ESS photo and Collaboration Photo

How can I integrate ESS employee photo whit the Collaboration user photo ....to explain more... from the photo of iView "User Photo Maintenance (Self Service) " and the Change own data iView.
Portal user use UME datasource and not R3 data source. ESS its working fine... and ESS phot are getting from HR.
Any ideas... Any help.. ANy tricks?
Thanks in advance..
Edited by: José Francisco Maldonado Vargas on Jul 14, 2009 4:29 PM

Hi José,
I have the same question. Did you find an anwser?
gr
Joeri

Similar Messages

NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine

Hello,
with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maintenance costs (administration overhead for evry portal). For a small Customer i will build one Portal for all. It is possible e.g. to use the BI Portal with ESS/MSS and as full portal?
Best regards,
Patrick

Hi,
So you would like one BI installation with both the ABAP and the Java-stack with the full BI-functionallity and additionally the XSS-component and set it up to work against the ECC ABAP-only system ?
I think the scenario would actually work, but:
1) You might get future problems if you want to upgrade your BI-system and not the ECC-system.
Is it possible to run the old XSS-components in the new java-stack ?
2) You might get future problems if you want to upgrade your ECC-system and not the BI-system.
What if the new version of the XSS-component demands certain java-components which the BI-system do not have.
So my recommendation is still to run the java-stack on both systems.
ECC with the XSS-java-components and BI with the Bi-java-components.
This way you do not lock yourself into a corner and each system can be upgrade independent of the other.

Email Notifications for both UWL Tasks and Collaboration Tasks.

Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.

Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan

Email Notifications for UWL Tasks and Collaboration Tasks

Hi,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
I done with the all the Configurations suggested in the below link:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
Thanks in Advance.
Regards,
Sridhar.

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

ESS Benefits and Payments

Hi,
I am getting the following errors when i click the "FlexBens: Open Enrollment" as well as "FlexBens: Print Form" on ESS benefits and payments
No correct adjustment reason specified:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No correct adjustment reason specified
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.xss.hr.fbn.enrollmentreasons.VcFlexBensEnrollmentReasons.isConsistent(VcFlexBensEnrollmentReasons.java:206)
     at com.sap.xss.hr.fbn.enrollmentreasons.wdp.InternalVcFlexBensEnrollmentReasons.isConsistent(InternalVcFlexBensEnrollmentReasons.java:174)
     at com.sap.xss.hr.fbn.enrollmentreasons.VcFlexBensEnrollmentReasonsInterface.isConsistent(VcFlexBensEnrollmentReasonsInterface.java:183)
     at com.sap.xss.hr.fbn.enrollmentreasons.wdp.InternalVcFlexBensEnrollmentReasonsInterface.isConsistent(InternalVcFlexBensEnrollmentReasonsInterface.java:152)
     at com.sap.xss.hr.fbn.enrollmentreasons.wdp.InternalVcFlexBensEnrollmentReasonsInterface$External.isConsistent(InternalVcFlexBensEnrollmentReasonsInterface.java:228)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:507)
We are on ESS 6.0, EP 7.0.
Thanks for your help...

Hi Sharadha,
Thanks for your quick response, i followd your steps now i am getting diff error.
Flexible benefits is not activated for benefit area 10:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Flexible benefits is not activated for benefit area 10
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.xss.hr.fbn.FcFlexBens.reportRFCError(FcFlexBens.java:1104)
     at com.sap.xss.hr.fbn.FcFlexBens.reportRFCError(FcFlexBens.java:1070)
     at com.sap.xss.hr.fbn.FcFlexBens.callRFCInitSelection(FcFlexBens.java:1364)
     at com.sap.xss.hr.fbn.FcFlexBens.readPlanSelection(FcFlexBens.java:525)
Thank you..

ESS benefits and payment not displaying after support pack update

Hi All,
After the latest HR support pack update ESS benefits and payment not displaying
SAP ECC 604 EPH5
SAP_ABA 702
SAP Kernel : 720_EXT_REL
Kernel Patch number : 439
Netweaver portal version - 7.30
please help
Regards
Rahul

Hi Siddharth & Jwala,
the issue got fixed, by changing the order of Payment above the Benefits
1. i made some options to be disabled & enabled in both benefits and payment
2. Then in the portal i could see the benefits and payment
3. inside the benefits & payment i was able to see two option 1 is for benefits & other is for payment
4. we only wanted payment functionality to be displaying
5. so i tried to hide the benefits then noting was getting displayed in the portal
6. finally i changed the order of the payment just above the benefits
then then i was able to see the benefits and payment inside that i was able to see the payment where i was able to see the payslip
i am not sure what i have done but i is working but please let me know what the problem was actually
Regards
Rahul

