ESS Portal is going to Processing mode (webdynpro)

Hi all,
Plz Look into this matter.
in ESS Portal While pressing the Save button it is going to processing mode.
it is not going to even if debugging mode though i have set the break-point in the program.
so can any bod tell me where is the exact problem ,
it was happening earlier successfully .
but now it is creating the problem.
regards,
Sachhi

Hi,
Firstable, you have to set an EXTERNAL break-point with the same user that you are logged in Portal.
You can do this in Menu: Utilities > Settings > Tab ABAP Editor > Tab Debugging.
Regards,

Similar Messages

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • How to edit a webdynpro JAVA application of ESS portal

    Hi,
    I have to work on a webdynpor JAVA app configurged in ESS portal,the app shows the salary slip of the employees,but don't have logo in it,so i am suppose to put logo there,but not able to understand how to start work on it.
    i have fair idea of Webdynpro ABAP,but not able to undertand what to do in this case,also have to show few more text fields on its smartform/adobe form too,not even sure,the form which is generating in salry slip is based on smartfoms/adobe forms.
    pls advice...
    regds
    vipin

    Dear Vipin,
    What I will suggest you is to first find out the component  name,
    then from the component  find out the Model (RFC) which is used, I believe that HR forms or SAP Script is used to display the
    PDF, and if this is the case then it should be changed by your ABAPer.
    You can find the component name from the Iview Property "Application Namespace" (I hope you can find the iview),
    Now go to  Content Administration>>Web Dynpro >>Deployed Content. Here you can find your Model, Now you can go to R3. Type T-CODE se37, here type the name of your model,now you can see whether its a SMART FORM, HR FORM, SAP SCRIPT or ADOBE FORM(SPF).  In case its none, then definately It would be a interactive form UI in your webdynpro Application.
    Now when you have got the name of the Component, you can make your changes.
    Hope it helps.
    Warm Regards
    Upendra Agrawal

  • Process chain repair going to Debugger mode

    Hi everyone,
    When I try to repair a failed DTP process in a process chain, it goes into debugger mode. After exiting from debug mode, I can see that DTP has been executed successfully.
    Why process chain goes into Debug mode?
    Secondly after successful execution of DTP process, other remaining succeeding processes are not executed.
    any idea how to solve these issues.
    thanks for help
    Ahmad

    hi guys,
    Thank you all for taking time to reply.
    @Muhammad: there are no breakpoint(s) in custom routines.
    @Baskaran: DTP processing mode is set to Serial extraction, immediate parallel processing.
    @Amit, Martin: at DTP process repair, the Debug stop at following code
    * ==== Debugging ====
    * Breakpoint after start routine
        if i_r_trfn_cmd is bound.
          READ TABLE i_r_trfn_cmd->n_th_bp
               TRANSPORTING NO FIELDS
               WITH TABLE KEY bpid    = 3
                              datapid = i_r_inbound->n_datapakid.
          IF sy-subrc = 0.
    * --- Data ---
    *     See datapackage below
    * --- Debugging ---
            BREAK-POINT.                                       "#EC NOBREAK
          ENDIF.
        endif.
    when I simply exit, I can see in the process chain that DTP has executed successfully, but remaining processes don't execute.
    In the generated program of transformation of DTP, there are two breakpoints; one given above and the other is :
    * ==== Debugging ====
    * Breakpoint before end routine
        if i_r_trfn_cmd is bound.
          READ TABLE i_r_trfn_cmd->n_th_bp
               TRANSPORTING NO FIELDS
               WITH TABLE KEY bpid    = 4
                              datapid = i_r_inbound->n_datapakid.
          IF sy-subrc = 0.
    * --- Data ---
    *     See datapackage above..
    * --- Debugging ---
            BREAK-POINT.                                       "#EC NOBREAK
          ENDIF.
        endif.
    I have checked generated programs of other transformations both SAP delivered (business-content) and client custom transformations and they all have these two pieces of code.
    on additional question:
    when we do repair the below box appears. Can anyone explains what exactly is this? and if this has any thing to do repair going into the debug mode. What I read on
    https://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
    "Specify how long (in seconds) you want the delay to be between one event being triggered and the next process starting."
    I am thinking of deleting this DTP and using a new one in process chain.
    regards
    Ahmad

  • Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

    When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • Create webdynpro navigation iview in the Homepage on the ESS portal

