
Since the patches are stored under the ERP2004folder in the support packages area of Service.SAP.com, I assumed they would be applied to the ERP environment, but I want to confirm this.

Thanks for the clarification James. I thought the patches should be applied to WebAS for the ERP2004 environment, but the OSS note is vague about that fact.
Chuckie, We are implementing ESS version 60.2. ECC 5.0 refers to Enterprise Central Component 5.0, which is how SAP refers to the Core R/3 product in the ERP2004 suite.
-Matt

ESS/MSS with more ECC Systems sap.wdarfc.useSys Problem

Hello ,
we have more a ECC Systems and on one ESS/MSS Portal. Now I found the url Parameter "sap.wdarfc.useSys" in the sdn. In one test ESS Iview I set the Propoerty field to
sap.wdarfc.useSys=SAP_R3_SelfServiceGenerics_MetaDataFIN:XY&sap.wdarfc.useSys=SAP_R3_SelfServiceGenerics_MetaData:XY&sap.wdarfc.useSys=SAP_R3_SelfServiceGenerics:XY&
sap.wdarfc.useSys=SAP_R3_HumanResources:XY&sap.wdarfc.useSys=SAP_R3_HumanResourcesMetaData:XY&
sap.wdarfc.useSys=SAP_R3_HumanResourcesMetadata:XY&
sap.wdarfc.useSys=SAP_R3_Financials_MetaData:XY&
sap.wdarfc.useSys=SAP_R3_Financials:XY
Now should the WebDynpro connect to the system XY. But it raise an error:
That the MetaData RFC connect to system "AB"
What is wrong ? I have checked all JCO Connections.
Another question when the parameter works. Must I copy all the WD Iviews and replace the set "sap.wdarfc.useSys" Parameter ?
Regards
Daniel

I have the solution.
delete SAP_R3_HumanResourcesMetadata
right SAP_R3_HumanResourcesMetaData
regards

ESS / MSS Roles

Dear Gurus,
Iam basically a HR Technical, now moved into functional role.
I need to know how to set one as ESS user or MSS user.
This will be of which part of implementation, will that be the intial stage of realisation?
Please help me with some examples how to create a ess user
I know the relationship will be made at Communication Infotype (105)
my mail id is: [email protected]
Thanks in Advance
Sera
Message was edited by:
Sera

Hi Sera,
To assign Personnel number in R/3 to your portal user:
1) Your portal user is mapped to your R/3 user.
2) Login in R/3 system using your user and password,
3) Goto PA30 and enter pernr you want to assign to your user,
4) Create a record for infotype 105 and subtype 0001 and enter your user name there.
5) save the changes.
This assigned pernr to your user will be ESS / MSS user when you log in to portal.
Hope this helps !!
Regards,
Ruchi

Compatability of ESS/MSS ERP 2004 with ECC 6.0

Hi,
I was using ERP 2004 ESS/MSS on EP 7.0 SP 8. My backend was ECC 5.0.
Recently we upgraded our backend to ECC 6.0. But after the upgradation the ESS/MSS packege is not working on the portal. Its showing the below error.
<b>com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.portal.appdesigner.api_framework
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
    at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
    ... 8 more</b>
Is ERP 2004 ESS/MSS comapatbile with ECC 6.0 or there are any steps to be performed after upgradation from ECC 5.0 to ECC 6.0?
Any suggestions??
Regards
Debasish

The new Business Packages meant for ECC 6.0 are based on Webdynpro for Java ....which have a different and better look and feel ....these are based on a RoadMap(Floor Plan Manager) which let the employees/managers to go from Overview(dislay the data),edit (to change) ,Review(to review) and Confirmation (To Confirm)....
Hope it helps.
Shikhil

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

ESS implementation posibility with ECC 6.0 and EP 6.0

Hi ,
To implement ESS with ECC 6.0 and EP 6.0
Any body can suggest for this implementation feasibility and possibility.
What are the Business packages has to down load and where can we get those BPs.?
After importing into EP 6.0 , what are the configurations and settings required to get SAP HR screens/ivews (preview when we create after systems in EP),
What are the prerequisites and hardware and software requirements for 8000 users (apprx) ?
Any version upgradations are required for implementing this or
can we use this ECC 6.0 as backend and EP 6.0
and please help required for all those things.
Thanks
Kumar.

