ESS, mySAPERP 2005, Portal, Installation, Architecture

Hello, I have a question about ESS, mySAPERP 2005 and Portal. We installed on one server a mySAP ERP 2005 (only AS-ABAP) and on a second server a Portal (with AS-JAVA, XSS, EP...). Some guys told me, that I have further to install a Java-Addin on th mySAPERP 2005 Server for the ESS-Deployment. Is that true? In my opinon the whole deployment could be done in the Portal.
Regards,
Alexander Türk

Hi Alexander
Basically the JAVA Add in installation is used for XI.
not sure but support only unicode installation.
if u have enough resources than u can plan for new J2EE server for ESS. (Separate Java installation)
but u also use ESS deploy on portal server with higher hardware resource.(memory RAM) and fine tune the server
so performance is best.
this all about company policy. so u decide what ever u want to use.
regards,
kaushal

Similar Messages

Cannot connect to new portal installation. PLEASE HELP!!!

EP6 on MS SQL with J2EE 6.2
When I connect with my browser to http://<fqn>:50000/irj, I receive the following:
Service Unavailable 503!
javax.servlet.UnavailableException: Initialization of Dispatcher failed
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:370)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:212)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$400(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:447)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:672)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:314)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1288)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
J2EE has been patched up to 4/11/05. It is the cluster installation, but installed on a single Win2003 server only, which also hosts SQL Server. SAP Support has verified the portal installation, but has yet to find the problem.
http://<fqn>:50000 displays the J2EE documentation and all the example apps work. I can telnet to <fqn> 50008 successfully. I can open the J2EE Administrator at 50004 with Administrator user blank password.
Not sure where to go from here. Any and all help is greatly appreciated.

MS Windows Server 2003, Version 5.2, Build 3790
MS SQL Server, Version 8.00.760
Java version 1.3.1_12
SAP J2EE Engine 6.2, PL 31
SAP EP 6.0, SP 1, Patch 2
This is a new installion. We have yet to connect to the portal. The
error is encountered when trying to do so at the address
http://<FQN>:50000/irj.
Here is the latest console log 2005_4_13_at_16_54_55_output.log
[OS: Windows XP] [VM vendor: Sun Microsystems Inc.] [VM version:
1.3.1_12-b03] [VM type:Java HotSpot(TM) Client VM]
SAP J2EE Engine Version 6.20 PatchLevel 92173.20 is starting...
Loading: LogManager ...
Loading: R3StartupManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: ConnectionsManipulator ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: PortsManager ...
Loading: LockManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service security ... done. (62 ms)
Starting core service p4 ... done. (
218 ms)
Starting core service monitor ... done. (188 ms)
Starting core service admin ... done. (250 ms)
Starting core service log ... done. (406 ms)
Core services loaded successfully.
Loading additionalservices:
Starting service httptunneling ... done. (31 ms)
Starting service jms ... done. (15 ms)
Starting service telnet ... done. (16 ms)
Starting service shell ... done. (78 ms)
Starting service http ... done.
(63 ms)
Additional services loaded successfully.
SAP J2EE Engine Version 6.20 PatchLevel 92173.20 is running!
PatchLevel 92173.20 April 11, 2005 14:43 GMT
Login :Element 1459975381 joined.    Wed Apr 13 16:55:33 PDT 2005

LDAP users Faicng Error While Accessing the ESS Iviews in Portal

Hi,
My Portal is SAP EP 7.0 SP20 And ECC 6.0 SP16.
UME users able to access the ESS MSS Iviews.But only one LDAP User only access ESS/MSS Iviews Other getting the Below error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator
Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
                at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
                at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:205)
                at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
                at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
                at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
                at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
                at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
                at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
                at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
                at com.sap.pcuigp.xssutils.navi.FcNavigation.onInit(FcNavigation.java:314)
                at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigation.onInit(InternalFcNavigation.java:358)
                at com.sap.pcuigp.xssutils.navi.FcNavigationInterface.onInit(FcNavigationInterface.java:145)
                at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface.onInit(InternalFcNavigationInterface.java:142)
                at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface$External.onInit(InternalFcNavigationInterface.java:278)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
                at com.sap.pcuigp.xssutils.roadmap.VcRoadmap.onInit(VcRoadmap.java:188)
                at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmap.onInit(InternalVcRoadmap.java:162)
                at com.sap.pcuigp.xssutils.roadmap.VcRoadmapInterface.onInit(VcRoadmapInterface.java:153)
                at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface.onInit(InternalVcRoadmapInterface.java:144)
                at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface$External.onInit(InternalVcRoadmapInterface.java:220)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
                at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
                at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
                at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
                at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
                at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
                at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
                at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
                at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
                at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
                at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
                at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
                at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
                at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
                at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
                at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
                at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
                at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
                at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
                at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
                at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193)
                at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
                at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
                at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
                at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
                at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
                at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
                at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
                at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
                at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
                at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
                at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
                at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
                at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
                at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
                at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
                at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
                at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
                at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
                at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
                at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
                at com.sap.pcuigp.xssutils.xssmenu.model.MenuModel.hrxss_Ser_Getmenudata(MenuModel.java:171)
                at com.sap.pcuigp.xssutils.xssmenu.model.Hrxss_Ser_Getmenudata_Input.doExecute(Hrxss_Ser_Getmenudata_Input.java:137)
                at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
                ... 76 more
Thanks & Regrads,
Subba Rao

