ESS not available in SPRO

Hello,
I have configured ESS in developement and QA, but when I was going to make sure everything was fine in production I can't find the SPRO entries inside personnel management. The same thing happens with the SAP Learning Solution....SPRO entries are not there.
What is missing?

What's missing? Hmmmm....a simple search of this forum for one. =)
Past that....you MUST activate the EA-HR extension in the IMG. (it's the top node or so up there...BASIS folks usually handle this....or end up doing it later when told to do so by us yet again! haha)
Enjoy!

Similar Messages

Work Clearance Management (WCM) not available with ECC 6.0

Hi All,
Work Clearance Management (WCM) is a part of SAP Plant Maintenance (PM). It is a standard functionality. This is not available with our installed version of ECC 6.0 system.
The navigation should be
SAP Easy Access > Logistics > Plant Maintenance > Work Clearance Management.
This is also not available on SPRO.
But whenever we directly enter the T Code related to WCM, it allows me to go to that screen. But if we want to customize the WCM using the same method then the SAP standard configuration is missing.
I need to get this functionality available on our system.
Is it a part of SAP software component SAP_APPL ?
But how do I get this ?
Can anyone pls help me on this ?
Thanks and warm regards
Purnendu

I think that WCM it's present as an extension set (i'm not quite sure if is EA-PLM or EA-SCM). When you configure it, the activities related in custominizg, will appear as well.
Hope this help
Ezequiel

Create a Service for ESS if standard service is not available

Hi Folks,
How can I create a link in resources if standart resources are not available in ESS?
Thanks!

Hi David,
To create a resource you need to go to Homepage Frame work from SPRO -> Cross Application Components
But make sure that before creating the Resource in R/3 you have created an iView or Page or Workset since when are creating the resource you also give the URL of the PCD.
Regards
Vijay

ESS/MSS - Error " 404, The requested resource is not available."

Hi
I have deployed below archives in the EP 7.0 SP14 system. My back end system is ECC 6.0 with SP14.
1)BP ERP05 ESS 1.0 with sp14
2)BP ERP05 MSS 1.0 with sp14
3)SAP ESS 600 with sp14
4)SAP MSS 600 with sp14
5)SAP PCUI_GP 600 with sp14
We are getting " The requested resource is not available." error after clicking on
Working Time tab.
Can anyone suggest me whether i need to update any higher level patches from EP and ERP side ?
Or what could be the problem ?
Thanks in Advance,
Vinay

Hi Vinay
Check below steps one by one for your application.Whch is very helpful link.
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
Regards
-SS

MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

Hi Gurus
while doing MIGO and part 1 posting am getting following error
MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
kindly help in this
Maruthi

hi
check all settings in J1ID
or
in po did u got ur all values correctly for excise cess and hcess
if yes then check ur vendor excise details in j1id
if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
regards
kunal

Field DESC_LANGUAGE is not available in structure CRMT_ORDERADM_H_COM

I get the following warning message when I create a CRM ticket from trx notif_create.
Field DESC_LANGUAGE is not available in structure CRMT_ORDERADM_H_COM (CRM_ORDER_MISC001)
I have been looking in notes, forums and google but no help.
Could someone point me the right direction how to fix this, since the user does not get the confirmation of the ticket beeing created nor the number of the ticket.
I have copied standard trasnacion SLFN to ZLFN with all its profiles and headers, and activated it in DNO_CUST04 y in SPPFCADM.
Please advise.

