ESS Payslip is not swoinf in portal

Hi
I have a problem with ESS - Payslip. Problem has started with after deleting a variant in R/3 by some one. Now if I input the correct data and run the same, payslip is coming fine in R/3. But it is not showing correctly in Portal. Is there any variant configuration can be done at Portal? Also there were no changes for the past 5 months in Portal side. However we have restored the variant with different name.
Can some one provide sol...?
Points will be awarded...
Regards
Swarna

Hi,
Try creating new iview.
May be some thing wrong with the application but nothing to do with portal.
Thanks,
gopal

Similar Messages

ESS Payslip - Unable to view in Portal after changing the variant in R/3.

Hi
Unfortunatly, someone was deleted a variant in R/3 for Payslip. So I have created a new variant in R/3 and am able to see my Payslip perfectly in R/3. But If I try to view the same Payslip ( for any month ) in Portal it is showing nothing.
I feel that this was happend due to that variant in backed missing. I know there is a property been set to that variant in repective iView.
Now I want set my created variant in Portal. Where exactly I have to add this variant in Portal ( iView) and how?
Regards

Have u set the required customisations in backend.
Normally when u see the payslip in ESS, it shows not for the current month its shows one month prior's salary slip so try generating a salary slip for previous month.
Regards,
--VP.

ESS, MSS node not displaying in portal

Hi,
I am not able to view the ESS,MSS configuration nodes in SPRO. Even i have activated EA_HR component field in spro under Activation Switch for SAP R/3 Enterprise Extension Set node.
But i am able to view the ESS customizing nodes through PTARQ t.code.
Kindly guid me, why i am not able to view the ESS, MSS nodes in spro.
we are into ECC 5.0, EP 6, Patch level is 85.
Regards,
Devi.

Devi,
PTARQ will suffice the need to configure ESS & MSS.
Still if you need to access through SPRO follow --> SPRO - Cross application components - Home Page framework.
or SPRO - Personnel Management - ESS.
Still if you dont find the nodes..check with BASIS n finally raise a ticket to SAP.

Push button ijn appraisal showing in backend but not showing inn portal

Hi Expert,
I would like to ask that push button in appraisal while configuring ESS/MSS package.
It is showing in backend, but not showing in portal.
Request you to give your inputs to bring push button on to the portal.

Hi,
are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
Regards,
Ana

How and Where to change ESS payslip property as READ only Mode

Hi,
We are SAP ECC5.0 and using EP6 for ESS payslip. We have a problem
launching ESS payslip for those employees who have Acrobat Editor and
Reader installed. One can actually change the payslip information via
Acrobat Editor when click onto PRINT button.
However, for those without Acrobat Editor installed in the PC, we do
not have such problem. Please advise how to resolve this.
Was told to change ESS payslip property as READ only Mode. Unable to find this in the configuration setting.
Thanks.

You may further look at the following help link:
http://help.sap.com/saphelp_nw04/helpdata/en/97/ccfc3f0ac2c642e10000000a1550b0/frameset.htm
If it helps, pl do reward.
Thanks
Narasimha

Call the ess payslip application using a URL

Hi
i want to
1. call the ess payslip application using a URL
2. and pass PERNR as parameter to this URL so that the salary slip displayed is for that particular PERNR.
i am able to get the payslip application through URL.
Now how to acheive point no. 2 ?
Regards
Rajendra
Edited by: Rajendrakumar Gaikwad on Dec 30, 2008 11:55 AM

Hello
If this is not possible , let me know which BAPI it is calling to create the pdf
so that i will create a application to call the BAPI itself and pass PERNR .
Regards
Rajendra

ESS Payslip : Error when creating a form

Hi Experts,
Please help me on this issue.
The payslip is not getting generated in QA portal. I have checked everything, feature, report variant. The payslip is getting generated from the back end.
But I have not checked from PZ11_PDF, becz of authorisation issue.
Can anyone guess what could be the problem?
thanks
Jay

Here is the error
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Error when creating the form
Error when creating the form:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
     at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

ESS tab does not show up after deploying ESS

We did every configuration step for ESS and we had no issue before for other projects.
However this time ESS tab does not show up on EP even the roles are assigned.
ALL Jco tested OK.
What could be wrong?
Thanks for your help.