    I am trying to create a webdynpro navigation iview in the ESS portal.  I haven't created a workarea navigation iview in 2 or 3 years. However, I think there was a a template in there called 'Webdynpro Navigation iView'. 
    Some of the parameters that are on those navigation iviewws are Application Name, Appication Parameters(it contained
    info like -> sap.xss.menuarea=ZWTAREA&sap.xss.menuargrp=ZSAPDEFAULTESS&sap.xss.menuhdr=SAPDEFAULT). 
    I would be grateful if someone could tell me how to create this kind of an iview.
    Thanks,
    Mike

    Hi Mahesh,
    We are Adding Travel Management to 3 of our roles.  The out of the box ESS Travel Management application works fine. However, we need to add it 3 types of employees.  Based on the type of employee we want them exclude some of the services.  I created 3 area's in spro.  I am just trying to get one of them to work right now.  To get one of the areas to work, I've done the following things.
    1) I created iview Travel Management NT Nav .  I created it using the parfile thing and selected WebDynproIntegrator.  The iview looks a little different that the Working Time Nav(This is one that we created for Working Time about 3 years ago. It works.).
    2) I created a proxy Web page under the page folder
    3) I linked the page and the iview together.
    4) I created the resource ZTRAREAN in spro
    5) I created the area ZTRAREAN in spro and set it's link to resource ZTRAREAN.
    6) I assigned 3 SAP Travel Management subarea's to my area ZTRAREAN.
    My goal is to get some of the sub areas linked to my new area.  After that I will look at creating my own subheadings which will exclude some of the services that are in out of the box Time Management sub area's.
    Thanks,
    Mike

  • Hiding field in ESS portal

    According to our client requirement in ESS portal we need to hide the Date of birth field from Family members/Dependents component in overview screen.
    In our development ESS portal we hide the date of birth field and the changes we made are reflecting in Development ESS portal but when we moving the corresponding TR to Test system the Date of birth field is not hided its looks in disable mode as shown in the attachment.
    kindly provide me some solution to solve this.

    Hi,
    You can hide this in two ways.
    01. you have do the personalization clicking right mouse and hide the filed if you have admin rights, if not ask your portal admini.
    02. if this is an webdynpro application, then via application configuaration or component configuaration, you can hide the element. ask youe webdynpro consultant.
    Regards,
    Dinesh

