ESS Payslip - Unable to view in Portal after changing the variant in R/3.

Hi
Unfortunatly, someone was deleted a variant in R/3 for Payslip. So I have created a new variant in R/3 and am able to see my Payslip perfectly in R/3. But If I try to view the same Payslip ( for any month ) in Portal it is showing nothing.
I feel that this was happend due to that variant in backed missing. I know there is a property been set to that variant in repective iView.
Now I want set my created variant in Portal. Where exactly I have to add this variant in Portal ( iView) and how?
Regards

Have u set the required customisations in backend.
Normally when u see the payslip in ESS, it shows not for the current month its shows one month prior's salary slip so try generating a salary slip for previous month.
Regards,
--VP.

Similar Messages

How can i refresh view on query after changing the query?

Hi,
i built few view's on 1 query in BI7. after i made a change in the query i haven't seen it in the view, why?
it's not refreshing automaticly from the query? and if it's not, how can i refresh the view?
thanks
Meirav
Edited by: Meirava on Apr 2, 2009 11:43 AM

Hi,
You need to refresh that view and once again save the view with changed settings. Then it will brings according to the query changes.Once check the variables also.
Regards
Pcrao.

ESS Payslip is not swoinf in portal

Hi
I have a problem with ESS - Payslip. Problem has started with after deleting a variant in R/3 by some one. Now if I input the correct data and run the same, payslip is coming fine in R/3. But it is not showing correctly in Portal. Is there any variant configuration can be done at Portal? Also there were no changes for the past 5 months in Portal side. However we have restored the variant with different name.
Can some one provide sol...?
Points will be awarded...
Regards
Swarna

Hi,
Try creating new iview.
May be some thing wrong with the application but nothing to do with portal.
Thanks,
gopal

TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

See https://discussions.apple.com/message/19218571#19218571.

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

TS2529 what do i do when am unable to activate my iphone after using the itunes to update?

what do i do when am unable to activate my iphone after using the itunes to update?

I had something similar (wouldn't connect to my router). I just reset the router, and it went like a dream from there. Myabe your problem too? Good luck.

Unable to discover machines through SCOM after changing the IP range

Hello,
Last week in my company IP range was changed to class A network from class C network,before changing the IP range everything was working fine.but after changing the IP i am unable to discover any client machine through agent discovery and unable to install
agent over SCOM console
any help will be thankfull
regards,
angs

pinging is happening from both the servers from MS and client pc.
but from ms am not getting the server name if using -a command in front of ip.
nslookup is resolving.
recently in my firm the primary dns server is changed,i checked in dns host entry.management server is
registered perfectly
regards,
Nikhil

Language of Webdynpro after changing the Portal Language

Hi All,
Even after changing the portal language from for ex. English to French, the webdynpro is still displayed in English language.
If this session (portal window) is closed and new portal session is started, then the webdynpro is displayed in French.
Also please note that, for iviews built using Portal HTMLB (like JspDynPages), restarting the session is not necessary.
Any answer/solution/pointers/SAP Notes supplied is greatly appreciated.
Regards,
Rajit

Hi,
Refer to SAP Note 947081 about Internationalization
The Blog at /people/bertram.ganz/blog/2007/01/08/the-top-12-hottest-sap-notes-every-web-dynpro-java-developer-must-know talks about this Note.
3rd point mentions about "Language change in the portal (through portal personalization) does not get immediately reflected in the Web Dynpro iViews?"
Hope this solves your query.
Kind Regards,
Nitin

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

After changing the context path, felix console, I can not checkout content via vlt.

Hi everyone,
I have the following issue. After changing the context path, via felix console, I can not checkout the content via vlt. Before that, I could checkout without any problems.
I am using CQ5.5, CRX2.3, context path: /Test
That is what I am trying:
vlt -v --credentials admin:admin co http://localhost:23310/Test/server/crx.default
Connecting via JCR remoting to http://localhost:23310/Test/server
[WARN ] Authentication required to access repository descriptors
[ERROR] checkout: com.day.jcr.vault.vlt.VltException: Unable to mount filesystem
caused by: javax.jcr.ItemNotFoundException: Not Found
caused by: org.apache.jackrabbit.webdav.DavException: Not Found
Other versions I tried:
vlt -v --credentials admin:admin co http://localhost:23310/crx
vlt --credentials admin:admin co http://localhost:23310/Test/server
vlt --credentials admin:admin co http://localhost:23310/Test
vlt --credentials admin:admin co http://localhost:23310/Test/crx
To verify if I could connect to the instance properly I started CRXDE
and try to connect to "http://localhost:23310/Test"
After click the ok button I got that error:
No file system is defined for scheme: jcr
Part of the .log file (.crxde):
eclipse.buildId=unknown
java.version=1.6.0_37
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=de_DE
Framework arguments: -keyring /Users/peterwimsey/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86_64 -keyring /Users/peterwimsey/.eclipse_keyr
ing -showlocation
!ENTRY org.eclipse.core.resources 2 10035 2012-11-25 19:01:19.268
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to
recover changes.
!ENTRY org.eclipse.osgi 4 0 2012-11-25 19:04:14.363
!MESSAGE Application error
!STACK 1
java.lang.reflect.InvocationTargetException
        at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121)
        at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau
ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav
a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
        at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55)
        at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50)
        at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65)
        at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107)
        at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350)
        at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100)
        at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6)
Any tips or hints are welcome.
In the case you need more information, just leave a note.
Thanks in advance for your help.
Best regards,
Peter

The VLT works fine with the above URL change but How to fix "CRXDE" Initialization error if a context path is defined?
I have a context path defined /Test and when I am trying to login to CRXDE with URL as http://localhost:4502/Test, I am getting below Initialization Error.
Any workaround as Which URL should work while logging to repository (with context path) using CRXDE 1.0.1
eclipse.buildId=unknown java.version=1.6.0_06 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86 !ENTRY org.eclipse.osgi 4 0 2013-04-25 17:50:23.802 !MESSAGE Application error !STACK 1 java.lang.reflect.InvocationTargetException at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121) at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55) at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107) at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350) at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100) at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6) at com.day.cq.ide.init.SetupWorkspaceOperation.execute(SetupWorkspaceOperation.java:119) at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:106) at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800) at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:118) ... 13 more Root exception:
Thanks.

PDF in Word after changing the old PC

How can I use the Adobe ExportPDF after changing the crashed and old PC

Hi Zis,
I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
Please let us know if you need additional assistance.
Best,
Sara

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

ORA-12545 error after changing the host name as IP address in Tnsnames.ora

HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address.

Poor Printing quality after changing the catridges

After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
regards,

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

ESS Payslip - Unable to view in Portal after changing the variant in R/3.

Similar Messages

Maybe you are looking for