Jose:
Thanks!
I think I miss
BP_ERP5ESS
BP_ERP5MSS
Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
Could you tell me what version of
BP_ERP5ESS
BP_ERP5MSS
should be applied to the EP7.01?
Follow up:
Jose: I do see the BP at the same Wiki:
BP ERP05 ESS 1.41 SP04
BP ERP05 MSS 1.41 SP04
BP ERP05 COMMON PARTS 1.41 SP04
I am going to apply them on the portal. Do you agree? Thanks again.
Thanks!

Application not working on Portal

Hi,
I have a query regarding one of the application. The application is a transactional app like creating a new supplier/material.
When i execute the application from backend ECC, it is running fine but the same application is not working on Portal.
The application is working fine from NWBC as well. The problem is that the application navigation is not happening when i click on Create and throwing below errors. Please suggest at the earliest.
com.sap.portal.appintegrator.sap.Generic::Generic/ConnectionLayer
MandatoryParameters
OptionalParameters
                     SAP_LocalSystem                     DE1CLNT110                     DE1CLNT130                     DF1CLNT100                     DG1CLNT100                     SAP-GRC                     SAP-GRC-AC                     SAP_BI                     SAP_ECC                     SAP_ERP_Common                     SAP_FMDM                     SAP_GATEWAY                     SAP_GRC                     WebEx
Authentication
DebugMode
                     No                     Yes
                     GET                     POST
Regards,
Yuvraj

Hi Yuvraj,
Well, as it turns out.. we're at SP12 and this note does not apply for us. It's not really a solution for our system and we're still looking for the reason for this behavior of the portal.
On the other hand, you've opened this thread and you are the only one who can award points and mark certain solution as correct
Regards,
Boris

WEBGUI is not working in portal

Hi
I had conected to production server and created Transactional Iview with SAPGUI for WINDOWS and running it successfully.
My aim is to make use of SAPGUI for HTML in the place of SAPGUI for WINDOWS.
So i had activated ITS services successfully and the URL is working fine.As i am using integrated ITS i checked with the fallowing URL.
http://server:port/sap/bc/gui/sap/its/webgui
It had shown the screen of SAP WEB Application Server with portal SID and asking for credentials. after proving the credentials its showing SAP screen successfully.
Now i had changed SAPGUI for HTML in transactional IVew and getting the same screen succesfully. as it ask for SAP user Id pwd. i had entered the same credentials wat i had entred earlier during the test. Now its showing an error like
<b>Client, name, or password is not correct; log on again .</b>
what could be the problem ?why its not working in portal while working fine with URL ?
Please guide me .

Hi
U Need to enable SAPGUi for html
goto se80 give internet services (in the drop down box)
Below drop down give SYSTEM publish these service by right clicking system publish--complete service.
and also publish same way WEBGUI
Check SAP Note 698329
Hope this helps you.
Regards
Krishna.

BW query not working in portal

Hello Experts,
We have this issue when we have a BW query which is running well in RSRT but the query is not working in Portal.
The error message we have is
User when running the report is getting the error message “Error in File SMT-0454 - Contribution Analysis (Cx) : Error in formula Running Total Condition Formula: 'HierarchyLevel (GroupingLevel ({YPAXXM01_YPAXXM01_QC001.[YGLSUBBRD GSK1CXBRNDCATH]-NodeId})) = 1' This field name is not known..”
Explored the possibilties , Could this be issue with BW query.
We have this query getting fed to BO's. Please advise.
Thanks,
Santhosh

Hi Santhosh,
Error... This field name is not known, check your formulas in query, there might be some changes happenened with the characteristics used in formula.
Check the formula by going up to base level, you might removed some field ex: YGLSUBBRD from your query. Repair it appropriately.
Hope helps - Kumar