  • ESS Portal Issue

    ESS Gurus,
    We have a typical ESS issue at one of our cliens in the live system:
    The landscape details are as mentioned below:
    SAP ECC 6.0 with EHP4
    SAP Enterprise Portal 7.0 with JEE:-SP15 & JEECOR:- SP13
    We recently upgraded the SAP ECC 6.0 with EHP4 and we have not upgraded the Portal.
    Post the upgrade to backend ECC system with EHP4, in the ESS Portal 7.0 we are facing a typical issue while accessing "Personnel Details" as mentioned below:
    "Critical Error"
    A critical error has occured. Processing the service has to be terminated. Unsaved data has been lost. Please contact your system administrator.
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:107)
         at com.sap.xss.per.fc.persinfo.FcPersInfo.initPernr(FcPersInfo.java:376)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.initPernr(InternalFcPersInfo.java:762)
         at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.initPernr(FcPersInfoInterface.java:166)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.initPernr(InternalFcPersInfoInterface.java:267)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.initPernr(InternalFcPersInfoInterface.java:427)
         at com.sap.xss.hr.per.in.personal.overview.VcPerPersonalINOverview.onInit(VcPerPersonalINOverview.java:295)
         at com.sap.xss.hr.per.in.personal.overview.wdp.InternalVcPerPersonalINOverview.onInit(InternalVcPerPersonalINOverview.java:290)
         at com.sap.xss.hr.per.in.personal.overview.VcPerPersonalINOverviewInterface.onInit(VcPerPersonalINOverviewInterface.java:163)
         at com.sap.xss.hr.per.in.personal.overview.wdp.InternalVcPerPersonalINOverviewInterface.onInit(InternalVcPerPersonalINOverviewInterface.java:144)
         at com.sap.xss.hr.per.in.personal.overview.wdp.InternalVcPerPersonalINOverviewInterface$External.onInit(InternalVcPerPersonalINOverviewInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1246)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:547)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:591)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:822)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: com.sap.xss.per.model.mac.Hrxss_Data_Sharing_Info
    Found in negative cache
    Loader Info -
    ClassLoader name: [sap.com/ess~per]
    Parent loader name: [Frame ClassLoader]
    References:
       common:service:http;service:servlet_jsp
       service:ejb
       common:service:iiop;service:naming;service:p4;service:ts
       service:jmsconnector
       library:jsse
       library:servlet
       common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
       library:ejb20
       library:j2eeca
       library:jms
       library:opensql
       common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
       interface:resourcecontext_api
       interface:webservices
       interface:cross
       interface:ejbserialization
       sap.com/pcui_gp~xssutils
       sap.com/tcwddispwda
       sap.com/pcui_gp~xssfpm
       sap.com/tcwdcorecomp
       service:webdynpro
       service:sld
       library:tcddicddicservices
       library:com.sap.aii.proxy.framework
       library:tcgraphicsigs
       library:com.sap.mw.jco
       library:com.sap.lcr.api.cimclient
       library:sapxmltoolkit
       library:com.sap.aii.util.rb
       library:com.sap.util.monitor.jarm
       library:tcddicddicruntime
       library:com.sap.aii.util.xml
       library:com.sap.aii.util.misc
       library:tc~cmi
    Resources:
       /usr/sap/SGP/JC12/j2ee/cluster/server0/apps/sap.com/essper/webdynpro/public/lib/sap.comess~per.jar
       /usr/sap/SGP/JC12/j2ee/cluster/server0/apps/sap.com/ess~per/src.zip
    Loading model: {parent,references,local}
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModelClass.createNewBaseTypeDescriptor(AiiModelClass.java:422)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModelClass.descriptor(AiiModelClass.java:222)
         at com.sap.xss.per.model.mac.Hrxss_Per_Init_Pernr_Output.<init>(Hrxss_Per_Init_Pernr_Output.java:51)
         at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Init_Pernr(HRXSS_PER_MAC.java:457)
         at com.sap.xss.per.model.mac.Hrxss_Per_Init_Pernr_Input.doExecute(Hrxss_Per_Init_Pernr_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 60 more
    Caused by: java.lang.ClassNotFoundException: com.sap.xss.per.model.mac.Hrxss_Data_Sharing_Info
    Found in negative cache
    Loader Info -
    ClassLoader name: [sap.com/ess~per]
    Parent loader name: [Frame ClassLoader]
    References:
       common:service:http;service:servlet_jsp
       service:ejb
       common:service:iiop;service:naming;service:p4;service:ts
       service:jmsconnector
       library:jsse
       library:servlet
       common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
       library:ejb20
       library:j2eeca
       library:jms
       library:opensql
       common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
       interface:resourcecontext_api
       interface:webservices
       interface:cross
       interface:ejbserialization
       sap.com/pcui_gp~xssutils
       sap.com/tcwddispwda
       sap.com/pcui_gp~xssfpm
       sap.com/tcwdcorecomp
       service:webdynpro
       service:sld
       library:tcddicddicservices
       library:com.sap.aii.proxy.framework
       library:tcgraphicsigs
       library:com.sap.mw.jco
       library:com.sap.lcr.api.cimclient
       library:sapxmltoolkit
       library:com.sap.aii.util.rb
       library:com.sap.util.monitor.jarm
       library:tcddicddicruntime
       library:com.sap.aii.util.xml
       library:com.sap.aii.util.misc
       library:tc~cmi
    Resources:
       /usr/sap/SGP/JC12/j2ee/cluster/server0/apps/sap.com/essper/webdynpro/public/lib/sap.comess~per.jar
       /usr/sap/SGP/JC12/j2ee/cluster/server0/apps/sap.com/ess~per/src.zip
    Loading model: {parent,references,local}
         at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModelClass.createNewBaseTypeDescriptor(AiiModelClass.java:409)
         ... 65 more
    Please provide a solution.
    Thanks

    You have to upgrade your portal and backend to EHP4.
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES

  • ESS Portal Exception

    Hi Folks
    We have implemented leave requests in ESS Portal. Copy of WF12300111 is used. The WF works fine. The request is routed to the correct approver's UWL. However when the approver clicks on the work item to open it, the portal pop up window shows an exception is occured. How to fix this error. Can anyone guide how to remove this exception in the Approver's page. 
    Regards
    Waz