Hi,
Now every user facing the same error while accessing ESS Iviews from Portal.
in ST22 Dump is created.
What happened?                                                                                |
Error in the ABAP Application Program
The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_XSS_CAT_BUFFER=============CP " in include
"CL_XSS_CAT_BUFFER=============CM00C " in
line 50:
""L_CATSDB" and "L_CATSDBCOMM" are not mutually convertible. In Unicode"
" programs, "L_CATSDB" must have the same structure layout as "L_CATSDB"
"COMM", independent of the length of a Unicode character."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
terminated because it has
|    come across a statement that unfortunately cannot be executed.
What we need to resolve the above issue.
Thanks & Regards,
Subba Rao

Queries related to Portal Installation

Hi All,
I have a few queries :
We hv installed EP 6.0 based on standalone Java 6.40 system.Wt is the meaning of SCS Instance no.during POrtal installation ? On wt basis does Visual Administrator takes 50004 port for its connectivity when we open irj site with port 50000? Lastly after Portal Java standalone installation two Instance services are formed in SAP MMC , what does these two mean and stand for and wt do they indicate ,secondly which is the cluster and which is the server one amongst the two.Revert to these queries at earliest as i need this info urgently.
Regards,
Saumya

SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
You could get a better response on an appropriate forum,I think.
You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could go through this
Must read</b>
Rgrds
Vineeth

Enterprise Portal Installation

Dear Expert,
I am New Implementation Consultant, i dont know how to follow the correct procedure. Please provide for us INSTALLATION GUIDE AND IMPLEMENTATION NOTES, AFTER INSTALLATION CONFIGURATION STEPS, DOCUMENT LINKS.
Thanks,
Selvarajs

Hi Selvaraj,
Please check the below help file and link on Enterprise Portal installation.
http://help.sap.com/saphelp_nw04/helpdata/en/22/e082410d4cbe0fe10000000a1550b0/content.htm
http://wiki.sdn.sap.com/wiki/display/EP/PortalInstallation,ConfigurationandCustomizationTips
Hope it helps.
Regards,
Raghu

ESS error in portal

Hi,
I get below error message when i click Employee Self-Service in portal.
"A critical error has occurred. Processing of the service needs to close. Unsaved data has been lost.
Contact your system administrator.
Area group ZSAPDEFAULTESS_ERP2005 does not exist."
I get this error message for languages other than English.
Could you please guide me what i need to check to correct the above error.
Thanks in Advance.

Hi Avadh,
Thanks for your guidance regarding ESS error in portal.
We found that the language entry for which we got error, was missing in production.
We added the language entry in table T7XSSSERARGBT and transported it to production.
But now we are getting an exception message as shown below.
"com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?"
I do not feel this error might be due to our transport in production.
So, please guide us what can be the reason for this exception.
Thanks in Advance.

Portal installation fails

Hi,
when i was installing portal...
i get the error
An error occurred during the installation of component sap netweaver '04 sr1>Netweavercomponents running on java>platform>portal installation.Check the logs
when i chcek the logs
"INFO 2011-06-03 13:59:02
Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2011-06-03 13:59:02
Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2011-06-03 13:59:02
Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\q0w9e9r8t7.1.xml.
INFO 2011-06-03 13:59:03
Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.1.xml.
INFO 2011-06-03 13:59:03
Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.1.xml.
INFO 2011-06-03 13:59:03
Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\keydb.1.xml.
INFO 2011-06-03 13:59:07
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'SAP_ALL\I056362' on host '.'.
INFO 2011-06-03 13:59:07
Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.html.
PHASE 2011-06-03 13:59:07
Prepare the installation program.
INFO 2011-06-03 13:59:09
Installation start: Friday, 03 June 2011, 13:59:00; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
INFO 2011-06-03 13:59:50
Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\java.log.
INFO 2011-06-03 13:59:50
Output of C:\usr\sap\F31\jdk1.4.2/bin/java -version is written to the logfile java.log.
INFO 2011-06-03 13:59:50
Execution of the command "C:\usr\sap\F31\jdk1.4.2/bin/java -version" finished with return code 0. Output: java version "1.4.2_11"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_11-b06)Java HotSpot(TM) Client VM (build 1.4.2_11-b06, mixed mode)
INFO 2011-06-03 13:59:50
Looking for SAP system instances installed on this host...
WARNING 2011-06-03 13:59:51
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (79), with parameter (SYSTEM\CurrentControlSet\Services\Firehk).
WARNING 2011-06-03 13:59:51
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Firehk' does not exist on the 'localhost' host.
WARNING 2011-06-03 13:59:51
The step lookForAlreadInstalledJ2EEEngine with step key EP_PORTAL_MAIN|ind|ind|ind|EP60|ind|0|EP60|ind|ind|ind|EP60|ind|0|lookForAlreadInstalledJ2EEEngine was executed with status ERROR.
Please help me in resolving this issue.
Thanks,
Sudhanshu

