ESS Permanent Address Application

Hi experts,
I need a sample ESS Permanent Address Application.Can anyone send a ESS permanent address application to my mail address.
[email protected] ....
Thanks & Regards
Karthik

Hi,
EDIT: Found this thread in the meantime, might be helpful: /thread/1270887 [original link is broken]
Anyway, if role-based personalization fails and there are even dependencies on the lowest-level UI-elements for some reason plus you have no option to influence the service via SPRO; as far as I know you'd have to go for modification in NWDI/NWDS.
But better wait with that until Siddarth or so commented this to be on the safe side.
regards, Lukas
Edited by: Lukas Weigelt on Apr 15, 2011 1:12 PM
Edited by: Lukas Weigelt on Apr 15, 2011 1:15 PM

Similar Messages

ESS US Addresses - Hide Review Button

Hello Experts,
I'm currently working on an ESS DC for BP 1.0 (ERP 2005), specifically the US Addresses webdynpro application (essusaaddr) and my requirement is to show the Edit Screen differently, according to the different Infotype 0006 subtypes available in the Bizcard overview screen.
I got this done by verifying which is the active subtype and depending on this, I change fields atributes accordingly (e.g. Read Only, Invisible).
Problem is that for one specific subtype I need to hide the Review and Save button, because this subtype is all read-only. And I cannot find the application's buttons anywhere, so I don't know how to act upon them...
Bottom line is: where can I find the buttons for the Bizcard view and Edit view for the ESS US Addresses application? Anyone?
Thanks a lot in advance,
Antonio Caldas

Hi Guys,
Thanks for your replies.
I'm sorry but I think I wasn't clear enough. The question is not hiding a button or label using the FPM personalization features. The question is that for the US Addr application, only one Edit view is provided, ao all subtypes existing in the Overview Screen point to it. The result is that if I hide the "Review" button in the Edit view, this will apply for all subtypes. And my requirement was only to hide the Review button for 2 specific subtypes.
So the only way I managed to solve this by modifying the standard us~addr webdynpro application, using code logic.
Thanks again for your replies,
Antonio

Regarding ESS Addresses application

Hi,
We are using EP 7.0 and implemented ESS/MSS.
Now they have activated Com01, Num01 fields of Infotype 6(Adresses).
But these fields are not visible in the Addresses application of ESS.
For example if I add these entries in Permanent address type, these fields are not displayed in Portal,
Is there any configuration available in the ECC to make these fields visible in portal ESS application also since these fields are standard or do we need to go for customization.
Any idea on this will be highly appreciated.
Thanks and Regards,
Vivek.

Hi,
In order to add the required fields in the ESS Addresses application, we need to add those fields in the following structure of the country specific function module HRXSS_PER_EDIT_P0006_XX where XX u2013 defines the country code(say de- germany, fr-france)
Structure: HCMT_BSP_PA_XX_R0006 where again XX u2013 defines the country code
After changing the structure you need to restart the portal for this to reflect and use the below mentioned link.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
After that you need to enhance the BADI HRPAD00INFTYUI for the input conversion ans output conversion.
Please let me know for further clarification.
Regards,
Vivek,

ESS form change permanent address - how to modify text?

We would like to change the default / delivered text in the SAP delivered ESS form "Change Permanent Address".
Currently it seems to translate very poorly from German to English.
How do we alter the "change permanent address" text...specifically the part that that reads" ... in so10?
"FORM AREA FOR EMPLOYEE" ...
Thanks,
Matt

solved.
found change of address form id here:
http://help.sap.com/erp2005_ehp_05/helpdata/en/45/619a91e2d01feee10000000a1553f7/frameset.htm
entered into SFP transaction (installed adobe life cycle manager).
opened ISR_HRASR_SHAD, MADE changes.

Error in address application

Hi,
I am working on the ESS 600 and EP7 and ECC6.0.
My address application is working fine means giving all the address correctly.But when i am trying to Edit the following error is there:
The initial exception that caused the request to fail, was:
   java.lang.NoSuchMethodError: com.sap.xss.per.fc.persinfo.wdp.IExternalFcPersInfoInterface.setSelectedRecord(I)V
    at com.sap.xss.hr.per.ca.address.overview.VcPerAddressCAOverview.edit(VcPerAddressCAOverview.java:237)
    at com.sap.xss.hr.per.ca.address.overview.wdp.InternalVcPerAddressCAOverview.edit(InternalVcPerAddressCAOverview.java:257)
    at com.sap.xss.hr.per.ca.address.overview.BizCardsView.onActionEdit(BizCardsView.java:184)
    at com.sap.xss.hr.per.ca.address.overview.wdp.InternalBizCardsView.wdInvokeEventHandler(InternalBizCardsView.java:222)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)

Hi Anumit,
                Check with the Patches this could resolve u r issue.
Regards,
Kumar.