Hi I have too problem, but don't assigment SAP Component in Message Support SLFN.
What procedure in DNO_CUST04.
System: SP HP1
I Have follow note 824640.
See you cheklist:
Solution
For point 1: You cannot determine a new process type.
If you use an alternative process type instead of SLF1 (the default until Release 3.20) or SLFN (the default as of Release 4.00), this must be entered as follows:
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: PROCESS_TYPE
Enter the description: Message Type
Enter the field value: SLFN (SLFN is an example of a new process type)
Choose Save.
OK.
For point 2: An external IBase ID is to be used.
If you use a different external IBase ID instead of SOL_MAN_DATA_REP (the default), this must be entered as follows:
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: IBASE
Enter the description: External IBase ID
Enter the field value: EXT_IBASE (EXT_IBASE is an example of an external IBase ID)
Choose Save.
OK
For point 3: The contact person is not transferred/displayed.
When you create a Service Desk message, you specify a contact person, whom the system does not display in the message.
Quando vc cria uma mensagem, vc especifica uma pessoa de contato, o qual o sistema não mostra na mensagem.
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: NO_USER_CHECK
Enter the description: No Existence Check for User
Enter the field value: X
Choose Save.
OK
For point 4: Transaction NOTIF_CREATE does not start and the system issues no error message.
Call transaction SOLUTION_MANAGER or DSWP.
Choose: Edit -> Global settings.
Maintain your Solution Manager release accordingly:
3.1: Configuration guide 3.1 -> 4. Setting Up the SAP Solution Manager -> General Settings for the SAP Solution Manager
3.2: Implementation Guide -> Solution Manager -> Basic Settings -> SAP Solution Manager System -> Connection to SAP -> Assign User to Forward Service Desk Messages
OK
For point 5: There is no Service Desk - RFC connection for the Solution Manager.
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: RFCDEST_SOL_MANAGER
Enter the description: RFC connection for Solution Manager
Enter the field value: RFC connection from transaction SM59 or NONE for local system
Choose Save.
OK
For point 6: There are SAP components missing in transaction NOTIF_CREATE.
In transaction NOTIF_CREATE, no values are displayed for the components in the F4 help.
Call transaction SOLUTION_MANAGER or DSWP.
Choose: Edit -> Get SAP components
or start the program DSWP_GET_CSN_COMPONENTS.
Call transaction SE38.
Enter the program DSWP_GET_CSN_COMPONENTS
Choose Execute (F8).
OK
For point 7: Separate/changed partner function for contact person and/or person responsible
When you use separate partner functions, you must enter the
following user settings:
Releases up to Release 3.10 / 3.20 (Support Package 15) or Release 4.00 (Support Package 10)
If you have a separate partner function for the contact person:
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: PARTNER_FCT_DESC_CREA
Enter the description: Separate Partner Function for Contact Person (CREA)
Enter the field value: Enter the value you used as an abbreviation when creating your partner function (see comment below).
Important: You must enter the field value in uppercase letters.
Choose Save.
OK
If you have a separate partner function for the person responsible:
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: PARTNER_FCT_DESC_PROC
Enter the description: Separate Partner Function for Person Resp (PROC)
Enter the field value: Enter the value you used as an abbreviation when creating your partner function (see comment below).
Important: You must enter the field value in uppercase letters.
Choose Save.
OK
Releases as of Release 3.20 (Support Package 16) or Release 4.00 (Support Package 11)
If you have a separate partner function for the contact person:
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: PARTNER_FCT_CREA
Enter the description: Separate Partner Function for Contact Person (CREA)
Enter the field value: Enter the partner function you used for the contact person (see comment below).
Important: You must enter the field value in uppercase letters.
Choose Save.
CHECK
Not used
If you have a separate partner function for the person responsible:
Call transaction DNO_CUST04.
Choose New Entries.
Enter the field name: PARTNER_FCT_PROC
Enter the description: Separate Partner Function for Person Resp (PROC)
Enter the field value: Enter the partner function you used for the person responsible (see comment below).
Important: You must enter the field value in uppercase letters.
Choose Save.
CHECK
Not used
Comment: To maintain or display your partner functions, use transaction CRMC_PARTNER_FCT or transaction SPRO -> SAP Reference IMG -> SAP Solution Manager: Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Service Desk -> Partner Determination Procedure -> Define Partner Functions.
Important: Since these entries are language-dependent, you have to maintain or change all of the languages you use in your system.
For point 8: The short text is too long when you create a message.
When you create a Service Desk message in a component system (enter using Help -> Support Message), the short text is too long (60 places) and the system truncates it in the message overview (transaction CRM_DNO_MONITOR) and in the transaction for message processing (CRMD_ORDER).
See Note 838063.
CHECK
Not Used
For point 9: Generate IBase components automatically
As of Release 4.00 (Support Package 15)
To be able to generate IBase components automatically when you create or change systems in the SMSY, you have to create the following Customizing entry using transaction DNO_CUST04.
Enter the field name: IB_GEN_AUTO
Enter the description: Automatic IBase Generation
Enter the field value: Blank character or X
Blank character = Automatic generation is switched on
X = Automatic generation is switched off
Not used

Provisioning log is not available on Access request type Change Account

Hi,
So I have and issue when I try to submit a request to add a role to a user and I'm trying to understand what could be the reason for it. Basically I have a workflow that works perfectly for a "Change Request". I can see that all the steps are executed and then at the end of the request when is suppose to do the actual role assignment I see the message "Provisioning log is not available" then the approval path is finish and the request is closed but when I take a look at the user in the back end the role is not assign. In terms of access I have try giving SAP_ALL to WF-Batch, nothing shows in Yellow or Red on SLG1 and in SPRO->AC-> User Provisioning -> Define request Type I see "Change Account" with SAP_GRAC_ACCESS_REQUEST. What else can I do to troubleshoot this error?
Note: I when back to the to the AC 10.0 Pre-Implementation From Post-Installation to First Access Request and everythings looks right in terms of the AC Configuration settings.