IF_FPM_WORK_PROTECTION is not working in portal

Dear Experts.
IF_FPM_WORK_PROTECTION is not working in portal . Which i have re-implemented in my Z-Wdp Component and in IS_DIRTY( ) method, following is the code which i have written.
ev_dirty = abap_true.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_portal_manager TYPE REF TO if_wd_portal_integration.
lo_api_component = wd_this->wd_get_api( ).
lo_portal_manager = lo_api_component->get_portal_manager( ).
CALL METHOD lo_portal_manager->set_work_protect_mode
EXPORTING
mode = if_wd_portal_integration=>co_wp_mode_application_only.
lo_portal_manager->set_application_dirty_flag( dirty_flag = ev_dirty ).
The scenario is : I have CANCEL button on my screen. And on click of that button,It is triggering go data loss popup.But on click of OK in that popup, It is giving the below message.
When i click on OK button, Instead of closing the appl'n is it giving the above error.
Thanks
KH

Hi KH,
IF_FPM_WORK_PROTECTION is not working in portal .
As per my knowledge, the method Is_Dirty( ) method just sets the EV_DIRTY flag and informs the portal about unsaved data on application.
Please refer the below help link
Work-Protect Mode - Floorplan Manager for Web Dynpro ABAP - SAP Library
I don't think we need to do any thing else at WD side.
Please consult portal team member to assist you in this case.
Settings for WorkProtect Mode (SAP Library - iViews)
Hope this helps you.
Regards,
Rama

F4 help Not Working in Portal but working in RSRT and BEx

Hi All,
We have a report in which a customized infoobject is used as one of the selection criteria. This field is a navigational attribute of main infoobject. There are other two navigational attributes of this infoobjects as well in the selection critera.
When we run the report using portal and click on F4 for this variable, it is not reading master data whereas it is working fine if we are using RSRT or BEx.
The other two variables are working fine in the portal as well.
Please help us incase if you have encountered such problem.
Thanks,
Dinesh

Hi Imran,
thanks for the reply.
I will explain the problem in detail
We have a query Q1 and its web template WT_Q1. We have the infoobjects a, b, c and d. the infoobjects b,c and d are the navigational attributes of the infoobject a. We have a cube C01 where all of these infoobjects are used.
All the Infobjects are the selection variables in the Query Q1 which are actually the navigational attributes.
When we F4 on c or d, it is picking up the master data and displaying it iin portal as well as BEx or RSRT.
But the F4 on "B", it is not displaying in portal whereas in BEX or RSRT we are able to get the master data values.
On further analysis, i have found that it is not hitting the specific SQL code from where the master data objects are read.
Hope this is clear.
Thanks,
Dinesh

System name for alias GD4_500 not found in portal

Hi people,
I want to launch a query from analyzer, but i have the next error message "System name for alias GD4_500 not found in portal".
What can i do??
More thanks

Read,
http://help.sap.com/saphelp_nw70/helpdata/en/fb/93ed3d72fe4b5ae10000000a11405a/content.htm
Regards
Juan

Working with documents via BEx Analyzer not using the portal

Hello,
i read that we are able to create (work) with documents (comments) via
BEx Analyzer. When i want to add a comment how it is described in the
help we get connected to the portal. We dont want to use the portal for
that. Therefore we searched a way to skip the portal. We read that in
BW Versions before 7.0 the portal was not connected but since 7.0 we
have the portal connectivity, but it should also possible to not use
the portal and to access directly the BI Server. I searched for the
Customizing to do so but i could not find it where to switch to the old
logic.
And another question is when we use the Portal with the knowledge base . The documents are stored in the document framework (SKWF). Is it the same as the Datawarehousing Workbench --> documents. This storage we want to use.
Can anyone give me a hint?
Kind regards,
Murat

Hi Murat,
We are also facing the same issue of when trying to create/access the documents from BEx analyzer it is connecting portal , we need to bypass portal and directly access the document browser in BW server.
In your thread you mentioned it is done. So can you please let me know how did you enable the old configuration?. It will be very much helpful to us.
Awaiting for your reply.
Thanks,
V.Senthilkumar

ESS Payslip is not swoinf in portal

Similar Messages

Maybe you are looking for