How to Pass personal number(pernr) to the ESS Webdynpro ABAP Application

Hi,
How to pass personal number of employee to the standard ESS webdynpro ABAP application as application parameter of iview.
Thanks
Srikanth

Hi
For WebDynpro application in iView there is a property to set Parameter for WebDynpro application.
Handel these passed parameters in Default plug of Interface Controller.
Note string passed as parameter in iview is case sensitive.
Try this code to get URl of Deployed application
String appURL = null;
try {
     WDDeployableObjectPart currentAppPart =wdThis
                              .wdGetAPI()
                              .getComponent()
                              .getApplication()
                              .getDeployableObjectPart();
appURL = WDURLGenerator.getApplicationURL(currentAppPart);
} catch (final WDURLException ex) {
wdComponentAPI.getMessageManager().reportException(
                         new WDNonFatalException(ex),
                         false);
Mandeep Virk

Customizing standard ESS Leave Request Application

Hi,
We are using standard ESS Leave Request application in our project. I need to set a default value to " Type of Leave" to some value say "Vacation".
Anyone kindly let me know is it possible to set some default values in SAP standard applications and how can we do that.
Regards
Pavan

Is this a repeat?
Re: Customizing standard ESS Leave Request Application
Yash

ESS - Change Address (IT-0006) - Workflow

Hi,
W need to implement workflow for approval by the modification of addresses in ESS by Portal, we want to know if there's any standard way to do it.
Thanks in advace

Hi,
Ok I have understand your Req...
The process whts u want its not the standrd process also its not avaible in the ESS MSS .....................
Where as iin .............I will suggest you ..........As per your Senario its needed the cutomisation for the same....
Create the custome application for the same and there you need to give the code that .........if ADD change then
The changed address should go to manager for the apporal for this you need to develope Custome Workflow ....
So at the last it will be Cutomisation application and workflow you need to create for the same

ESS Portal -- Address for AUE

Hi
We have client in AUE. When employees log on ESS, they can not see address update service. They got error that ' there no services in this area". I checked ESS configuration table V_T7XSSPERSUBTYP. We have configuation of address (0006) for AE. Please advise where should I check further. Thanks.
Regards,
Jim

Hi,
To debug, open the BADI, and put External break point in your code.
Then click on menu Utilities -> Settings
In displayed box, click on ABAP Editor tab -> then displayed tabs click on Debugging tab
Here in External Debugging users field specify your user ID. Then check the Session breakpoint activ.imme
Click on continue.
Now you logon to portal process the application.
Regards,
Shankar.