    Hi
    @Barin: Thanx for the response but it didnt work.
    the complete error from error trace is:
    Error:
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Exception occured in layer CommonTopLayer
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Error 2
    Content pass of Application Integrator failed.
    Component Name:       com.sap.portal.appintegrator.sap.WebDynpro,
    Context Name (iView): pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapWebDynproLaunch,
    Top Layer:            WebDynpro/TopLayer,
    Producer ID (FPN):    null,
    System Alias:         SAP_WebDynpro_XSS,
    Thanks & Regards
    Waz

  • TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

    its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

    If you have followed the standard Apple troubleshooting processes (see user guide )
    probably a trip to the local Apple Store Genius bar is called for before warranty runs out
    Assuming the iPad has been released in your Country if not you may have to take it to a
    neighbouring Country where it is available
    This page will tell you ,via the drop down menu Countries that can support iPad
    http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

  • Early 2008 iMac (8,1) randomly goes into sleep mode

    Hey,
    My early 2008 iMac (8,1) on 10.8.2 goes into sleep mode by itself. I've played around in Energy Saver, tried resetting SMC, NVRAM, replaced HDD, reformatted HDD, installed smcFanControl, reinstalled Snow Leopard, Lion, Mountain Lion. None of that worked. Took it to the Genius bar, performed some diagnostics tests and they said everything worked properly. Does anybody have the same problem? I can still use the computer for general computer use (light web surfing and e-mailing), but it seems to go into sleep mode when I have a lot of applications open and especially when watching videos. I've tried researching this problem, but I've haven't found a definitive answer. Right now, the Genius that I've been talking to thinks it may be the RAM. I'm waiting on new shipments of test RAM to arrive at the Apple Store for him to properly diagnose.
    Thanks,
    Jason
    iMac (8,1)
    2.8 GHz Intel Core 2 Duo
    2x2 GB 800 MHz DDR2 SDRAM
    ATI Radeon HD 2600 Pro 256 MB
    1TB 7200 RPM SATA ST1000DM003-1CH162
    If you want to read the whole time line, I've included it here. I apologize for it being so long.
    At first I was running Lion (10.7.5) and the computer would enter sleep mode whenever I was doing anything with video. For example, watching YouTube videos and chatting on FaceTime. And funny enough, I distinctly remember watching a bunch of movies with VLC and the computer did not go to sleep (Although, this is not true anymore). I could wake the computer up and use it, however within a few minutes the computer would re-enter sleep mode. The computer seemed fine and I could access all of my files. Tried resetting SMC and it did not resolve the issue.
    I made a Genius appointment to see if they were familiar with the issue. The iMac passed the in-store diagnostics test; it said all the components were functioning properly. He told me to bring it home to do a fresh re-install of my OS and then run my computer to see if the problem persisted. I took it home and reformatted my HDD with a 35-pass erase, re-installed Snow Leopard (10.6.8) and declined to transfer any backups from Time Machine. I was using a fresh system and sure enough, the problem persited. Tried doing the same thing again but with Lion (10.7.5) and still no luck. So I made another appointment and it passed the in-store diagnostics test again. I let them keep the computer for a 24-hour diagnostics test. They told me they would diagnose my computer with the OS on my HDD as well as a copy of OS that the Apple store deemed 'good' on an external HDD. The Genius called me and told me that my HDD failed their 24-hour diagnostics test and recommended I replace it. I initially had a 750 GB HDD, and the Apple Store could only offer me a 500 GB HDD ($200). I opted to take my computer to Carbon Computing, an authorized dealer in Toronto, to have a 1 TB Seagate HDD ($170) installed with no OS on it. I brought it home, performed another 35-pass erase and installed Snow Leopard. Problem still persisted. Repeated with Lion, still unsuccessful. Looking back, I was so excited that I just had to replace the HDD to fix the problem, I forgot to ask the guy if he could recreate the issue.
    I began to suspect that it was a heating issue. So I installed Temperature Monitor and smcFanControl, and cleaned the fans as much as I could without taking the computer apart. Without smcFC on I tried to recreate the problem and I noticed that the Power Supply Position 1 reached 95 degrees Celsius, and Graphics Processor Temperature Diode reached 97 degrees Celsius before entering sleep mode. I don't know much about temperature sensors and what they monitor specifically, and so I couldn't draw any conclusions from that data. I turned on smcFC and cranked the optical drive speed to 2000 RPM, HDD to 3000, and CPU to 3000. The computer still went to sleep but the temperatures were below 90 degrees Celsius before entering sleep mode. I've tried researching here and on the internet about normal operating temperature ranges of iMacs and generally found that most do reached that temperature but they do not go to sleep mode.
    Then I thought it may be a problem with Lion so I upgraded to Mountain Lion. The issue still persisted. Tried resetting SMC and NVRAM, did not resolve issue.
    I called the same Apple Store explaining to them that their recommendation of replacing the HDD did not resolve the issue. They told me to bring it in and have them check it out again. I went through the same process I did before; the iMac passed all of their diagnostic tests. The Genius told me this time he will test out the RAM. He called me and told me that he could replicate the problem and so he proceeded to put in a stick of 'good' Apple RAM, but the computer would not work. He said the 'good' Apple RAM was damaged, either before or in the process of putting it in. He plugged in my old stick of RAM and the computer worked. He tried to recreate the problem and claimed that the computer ran for over 24 hours with an existing movie on my HDD playing and it did not go to sleep mode. However, once I brought it home I played the same movie right away and it turned off 17 minutes into the movie. Tried resetting SMC and NVRAM again, ran the movie again, still went to sleep.
    And that's the story for now...