Hi Jonathan,
In my question I was referring to SPRO - GRC/access control/user provisioning / maintain provisioning settings. Those need to be setup (min. global provisioning settings) in order to have role being assigned to user at the end of path.
Change account option you can see under request type is referring to change user master data(e.g. password/ account validity / details).
Is this system maintain by CUA? If so settings have to be different (see CUA settings in SPRO)
I would recommend moving to SP14 as in SP13 there were many bugs, by the way I believe the worst SP ever since beginning of AC is SP13 (maybe due to number), as it destroys many working functionality.
Filip

Node text not found in SPRO

Hi All,
In SPRO transaction Time Management-->Web Applications->leave request(new)-> node text not found
I am not able to find all the three subnodes under the node leave request (new)
It is displayed as node text not found .whenever we execute these nodes it gives out an error as "there are no executable transactions assigned to this node".
These nodes are available in the development server but not available on test server.we have already activated the BC sets through SCPR20 and found the activation log successful for all EA-IMG, EA-AKH,EA-MENU.
Also activated the switch EA-HR.and ours is not an upgraded system(.4.7)
Please Help to the earliest possible as it is very urgent for us.
Points guaranteed.
Regards,
Jyothi.R

Hi Julian
Did you check whether all the upgrade program ran successfully? Also can you please let me know when exactly you get the message ?
Thanks
Debraj Roy

Node not found in SPRO IMG

Hi All,
In SPRO transaction Time Management-->Web Applications->leave request(new)-> node text not found
I am not able to find all the three subnodes under the node leave request (new)
It is displayed as node text not found .whenever we execute these nodes it gives out an error as "there are no executable transactions assigned to this node".
These nodes are available in the development server but not available on test server.we have already activated the BC sets through SCPR20 and found the activation log successful for all EA-IMG, EA-AKH,EA-MENU.
Also activated the switch EA-HR.and ours is not an upgraded system(.4.7)
Please Help to the earliest possible as it is very urgent for us.
Regards,
Jyothi.R

Hi, If the client where you have the problem has been copied from a different one, it may be a problem with the translation of texts:
Check this note :
Texts of hierarchy enhancements not transported
SAP Note Number: 204433
Symptom
Enhancements were added to a hierarchy (for example area menu) whose language is not the original language of the hierarchy. In the system in which the enhancements were added, all entries are displayed correctly. After a transport to a different system, the texts of the added enhancements are missing in this system. In the display or maintenance of the corresponding hierarchy the message 'Node text not found' is issued. In the Easy Access no message at all is displayed.
Additional key words
Area menus, enhancements, transport, IMG
Cause and prerequisites
Due to a program error, the texts of a hierarchy are only transported in the original language even if enhancements were made in other languages.
Solution
Implement the attached correction.
Regards
Jose Luis Valverde

AC20000027 - Element PURCHASINGCONTRACT is not available in the container

Hi Experts,
I created the simple WF. Start event - RELEASESTEPCREATED, object - BUS2012. WF have one step, task - "TS20000166 Release of purchase order". When I start my workflow in test run the status is set to "error" - "Element PURCHASINGCONTRACT is not available in the container", Message no. OL356.
Testing the WF in transaction SWUD don't found any errors.
Can anybody help me with this?
Thanks a lot,
Andrei

Hi Andru,
I worked on Release strategy for PO.
I am SURE the Problem is with RULE, RULE is not returning any agents.
The problem is that the rule (20000027) your using is not returning any agents.
1. Just go to transaction PFAC and enter the RULE. go to display mode.
Click on the second button in the application tool bar (SIMULATE RULE RESOLUTION - shift + F8 ) a popup sort of screen will be displayed.
Now enter the PO number and Release code.
Execute the DETAIL button in the middle of the popup screen.
See if the rule is returning any agents.
2. If the above mentioned test is successfully executed,
Check in your workflow SWDD.
Open your workflow.
Double click on the RELEASE CODE workflow container element.
Check if the structure defined under D.Type is - T16FC and Field is - FRGCO.
3. If even the 2nd point is correct,
Check the binding for the step '0000000004'
In the binding, Pass the Busines Object BUS2012 (Purchase order) and RELEASE CODE (T16FC-FRGCO) that are present in the Workflow container. and check if they both are import and export parameters.
3. You are sure that the agents are specified in SPRO (under Material management >> PURCHASING >> Purchase order/CONTRACT >> Release Procedure for PO/CONTRACT >> Define release procedure for PO / CONTRACT >> WORKFLOW )
If you double click on WORKFLOW, you will see that the AGENT IDs are assigned to the Release Group and release codes of Purchase Order.
Eg: Release group       Release code Agent Type        Agent ID
            01                          L1               US                SAPUSER1
            01                          L2               US                SAPUSER2
            01                          L3               US                SAPUSER3
            01                          L4               US                SAPUSER4
Try all this and tell me the result.
Regards,
Gautham Paspala

FF ID is not available in GRC system.