Java.lang.NullPointerException with ess~lea LeaveRequest application on 5.0

When we try to start the LeaveRequest-application of ess~lea the system still generates a 500 Internet Server Error. We tried to do all the required customizing.
We have read all other related SDN-messages on this problem but there seems to be no working solution. Anyone who knows a solution?
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
    at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
    at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
    at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
    at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
    ... 32 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4017.00.0000.20060503180106.0000 (release=630_VAL_REL, buildtime=2006-05-15:20:31:30[UTC], changelist=401354, host=PWDFM026)
J2EE Engine 6.40 patchlevel 104329.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale en_US
Time of Failure Mon Nov 20 16:28:59 CET 2006 (Java Time: 1164036539281)
Web Dynpro Code Generation Infos
sap.com/ess~lea
SapDictionaryGenerationCore 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:18:52[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:19:05[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:25[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:40:00[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:39:50[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary 6.4016.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-03-27:20:43:36[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro 6.4016.00.0000.20060302125910.0000 (release=630_REL, buildtime=2006-03-27:20:51:45[UTC], changelist=392272, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
SapWebDynproGenerationCore 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:54[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
sap.com/pcui_gp~xssutils
SapDictionaryGenerationCore 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:18:52[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:19:05[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:25[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:40:00[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:39:50[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary 6.4016.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-03-27:20:43:36[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro 6.4016.00.0000.20060302125910.0000 (release=630_REL, buildtime=2006-03-27:20:51:45[UTC], changelist=392272, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
SapWebDynproGenerationCore 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:54[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
sap.com/tcwddispwda
No information available
sap.com/pcui_gp~xssfpm
SapDictionaryGenerationCore 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:18:52[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:19:05[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:25[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:40:00[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:39:50[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary 6.4016.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-03-27:20:43:36[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro 6.4016.00.0000.20060302125910.0000 (release=630_REL, buildtime=2006-03-27:20:51:45[UTC], changelist=392272, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
SapWebDynproGenerationCore 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:54[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
sap.com/tcwdcorecomp
No information available
sap.com/pcui_gp~tecl
SapDictionaryGenerationCore 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:18:52[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4016.00.0000.20060302115352.0000 (release=630_COR, buildtime=2006-04-05:01:19:05[UTC], changelist=392239, host=PWDFM027.wdf.sap.corp)
SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:25[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:40:00[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore 6.4016.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-03-27:20:39:50[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary 6.4016.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-03-27:20:43:36[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro 6.4016.00.0000.20060302125910.0000 (release=630_REL, buildtime=2006-03-27:20:51:45[UTC], changelist=392272, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
SapWebDynproGenerationCore 6.4016.00.0000.20060302114850.0000 (release=630_COR, buildtime=2006-04-05:01:28:54[UTC], changelist=392229, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4016.00.0000.20060306111738.0000 (release=630_COR, buildtime=2006-04-05:01:43:52[UTC], changelist=392602, host=PWDFM027)
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
     at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
     at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface$External.onInit(InternalVcFormEditInterface.java:234)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:347)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:382)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi all,
If my memory serves me well, the exception is thrown because the application needs a working calendar for a person provided in time mangement. Make sure the correct infotypes are used. Also the organization structure needs to be set up correctly. The manager needs someone to approve and the employee needs someone to get approved by.
Regards, Marcel.

ESS US ADDRESS IVIEW NOT SHOWING ALL OVERVIEW FIELDS

NW2004s , EP 7 , MYSAPERP 5.0, ECC 6.0
ESS ADDRESS IVIEW - ( UNDER PERSONNEL INFORMATION ) -
The IView is not showing up few key fields in the Overview Part
for instance - Name, C/O , State , Zip code fields are missing from the overview part, but when i go to Edit part these field show up ( having data in them ).
The personalization option shows NO UI Element listed ( in the Overview - Transparent container ) in both Displayed and Hidden Column ( Yet few fields are showing up - Street Address , Telephone without area code )
I deleted all the personalizations from the iview and the corressponding page ( By reseting it - as advised by a fellow SDN'er ) , but it didn't fixed the issue.
Backend is correctly configured and webdynpro code has the fields listed as well.
There isn't any SAP Note on this, as well.

what SP level ar eyou on. If you are not on EHP2 or EHP3 ( that is ESS 1.3), the fields on the overview overview are hard coded ( UI elements generated on runtime not during design time) and hence you will not be able to use personalization. You will have to add fields in wdDoModify method of the overview screen.
I remember replying with a code of how to do this. Probably you may find it with a search on ESS forum

Modifications in the standard ESS WD abap application

Hi
I have a requirement in the travel request of ESS application which is webdynpro abap.
When i select create travel request and in the first screen give the travel details and after clicking on review button at the bottom it is navigated to other screen in which we find Final action section where there are two radio buttons 1) Save 2)Save and send for Approval .
Now my requirement is we have two remove those two radio buttons completely and place the static save and save and send for approval buttons at the bottom.
For these static buttons i have to perform action where i found in the standard application it is not directly calling standard methods at the controller level but it is performing action based on the dynamic text of the " forward" button on action navigate-> start navigation ..........so how can we perform the similar action with the static buttons in created in FITE_REVIEW component .
Thanks in advance.

Have you checked the feeder class and see if you can perform the changes there.