Trying to see the Guided Demo of KM and Collaboration in SDN

Hi,
Just one month back , I found a eclass in SDN, a demo( guided end user tour) of KM and Coolaboration to illustrate the functionality of the end users. This was a eclass with the online demo but only with a voice and no small video of the instructor. The full page was used to show the Portal Page in action and showed the capability of KM AND COLL as the end would experience.
Currently all the eclass( KM and coll) are power point based demo and the one that I am talking about is no longer available.
Have any body seen the one I mentioned before and help me to find it. If any body has it stored on his/her's pc let me know, i can send my email address .
Thanks
Arun

Hi Arun,
have you checked this link?:
https://www.sdn.sap.com/irj/sdn?rid=/media/public/videos/knowledge management and collaboration features/index.html
There are a couple of other eclasses with powerpoint presentations and a speaker here on SDN. Just check the links on the right side panel under "eLearning" on the "Knowledge Management & Collaboration" Developer Area:
https://www.sdn.sap.com/irj/sdn/developerareas/km
Hope this helps,
Robert

Re: Function Module to Validate ESS Id and Password

Hi ,
Is there is any function module / BAPI to validate the ESS Id and Password .
Regards,
Vijay

Hello Vijay,
there is a BAPI:
BAPI_EMPLOYEE_CHECKPASSWORD
Regards
Gregor

Ess career and job skills link problem

Hi
A blank page is coming when i click on skills of ess career and job.
what I read from documentation is it is given
prerequisite:
You have made the settings required for this service in the following activity in the Implementation Guide for Personnel Management: Employee Self-Service ® Service-Specific Settings ® Career and Job ® Skills.
I have gone thhere and help shows
Make Settings for Skills Profile Service
Use
In this Customizing activity, you can make the settings for the Employee Self-Service (ESS) Skills Profile. You can use the switches available to make the following settings:
Switches QUALI DEST1 and QUALI DEST2 allow you to set up the system ID required for the RFC connection for ESS. In QUALI DEST1, you must enter the first characters of the system ID (maximum of 10 characters). If the system ID exceeds 10 characters, you can enter the remaining characters in QUALI DEST2. In each of the two switches you can enter a maximum of 10 characters. That is, you can enter a system ID that is composed of a maximum of 20 characters.
Switch QUALI FORM enables you to set up the SAPscript form required to print the skills profile in ESS. A standard form is already set up in the standard delivery (see below).
Switch QUALI REQPR enables you to set up which skills proficiencies, required by the position, are to be displayed in the employee's skillsprofile.
Switch QUALI TRURL enables you to set up whether a suitable training proposal should be displayed in the ESS Skills Profile for missing or insufficient skills and licenses.
Standard settings
The following switch settings are delivered as standard:
QUALI DEST1: - (no value)
I dont understand what I have to maintain.

hi p gopala
Go to IMG -> Cross-Application Components -> Homepage framework -> Resources -> Derfine Resources -> (Add Entries)
Double Click on Resource object "EMPLOYEE_SKILLSPROFILE_SERVICE".
Under URL of PCD page, you will find
ROLES:// portal_content/com.sap............
Delete this line and replace it with following..
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.area_career_job/com.sap.pct.ess.serv_career_job
save your entry.
Customizing request is created.
Release this request from 'SE09'
Restart the J2EE server.
Regards,
Kaushal

ESS : Career and job - data overview problem

Hi Experts,
I am getting error in ESS -> Career and job -> data overview.
Although SSO is successfully configures it asks for login when i click on data overview link and it always fails for login.
Please give me solution
Thanks
Sameer

Hi Sameer,
Generally this type of problem occurs when the Portal Certifcate is expired, please check the validity of Certificate.
Please check it through strustsso02 transaction.
Thanks and Regards,
Deepak..

What are the ESS career and job bsps to activate?

hi all.
we have been asked to look at implementing the career and job iviews from ESS 100 (we have ecc 6.0 backend).
i read the step by step document i found here but from what i read about bsps, they have to be activated. but i did not find any info in the docs that tell me what the bsp services are that i need to activate.
can anyone tell me what they are, please? also what the procedure is to acticate? i really appreciate it.
thx,
mike

Hi Mike,
I don't have any idea about which BSP applications have to be activated for ESS career and jobs but I can tell you the procedure to activate.
Goto transaction SICF, follow the path default_host/sap/bc/bsp/sap. Right click the service and choose activate service.
Regards,
Sathish
Note: Reward useful answers

How to disable options in ESS-Career and job-Skilla profile

Hi All,
In ESS-Career and Job-Skill profile,there are three are three buttons 1.EDIT SKILL,2.ADD NEW SKILL,3.DELETE SKILL.
I want to disable those options in Skills profile. Can some body please help me in solving this.
Thanks in advance.
Regards,
Thirun.