    Now to find out WHY it does it at home only. How hot is it at home? Have you checked the AC current/voltage at home?
    Well they were able to replicate the issue at the Apple Store the second time I left my computer there. Anyway, we don't have any heating on at my house at the moment. It's usually from around 20-23 degrees Celsius (72-75 F). Temperature Monitor says ambient temperature is 30 degree C though...
    I'm not really sure how to check the AC current/voltage at home, but my computer worked before I moved it. So I'm not sure if that is the issue.
    I normally only have speakers set up to my computer and a wired keyboard. The speakers are powered separately. I would assume that at the Apple Store only the power cord and wired keyboard are connected.
    What is the Power Supply Position? And what does it do?
    Thanks for your help!

  • How can I select shutdown & close the display w/o going into sleep mode?

    I have learned to wait untill the MBP full shuts down before closing the display. In the past I have pressed shutdown closed the display only to find out later the MBP goes into sleep mode before fully shuting down. When I reopen the display the computer finishes the shutdown process or worse the battery is dead.
    I would like to select shut down, close the display and walk away while the computer completes the shutdown process.
    Is there any setup options or apps. that will allow this?
    Thanks, Joe
    (new to the mac)
    MBP   Mac OS X (10.4.6)  

    Well hello there, and welcome to Macintosh.
    Unfortunately you can't change anything to stop this from happening. The shutdwn process goes about its business killing processes and applications that have been running. The sleep process interrupts ALL business going on in the OS, and puts the machine into low power mode, as it is not aware of the nature of the running processes (in this case, the shutdown process), knowing only that they must be slept and the machine dropped into sleep mode. You gotta wait it out before you close the lid.
    I would suggest sending a message in OS X feedback requesting this as a feature!
    If you find this response helpful or if it solves your issue, please click the appropriate icon in the header of this reply.

  • Ipod Touch Keeps Going Into Recovery Mode

    Hi, I've had an Ipod touch for about 6 months now and haven't really had any problems with it to date. Recently (around the time I installed the 1.1.3 firmware), it seems to be randomly going into recovery mode.
    When I plug it into my imac, Itunes says it detected an ipod in recovery mode, and I have to restore it. During the restore process the screen lights up with apple logo and spinning wheel, it says successful restore. But the ipod doesn't restart... just goes straight back into recovery mode. It usually takes about 2 or 3 restore attempts before it works properly. I resync and everything goes back to normal for a few uses. Then I go to turn it on and nothing... itunes just tells me to restore again.
    Anyone else seen this issue before? I'm pretty sure the batteries aren't flat (since when it finally does restore, they usually start around half full... and I've tried leaving it on the charger for a few hours to no avail). And I only turn wifi on when I need it (usually turned off). I've tried pretty much everything I can find in the help files (hold button, hold+power, hold while connecting to itunes, nothing seems to wake it up... just black screen until a successful restore happens)...
    Thanks in advance...