Error in ESS bank information application

Hi all,
In ESS personal inforamtion workset in bank details application when i am trying to edit the application it is giving the following error.
Data record 0000000400090 9999123120071015000 has grouping value "" instead of "99"
when I click the review button it is giving this error.
There is no functional consultant avaialable rigt now.Can anybody Pls help me .
Thanx and regards,
Rajesh
Edited by: Rajesh A on May 15, 2008 10:27 AM

Hi Anil,
Thanx for ur response.I tried to run the report.there are dat inconsistebncies.When I execute it is giving the following error.It is not able to remove the inconsistencies.It is giving a system message.
Change before earliest retro. date 01.04.2008 acc. to control rec. to py area AE
Message no. RP456
Diagnosis
The master data change that you carried out is relevant to payroll.
It comes before the earliest retro date according to control record that changes relevant to payroll for this employee can be made.
System Response
You can not carry out the change.
Procedure
Check your entries and the status of the control record of payroll area AE (transaction PA03)
Can i change the earliest retro. date in PA03 .......Is there any problem in doing so.?If not how to change it.
Thanx and Regards,
Rajesh
Edited by: Rajesh A on May 15, 2008 12:55 PM

Getting all data for ESS Pers, Address, Bank & Family screen from SAP 4.7

Hi,
I need suggestions on a weird situation that we have in one of the ESS/MSS project.
Following are the systems that client has: -
      1. Enterprise Portal 7.0
      2. SAP ECC 6.0 -
> (all JCOs in ESS/MSS DCs point to this system.. so in short this system is mapped to Portal)
      3. SAP 4.7            -
> (they are maintaining all data for Pers, Address, Bank & Family here)
      4. Infotype data for some infotypes (such as 0105) are synched between these two SAP systems.
Now, there are some standard + Z fields added in infotypes in SAP4.7 system.
To display Z- fields on Portal, here is what is already done: -
       - Z - RFC is written in SAP ECC6.0 that calls SAP 4.7 to get the data.
       - Standard ESS WD DCs (pers, addr, fam & bank) are edited to call above RFC to display Z - fields.
Now, Client wants : -
      - to display all data from SAP4.7 system on portal (standard as well as Z fields).
      - use ECC6.0 system as a middle box between EP & SAP4.7.. There will be RFCs written in SAP ECC6.0 system that will call FMs in SAP 4.7 and return the data
Now, I don't understand how do I change standard WD DCs that has some standard ARFC models (HRXSS_PER*) written in them.
Any ideas on how to proceed on these objectives?
Please help.
Thanks & Regards,
Amey

Hi Siddarth,
Thanks for reply.
So I have following alternatives ? : -
Option-1 : Sync data between ECC6.0 and SAP4.7 for these Infotypes at regular intervals.
                    (No changes @ ABAP & WD code)
Option-2 : Enhance standard RFCs (such as HRXSS_PER_READ_P0006_FR) in ECC6.0 system to get data from SAP4.7.
                    (Changes @ ABAP side only)
Option-3 : Create custom RFCs in ECC6.0 and import them at WD side and set data in 'SelectedInfotype' node?
                    Then what do we do about standard RFC calls that are already present in these DCs?
                    I am a bit skeptical about this approach.
                    (lot of work in both ABAP & WD side)
Can you please comment?

Overview Link of ESS Salary Stat application

Hello,
We are using few ESS applications in our environment. We were using the ESS applications without any customization so far. Now, we have some requirements for customizing a few things. I would really appreciate your help in the following requirement.
(We have the NWDI setup and track created I have imported the configuration into NWDS and created the appropriate project for ess/rem and ess/rep).
(We are on EP 7.0 using Webdynpro Java XSS 600 components)
Our requirement is:
In the ESS pay (Remuneration) statement application:
1. Display the Overview screen by default (This is hidden now and will only be displayed if you click on the link "Show Overview")
I really have very limited idea about this webdynpro application and am having difficulty finding the exact piece of code to be modified.
I will appreciate your help.
Thank You,
Kalyan B