These three buttons are not configurable. You could easily modify them using NWDI and NetWeaver Developer Studio.
This is pretty much your only option to customize this iview.
If you have ESS in a track in NWDI, the Skills Web Dynpro project is under --> ess~skl. Create a project from here and open up the "Ovewview" View from the VcSklOverview Component.
From there, you just need to set the buttons to "Not Visibile"
Regards,
Tom

Ess- career and job- skills link

Dear All,
I need to change the Short application description that comes under the hyperlink "Skills Profile". (ess->career and job->skills link ) where should I change the description. And if I need to change the hyperlink name "Skills Profile" to something else then how to do it?
Regards,
Samir

Hi Samir,
Goto SPRO>Cross Application components>Home page framework>Services>Define Services.
There select the skills profile in Add entries & change it to what you want.
Hope it answers your question.Do award points if found helpful.
Regards,
Gourav.

Can anybody send me some docs on ESS/MSS and Adobe Forms.

Hi all,
Can anybody please send me some doc/materials/link on how to coonfigure/develop/work with ESS/MSS and Adobe forms.
Its very urgent requirement.
Thanks n Regards
A.M.Rao

For ERP 2005 check out
hi ,
for ess..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
Personnel Admin.http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/0fab358b096510e10000009b38f839/frameset.htm
Training & Event management
http://help.sap.com/saphelp_erp2005vp/helpdata/en/44/2bc9367a23fb68e10000009b38f889/frameset.htm
Personnel Development
http://help.sap.com/saphelp_erp2005vp/helpdata/en/cf/5e9b38f8236e6de10000009b38f842/frameset.htm
ESS - http://help.sap.com/saphelp_erp2005vp/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
MSS - http://help.sap.com/saphelp_erp2005vp/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
For ERP 2004
ESS - http://help.sap.com/saphelp_erp2004/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
MSS - http://help.sap.com/saphelp_erp2004/helpdata/en/0a/8b3b40b1607a56e10000000a1550b0/frameset.htm
Also if you have S User ID on SAP Service Marketplace, check out https://service.sap.com/mss-staging for MSS.
regards,
venkat.

Migrate from WD Java to WD ABAP in ESS Trips and Expenses

Hi
I got request to migrate from from Java to ABAP fof ESS trips and expenses. Could someone please give me a link to the documentation or any existing blogs?
thanks

bump...

Migration from WD Java to WD ABAP in ESS Trips and Expenses

Hello Experts,
We are migrated ESS Trips and expenses from WD Java to WD ABAP.
Following steps I have performed
1.     Activated FIN_TRAVEL_1 and FIN_TRAVEL_2 business functions.
2.     checked FITV_TRIP_FORM service in SICF /sap/bc/webdynpro/sap its active .
3.     Currently we are SAP ESS 6.0 EHP 4 , and accordingly we have down loaded
uwl_com.sap.pct.erp.mss.tra.14.zip , (for SAP ECC 6.0, Enhancement Package 4) [Note 1076144 - ESS trips and   expenses: Migration from WD Java to WD ABAP]
file as suggested in Migration from WD Java to WD ABAP in ESS Trips and Expenses user guide
4.     after uploading uwl_com.sap.pct.erp.mss.tra.14.zip file in SAP NetWeaver Portal -> System Administration -> System Configuration -> Universal Worklist->& Workflow -> Universal Worklist Administration.-> Object Types and View Definitions -> com.sap.pct.erp.mss.tra.
5.     after uploading file, when manager click up on u201Ccheck trip of ABCu201D workitem in his uwl , he is getting following error.
404   Not Found
SAP J2EE Engine/7.01
The requested resource does not exist.
Details:   Go to main page of this application!
Any idea for fixing this issue.

hi
in the java system , the portal will launch the approval frm the same system , for the abap component , the task type in uwl you might have to define a dynamic property as "System" and give the name of your r/3 system in there.
Try it
Regards
sameer

ESS photo and Collaboration Photo

Similar Messages

Maybe you are looking for