For ESS/MSS based on ECC 6.0 (ERP 2005), you can download the XSS business packages from
service.sap.com/download --> Support patches and packages --> Entry By application Group --> SAP Application Components --> SAP ERP -->
SAP ERP 2005 --> Entry By Component --> SAP XSS --> (SAP ESS 600, SAP MSS 600 and SAP PCUI_GP 600).
You can use JSPM to apply these business packages on to the portal. To use JSPM, you have to login to the portal server using <SID>adm to be able to use the JSPM tool.
Business Packages and components in it: you BP consists of the 2 following parts
1) BP_ERP5ESS / BP_ERP5MSS is Portal Business package which consist of iview, pages and roles.. while SAP_ESS / SAP_MSS. is WebDynpro part of it.
These iviews will direct to some WD application which are part of SAP_ESS / SAP_MSS. and they are deployed on server.
2) you have to simple go to
service.sap.com/downloadSupport patches and packagesEntry By application GroupSAP Application ComponentsSAP ERPSAP ERP 2004/2005--Entry By ComponentSAP XSS
pick the correct version and download. You get full package not incremental. Old ones will be overwritten when you deploy them. try to download them again if it failed first time.
3) Refer note 761266 for package compatibility.

ESS, MSS node not displaying in portal

Hi,
I am not able to view the ESS,MSS configuration nodes in SPRO. Even i have activated EA_HR component field in spro under Activation Switch for SAP R/3 Enterprise Extension Set node.
But i am able to view the ESS customizing nodes through PTARQ t.code.
Kindly guid me, why i am not able to view the ESS, MSS nodes in spro.
we are into ECC 5.0, EP 6, Patch level is 85.
Regards,
Devi.

Devi,
PTARQ will suffice the need to configure ESS & MSS.
Still if you need to access through SPRO follow --> SPRO - Cross application components - Home Page framework.
or SPRO - Personnel Management - ESS.
Still if you dont find the nodes..check with BASIS n finally raise a ticket to SAP.

ESS & MSS Role

Hi Experts
How to map ESS & MSS roles to ECC 6.0 Roles in EP.
Say for example in ECC 6.0 we have a user A and User B.
User A have some addtional attributes and User B does not have it
How to map this two users in EP.
Thanks
Daya.
Edited by: daya damu on May 27, 2008 8:27 PM

Hi Daya,
You will have to do the user mapping,
It can be done in two ways,
1. Go to user administration and once you enter user A, you will have an option of "User mapping".
2. When you are logged onto the portal, click, personalize option and choose "User Mapping".
User mapping is basically done when the portal users and ECC users are different.
Let me know if you need any further clarification on the same.
Cheers,
Sandeep Tudumu

ESS & MSS Roles,UWL,Authorization

Hi
How to get ESS & MSS User,UWL,user Authorization in ECC to portal
Thanks & Regards
Vijay.

SSO Between Portal, Web Dynpro, and ABAP Systems
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8e7af2f11d5993700508b6b8b11/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
SAP Logon Ticket-based Single Sign-On
Please Go through This also,
http://help.sap.com/saphelp_nw2004s/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
KotiReddy

Prepare EP for ESS(MSS)

Hi, guru!
I'm prepare Portal for ESS(MSS)/EP <-> HR/ECC configuration.
HR:
ECC 6.0 sp14
all packages 600 sp14
EA-HR up to 603 sp10
EP:
nw7.0 sp14
for ess/mss deployed in additional:
SAPPCCUI_GP 600
SAP ESS 600
SAP MSS 600
BPERP5ESS14
BPERP5MSS14
BPERP5***14
BPERP5HRA14
BPERP5COM14
q: SAPPCCUI_GP 600 SAP ESS 600 SAP MSS 600 - ok? or up to 603?
Best Regards,
Vlad

if backend is on EHP4 then frontend should be on EHP4 as well
ie EA Hr 604 then sap _ess 603
check these
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=31476
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES

ESS & MSS users in ECC 6.0 into portal

Similar Messages

Maybe you are looking for