Dear Kalyan,
 I have not done anything, try to check the table properties and redeploy it again.
 Please find my coding
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.sap.xss.hr.rem2.selection;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateSelectionView).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import com.sap.tc.webdynpro.clientserver.uielib.standard.api.IWDTable;
import com.sap.tc.webdynpro.progmodel.api.WDVisibility;
import com.sap.xss.hr.rem2.selection.wdp.IPrivateSelectionView;
//@@end
//@@begin documentation
//@@end
public class SelectionView
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(SelectionView.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.sap.xss.hr.rem2.selection.wdp.IPrivateSelectionView for more details
private final IPrivateSelectionView wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.sap.xss.hr.rem2.selection.wdp.IPrivateSelectionView.IContextNode for more details.
private final IPrivateSelectionView.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDViewController wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public SelectionView(IPrivateSelectionView wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 // Added here to Call methods When the Application is loaded.
 if(wdContext.currentVCDATAElement().getLINK_ENABLED()){
 try{
 wdContext.currentContextElement().setTable_visible(WDVisibility.VISIBLE);
 wdContext.currentVCDATAElement().setOVERVIEW_SEL("99");
 wdThis.wdGetVcRem2SelectionController().execAction(wdContext.currentVCDATAElement().getACTIONID_LINK());
 wdThis.wdGetVcRem2SelectionController().execAction(wdContext.currentVCDATAElement().getACTIONID_DDSEL());
 }catch(NullPointerException e){
 wdComponentAPI.getMessageManager().reportWarning("Salary Statement does not Exists in database for You : " + e.getMessage());
 }else{
 wdContext.currentContextElement().setTable_visible(WDVisibility.NONE);
 wdComponentAPI.getMessageManager().reportWarning("Payroll data does not Exists, Check with HR Team");
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static in order to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers etc.
The Web Dynpro programming model recommends to restrict access to
UI elements to code executed within the call to this hook method!
@param wdThis generated private interface of the view's controller as
 provided by Web Dynpro; provides access to the view controller's
 outgoing controller usages etc.
@param wdContext generated interface of the view's context as provided
 by Web Dynpro; provides access to the view's data
@param view the view's generic API as provided by Web Dynpro;
 provides access to UI elements
@param firstTime indicates whether the hook is called for the first time
 during the lifetime of the view
//@@end
public static void wdDoModifyView(IPrivateSelectionView wdThis, IPrivateSelectionView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
 //@@begin wdDoModifyView
 //wdContext.nodeVCTABLE().getNodeInfo().addAttributesFromDataNode();
 //wdComponentAPI.getMessageManager().reportWarning("Check Status : " + wdContext.currentVCDATAElement().getOVERVIEW_VISIBLE());
 IWDTable viewTab = (IWDTable) view.getElement("OverViewTab");
 wdThis.wdGetVcRem2SelectionController().assignTable(view, viewTab, wdContext.nodeTABLE0(), firstTime);
 if (wdContext.currentVCDATAElement().getOVERVIEW_VISIBLE() == WDVisibility.VISIBLE) {
 // overview is already shown - enable close
 wdContext.nodeCONTENT_TABLE0().setLeadSelection(wdContext.currentVCDATAElement().getSELECTED_TABROW());
 wdContext.currentRemLocalElement().setLinkOverviewLabel(wdThis.wdGetAPI().getComponent().getTextAccessor().getText("CloseOverviewLabel"));
 wdContext.currentRemLocalElement().setLinkOverviewTooltip(wdThis.wdGetAPI().getComponent().getTextAccessor().getText("CloseOverviewLabel"));
 } else {
 wdContext.nodeCONTENT_TABLE0().setLeadSelection(-1);
 wdContext.currentRemLocalElement().setLinkOverviewLabel(wdThis.wdGetAPI().getComponent().getTextAccessor().getText("OpenOverviewLabel"));
 wdContext.currentRemLocalElement().setLinkOverviewTooltip(wdThis.wdGetAPI().getComponent().getTextAccessor().getText("OpenOverviewLabel"));
 //@@end
//@@begin javadoc:onActionOverViewRowSelection(ServerEvent)
/** declared validating event handler */
//@@end
public void onActionOverViewRowSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionOverViewRowSelection(ServerEvent)
 wdContext.currentVCDATAElement().setSELECTED_TABROW(wdContext.nodeCONTENT_TABLE0().getLeadSelection());
 wdThis.wdGetVcRem2SelectionController().execAction(wdContext.currentVCDATAElement().getACTIONID_TABSEL());
 //@@end
//@@begin javadoc:onActionToggleVisibility(ServerEvent)
/** declared validating event handler */
//@@end
public void onActionToggleVisibility(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionToggleVisibility(ServerEvent)
 wdThis.wdGetVcRem2SelectionController().execAction(wdContext.currentVCDATAElement().getACTIONID_LINK());
 //@@end
//@@begin javadoc:onActionSel_ListSelection(ServerEvent)
/** declared validating event handler */
//@@end
public void onActionSel_ListSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionSel_ListSelection(ServerEvent)
 wdThis.wdGetVcRem2SelectionController().execAction(wdContext.currentVCDATAElement().getACTIONID_DDSEL());
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
//@@end
Regards
Ponnusamy

ESS Permanent Address Application

Similar Messages

Maybe you are looking for