Hi,
> WARNING 2011-06-03 13:59:51
> Error 5 (Access is denied.
> ) in execution of a 'RegOpenKeyEx' function, line (79), with parameter (SYSTEM\CurrentControlSet\Services\Firehk).
You are getting Access is denied error. Make sure that you will give 777 access on installation directory.
Thanks
Sunny

Is there any list for out of the box portlets that come with portal installation.

Is there any list for out of the box portlets that come with portal installation?
Ramesh

Yes - it's in the online help, on the Learning About Your Portal : About Portlets page. Here is the content:
Portlets Created Upon Install
The following portlets (and their necessary portlet Web services and Remote Servers) are created when you install the portal:
Folder Expertise:This portlet displays the list of folders for which the user is an expert. It is added to the User Profile page by default.
General Information:This portlet displays the default Profile Page. It is added to the User Profile page default.
Managed Communities:This portlet displays the list of communities managed by the user. It is added to the User Profile page by default.
Portal Login:This portlet allows users to log in to the portal. You probably want to add this to the guest user's home page so that users can log in from the default page displayed when they navigate to your portal.
Portal Search:This portlet allows users to search your portal and access their saved searches. Users might want to add this to their home page for easy access to their saved searches.
The following portlet templates (and any necessary portlet web Services and Remote Servers) are created when you install the portal:
Community Links:This template is used by the portal to create portlets that display the links saved in a Community Knowledge Directory folder. To learn more about Community Links Portlets, see Community Links Portlets.
Content Snapshot:This template is used by the portal to create portlets that display the results of a Snapshot Query.
You can also install the following functionality as part of the Optional Enterprise Web Components:
[url[/url]Stored Content:This portlet template allows you to create portlets that display stored content that is periodically refreshed. You might use this type of portlet to display content that is resource-intensive or takes a long time to generate. To learn more about Stored Content portlets, see Stored Content Portlets.
[url[/url]XML Source:This portlet template allows you to create portlets that can collect XML content from an external source and display it in the portal as HTML. To learn more about XML Source portlets, see XML Source Portlets.

Portal Installation Errors

during the portal installation through RapidInstaller i am getting following errors at the ABAP UME screen and i am not able to sort out what the error message is all about
<b>Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=sap-epp SYSNR=00 GWHOST=sap-epp GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '172.17.16.191:sapgw00' not reached TIME Tue Dec 19 15:01:03 2006 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1</b>
please provide me some help and i thank you all in advance for the same

Hi Aijaz,
You can get the same at this location. Browse by Netweaver 04 or Netweaver 04s as per your requirement. you need a service market place user id for this purpose.
https://websmp208.sap-ag.de/instguides
Hope this helps.
Regards,
Venkat.
[Reward points if useful]

Does Visual composer requires enterprise portal installation?

Hi all,
Does Visual composer requires enterprise portal installation?
or can it be installed standalone and used standalone.
Also does Visual composer reuires BI-JAVA stack,
or can it run on BI-ABAP stack also
Thanks all,
Regards,
Robert

Hi ,
Thx Markus,
one more question...
Is VC a stand alone application/package by itself that does not require EP or does it come with EP.
Thanq.
Regards,
Robert.

FIM Service and Portal Installation Ends Prematurely

Hello All,
I'm in the process of setting up a new production FIM 2010 R2 server. I have already installed the FIM synchronization service and I was able to install this successfully.
I have already installed SharePoint services (WSS 3.0) and configured it for FIM. But when I try to install the FIM Service and Portal.
I keep getting and error that says " FIM Service and Portal Installation Ends Prematurely" with no other details. If anybody has any advice please let me know.
I have already installed everything on a stand alone box in a dev environment and it all works correctly however I am unable to now install in a production environment

