ESS Payslip error : Form ZF01 does not exist

Hi,
We have created a form in PE51 that is ZF01 and include IMG.
But we r getting the following error message:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZF01 does not exist
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
     at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
Regards
Anumit

Did you have to configure anything else in the img like the badi:define settings or the provide salary statement as pdf. We are past the form doe'n't exist, but we are getting a similiar message.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when calling method INIT of class CL_HRXSS_REM
Can you help.

Similar Messages

Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"

Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PM

Hi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey

View Paycheck Stub Error: (Form xyz does not exist)

Hi Portal Knowledgeable ones,
I am running EP 6.0 SP 13. My SAP target is ECC 5.0.
I have a problem in the ESS application. When I attempt to view the paycheck stub for any employee, the portal returns the error:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZCHK does not exist
Form ZCHK is our custom paystub form.
Thanks,
Kevin


Had to include form via IMG.

Every time I launch Firefox it pops up an error stating "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem."

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

ESS Error - User id does not exist

Hi All,
When the user click on personal information - Emergency address link on the portal, user gets error "user XX does not exist in this period".
This proble is only for this particular user.
on the back end an abap dump with following error message is encountered.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
I checked the data is maintained in IT0105 an IT0002 correctly. Even the table V_T7XSSPERSUBTYP has value for IT0006 with correct usecase.
The user has a hiring date of 13.07.2009 and IT0105 also has the start date as 13.07.2009 can this be the reason? Since the validity is not for complete month?
Please advise what could be the possible reason for the above error. How to solve the problem
Regards,
Swati

Hi,
you have to map the EP user to an employee at the backend for the ESS services to work.
Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
This will solve the issue.

Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.

We are on mySAP ERP 2004, and using ESS 60.2 version.
In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
"Service EMPLOYEE_ORGCHART_SERVICE does not exist".
Has anyone come across this?
Any suggestions on how to fix this is highly appreciated with points.

Hello John,
The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
Service Short Key - EMPLOYEE_ORGCHART_SERVICE
If its not there then you need to create one entry like this:
Service Link Text    Orgchart
Service Type         WebDynpro application
Link Resource       EMPLOYEE_ORGCHART_SERVICE
Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
This entry will have following details if its exists(else create with following details):
Resource Key         EMPLOYEE_ORGCHART_SERVICE
Description     Orgchart
Server
Directory Path sap.com/ess~org
Object Name     Orgchart
URL Parameter
Window Name          Orgchart
Window Properties
URL for PCD Page:
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
After maintaining these entries it should work.
Regards,
Shubham

Portal Application - Form [Error: Path ID does not exist. (WWC-50001) ]

Hi,
I have created a table as like below to hold pictures on the
database.
SQL> create table img_store
(iname varchar2(20), picture BLOB);
Using Oracle Portal-> Application-> create new 'FORM' based on
table, an "Upload Image Form" was created as a portlet.
The form allow to browse images which you want to upload into
database, but when i click on 'Insert' button after browsed the
image to store the image path to the column, an error message
displayed:
Error: Path ID does not exist. (WWC-50001)
Anyone can advice to me on this? Thanks.
Regards,
Sherlyn

hi chrigel,
i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
thanks,
christian

Form HR_SGTAXIR8A2002 does not exist

Hi,
When I try to run the IR8 form from Portal ESS I get the following exception:
"Form HR_SGTAXIR8A2002 does not exist"
It is a sapscript form. I used se71 and activated the form (but first I copied it from 000 because it was not available in our client). The language EN seems to be ok.
1. Am I missing some steps for activation?
2. Where can I see the program/transaction where this form is used? Is there a configuration table containing the sapscript forms and associated programs?
Any help is appreciated.
Thank you,
Adalbert
PS: I know what report the Portal is calling: RPCT8AR0_01. The report did run fine in R3 from the beginning. The problem is that the report is NOT running in the portal even with all the IMG config done. Strangely, RPCT8AR0_01 never asked for HR_SGTAXIR8A2002 (I had to copy it from 000) even if the sapscript form was not in our client before the copy.
After some debugging in se37 of HRXSS_SG_IR8A_GET_PDF I see that the report is looking for the form definition in table STXFADM. The form is not in the table (but I can edit it with se71). How can I get the form in this table?
Message was edited by: Adalbert Kovacs

1. Yes, I get the error after using SE71->Utilities->Copy from client.
2. I am not familiar with "driver programs" but I checked the following tables:
- STXFADM
- TNAPR (I think this is for Smartforms actually)
I don't have the form in any of these two.
So, to reformulate the problem, the error is generated by a missing entry in table STXFADM. This is a sapscript form, not a smartform. What is the table STXFADM used for and how can I add my form to the table?
Thanks,
Adalbert

Firefox/3.6.10 shows message whenever I click on an icon needing Internet access, saying 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist' and advising me to contact the author - ???

Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????

https://support.mozilla.com/en-US/questions/756907

Career and Job Error - Area EMPLOYEE_CAREER_ERP2005 does not exist

Hi Experts,
We are getting following error while click on Career and Job tab on ESS. We checked in Table V_T7XSSSERARB. Entry is maintained.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
Would appreciate kind guidance on this.
Thanks,
Aashish

Waiting for experts comment. We checked services are defined in iViews,Pages,Roles and WorkSet but couldn't resolve issue. Entry also exist in SAP configuration.
ERROR IS AS FOLLOWS :
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:235)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
Would really appreciate kind guidance.
Thanks,
Aashish
Edited by: Aashish Brahmbhatt on Oct 2, 2008 10:08 PM

Error: Path ID does not exist. (WWC-50001)

when i try upload a binary file via table based portal-form then i get the
Error: Path ID does not exist. (WWC-50001)
The problem is: It was working for three times and then never.
tips in this direction was be very helpfull.
Thanks
Mehmet Celikaslan
null

Thomas,
This is bug # 1689009, it is fixed in 3.0.9 release. The only workaround I have is to edit the generated form package and manually remove/comment all calls to wwdoc_api.remove_document in upload_XXX procedures.
Thanks,
Dmitry

Help I need help. i get this message'Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.' How do i fix this?

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
Well that is the message i get. I can still use firefox(version3.6.8)

You get that error if an extension is using an old and no longer supported method to install a plugin.
Which plugin are you trying to install?
See also http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

Fatal error: Area EMPLOYEE_TRAVEL_ERP2005 does not exist:

Hi,
I am getting the following error, when go to T&E page in ESS.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_TRAVEL_ERP2005 does not exist
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:235)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.pcuigp.xssutils.navi.FcNavigation.onInit(FcNavigation.java:312)
     at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigation.onInit(InternalFcNavigation.java:358)
     at com.sap.pcuigp.xssutils.navi.FcNavigationInterface.onInit(FcNavigationInterface.java:145)
     at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface.onInit(InternalFcNavigationInterface.java:142)
     at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface$External.onInit(InternalFcNavigationInterface.java:274)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.pcuigp.xssutils.roadmap.VcRoadmap.onInit(VcRoadmap.java:188)
     at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmap.onInit(InternalVcRoadmap.java:162)
     at com.sap.pcuigp.xssutils.roadmap.VcRoadmapInterface.onInit(VcRoadmapInterface.java:153)
     at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface.onInit(InternalVcRoadmapInterface.java:144)
     at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface$External.onInit(InternalVcRoadmapInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
I checked the backend R3 & found the Area. But still I get this error in Portal
Urgent help is needed , thanks in advance.
Thanks You,
Ravi

Were you able to find anything out? I'm having the same issue.

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

ESS Payslip error : Form ZF01 does not exist

Similar Messages

Maybe you are looking for