    I had the same problem with my Touch but it started the first day. It was also doing weird things like telling me the battery was full then half an hour later warn me there was only 10% left. It got better for a while but long syncs with iTunes usually threw it into restore mode again.
    I finally brought it to the Apple store nearby and they were able to recreate the problem when they tried a sync on their machine. They told me it was a hardware issue and did an exchange right there. I have heard bringing it to an Apple Store will increase your chances of an exchange. Sending it in may or may not get you a new one. Good luck.
    Message was edited by: sdutcher

  • Can I use SAP HR to drive ESS Portal user creation?

    Hello
    We are implementing a new instance of SAP HR and Portal for ESS and MSS and I am not sure of all the steps that need to be completed so any guidance / tips would be greatly appreciated.
    Company currently has an LDAP - but not used extensively. Not all employees currently in LDAP as not all have network ids. All employees will have a SAP account to enable ESS (via Kiosks etc).  ESS iViews in Portal will call SAP HR and possibly SAP BW.  We have an instance of SAP already and user admin maintained via CUA - this will continue.
    Scenario:
    My initial thoughts are that we try to use SAP HR as the leading system to drive the ESS Portal users and access.  Basically I want to create the user in SAP and assign them an ESS SAP role... then through syncronization have the user created in the Portal and have the correct ESS Portal assigned (in the Portal)
    My thinking so far is to go the following way;
    1) Create User Master Record in SAP (SU01)
    2) Hire employee into the org structure (via HR processes)
    3) Populate Infotype 0105 with SAP username
    4) Populate Infortype 1016 - with SAP role to be assigned to allow ESS access (not sure about this aspect) or role could be assigned in 1) above
    I am not sure of the next steps - I think there must be a way in an SAP table to map the ESS SAP role to the ESS Portal Role (is this via WP3R?)
    then I am hoping that a standard job can be run (is this RSLDAPSYNC_USER) that will create the user in the Portal (UME?) and assign the correct Portal role ?
    (obviously configuration needed)
    For MSS and HR Power users - we would continue to assign SAP roles via SU01.
    Can anyone assist with;
    - Is my thinking correct in terms of how this should / could work?
    - in SAP how can I map SAP Roles to Portal Roles ?
    - will syncronization in SAP create the user in Portal and assign the role ? what do I need to configure?
    Thanks in advance

    Dear Michale,
    I just dont know if this can throw some light on your prob.'
    In our Orgn we had around 250 ess users and 200 sapr/3 users. Some of the r/3 users also logon to ess via their r/3 uname and password.
    What we have done is like follows:
    1. Created a role for only the ess users ZHRESS. For this i asked the HR functional people with sap_all profile to do all the job which the ESS users are supposed to do and tracer the authorization via tcode st01. We created the role on the basis of this trace report.
    2. For the purely ESS users we created the users via tcode HRUSER and assigned then with the above role.
    3. For the R/3 users who are supposed to avail the ess facility we assigned them with the role ZHRESS role in addition to the other roles assigned to them to carry out their normal R/3 transactions. Then we mapped their R/3 uname to their employee no via PA30 infotype 105.
    4. Tcode HRUSER saved time  which would have consumed had we done it via su01 and moreover it picked Name etc data from the HR master table. In HRUSER tcode , setting the user attributes helps to define what roles the users are to be assigned, what should be their initial password etc.
    Pl let me know if it satisfies you querry.
    Regards

  • BW Authorizations - Query variable with processing mode as "customer exit"

    Hi,
    Iam new to BW authorizations and have not yet worked on customer exit before. I was going through the documentation at various sites but I could not get the end to end description on how the query process( when using a variable for an InfoObject) works in case of customer exit.
    Let's assume that I am using  a query variable with processing mode as "customer exit" and at the exit I  write some code to extract user's authorizations from a z table. if this is the case, then when an end user runs a query,how will the the system know what value needs to be filled in the variable for the requesting user. Are the user details  also sent to the code along with the query variable? If so how. If I mis-understood the process then forgive me and let me know the correct process.

    Hi!
    welcome to SDN!
    customer exit variables need programing by user. so if you create a customer exit variable, you got to right a program which extracts values into this variable. we can do what ever we want in program, SAP will not deal anything ´with customer exits.
    with regards
    ashwin
    PS n:  Assigning point to the helpful answers is the way of saying thanks in SDN.  you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.

Maybe you are looking for