Hi All,
i have configured FF in GRC system and have dine following activities
1. maintain connection setting in SPRO.
2. created FF id in ECC system and assigned FF standard role.
3. run all necessary synchronization job.
4. assign owner.
but FF id is not available in GRC system.
can you you please help me.?

Hi Alessandro,
Thanks for your replay. please find my configuration in details.
1. Parmid 4000=1,
4010=SAP_GRAC_SPM_FFID
2. Maintain maintain connection SUPMG in SPRO > GRC > Common Connection Setting > Integration Framework > Maintain Connection Settings.
3. Create FFid in ECC DEV system.
4. assign role SAP_GRAC_SPM_FFID to FFid.
5. create FF id owner and FF id controller.
6.Run Syn.
but when want to assign controller to the FF ID then found FF is not available.

SAP GRC 10 SP13 PC- AM scenario not available for assigning to connector

Hello Expert,
We are on GRC 10 SP 13 PC . We want to add connector to AM connector group under SPRO-GRC_Common Componenet Setting - Integration framework - Maintain Connector and Connector types - Define Connector groups.
I remember all other groups ( AC related) which are available in this area are coming because of activation of BC sets. I have activated all the BC sets related to PC but AM group is not available.
Any Suggestion?
Kind Regards
Asheesh

Hello Asheesh,
AM Integration scenario is available in next path in SPRO.
SPRO -->GRC --> Common Component Setting - Integration framework -->Maintain Connection Settings
Regards,
Gowrinadh

Page not found or not available

Hi All,
I am using ESS/MSS. While generating reports I am getting an error.
In MSS , I am able to select the report in first step and in second step I am able to define selection criteria. But when I try to get
report results( as results will be shown in a seperate window) it is showing as page not found or not available.
I have checked the authorization and it is fine. The service is also running fine. But in portal I am facing this error.
Can anyone help me in this.
Thanks!
Swarnaprakash

Hi Lukas/Siddarth,
Thanks for the suggestion.
I wanted to tell one more information. Few days back in HR side they did patch upgrade.Please suggest what are the things shud I check
This is the log I got from NWA
Error looking up url: portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.mss.hcm.rpt.iac
[EXCEPTION]
com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.mss.hcm.rpt.iac)
at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:72)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1060)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.sapportals.portal.pcd.pcm.roles.RoleNavigationConnector.getNodes(RoleNavigationConnector.java:286)
at com.sapportals.portal.pcd.pcm.roles.RoleNavigationConnector.getNode(RoleNavigationConnector.java:160)
at com.sapportals.portal.navigation.cache.connector.CacheNavigationConnector.getOriginalNode(CacheNavigationConnector.java:941)
at com.sapportals.portal.navigation.cache.connector.CacheNavigationConnector.getNode(CacheNavigationConnector.java:790)
at com.sapportals.portal.navigation.NavigationService.getNavNode(NavigationService.java:1611)
at com.sapportals.portal.navigation.NavigationService.getNode(NavigationService.java:579)
at com.sapportals.portal.navigation.cache.CachedNavigationService.getNode(CachedNavigationService.java:156)
at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentNavNode(NavigationEventsHelperService.java:688)
at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentLaunchNavNode(NavigationEventsHelperService.java:745)
at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentLaunchNavNode(NavigationEventsHelperService.java:731)
at com.sapportals.portal.navigation.workAreaiView.doContent(workAreaiView.java:136)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Campaign Type is not available in drop down box

Hi expert,
I want to bring a new camaign type option in drop down box in web UI. in spro i define a new Campaign type(spro-crm-marketing- marketing planning and campaign management basic function---define types/objective/tactics).
but this new capaign type is not available in web ui campaign drop down box. actually i want to create a new campaign type fund management to add fund management functioanlity in Campaign.
please help to do this.
thanks in advance.
regards,
dur

Hi Shruti and Anup,
Thanks for giving focus to my question. i have maintained the cateogory Campaign in SPRO and also language is EN in description.but i am creating a new campign type for marketing plan it is available in drop down box. and i also want fund and id available in general dat area in either campaign or marketing plan.How can i achieve it?
thanks
dur

Page not found or not available error

Dear Team,
In Approval list for UWL screen while clicking on the record for travel request or travel expense it should actually display form to show the details of either travel request or travel expense but it not displaying the form instead it is showing the error "page not found or not available " . Even i clicked on Display form button it is showing the same error it means i am unable to open the form .
Please help to find the solution.
Thanks and Regards

HI
IN the default trace i found the following
Error looking up url: portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.tripform
javax.naming.NameNotFoundException: [Xfs] Object not found: com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.tripform at portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses [Root exception is javax.naming.NamingException: [Xfs] Object not found: com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.tripform at portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses]
Please help .
I checked the permissions there is no issue with it .
Thanks and Regards,

ESS not available in SPRO

Similar Messages

Maybe you are looking for