Cameron is right - you should consider FIMService account nearly as normal AD account for user*
An installer account should be admin on the box, where you are installing FIMService and he should be sysadmin on SQL during installation of FIMService. An installer account should be other than FIMService account itself.
*FIMService account:
Lock down the Service Account
The service account should not be used by any other services or users. The account must not be used to logon interactively and requires no access to any additional resources beyond those granted during setup. The service account is used to provide the security
context for the MIIS service as it accesses resources on the MIIS server and the associated database. It also provides the security context for the execution of any rules extensions.
Lock down the service account to ensure no malicious user is able to sign in using its credentials and gain access to MIIS data. Configure Group Policies to lock down the account and restrict access to this account. Since the MIIS service only needs the account
to run as a service, restrict the account as follows:
Deny logon as a batch job.
Deny logon locally.
Deny logon through Terminal Services.
Deny access to this computer from the network.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
Good topic for a Wiki article:
http://social.technet.microsoft.com/wiki/contents/articles/23330.technet-guru-contributions-for-march.aspx
Thanks Dominic and Jose!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

BW7.0 workbooks precalculation without Portal installation

Hi all,
I am using BW7.0 without Portal installation.
As far as I know broadcasting cannot be used without portal installation for bw7.0 workbook.(If I am wrong,please correct me)
Can anyone help to suggest how can I realize BW 7.0 workbook precalculation without portal.
Many thanks!
Best Regards,
Maggie

HI Maggie
There are two ways
1.distributing workbook via email (I think you are looking for this option)
2. to portal
You need precalucation server set up for the same .But i'm not sure whether we need portal for the same ,There is very good Howto on the same. Request you to go through it.
These are some OSS checklist from the same PDF
Implement OSS Notes:
857739 (Solves connection transfer
issues)
855220 (Solves gateway issues)
929005 (Solves errors of 2
workbooks being scheduled at the
same time)
930507 (Solves errors of having 2
instances of Excel running on one
server)
929799 (Solves gateway issues)
932649 (Solves rfc issues with
timing of multiple workbooks)
935063 (Solves corrupt workbook
issue)
These are REQUIRED for
Broadcasting to work properly. If
youu2019re running BW 3.5 SP17
(NetWeaver 2004s SP7), these are
already included.
2. . Make sure you've downloaded and
installed latest version of
Precalculation Service
(BWAPSERV12_0-10002960).
When installing, make sure you have
full admin rights.
http://service.sap.com/bi
> Download
> Support Packages and Patches
> Entry by Application Group
> Support Packages and Patches
> SAP NetWeaver
> SAP NETWEAVER
> SAP NETWEAVER 04
> Entry by Component
> BI Precalculation
> BW ANALYZER PRECALC SERVICE350
> Win32
> BWAPSERV12_0-10002960.zip
As of this document, patch 12 is the
latest pre-calculation service for BW
3.5. Implement OSS Note 928491 to
install the latest fix to the precalculation
service post patch 12.
NOTE: You can just install this patch
as it is as a full install.
For more information about installing
and updating the Pre-calculation
Service, see notes 745206 and
744127.
Let me know if you need the same PDF
Thanks
Nerusu

Could you send me the ESS MSS Business Packag installation guide and confi

Could you send me the ESS MSS Business Packag installation guide and configuration steps . I wanted to learn ESS and MSS configuration steps
Regards
Jagan

Answer in Short = Yes I can.
Bu the study material is voluminous and cannot be attached so SAP has created a website with all the material in it here is the address: http://help.sap.com
You should find the site very very informative. Good Luck.
cheers

Portal Installation DVD's

Hi,
I want to install EP. I want to what the right DVD's are for Netweaver Application Server Java with oracle.
The installation document lists the DVD's required but the names are different on servicemarketplcae.
Can anyone tell me what are all the DVD's i need?
Regards
Cyrus

When you want to Install EP on NetWeaver, you cannot get the DVDs seperately for Application server and EP.
You should get the complete package of NetWeaver 04. It has all the DVDs for the portal installation.
Hope this helps,
Kumar

Portal Installation from behind the Firewall

Hi
I'm tryin to install portal but my db is behind the firewall , how to aolve this problem ???? i cant use tns connect string
here is what i have in my tnsnames.ora
IDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp)(PORT = 1610)(HOST = 192.168.0.2))
(ADDRESS = (PROTOCOL = tcp)(PORT = 1521)(HOST = 172.16.10.49))
(CONNECT_DATA =
(SID = dolphin)
(SOURCE_ROUTE = yes)
)

Hi
My firewall support SQL , because I can connect to my database from 9ias server outside the firewall but my problem is only with Portal Installation , because I cant use tns connect string , I can only use the server name and the port , and I can only connect using tns connect string because
I have added to entries one for my firewall
and the other one is for db ...
any help please

ESS, mySAPERP 2005, Portal, Installation, Architecture

Similar Messages

Maybe you are looking for